Victron MultiPlus-II 48/10000/140-100/100 230V

The Multiplus-II 48/10000/140-100 is a high-end device combination from Victron Energy (MPN PMP483105000) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 100 A and expands the potential range of applications to include ESS applications. The inverter module delivers a full 10000 W with non-linear loads and 8000 W with linear continuous loads. The 48 V battery charger is also very well proportioned with a charging capacity of 140 A and is supplemented by a 100 A transfer switch that allows you to switch back and forth between the AC connections at lightning speed.

Key performance features of the Multiplus-II 48/10000/140-100

• PowerControl and PowerAssist – increase in mains or generator power
• Built-in anti-islanding function and connection option for external current sensor (optional)
• Can be used as a backup device in grid-connected systems for power supply during grid failures
• Can be used in various ESS (energy storage system) applications
• Ideally suited for professional seafaring, yachts, vehicles, and land-based, off-grid applications
• VE.Bus interface for parallel and three-phase operation, remote monitoring, and system integration
• Virtually unlimited power through parallel and three-phase operation
• Can be configured on site or remotely using VEConfigure software*

Technical features

• 10,000 W power with non-linear load 8,000 W continuous load and 18,000 W peak power
• For 48 V battery voltage, 100 A transfer switch, and 140 A battery charger
• Output voltage: 230 VAC, frequency: 50 Hz
• Max. efficiency is 95%, protection class IP22

Always enough power thanks to PowerControl and PowerAssist

A maximum mains or generator current can be set on the MultiPlus-II 48/10000/140-100. The MultiPlus-II then takes other connected AC consumers into account and only uses the "leftover" current to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The PowerAssist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such cases, the MultiPlus-II immediately compensates for insufficient generator, shore power, or mains power with energy from the battery. When the load is reduced, i.e., when consumers are switched off, the energy that is then available again can be used to charge the batteries.

Solar power: AC power even during a power failure

The device can be used with off-grid and grid-connected PV systems as well as other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters.

Maximum flexibility thanks to two AC outputs

The main output ensures uninterrupted operation. In the event of a power failure or interruption of the land/generator power, the MultiPlus-II takes over the supply to the connected consumers. The switchover is so fast (less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when AC power is available at the input of the MultiPlus-II. Loads that must not discharge the battery, such as a water heater, can be connected to this output.

Many options for system expansion

The settings can be changed in a matter of minutes using the VEConfigure software (a computer or laptop and an MK3 USB interface are required for this).Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, Digital Multi control panel.

Remote configuration and monitoring

Install a Color Control GX or other GX products to connect to the Internet. The operating data can be stored and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed.

Scope of delivery:

1x Victron PMP483105000 Multiplus-II 48/10000/140-100A
1x user manual