Phoenix Smart IP43 Charger
- Batteries
- Electronics
- Generators
- Installation
- Complete Systems
-
Brands
- AEconversion
- Bluetti
- BYD
- Canadian Solar
- EcoFlow
- EFOY
- Fothermo
- Growatt
- Hoymiles
- Huawei
- JA Solar
- Jinko Solar
- Kemo
- Lapp
- Longi
- Luxen Solar
- Mastervolt
- myStrom
- Offgridtec
- Pylontech
- Pytes
- Risen
- Steca
- Trina Solar
- Victron Energy
- Votronic
- Wattstone
- Wieland Electric
- Yingli
- Zendure
Filter
–
Phoenix Smart IP43 Charger
9 Results
Sorting
1-67-012465
Victron Phoenix Smart ip43 Charger 12/50(3)
The Phoenix Smart Charger 12/50(3) ip43 from victron Energy (mpn psc125053085) is a powerful latest generation battery charger. The device is designed for 12v battery voltage and offers 3 charging outputs, each of which is capable of delivering full charging current With its integrated Bluetooth module, the Phoenix Smart Charger 12/50(3) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various ways. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 12/50(3) ip43 a universally applicable high-tech battery charger that can optimally charge almost any type of battery perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 12/50(3) ip43 integrated Bluetooth module integrated vE.Direct connectors 3x 50a charging outputs are available (maximum 50a charging current) automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc125053085 Number of battery banks: 3 (Each output can output the full charging power of the device) maximum rated charging current: 50a, battery voltage: 12v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then lowered to 2.2 v/cell (13.2 v for a 24-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 12/50(3) ip43 can be fitted with on/off control by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 12/50(3) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC power cord is required to connect the Phoenix Smart Charger 12/50(3) ip43 to the mains. This is not included in the scope of delivery Scope of delivery 1x psc125053085 victron Phoenix Smart Charger 12/50(3) ip43 1x AC cable clamp 1x user manual
The Phoenix Smart Charger 12/50(3) ip43 from victron Energy (mpn psc125053085) is a powerful latest generation battery charger. The device is designed...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012465
Victron Phoenix Smart ip43 Charger 12/50(3)
The Phoenix Smart Charger 12/50(3) ip43 from victron Energy (mpn psc125053085) is a powerful latest generation battery charger. The device is designed for 12v battery voltage and offers 3 charging outputs, each of which is capable of delivering full charging current With its integrated Bluetooth module, the Phoenix Smart Charger 12/50(3) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various ways. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 12/50(3) ip43 a universally applicable high-tech battery charger that can optimally charge almost any type of battery perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 12/50(3) ip43 integrated Bluetooth module integrated vE.Direct connectors 3x 50a charging outputs are available (maximum 50a charging current) automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc125053085 Number of battery banks: 3 (Each output can output the full charging power of the device) maximum rated charging current: 50a, battery voltage: 12v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then lowered to 2.2 v/cell (13.2 v for a 24-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 12/50(3) ip43 can be fitted with on/off control by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 12/50(3) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC power cord is required to connect the Phoenix Smart Charger 12/50(3) ip43 to the mains. This is not included in the scope of delivery Scope of delivery 1x psc125053085 victron Phoenix Smart Charger 12/50(3) ip43 1x AC cable clamp 1x user manual
Shipped in 1-3 days
1-67-012450
Victron Phoenix Smart ip43 Charger 12/30(1+1)
The Phoenix Smart Charger 12/30(1+1) ip43 from victron Energy (mpn psc123051085) is a powerful battery charger of the latest generation. The device is designed for 12v battery voltage and offers besides the powerful 30a main charge output also a secondary charge output with 3a charge power for a starter battery With its integrated Bluetooth module, the Phoenix Smart Charger 12/30(1+1) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various channels. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 12/30(1+1) ip43 a universally applicable high-tech battery charger that can optimally charge almost any battery type perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 12/30(1+1) ip43 integrated bluetooth module integrated vE.Direct connectors 1x 30a main charge output and 1 additional secondary charge output for starter batteries automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc123051085 Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max. 3a charge) maximum rated charge current: 30a, battery voltage: 12v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then lowered to 2.2 v/cell (13.2 v for a 24-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 12/30(1+1) ip43 can have on/off control attached by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 12/30(1+1) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC power cord is required to connect the Phoenix Smart Charger 12/30(1+1) ip43 to the mains. This is not included in the scope of delivery Scope of delivery 1x psc123051085 victron Phoenix Smart Charger 12/30(1+1) ip43 1x AC cable clamp 1x user manual
