Bluetti Premium 200 V2 Portable Power Station 2073 Wh 2700 W UPS Function

The Bluetti Premium 200 V2 Power Station (MPN: P-PR200V2-EU-GY-20) is your reliable and portable power source. With a capacity of 2,073.6 Wh and a continuous power output of 2,700 W, it provides you with power wherever there’s no outlet within reach. Whether as an emergency power solution at home, while camping, during outdoor activities, or on a construction site, the high-quality LiFePO₄ battery technology ensures an exceptionally long service life and a high level of safety. The power station recharges quickly, offers a wide range of connection options, and can be conveniently controlled via an app.

Powerstation Highlights

• LiFePO₄ battery technology, capacity of 2,073.6 Wh
• 7 ports: 1x cigarette lighter, 2x DC5521, 2x USB-A (15 W each), 2x USB-C (100 W each)
• Flexible charging options: wall outlet, car, generator, solar panel
• Various configuration options: AC charging mode, Power Lifting mode, ECO mode
• UPS function (switchover time ≤ 15 ms) for uninterrupted power supply
• App control via Bluetooth & Wi-Fi—conveniently monitor and control all functions via smartphone
• 5-year warranty; for more information, click here

Your Charging Options – Simply Explained

Wall outlet: You can conveniently charge your power station using a standard wall outlet. Once the battery is fully charged, the device automatically stops charging.
Car (12V / 24V): You can also charge it on the go using your car’s cigarette lighter socket. Note: The car must be turned on while charging to ensure sufficient current flows. Be careful not to drain the car battery too much.
Generator: Alternatively , you can use a generator to charge the battery. The charging process ends automatically as soon as the battery is fully charged. Note: Use a pure sine wave generator that provides the correct voltage and frequency and meets the requirements of your Premium 200 V2. It’s best to enable the grid auto-adjustment mode when charging with a generator. If the generator’s output is too low, you can set the maximum charging current in the app.
Solar panels: You can also charge your Premium 200 V2 in an environmentally friendly wayusing solar panels. Connect the solar panels either in series or in parallel and connect them to your device using a solar charging cable. Note: The panels should have the following specifications:

• Voltage between 12 V and 60 V
• Current: maximum 20 A
• Maximum power: 1000 W

Configuration via buttons or app

Settings Mode: Here you can adjust general settings for the power bank, such as frequency, AC charging mode, Power-Lifting mode, ECO mode, Bluetooth, or Wi-Fi.
AC charging mode: Standard, Turbo, and Silent. By default, the device charges in Standard mode. For faster charging, you can select Turbo mode, while Silent mode operates particularly quietly but also more slowly.
Power-Lifting Mode: This mode is initially turned off. When activated, your power station can power purely resistive devices—such as kettles, electric blankets, hair dryers, or other heating appliances—with a power rating of up to 4,050 W.
ECO Mode: The ECO modes for AC (alternating current) and DC (direct current) are enabled by default. So if you’re not using any power—or very little—for an extended period, the unit automatically shuts off the respective output. This saves energy and protects your battery.

UPS Function – Power Supply and Smart Switching

Simply plug your Premium 200 V2 into a wall outlet. Your connected devices will then be powered directly from the utility grid. In the event of a power outage, it switches to battery power in a flash—within 15 milliseconds—so everything keeps running. You can conveniently set the various UPS modes in the app.

Standard Mode: In Standard Mode, the battery charges using a combination of solar power and grid power. Solar power always takes priority. As long as power is coming from the outlet, your devices are powered directly by it. If the power goes out, the power station automatically takes over.
Time-Control Mode: It charges automatically during off-peak nighttime rates and supplies power during the day when electricity is more expensive.
PV Priority Mode: This mode focuses on using solar energy. Initially, the battery charges via the grid up to a certain state of charge, and then automatically switches to solar charging.
Custom Mode: Set your own charging and discharging schedule, define custom limits for the battery’s state of charge, and adjust schedules and grid settings to suit your needs.

Smart Control & Full Control

Conveniently control and monitor the Powerstation via the app using Bluetooth or Wi-Fi. The app allows you to turn outputs on and off, monitor charge levels, and adjust settings. The clear display shows you all important information about battery level, inputs and outputs, and charge status in real time.

Technical Specifications

DC Output

• 12 V/10 A vehicle power outlet
• 2x USB-A: 5 V/3 A
• 2x USB-C (PD 3.0): 100 W max. per port, 5–20 V/3–5 A
• AC Charging: 230 V, 10 A max., 2300 W max. (80% in 1 hour, 100% in 1.4 hours at 10–30 °C)
• AC input: 2300 W max. (charging + bypass)
• DC input (XT60PM-M): 1,000 W max., 12–60 V, 20 A max.
• AC + DC input: 2,400 W max.
• Switching time: ≤15 ms

General

• Battery capacity: 2073.6 Wh (54 Ah)
• Battery type: LiFePO4
• Charging temperature: 0°C – +40°C
• Discharge temperature: -20°C – +40°C
• Storage temperature
  • Up to 1 month: -10°C – +40°C
  • Longer than 1 month: -10°C to +35°C
• AC output: 2,700 W total, 230 V/11.7 A, 50 Hz / 60 Hz
• Weight: 24.2 kg
• Dimensions: 350 x 250 x 323.6 mm

Package Contents

1x Premium 200 V2 Portable Power Station
Grounding screw