MPP Solar Charge Controller
- Batteries
- Electronics
- Generators
- Installation
- Complete Systems
- Brands
Filter
–
MPP Solar Charge Controller
2 Results
Sorting
VAT-exempt delivery possible*
1-15-017330
Votronic 1717 MPP 260 CI Solar-Laderegler
Der MPP 260 CI Solar-Laderegler von Votronic (MPN 1717) ist eine hochmoderne Lösung für die effiziente Ladung deiner Batterien mit Solarenergie. Dieses innovative Ladegerät wurde speziell für den Einsatz in Wohnmobilen, Booten und anderen Fahrzeugen entwickelt, um sicherzustellen, dass du stets über ausreichend Energie verfügst. Mit einer maximalen Ladeleistung von 260 Watt und der bewährten Maximum Power Point Tracking (MPP) Technologie maximiert der Laderegler die Ausbeute deiner Solaranlage, indem er automatisch den optimalen Arbeitspunkt für die Solarzellen ermittelt. Dies gewährleistet eine effiziente Umwandlung von Sonnenenergie in elektrische Leistung und optimiert somit die Ladeeffizienz.
Über den MPP 260 CI Solar-Laderegler
3 Ladeprogramme für Blei-Säure/Gel/AGM
5 Ladeprogramme mit Temperatur-Schutz für aktuelle LiFePO4
Rückstromsperre (Nachtbetrieb)
Bordnetzfilter für Parallelbetrieb mit anderen Ladequellen
Automatischer Ausgleich der Spannungsverluste auf den Ladekabeln
Blei-Temperatur-Kompensation/LiFePO4-Schutz
Anschluss Solar-Computer S, VPC, Bluetooth Connector, steckfertig
Zwei Batterie-Ladeausgänge
Der Votronic 1717 MPP 260 CI Solar-Laderegler verfügt über zwei Batterie-Ladeausgänge, die automatisches Laden der Hauptversorgungs-Batterie (12V) ermöglichen, sowie Stützladung und Ladeerhaltung (max. 1 A) für die Fahrzeug-Starterbatterie (Start) mit eingebautem Überladeschutz.
IU1oU2-Ladekennlinie
Die "IU1oU2"-Ladekennlinie des Votronic MPP 260 CI Solar-Ladereglers gewährleistet durch eine definierte Ladespannungserhöhung (U1) die Verhinderung schädlicher Säureschichtungen in Bleibatterien und sorgt für eine Ausgleichsladung der einzelnen Batteriezellen (Blei und Lithium), gefolgt von einer automatischen Erhaltungsladung (U2)
Schaltausgang "AES"
Der Schaltausgang "AES" ermöglicht bei anhaltendem Solar-Leistungsüberschuss das automatische Umschalten von Kühlschränken mit "AES" (Automatic Energy Selector, Electrolux/Dometic) von Gas- auf 12 V-Betrieb.
Umfangreicher elektronischer Schutz
Überlastschutz
Übertemperatur-Schutz
Kurzschluss-Schutz
Ladestrombegrenzung
Technische Daten
Batterie-Nennspannung Blei: 12V
Batterie-Nennspannung LiFePO4: 12,0 - 13,3V
Solar-Modul-Spannung (Voc) max: 60V
Solar-Modul-Strom max: 0-15A
Solar-Modul-Leistung (Pmax): 40 - 260Wp
Empf. Batterie-Mindest-Kapazität Blei: > 60Ah
Empf. Batterie-Mindest-Kapazität LiFePO: > 45Ah
Ladestrom Aufbaubatterie max.: 0 - 18,5A
Ladestrom Starter-Batterie max.: 0-1,0A
Schalt-Ausgang AES-Kühlschrank: 12V / 0,2A
Umgebungstemperatur: -20 bis +45 °C
Abmessungen: 131 x 77 x 40mm
Gewicht: 235g
Lieferumfang
1x Votronic MPP 1717 260 CI Solar-Laderegler
Der MPP 260 CI Solar-Laderegler von Votronic (MPN 1717) ist eine hochmoderne Lösung für die effiziente Ladung deiner Batterien mit Sola...
Shipped in 1-3 days
Shipped in 1-3 days
1-15-017330
Votronic 1717 MPP 260 CI Solar-Laderegler
VAT-exempt delivery possible*
Der MPP 260 CI Solar-Laderegler von Votronic (MPN 1717) ist eine hochmoderne Lösung für die effiziente Ladung deiner Batterien mit Solarenergie. Dieses innovative Ladegerät wurde speziell für den Einsatz in Wohnmobilen, Booten und anderen Fahrzeugen entwickelt, um sicherzustellen, dass du stets über ausreichend Energie verfügst. Mit einer maximalen Ladeleistung von 260 Watt und der bewährten Maximum Power Point Tracking (MPP) Technologie maximiert der Laderegler die Ausbeute deiner Solaranlage, indem er automatisch den optimalen Arbeitspunkt für die Solarzellen ermittelt. Dies gewährleistet eine effiziente Umwandlung von Sonnenenergie in elektrische Leistung und optimiert somit die Ladeeffizienz.