The Phoenix Smart Charger 12/30(1+1) ip43 from victron Energy (mpn psc123051085) is a powerful battery charger of the latest generation. The device is...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012450
Victron Phoenix Smart ip43 Charger 12/30(1+1)
The Phoenix Smart Charger 12/30(1+1) ip43 from victron Energy (mpn psc123051085) is a powerful battery charger of the latest generation. The device is designed for 12v battery voltage and offers besides the powerful 30a main charge output also a secondary charge output with 3a charge power for a starter battery With its integrated Bluetooth module, the Phoenix Smart Charger 12/30(1+1) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various channels. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 12/30(1+1) ip43 a universally applicable high-tech battery charger that can optimally charge almost any battery type perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 12/30(1+1) ip43 integrated bluetooth module integrated vE.Direct connectors 1x 30a main charge output and 1 additional secondary charge output for starter batteries automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc123051085 Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max. 3a charge) maximum rated charge current: 30a, battery voltage: 12v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then lowered to 2.2 v/cell (13.2 v for a 24-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 12/30(1+1) ip43 can have on/off control attached by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 12/30(1+1) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC power cord is required to connect the Phoenix Smart Charger 12/30(1+1) ip43 to the mains. This is not included in the scope of delivery Scope of delivery 1x psc123051085 victron Phoenix Smart Charger 12/30(1+1) ip43 1x AC cable clamp 1x user manual
Shipped in 1-3 days
1-67-012460
Victron Phoenix Smart ip43 Charger 12/50(1+1)
The Phoenix Smart Charger 12/50(1+1) ip43 from victron Energy (mpn psc125051085) is a powerful battery charger of the latest generation. The device is designed for 12v battery voltage and offers besides the strong 50a main charge output also a secondary charge output with 3a charge power for a starter battery With its integrated Bluetooth module, the Phoenix Smart Charger 12/50(1+1) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various channels. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 12/50(1+1) ip43 a universally applicable high-tech battery charger that can optimally charge almost any battery type perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 12/50(1+1) ip43 integrated bluetooth module integrated vE.Direct connectors 1x 50a main charge output and 1 additional secondary charge output for starter batteries automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc125051085 Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max. 3a charge) maximum rated charge current: 50a, battery voltage: 12v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then lowered to 2.2 v/cell (13.2 v for a 24-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 12/50(1+1) ip43 can have on/off control attached by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 12/50(1+1) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC connection cable is required to connect the Phoenix Smart Charger 12/50(1+1) ip43 to the mains. This is not included in the scope of delivery Scope of delivery 1x psc125051085 victron Phoenix Smart Charger 12/50(1+1) ip43 1x AC cable clamp 1x user manual
The Phoenix Smart Charger 12/50(1+1) ip43 from victron Energy (mpn psc125051085) is a powerful battery charger of the latest generation. The device is...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012460
Victron Phoenix Smart ip43 Charger 12/50(1+1)
The Phoenix Smart Charger 12/50(1+1) ip43 from victron Energy (mpn psc125051085) is a powerful battery charger of the latest generation. The device is designed for 12v battery voltage and offers besides the strong 50a main charge output also a secondary charge output with 3a charge power for a starter battery With its integrated Bluetooth module, the Phoenix Smart Charger 12/50(1+1) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various channels. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 12/50(1+1) ip43 a universally applicable high-tech battery charger that can optimally charge almost any battery type perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 12/50(1+1) ip43 integrated bluetooth module integrated vE.Direct connectors 1x 50a main charge output and 1 additional secondary charge output for starter batteries automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc125051085 Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max. 3a charge) maximum rated charge current: 50a, battery voltage: 12v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then lowered to 2.2 v/cell (13.2 v for a 24-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 12/50(1+1) ip43 can have on/off control attached by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 12/50(1+1) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC connection cable is required to connect the Phoenix Smart Charger 12/50(1+1) ip43 to the mains. This is not included in the scope of delivery Scope of delivery 1x psc125051085 victron Phoenix Smart Charger 12/50(1+1) ip43 1x AC cable clamp 1x user manual
