Offgridtec® Solar-Direct 1800W HMS-1600-4T Solar System Full Black - 5 m Connection Cable – Balcony Railing Mounting Kit

The Offgridtec Solar-Direct solar system (MPN: 014535) combines four Luxen bifacial full-black glass-glass modules with a total output of 1,800 Wp and the Hoymiles HMS-1600-4T microinverter with 1,600 VA output power. Four independent MPP trackers allow for separate control of the connected solar modules. The set is available with different AC connection cable lengths and mounting systems, as well as without a mounting bracket. The exact scope of delivery depends on the selected variant. The grid connection must be performed by a licensed electrician.

Key Benefits

• 1,800 Wp total power from 4 × 450-Wp solar modules
• Bifacial N-type TOPCon glass-glass modules in Full Black
• Hoymiles HMS-1600-4T with 1,600 VA rated output power
• 4 independent MPP trackers for separate control of the modules
• AC connection cables included in the selected length
• Depending on the variant, comes with a matching mounting system or without a mounting bracket

The complete solar system includes:

• 4x Luxen Solar 450W Luxneri Series N5 Full Black bifacial solar modules
• 1x Hoymiles HMS-1600-4T microinverter
• 1x Hoymiles HMS connection cable, 3x1.5mm², for professional AC connection (selectable lengths: 5m – 10m – 15m)
• 4x 3m 6mm² MC-4 connector extension cables (plug/socket)
• Optional: Mounting kit for balcony railings – flat roof – plain tile roof – tiled roof – corrugated fiber cement and sheet metal roof

How does the solar system work?

The four solar modules generate direct current, which the Hoymiles microinverter converts into grid-compliant alternating current and feeds into the single-phase home electrical system. Each solar module is connected to a separate input on the inverter. Thanks to the four separate MPP trackers, the modules are controlled independently of one another, so that different orientations or temporary shading of individual modules have less of an impact on the remaining modules.

Luxen Solar 450W Luxneri Series N5 Full Black Bifacial

The Luxen LNDX-450ND combines N-type TOPCon cells with a bifacial glass-on-glass design. In addition to the front side, the rear side of the module can also use incident light to generate electricity. The potential additional yield depends on the mounting height, surface, orientation, and lighting conditions at the installation site. The Full Black design ensures a uniform appearance.

Technical Specifications of the Solar Module

• Rated power: 450 Wp
• Cell technology: N-type monocrystalline, TOPCon
• Cell configuration: 96 half-cells
• Design: bifacial, glass-glass, Full Black
• Module efficiency: 22.52%
• Voltage at MPP: 30.08 V
• Current at MPP: 14.96 A
• Open-circuit voltage: 35.21 V
• Short-circuit current: 16.02 A
• Connectors: MC4-compatible
• Dimensions: 1,762 × 1,134 × 30 mm
• Weight: 24 kg
• Operating temperature: −40 to +85 °C

Hoymiles HMS-1600-4T Microinverter

The Hoymiles HMS-1600-4T offers four solar module inputs, each with its own MPP tracker, and provides up to 1,600 VA of output power. The IP67-rated enclosure and fanless passive cooling allow for protected installation beneath the solar modules.

The inverter can be connected to a compatible Hoymiles DTU via the Sub-1G wireless interface. This allows operating data to be transmitted to the S-Miles Cloud and analyzed at the module level. A DTU is included only if it is explicitly listed as part of the package for the selected model.

Technical Specifications of the Microinverter

• Rated output power: 1,600 VA
• Rated output current: 6.96 A at 230 V
• Rated output voltage: 230 V
• MPPT voltage range: 16–60 V
• Start-up voltage: 22 V
• Maximum input voltage: 65 V
• Maximum input current: 4 × 14 A
• Maximum input short-circuit current: 4 × 25 A
• Number of MPP trackers: 4
• Inputs per MPP tracker: 1
• CEC peak efficiency: 96.7%
• MPPT nominal efficiency: 99.8%
• Communication: Sub-1G
• Cooling: natural convection, fanless
• Protection rating: IP67
• Dimensions: 331 × 218 × 40.6 mm
• Weight: 5.56 kg
• Ambient temperature: −40 to +65 °C

Selectable mounting systems

Depending on the variant, the Solar-Direct solar system is available with a mounting kit for balcony railings, flat roofs, plain-tile roofs, tiled roofs, as well as corrugated fiber-cement and sheet metal roofs, or without a mounting bracket. The selected product variant determines the configuration. The suitability of the mounting system for the specific installation site, as well as the structural requirements—including wind and snow loads—must be verified prior to installation.

Connecting the Solar System

The Solar-Direct solar system has a nominal PV power output of 1,800 Wp and a nominal inverter output of 1,600 VA. Due to this power rating, the system is not intended for independent commissioning by end customers via a standard household outlet.

Important Installation Note: Connection to the home electrical system and commissioning must be performed by a qualified electrician in accordance with the applicable technical connection requirements and electrical regulations. The electrician must inspect the existing electrical installation and provide a suitable, standards-compliant connection solution.

The included AC connection cable is intended for the proper integration of the inverter. The cable length depends on the selected product variant.

Technical Specifications of the Complete System

• PV rated power: 1,800 Wp
• Number of solar modules: 4
• Inverter rated output power: 1,600 VA
• Grid system: single-phase
• System type: Grid-connected PV system for feeding into the home electrical grid
• Storage: not included
• AC connection cable: as per selected variant, for proper grid connection
• Mounting system: as per selected model or without mounting bracket
• Grid connection and commissioning: by a licensed electrician