MPPT-Technologie
MPPT (Maximum Power Point Tracking) kann dabei helfen den Ertrag zu maximieren, indem der Laderegler bei wechselhaften Bedingungen, aus der Leistungskurve der Solarmodule immer das Maximum herausholt, wobei ein PWM die Ladung unterbrechen würde.
Dadurch kann ein MPPT bis zu 30% mehr Ertrag erzielen, als ein PWM-Laderegler und besonders im Campingbereich unverzichtbar, sofern man den meisten Ertrag erzielen möchte.
MPPT Laderegler
VAT-exempt delivery possible*
1-01-017370
Offgridtec MPPT PRO-X 10A Laderegler 12V/24V
Der MPPT PRO-X Solarladeregler 10A (MPN: 017370) von Offgridtec setzt neue Maßstäbe für deine Solarversorgung. Der Regler der neuesten Generation von Offgridtec überzeugt durch hohe Effizienz und Flexibilität, sowie zuverlässige Leistung, vereint mit umfassendem Schutz und einfachen Überwachungsmöglichkeiten. Die fortschrittliche MPPT-Technologie und ultra-schnelle Tracking-Geschwindigkeiten gewähren eine beeindruckende Mindesteffizienz von 99,5% für maximale Erträge. Somit eignet sich der innovative High-End Solarregler hervorragend zur Anwendung für Haushaltssysteme, Feldüberwachung, USV, Notstromversorgung, Telekommunikation oder Beleuchtung, sowie auch für den Einsatz in Wohnmobilen oder auf Booten.
Highlights des MPPT PRO-X 10A
Hochentwickelte MPPT-Technologie mit 99,5 % Mindesteffizienz
Max. DC/DC Übertragungseffizienz von bis zu 98,2%, Volllasteffizienz bis zu 96,2%
Fortschrittlicher MPPT-Regelalgorithmus zur Minimierung der MPP-Verlustrate und -Verlustzeit
Präzise Erfassung und Verfolgung des Multiple Peaks Maximum Power Point
Max. 10A Ladestrom, geeignet für 12V und 24V Systeme
Unterstützt Blei-Säure- sowie moderne Lithium-Ionen-Batterien
Alternativ auch mit 20A, 30A und 40A Ladestrom erhältlich
Batterietemperatur-Kompensationsfunktion
Automatische Begrenzung von Ladeleistung und Ladestrom
Echtzeit-Energie-Statistik-Funktion
Volllastbetrieb ohne Kapazitätsverringerung im Betriebstemperaturbereich
Überhitzungsschutzfunktion, Mehrfachlastmodus und umfangreicher Elektronikschutz
RS-485-Kommunikations-Bus-Schnittstelle mit 5VDC-Stromversorgung und professionellem Schutz-Chip inkl. Modbus- Kommunikationsprotokoll, Überstrom- und Kurzschlusssicherung
Schutzart IP33
Integriertes LCD-Display
Zuverlässig, flexibel und sicher
Der Offgridtec MPPT PRO-X Solarladeregler ist ein vielseitig einsetzbares Kraftpaket. Er ist kompatibel mit Blei-Säure- und Lithium-Ionen-Batterien und ermöglicht die lokale Anpassung der Spannungsparameter für BCV, FCV, LVD und LVR. Die Begrenzungsfunktion der Ladeleistung und des Ladestroms sowie die automatische Absenkung der Ladeleistung sorgen für Stabilität, selbst bei überdimensionierten PV-Modulen oder hohen Temperaturen. Zusätzlich gewährleistet er im Volllastbetrieb innerhalb des Betriebstemperaturbereichs eine stabile Leistung ohne Kapazitätsverlust. Der IP33-Schutzstandard und das isolierte RS485-Design verbessern die Zuverlässigkeit und Sicherheit des Reglers. Der Mehrfachlastmodus sowie umfangreiche Elektronik- und Überhitzungsschutzfunktionen bieten Schutz vor Schäden an Solarregler und angeschlossenen Geräten.
Hochwertig und fortschrittlich
Der Solarladeregler der PRO-X Serie ist mit hochwertigen ST- und IR-Komponenten renommierter Marken ausgestattet, was eine lange Lebensdauer und hohe Zuverlässigkeit garantiert. Der auf einem digitalen Regelkreis basierende 3-Stufen-Lademodus verlängert die Batterielebensdauer effektiv, erhöht die Systemleistung deutlich und bietet umfassenden Schutz vor System- oder Installationsfehlern, die Schäden an Komponenten verursachen könnten. Dies führt zu erhöhter Betriebssicherheit und einer längeren Lebensdauer des gesamten Solarstromversorgungssystems. Zusätzlich ermöglicht die intuitive Steuerung über PC-Software oder mobile Apps eine einfache Fernüberwachung und -steuerung des Systems.