Shipped in 1-3 days
1-67-012455
Victron Phoenix Smart ip43 Charger 12/30(3)
The Phoenix Smart Charger 12/30(3) ip43 from victron Energy (mpn psc123053085) is a powerful latest generation battery charger. The device is designed for 12v battery voltage and offers 3 charging outputs, each of which is capable of delivering full charging current With its integrated Bluetooth module, the Phoenix Smart Charger 12/30(3) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various ways. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 12/30(3) ip43 a universally applicable high-tech battery charger that can optimally charge almost any type of battery perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 12/30(3) ip43 integrated Bluetooth module integrated vE.Direct connectors 3x 30a charging outputs are available (maximum 30a charging current) automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc123053085 Number of battery banks: 3 (Each output can output the full charging power of the device) maximum rated charging current: 30a, battery voltage: 12v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then lowered to 2.2 v/cell (13.2 v for a 24-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 12/30(3) ip43 can have on/off control attached by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 12/30(3) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC power cord is required to connect the Phoenix Smart Charger 12/30(3) ip43 to AC power. This is not included in the scope of delivery Scope of delivery 1x psc123053085 victron Phoenix Smart Charger 12/30(3) ip43 1x AC cable clamp 1x user manual
The Phoenix Smart Charger 12/30(3) ip43 from victron Energy (mpn psc123053085) is a powerful latest generation battery charger. The device is designed...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012455
Victron Phoenix Smart ip43 Charger 12/30(3)
The Phoenix Smart Charger 12/30(3) ip43 from victron Energy (mpn psc123053085) is a powerful latest generation battery charger. The device is designed for 12v battery voltage and offers 3 charging outputs, each of which is capable of delivering full charging current With its integrated Bluetooth module, the Phoenix Smart Charger 12/30(3) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various ways. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 12/30(3) ip43 a universally applicable high-tech battery charger that can optimally charge almost any type of battery perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 12/30(3) ip43 integrated Bluetooth module integrated vE.Direct connectors 3x 30a charging outputs are available (maximum 30a charging current) automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc123053085 Number of battery banks: 3 (Each output can output the full charging power of the device) maximum rated charging current: 30a, battery voltage: 12v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then lowered to 2.2 v/cell (13.2 v for a 24-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 12/30(3) ip43 can have on/off control attached by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 12/30(3) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC power cord is required to connect the Phoenix Smart Charger 12/30(3) ip43 to AC power. This is not included in the scope of delivery Scope of delivery 1x psc123053085 victron Phoenix Smart Charger 12/30(3) ip43 1x AC cable clamp 1x user manual
Shipped in 1-3 days
1-67-012470
Victron Phoenix Smart ip43 Charger 24/16(1+1)
The Phoenix Smart Charger 24/16(1+1) ip43 from victron Energy (mpn psc241651085) is a powerful battery charger of the latest generation. The device is designed for 24v battery voltage and offers besides the powerful 16a main charge output also a secondary charge output with 3a charge power for a starter battery With its integrated Bluetooth module, the Phoenix Smart Charger 24/16(1+1) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various channels. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 24/16(1+1) ip43 a universally applicable high-tech battery charger that can optimally charge almost any battery type perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 24/16(1+1) ip43 integrated bluetooth module integrated vE.Direct connectors 1x 16a main charge output and 1 additional secondary charge output for starter batteries automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc241651085 Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max. 3a charge) maximum rated charge current: 16a, battery voltage: 24v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge maintenance voltage is then lowered to 2.2 v/cell (13.2 v for a 12-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 24/16(1+1) ip43 can have on/off control attached by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 24/16(1+1) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC power cord is required to connect the Phoenix Smart Charger 24/16(1+1) ip43 to the mains. This is not included in the scope of delivery Scope of delivery 1x psc241651085 victron Phoenix Smart Charger 24/16(1+1) ip43 1x AC cable clamp 1x user manual
