Victron coupling box 16A/230V (2p/3w) for built-in device plug
Product number:
8-67-013390
8-67-013390
5
1
Product number:
8-67-013390
The removable MP16-110 coupling box from Victron Energy (MPN SHP301604000) is designed for use with the MP16-10 built-in plug. The cable size to be used depends on the current.
Features
- Connections: 2p + A
- Voltage: 230V
- Max. current: 16A / 230V
- Housing: PA 6
- Plug pins / connection terminals: Brass, nickel-plated
- Recommended cable cross-section: 1.5mm² - 2.5mm
Safety regulations and measures
- The electrical installation must be switched off during installation
- Install the shore connection in accordance with the installation instructions
- Use cables with the appropriate cross-sections
- Connections and safety precautions must be carried out in accordance with local regulations
Installation instructions
Proceed as follows to attach the plug to the cable:
- Unscrew the plug and slide the housing onto the cable. The grommet can be cut to size.
- Insulate the cable a. Ensure that the cable ends are clean and free of corrosion. If necessary, cut back the cable until clean wire is visible. Do not solder the ends of the cables!
- Insert the cables into the correct color-coded terminal openings on the back of the inlet. Tighten the terminal screws to the specified torque. Ensure that there is no cable insulation under a terminal.
- Tighten the strain relief.
- Slide the housing over the connector. If necessary, apply a small amount of soap to the cable to make the plastic cover easier to slide on. Tighten the mounting screws securely.
Scope of delivery:
1x Victron coupling box 16A (SHP301604000)
Category name:
Installation
Manufacturer:
Victron Energy
Product Type:
Plug
Manufactuerer Information
Victron Energy
Victron Energy B.V.
De Paal 35
1351 JG Almere
Netherlands
Mail: sales@victronenergy.com
Tel.: +31 365359700
8-67-013390
Loading products