Ultraschnelles Maximum Power Point Tracking
Besonders unter wechselnden Lichtverhältnissen, wie bei bedecktem Himmel, steigert ein extrem schneller MPPT-Regler den Energieertrag erheblich und sichert eine Mindesteffizienz von 99,5%. Mit dem optimierten MPPT-Regelalgorithmus minimieren die Offgridtec-Controller aus der PRO-X Serie die MPP-Verlustrate sowie die MPP-Verlustzeit und verfolgen den maximalen Leistungspunkt (Multiple Peaks Maximum Power Point) des PV-Systems präzise. Dies garantiert die optimale Nutzung der Solarenergie unter allen Bedingungen und steigert das Energienutzungsverhältnis im Vergleich zur PWM-Lademethode um 10-30 %.
Technische Daten
System Nennspannung: 12/24VDC Auto
Nennladestrom: 10A
Nennentladestrom: 10A
Batteriespannung: 8 ~32V
max. PV-Leerlaufspannung: 100V/92V
MPP-Spannungsbereich: ~72V / Batteriespannung +2V
Nennladeleistung: 130W/12V 260W/24V
max. Umwandlungswirkungsgrad: 98,2%
Volllast-Wirkungsgrad: 96,2%
Eigenverbrauch: ≤30mA(12V) ≤16mA(24V)
Spannungabfall im Entladekreis: ≤0.23V
RS485 Schnittstelle: 5VDC/200mA (RJ45)
Temperaturkompensationskoeffizient: -3mV/℃/2V
Erdung: übliche Minus-Erdung
Anschluss: 12AWG(4mm²) empf. Kabel: 12AWG(4mm²)
Abmessungen: 175×143×48 mm
Gewicht: 0,57 kg
Lieferumfang:
1× Offgridtec 1-01-017370 MPPT PRO-X 10A
1× Bedienungsanleitung
Der MPPT PRO-X Solarladeregler 10A (MPN: 017370) von Offgridtec setzt neue Maßstäbe für deine Solarversorgung. Der Regler de...
Soon available again
Soon available again
VAT-exempt delivery possible*
1-01-017375
Offgridtec MPPT PRO-X 20A Laderegler 12V/24V
Der MPPT PRO-X Solarladeregler 20A (MPN: 017375) von Offgridtec setzt neue Maßstäbe für deine Solarversorgung. Der Regler der neuesten Generation von Offgridtec überzeugt durch hohe Effizienz und Flexibilität, sowie zuverlässige Leistung, vereint mit umfassendem Schutz und einfachen Überwachungsmöglichkeiten. Die fortschrittliche MPPT-Technologie und ultra-schnelle Tracking-Geschwindigkeiten gewähren eine beeindruckende Mindesteffizienz von 99,5% für maximale Erträge. Somit eignet sich der innovative High-End Solarregler hervorragend zur Anwendung für Haushaltssysteme, Feldüberwachung, USV, Notstromversorgung, Telekommunikation oder Beleuchtung, sowie auch für den Einsatz in Wohnmobilen oder auf Booten.
Highlights des MPPT PRO-X 20A
Hochentwickelte MPPT-Technologie mit 99,5 % Mindesteffizienz
Max. DC/DC Übertragungseffizienz von bis zu 98,2%, Volllasteffizienz bis zu 96,2%
Fortschrittlicher MPPT-Regelalgorithmus zur Minimierung der MPP-Verlustrate und -Verlustzeit
Präzise Erfassung und Verfolgung des Multiple Peaks Maximum Power Point
Max. 20A Ladestrom, geeignet für 12V und 24V Systeme
Unterstützt Blei-Säure- sowie moderne Lithium-Ionen-Batterien
Alternativ auch mit 10A, 30A und 40A Ladestrom erhältlich
Batterietemperatur-Kompensationsfunktion
Automatische Begrenzung von Ladeleistung und Ladestrom
Echtzeit-Energie-Statistik-Funktion
Volllastbetrieb ohne Kapazitätsverringerung im Betriebstemperaturbereich
Überhitzungsschutzfunktion, Mehrfachlastmodus und umfangreicher Elektronikschutz
RS-485-Kommunikations-Bus-Schnittstelle mit 5VDC-Stromversorgung und professionellem Schutz-Chip inkl. Modbus- Kommunikationsprotokoll, Überstrom- und Kurzschlusssicherung
Schutzart IP33
Integriertes LCD-Display
Zuverlässig, flexibel und sicher
Der Offgridtec MPPT PRO-X Solarladeregler ist ein vielseitig einsetzbares Kraftpaket. Er ist kompatibel mit Blei-Säure- und Lithium-Ionen-Batterien und ermöglicht die lokale Anpassung der Spannungsparameter für BCV, FCV, LVD und LVR. Die Begrenzungsfunktion der Ladeleistung und des Ladestroms sowie die automatische Absenkung der Ladeleistung sorgen für Stabilität, selbst bei überdimensionierten PV-Modulen oder hohen Temperaturen. Zusätzlich gewährleistet er im Volllastbetrieb innerhalb des Betriebstemperaturbereichs eine stabile Leistung ohne Kapazitätsverlust. Der IP33-Schutzstandard und das isolierte RS485-Design verbessern die Zuverlässigkeit und Sicherheit des Reglers. Der Mehrfachlastmodus sowie umfangreiche Elektronik- und Überhitzungsschutzfunktionen bieten Schutz vor Schäden an Solarregler und angeschlossenen Geräten.