The Phoenix Smart Charger 24/16(1+1) ip43 from victron Energy (mpn psc241651085) is a powerful battery charger of the latest generation. The device is...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012470
Victron Phoenix Smart ip43 Charger 24/16(1+1)
The Phoenix Smart Charger 24/16(1+1) ip43 from victron Energy (mpn psc241651085) is a powerful battery charger of the latest generation. The device is designed for 24v battery voltage and offers besides the powerful 16a main charge output also a secondary charge output with 3a charge power for a starter battery With its integrated Bluetooth module, the Phoenix Smart Charger 24/16(1+1) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various channels. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 24/16(1+1) ip43 a universally applicable high-tech battery charger that can optimally charge almost any battery type perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 24/16(1+1) ip43 integrated bluetooth module integrated vE.Direct connectors 1x 16a main charge output and 1 additional secondary charge output for starter batteries automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc241651085 Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max. 3a charge) maximum rated charge current: 16a, battery voltage: 24v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge maintenance voltage is then lowered to 2.2 v/cell (13.2 v for a 12-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 24/16(1+1) ip43 can have on/off control attached by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 24/16(1+1) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC power cord is required to connect the Phoenix Smart Charger 24/16(1+1) ip43 to the mains. This is not included in the scope of delivery Scope of delivery 1x psc241651085 victron Phoenix Smart Charger 24/16(1+1) ip43 1x AC cable clamp 1x user manual
Shipped in 1-3 days
1-67-016240
Victron Phoenix Smart IP43 Charger 12/50(1+1) 120-240V
Der Phoenix Smart IP43 Charger 12/50 (1+1) 120-240V von Victron Energy (MPN PSC125051095) ist ein leistungsstarkes Batterieladegerät der neuesten Generation. Das Gerät ist speziell für 12V Batteriespannung ausgelegt und bietet einen starken Hauptladeausgang von 50A sowie einen zusätzlichen Nebenladeausgang mit 3A Ladeleistung für eine Starterbatterie. Zusätzlich ist das Ladegerät mit einem universellen 120-240V-Anschluss ausgestattet, der eine einfache und bequeme Installation ermöglicht. Das Ladegerät ist kompatibel mit verschiedenen Steckertypen und lässt sich in Ihr vorhandenes Stromnetz integrieren.
Der Phoenix Smart IP43
integriertes Bluetooth-Modul
integrierte VE.Direct Anschlüsse
50A Hauptladeausgang + 3A Nebenladeausgang
automatische Spannungskompensation
adaptiver, fünfstufiger Ladealgorithmus
geeignet für LiFePO4 Batterien
optimale Ladung aller gängigen Batteriearten
als Stromquelle einsetzbar
variable Konstantspannungsphase
Integrierter BatterySafe- & Lagerungs-Modus
BMS Verbindung über Optokoppler möglich
Remote Ein/Aus
Worin besteht der Unterschied zum Modell PSC125051085?
Die wesentlichen Unterschiede zum Victron Phoenix Smart IP43 Charger 12/50 (1+1) PSC125051085:
Eingangsspannung: Während dieses Modell (PSC125051095) eine Eingangsspannung von 120-240 VAC unterstützt, ist das Modell PSC125051085 speziell für eine Eingangsspannung von 230 VAC ausgelegt.
Anschlussmöglichkeiten: Dieses Modell (PSC125051095) verfügt über einen universellen 120-240 V-Anschluss, der für verschiedene Steckertypen geeignet ist. Im Gegensatz dazu ist das Modell PSC125051085 mit einem Victron VE.Direct-Anschluss ausgestattet.
Flexibel und individuell
Mit dem integrierten Bluetooth-Modul ist der Phoenix Smart IP43 Charger 12/50 (1+1) 120-240V Bestandteil der immer größer werdenden Smart-Familie von Victron Energy, die eine perfekte Vernetzung und zentrale Steuerung ermöglicht. Auch der universellen 120-240V-Anschluss und das frei programmierbare Relais sorgen für zusätzliche Flexibilität. Der optionale Anschluss der Smart Battery Sense ermöglicht die Batterie-Temperatur auszugleichen. Dank des bewährten fünfstufigen Ladealgorithmus und der Option, einen individuellen Ladealgorithmus zu programmieren, ist der Phoenix Smart IP43 Charger 12/50 (1+1) 120-240V ein vielseitig einsetzbarer High-Tech-Batterielader, der nahezu jeden Batterietyp optimal aufladen kann.
Perfekt für Boote und Fahrzeuge
Phoenix Smart Batterieladegeräte mit dem Zusatz (1+1) im Modellnamen sind optimal für den mobilen Einsatz geeignet. Sie verfügen über einen Hauptladeausgang mit vollem Ladestrom sowie einen 3A Nebenladeausgang, der speziell für das Laden von Starterbatterien ausgelegt ist. Folglich weist der Nebenladeausgang eine etwas niedrigere Ausgangsspannung auf, um die in der Regel vollständige Ladung der Starterbatterie beizubehalten. Dies stellt sicher, dass die Starterbatterie stets einsatzbereit ist, während gleichzeitig die Hauptbatterien optimal geladen werden.