Über den MPP 260 CI Solar-Laderegler
3 Ladeprogramme für Blei-Säure/Gel/AGM
5 Ladeprogramme mit Temperatur-Schutz für aktuelle LiFePO4
Rückstromsperre (Nachtbetrieb)
Bordnetzfilter für Parallelbetrieb mit anderen Ladequellen
Automatischer Ausgleich der Spannungsverluste auf den Ladekabeln
Blei-Temperatur-Kompensation/LiFePO4-Schutz
Anschluss Solar-Computer S, VPC, Bluetooth Connector, steckfertig
Zwei Batterie-Ladeausgänge
Der Votronic 1717 MPP 260 CI Solar-Laderegler verfügt über zwei Batterie-Ladeausgänge, die automatisches Laden der Hauptversorgungs-Batterie (12V) ermöglichen, sowie Stützladung und Ladeerhaltung (max. 1 A) für die Fahrzeug-Starterbatterie (Start) mit eingebautem Überladeschutz.
IU1oU2-Ladekennlinie
Die "IU1oU2"-Ladekennlinie des Votronic MPP 260 CI Solar-Ladereglers gewährleistet durch eine definierte Ladespannungserhöhung (U1) die Verhinderung schädlicher Säureschichtungen in Bleibatterien und sorgt für eine Ausgleichsladung der einzelnen Batteriezellen (Blei und Lithium), gefolgt von einer automatischen Erhaltungsladung (U2)
Schaltausgang "AES"
Der Schaltausgang "AES" ermöglicht bei anhaltendem Solar-Leistungsüberschuss das automatische Umschalten von Kühlschränken mit "AES" (Automatic Energy Selector, Electrolux/Dometic) von Gas- auf 12 V-Betrieb.
Umfangreicher elektronischer Schutz
Überlastschutz
Übertemperatur-Schutz
Kurzschluss-Schutz
Ladestrombegrenzung
Technische Daten
Batterie-Nennspannung Blei: 12V
Batterie-Nennspannung LiFePO4: 12,0 - 13,3V
Solar-Modul-Spannung (Voc) max: 60V
Solar-Modul-Strom max: 0-15A
Solar-Modul-Leistung (Pmax): 40 - 260Wp
Empf. Batterie-Mindest-Kapazität Blei: > 60Ah
Empf. Batterie-Mindest-Kapazität LiFePO: > 45Ah
Ladestrom Aufbaubatterie max.: 0 - 18,5A
Ladestrom Starter-Batterie max.: 0-1,0A
Schalt-Ausgang AES-Kühlschrank: 12V / 0,2A
Umgebungstemperatur: -20 bis +45 °C
Abmessungen: 131 x 77 x 40mm
Gewicht: 235g
Lieferumfang
1x Votronic MPP 1717 260 CI Solar-Laderegler
Shipped in 1-3 days
VAT-exempt delivery possible*
18,69 %
1-15-002860
Votronic MPP 165 Duo Digital 10A 12V MPPT Solar Charge Controller
MPP solar charge controller for high-quality caravans and boats.
For solar modules with:
- up to 165 Wp module performance- max. 10A module current- max. 50V module voltage
Charging options: 1 supply and 1 starter battery
Controllers according to the MPP technology are continuously and automatically calculating the maximum power yield (MPP) of the solar modules several times per minute. The voltage surplus of the solar module will be transformed to a higher charging current for the battery (realised by high-frequency switching controller technology with high efficiency). This surplus of charging current ensures short charging times and the best possible power yield of the solar system.
Main Charging Port I: Automatic charging and conservation of charge of the (main) board supply batteryAuxiliary Charging Port II: Current and voltage reduced for recharging as well as trickle charge of the vehicle’s starter battery, thus ensuring continuous starting capacityContinuous control, full batteries by immediate recharging in case of current consumptionAutomatic charging programs adjustable for gel, acid/lead-acid, AGM/fleece and Lithium batteries for optimum charging resultsVery low own electricity consumption, high efficiencyConnection for Battery Temperature Sensor for temperature compensationIndicators for operating state "Full", "> 80%", "Charging", "MPP" and "Low Voltage"Control output EBL, prepared for “Elektroblock” with solar current display, cable set, Art. 2007, required
MPP solar charge controller for high-quality caravans and boats.
For solar modules with:
- up to 165 Wp module performance- max. 10A module current-...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
18,69 %
MPP solar charge controller for high-quality caravans and boats.
For solar modules with:
- up to 165 Wp module performance- max. 10A module current- max. 50V module voltage
Charging options: 1 supply and 1 starter battery
Controllers according to the MPP technology are continuously and automatically calculating the maximum power yield (MPP) of the solar modules several times per minute. The voltage surplus of the solar module will be transformed to a higher charging current for the battery (realised by high-frequency switching controller technology with high efficiency). This surplus of charging current ensures short charging times and the best possible power yield of the solar system.
Main Charging Port I: Automatic charging and conservation of charge of the (main) board supply batteryAuxiliary Charging Port II: Current and voltage reduced for recharging as well as trickle charge of the vehicle’s starter battery, thus ensuring continuous starting capacityContinuous control, full batteries by immediate recharging in case of current consumptionAutomatic charging programs adjustable for gel, acid/lead-acid, AGM/fleece and Lithium batteries for optimum charging resultsVery low own electricity consumption, high efficiencyConnection for Battery Temperature Sensor for temperature compensationIndicators for operating state "Full", "> 80%", "Charging", "MPP" and "Low Voltage"Control output EBL, prepared for “Elektroblock” with solar current display, cable set, Art. 2007, required
Shipped in 1-3 days
MPP Solar Charge Controller
Votronic MPP solar charge controllers have two battery outputs and a very fast MPPT with which you can get the highest possible yield from your solar system. Thanks to the EBL connection, the device can optionally be connected to the electrical block of your motorhome. The Votronic solar controllers are suitable for use in motorhomes as well as boats and yachts, as a marine version of each model is also available.