Victron Phoenix Smart IP43 Charger 12/30(1+1) 120-240V

The Phoenix Smart Charger 12/30(1+1) IP43 from Victron Energy (MPN PSC123051085) is a powerful, latest-generation battery charger. The device is designed for 12V battery voltage and, in addition to the powerful 30A main charging output, also offers a secondary charging output with 3A charging power for a starter battery.

With its integrated Bluetooth module, the Phoenix Smart Charger 12/30(1+1) IP43 fits into Victron's ever-growing Smart family, which can be perfectly networked and centrally controlled in various ways. In addition to the Bluetooth module, it also features a VE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control battery temperature compensation. The proven five-stage charging algorithm and the option to program your own charging algorithm make the Phoenix Smart Charger 12/30(1+1) IP43 a universally applicable high-tech battery charger that can optimally charge almost any type of battery.

perfect battery charger for boats and vehicles

Phoenix Smart battery chargers with (1+1) in the model name have a main charging output with full charging current and a 3A secondary charging output for charging starter batteries. These models are therefore particularly suitable for mobile applications. The Phoenix Smart models with (3) in the model name have been developed specifically with the needs of the marine sector in mind and offer three full current outputs for charging 3 battery banks.

Highlights of the Phoenix Smart Charger 12/30(1+1) IP43

• integrated Bluetooth module
• integrated VE.Direct connections
• 1x 30A main charging output and 1 additional secondary charging output for starter batteries
• automatic voltage compensation
• adaptive, five-stage charging algorithm
• variable constant voltage phase
• optimally charges all common battery types
• Prevents damage from gassing thanks to BatterySafe mode
• reduced aging through storage with storage mode
• also charges LiFePO4 batteries and can be connected to a BMS via optocoupler
• fully programmable charging algorithm
• Remote on/off
• can be used as a power source

technical features of the Phoenix Smart 12/30(1+1)

• Victron part number: PSC123051085
• Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max. 3A charge)
• maximum nominal charging current: 30A, battery voltage: 12V
• high efficiency: 94%
• Protection class: IP43 (electronic components), IP22 (connection area)
• further data can be found in the technical data

three integrated technologies for all-round healthy batteries

variable constant voltage phase: always delivers the right amount of charge

When the battery is slightly discharged (e.g., a yacht connected to shore power), a short constant voltage phase is selected to prevent overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged.

Prevention of damage due to excessive gassing: BatterySafe mode

To shorten the charging time, the highest possible charging current was selected together with a high constant voltage. However, to prevent excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage increase after the gassing voltage has been reached (see also the diagrams in the brochure).

Less maintenance and aging when the battery is idle: storage mode

Storage mode is always activated when there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) to minimize gas development and corrosion on the positive plates. Once a week, the voltage is increased to the gassing voltage level. This achieves a kind of equalization charge that prevents electrolyte stratification and sulfation—the two main causes of premature battery failure.

also perfectly suited for LiFePO4 batteries

The Phoenix Smart Charger 12/30(1+1) IP43 can be equipped with an on/off control by connecting a relay or an optocoupler output with open collector from a Li-Ion BMS to the remote on/off port. Alternatively, voltage and current can also be fully controlled via Bluetooth.

VE.Direct interface, Bluetooth, and programmable relay

The Phoenix Smart Charger 12/30(1+1) IP43 from Victron is ideal for a wired data connection with a Color Control panel, PC, or other devices thanks to the VE.Direct port. Please also note the VictronConnect app for Android and iOS, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. The Programmable Relay can also be programmed via the VE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events.

required accessories

Please note that an AC connection cable is required to connect the Phoenix Smart Charger 12/30(1+1) IP43 to the mains power supply. This is not included in the scope of delivery.

Scope of delivery
1x PSC123051085 Victron Phoenix Smart Charger 12/30(1+1) IP43
1x AC cable clamp
1x User manual