Gesunde Batterien durch innovative Technologie
Mit diesen Technologien sorgen die Victron Phoenix Smart Batterieladegeräte für optimale Leistung und die Langlebigkeit der Batterien:
Die variable Konstantspannungsphase passt die Lademenge an, um eine Überladung bei geringer Batterieentladung zu vermeiden und sicherzustellen, dass die Batterie nach einer Tiefentladung vollständig aufgeladen wird.
Der BatterySafe-Modus schützt vor Schäden durch übermäßige Gasentwicklung, indem er den Spannungsanstieg begrenzt, sobald die Gasungsspannung erreicht ist.
Der Lagerungs-Modus verringert die Wartung und Alterung im Ruhezustand der Batterie, indem er eine niedrigere Ladeerhaltungsspannung verwendet, um Gasentwicklung und Korrosion zu minimieren, und regelmäßig eine Ausgleichsladung durchführt, um Elektrolytschichtung und Sulfatierung zu verhindern.
Technische Daten
Victron Teilenummer: PSC125051095
Anzahl der Batteriebänke: 1+1 (Hauptausgang + 3A Nebenladeausgang)
maximaler Nenn-Ladestrom: 50A
Batteriespannung: 12V
hoher Wirkungsgrad: 94%
Schutzklasse: IP43
Gewicht: 3,7 kg
Abmessung: 145×275×245 mm
Zubehör
Bitte beachten Sie, dass zum Anschuss des Phoenix Smart IP43 Charger 12/50 (1+1) 120-240V an das Stromnetz ein AC-Anschlusskabel benötigt wird. Dieses ist nicht im Lieferumfang enthalten.
Lieferumfang
1× PSC125051095 Victron Phoenix Smart IP43 Charger 12/50 (1+1) 120-240V
Der Phoenix Smart IP43 Charger 12/50 (1+1) 120-240V von Victron Energy (MPN PSC125051095) ist ein leistungsstarkes Batterieladegerät der neuesten...
Shipped in 1-3 days
Shipped in 1-3 days
Der Phoenix Smart IP43 Charger 12/50 (1+1) 120-240V von Victron Energy (MPN PSC125051095) ist ein leistungsstarkes Batterieladegerät der neuesten Generation. Das Gerät ist speziell für 12V Batteriespannung ausgelegt und bietet einen starken Hauptladeausgang von 50A sowie einen zusätzlichen Nebenladeausgang mit 3A Ladeleistung für eine Starterbatterie. Zusätzlich ist das Ladegerät mit einem universellen 120-240V-Anschluss ausgestattet, der eine einfache und bequeme Installation ermöglicht. Das Ladegerät ist kompatibel mit verschiedenen Steckertypen und lässt sich in Ihr vorhandenes Stromnetz integrieren.
Der Phoenix Smart IP43
integriertes Bluetooth-Modul
integrierte VE.Direct Anschlüsse
50A Hauptladeausgang + 3A Nebenladeausgang
automatische Spannungskompensation
adaptiver, fünfstufiger Ladealgorithmus
geeignet für LiFePO4 Batterien
optimale Ladung aller gängigen Batteriearten
als Stromquelle einsetzbar
variable Konstantspannungsphase
Integrierter BatterySafe- & Lagerungs-Modus
BMS Verbindung über Optokoppler möglich
Remote Ein/Aus
Worin besteht der Unterschied zum Modell PSC125051085?
Die wesentlichen Unterschiede zum Victron Phoenix Smart IP43 Charger 12/50 (1+1) PSC125051085:
Eingangsspannung: Während dieses Modell (PSC125051095) eine Eingangsspannung von 120-240 VAC unterstützt, ist das Modell PSC125051085 speziell für eine Eingangsspannung von 230 VAC ausgelegt.
Anschlussmöglichkeiten: Dieses Modell (PSC125051095) verfügt über einen universellen 120-240 V-Anschluss, der für verschiedene Steckertypen geeignet ist. Im Gegensatz dazu ist das Modell PSC125051085 mit einem Victron VE.Direct-Anschluss ausgestattet.
Flexibel und individuell
Mit dem integrierten Bluetooth-Modul ist der Phoenix Smart IP43 Charger 12/50 (1+1) 120-240V Bestandteil der immer größer werdenden Smart-Familie von Victron Energy, die eine perfekte Vernetzung und zentrale Steuerung ermöglicht. Auch der universellen 120-240V-Anschluss und das frei programmierbare Relais sorgen für zusätzliche Flexibilität. Der optionale Anschluss der Smart Battery Sense ermöglicht die Batterie-Temperatur auszugleichen. Dank des bewährten fünfstufigen Ladealgorithmus und der Option, einen individuellen Ladealgorithmus zu programmieren, ist der Phoenix Smart IP43 Charger 12/50 (1+1) 120-240V ein vielseitig einsetzbarer High-Tech-Batterielader, der nahezu jeden Batterietyp optimal aufladen kann.
Perfekt für Boote und Fahrzeuge
Phoenix Smart Batterieladegeräte mit dem Zusatz (1+1) im Modellnamen sind optimal für den mobilen Einsatz geeignet. Sie verfügen über einen Hauptladeausgang mit vollem Ladestrom sowie einen 3A Nebenladeausgang, der speziell für das Laden von Starterbatterien ausgelegt ist. Folglich weist der Nebenladeausgang eine etwas niedrigere Ausgangsspannung auf, um die in der Regel vollständige Ladung der Starterbatterie beizubehalten. Dies stellt sicher, dass die Starterbatterie stets einsatzbereit ist, während gleichzeitig die Hauptbatterien optimal geladen werden.
Gesunde Batterien durch innovative Technologie
Mit diesen Technologien sorgen die Victron Phoenix Smart Batterieladegeräte für optimale Leistung und die Langlebigkeit der Batterien:
Die variable Konstantspannungsphase passt die Lademenge an, um eine Überladung bei geringer Batterieentladung zu vermeiden und sicherzustellen, dass die Batterie nach einer Tiefentladung vollständig aufgeladen wird.
Der BatterySafe-Modus schützt vor Schäden durch übermäßige Gasentwicklung, indem er den Spannungsanstieg begrenzt, sobald die Gasungsspannung erreicht ist.
Der Lagerungs-Modus verringert die Wartung und Alterung im Ruhezustand der Batterie, indem er eine niedrigere Ladeerhaltungsspannung verwendet, um Gasentwicklung und Korrosion zu minimieren, und regelmäßig eine Ausgleichsladung durchführt, um Elektrolytschichtung und Sulfatierung zu verhindern.
Technische Daten
Victron Teilenummer: PSC125051095
Anzahl der Batteriebänke: 1+1 (Hauptausgang + 3A Nebenladeausgang)
maximaler Nenn-Ladestrom: 50A
Batteriespannung: 12V
hoher Wirkungsgrad: 94%
Schutzklasse: IP43
Gewicht: 3,7 kg
Abmessung: 145×275×245 mm
Zubehör
Bitte beachten Sie, dass zum Anschuss des Phoenix Smart IP43 Charger 12/50 (1+1) 120-240V an das Stromnetz ein AC-Anschlusskabel benötigt wird. Dieses ist nicht im Lieferumfang enthalten.
Lieferumfang
1× PSC125051095 Victron Phoenix Smart IP43 Charger 12/50 (1+1) 120-240V
Shipped in 1-3 days
1-67-012475
Victron Phoenix Smart ip43 Charger 24/16(3)
The Phoenix Smart Charger 24/16(3) ip43 from victron Energy (mpn psc241653085) is a powerful latest generation battery charger. The device is designed for 24v battery voltage and offers 3 charging outputs, each of which is capable of delivering full charging current With its integrated Bluetooth module, the Phoenix Smart Charger 24/16(3) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various channels. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 24/16(3) ip43 a universally applicable high-tech battery charger that can optimally charge almost any battery type perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 24/16(3) ip43 integrated Bluetooth module integrated vE.Direct connectors 3x 16a charging outputs are available (maximum 16a charging current) automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc241653085 Number of battery banks: 3 (Each output can output the full charging power of the device) maximum rated charging current: 16a, battery voltage: 24v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge maintenance voltage is then lowered to 2.2 v/cell (13.2 v for a 12-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 24/16(3) ip43 allows on/off control to be attached by connecting a relay or optocoupler open collector output from a Li-ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 24/16(3) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC power cord is required to connect the Phoenix Smart Charger 24/16(3) ip43 to AC power. This is not included in the scope of delivery Scope of delivery 1x psc241653085 victron Phoenix Smart Charger 24/16(3) ip43 1x AC cable clamp 1x user manual
The Phoenix Smart Charger 24/16(3) ip43 from victron Energy (mpn psc241653085) is a powerful latest generation battery charger. The device is designed...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012475
Victron Phoenix Smart ip43 Charger 24/16(3)
The Phoenix Smart Charger 24/16(3) ip43 from victron Energy (mpn psc241653085) is a powerful latest generation battery charger. The device is designed for 24v battery voltage and offers 3 charging outputs, each of which is capable of delivering full charging current With its integrated Bluetooth module, the Phoenix Smart Charger 24/16(3) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various channels. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 24/16(3) ip43 a universally applicable high-tech battery charger that can optimally charge almost any battery type perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 24/16(3) ip43 integrated Bluetooth module integrated vE.Direct connectors 3x 16a charging outputs are available (maximum 16a charging current) automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc241653085 Number of battery banks: 3 (Each output can output the full charging power of the device) maximum rated charging current: 16a, battery voltage: 24v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge maintenance voltage is then lowered to 2.2 v/cell (13.2 v for a 12-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 24/16(3) ip43 allows on/off control to be attached by connecting a relay or optocoupler open collector output from a Li-ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 24/16(3) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC power cord is required to connect the Phoenix Smart Charger 24/16(3) ip43 to AC power. This is not included in the scope of delivery Scope of delivery 1x psc241653085 victron Phoenix Smart Charger 24/16(3) ip43 1x AC cable clamp 1x user manual
Shipped in 1-3 days
1-67-012480
Victron Phoenix Smart ip43 Charger 24/25(1+1)
The Phoenix Smart Charger 24/25(1+1) ip43 from victron Energy (mpn psc242551085) is a powerful battery charger of the latest generation. The device is designed for 24v battery voltage and offers besides the powerful 25a main charge output also a secondary charge output with 3a charge power for a starter battery With its integrated Bluetooth module, the Phoenix Smart Charger 24/25(1+1) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various channels. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 24/25(1+1) ip43 a universally applicable high-tech battery charger that can optimally charge almost any battery type perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 24/25(1+1) ip43 integrated bluetooth module integrated vE.Direct connectors 1x 25a main charge output and 1 additional auxiliary charge output for starter batteries automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc242551085 Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max. 3a charge) maximum rated charge current: 25a, battery voltage: 24v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then lowered to 2.2 v/cell (13.2 v for a 12-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 24/25(1+1) ip43 can have on/off control attached by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 24/25(1+1) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC connection cable is required to connect the Phoenix Smart Charger 24/25(1+1) ip43 to the mains. This is not included in the scope of delivery Scope of delivery 1x psc242551085 victron Phoenix Smart Charger 24/25(1+1) ip43 1x AC cable clamp 1x user manual
The Phoenix Smart Charger 24/25(1+1) ip43 from victron Energy (mpn psc242551085) is a powerful battery charger of the latest generation. The device is...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012480
Victron Phoenix Smart ip43 Charger 24/25(1+1)
The Phoenix Smart Charger 24/25(1+1) ip43 from victron Energy (mpn psc242551085) is a powerful battery charger of the latest generation. The device is designed for 24v battery voltage and offers besides the powerful 25a main charge output also a secondary charge output with 3a charge power for a starter battery With its integrated Bluetooth module, the Phoenix Smart Charger 24/25(1+1) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various channels. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 24/25(1+1) ip43 a universally applicable high-tech battery charger that can optimally charge almost any battery type perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 24/25(1+1) ip43 integrated bluetooth module integrated vE.Direct connectors 1x 25a main charge output and 1 additional auxiliary charge output for starter batteries automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source phoenix Smart 12/30(1+1) technical features victron Part number: psc242551085 Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max. 3a charge) maximum rated charge current: 25a, battery voltage: 24v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data three integrated technologies for all around healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure) Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then lowered to 2.2 v/cell (13.2 v for a 12-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. also perfect for LiFePO4 battery The Phoenix Smart Charger 24/25(1+1) ip43 can have on/off control attached by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 24/25(1+1) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and ios, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events accessories needed Please note that an AC connection cable is required to connect the Phoenix Smart Charger 24/25(1+1) ip43 to the mains. This is not included in the scope of delivery Scope of delivery 1x psc242551085 victron Phoenix Smart Charger 24/25(1+1) ip43 1x AC cable clamp 1x user manual
Shipped in 1-3 days
1-67-012485
Victron Phoenix Smart ip43 Charger 24/25(3)
The Phoenix Smart Charger 24/25(3) ip43 from victron Energy (mpn psc242553085) is a powerful latest generation battery charger. The device is designed for 24v battery voltage and offers 3 charging outputs, each of which is capable of delivering full charging current. With its integrated Bluetooth module, the Phoenix Smart Charger 24/25(3) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various channels. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 24/25(3) ip43 a universally applicable high-tech battery charger that can optimally charge almost any type of battery. Perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 24/25(3) ip43 integrated Bluetooth module integrated vE.Direct connectors 3x 25a charging outputs are available (maximum 25a charging current) automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source optional 2m ac Anschlusskabel cee 7/7 für Smart ip43 Charger phoenix Smart 12/30(1+1) technical features victron Part number: psc242553085 Number of battery banks: 3 (Each output can output the full charging power of the device) maximum rated charging current: 25a, battery voltage: 24v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data Three integrated technologies for all-round healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure). Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then lowered to 2.2 v/cell (13.2 v for a 12-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Also perfect for LiFePO4 battery The Phoenix Smart Charger 24/25(3) ip43 can have on/off control attached by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth. vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 24/25(3) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and iOS, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events. Required accessories Please note that an ac connection cable is required to connect the Phoenix Smart Charger 24/25(3) ip43 to the mains. This is not included in the scope of delivery. Scope of delivery 1x psc242553085 victron Phoenix Smart Charger 24/25(3) ip43 1x ac cable clamp 1x user manual
The Phoenix Smart Charger 24/25(3) ip43 from victron Energy (mpn psc242553085) is a powerful latest generation battery charger. The device is designed...
Soon available again
Soon available again
1-67-012485
Victron Phoenix Smart ip43 Charger 24/25(3)
The Phoenix Smart Charger 24/25(3) ip43 from victron Energy (mpn psc242553085) is a powerful latest generation battery charger. The device is designed for 24v battery voltage and offers 3 charging outputs, each of which is capable of delivering full charging current. With its integrated Bluetooth module, the Phoenix Smart Charger 24/25(3) ip43 fits into the ever-growing Smart family from victron, which can be perfectly networked and also centrally controlled via various channels. In addition to the Bluetooth module, there is also a vE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the possibility to program your own charging algorithm make the Phoenix Smart Charger 24/25(3) ip43 a universally applicable high-tech battery charger that can optimally charge almost any type of battery. Perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which include (1+1) in the model name, have a main charge output, with full charge current and a 3a auxiliary charge output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name are especially designed with marine needs in mind and provide three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 24/25(3) ip43 integrated Bluetooth module integrated vE.Direct connectors 3x 25a charging outputs are available (maximum 25a charging current) automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase charges all common battery types optimally prevention of damage due to gassing thanks to BatterySafe mode reduced aging due to storage with the storage mode also charges LiFePO4 batteries and can be connected to a bms via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source optional 2m ac Anschlusskabel cee 7/7 für Smart ip43 Charger phoenix Smart 12/30(1+1) technical features victron Part number: psc242553085 Number of battery banks: 3 (Each output can output the full charging power of the device) maximum rated charging current: 25a, battery voltage: 24v high efficiency: 94% Protection class: ip43 (electronic components), ip22 (connection area) further data you will find at technical data Three integrated technologies for all-round healthy batteries variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. preventing damage from excessive gassing: the BatterySafe mode To shorten the charging time, the highest possible charging current has been selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure). Less maintenance and aging when the battery is at rest: the storage mode The storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the charge retention voltage is then lowered to 2.2 v/cell (13.2 v for a 12-v battery) to minimize gas generation and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Also perfect for LiFePO4 battery The Phoenix Smart Charger 24/25(3) ip43 can have on/off control attached by connecting a relay or optocoupler open collector output from a Li-Ion bms to the remote on/off port. Alternatively, voltage and current can be fully controlled via bluetooth. vE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 24/25(3) ip43 from victron is ideally suited for a wired data connection with a color control panel, pc or other devices thanks to the vE.Direct port. Also note the victronConnect app for Android and iOS, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the vE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events. Required accessories Please note that an ac connection cable is required to connect the Phoenix Smart Charger 24/25(3) ip43 to the mains. This is not included in the scope of delivery. Scope of delivery 1x psc242553085 victron Phoenix Smart Charger 24/25(3) ip43 1x ac cable clamp 1x user manual
Soon available again