Hochwertig und fortschrittlich
Der Solarladeregler der PRO-X Serie ist mit hochwertigen ST- und IR-Komponenten renommierter Marken ausgestattet, was eine lange Lebensdauer und hohe Zuverlässigkeit garantiert. Der auf einem digitalen Regelkreis basierende 3-Stufen-Lademodus verlängert die Batterielebensdauer effektiv, erhöht die Systemleistung deutlich und bietet umfassenden Schutz vor System- oder Installationsfehlern, die Schäden an Komponenten verursachen könnten. Dies führt zu erhöhter Betriebssicherheit und einer längeren Lebensdauer des gesamten Solarstromversorgungssystems. Zusätzlich ermöglicht die intuitive Steuerung über PC-Software oder mobile Apps eine einfache Fernüberwachung und -steuerung des Systems.
Ultraschnelles Maximum Power Point Tracking
Besonders unter wechselnden Lichtverhältnissen, wie bei bedecktem Himmel, steigert ein extrem schneller MPPT-Regler den Energieertrag erheblich und sichert eine Mindesteffizienz von 99,5%. Mit dem optimierten MPPT-Regelalgorithmus minimieren die Offgridtec-Controller aus der PRO-X Serie die MPP-Verlustrate sowie die MPP-Verlustzeit und verfolgen den maximalen Leistungspunkt (Multiple Peaks Maximum Power Point) des PV-Systems präzise. Dies garantiert die optimale Nutzung der Solarenergie unter allen Bedingungen und steigert das Energienutzungsverhältnis im Vergleich zur PWM-Lademethode um 10-30 %.
Technische Daten
System Nennspannung: 12/24VDC Auto
Nennladestrom: 20A
Nennentladestrom: 20A
Batteriespannung: 8 ~32V
max. PV-Leerlaufspannung: 100V/92V
MPP-Spannungsbereich: ~72V / Batteriespannung +2V
Nennladeleistung: 260W/12V 520W/24V
max. Umwandlungswirkungsgrad: 98,3%
Volllast-Wirkungsgrad: 96,4%
Eigenverbrauch: ≤30mA(12V) ≤16mA(24V)
Spannungabfall im Entladekreis: ≤0.23V
RS485 Schnittstelle: 5VDC/200mA (RJ45)
Temperaturkompensationskoeffizient: -3mV/℃/2V
Erdung: übliche Minus-Erdung
Anschluss: 6AWG(16mm²) empf. Kabel: 10AWG(6mm²)
Abmessungen: 217×158×56,5 mm
Gewicht: 0,96 kg
Lieferumfang:
1× Offgridtec 1-01-017375 MPPT PRO-X 20A
1× Bedienungsanleitung
Der MPPT PRO-X Solarladeregler 20A (MPN: 017375) von Offgridtec setzt neue Maßstäbe für deine Solarversorgung. Der Regler de...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
1-01-017380
Offgridtec MPPT PRO-X 30A Laderegler 12V/24V/36V/48V
Der MPPT PRO-X Solarladeregler 30A (MPN: 017380) von Offgridtec setzt neue Maßstäbe für deine Solarversorgung. Der Regler der neuesten Generation von Offgridtec überzeugt durch hohe Effizienz und Flexibilität, sowie zuverlässige Leistung, vereint mit umfassendem Schutz und einfachen Überwachungsmöglichkeiten. Die fortschrittliche MPPT-Technologie und ultra-schnelle Tracking-Geschwindigkeiten gewähren eine beeindruckende Mindesteffizienz von 99,5% für maximale Erträge. Somit eignet sich der innovative High-End Solarregler hervorragend zur Anwendung für Haushaltssysteme, Feldüberwachung, USV, Notstromversorgung, Telekommunikation oder Beleuchtung, sowie auch für den Einsatz in Wohnmobilen oder auf Booten.
Highlights des MPPT PRO-X 30A
Hochentwickelte MPPT-Technologie mit 99,5 % Mindesteffizienz
Max. DC/DC Übertragungseffizienz von bis zu 98,1%, Volllasteffizienz bis zu 96,9%
Fortschrittlicher MPPT-Regelalgorithmus zur Minimierung der MPP-Verlustrate und -Verlustzeit
Präzise Erfassung und Verfolgung des Multiple Peaks Maximum Power Point
Max. 30A Ladestrom, geeignet für 12V,24V 36V und 48V Systeme
Unterstützt Blei-Säure- sowie moderne Lithium-Ionen-Batterien
Alternativ auch mit 10A, 20A und 40A Ladestrom erhältlich
Batterietemperatur-Kompensationsfunktion
Automatische Begrenzung von Ladeleistung und Ladestrom
Echtzeit-Energie-Statistik-Funktion
Volllastbetrieb ohne Kapazitätsverringerung im Betriebstemperaturbereich
Überhitzungsschutzfunktion, Mehrfachlastmodus und umfangreicher Elektronikschutz
RS-485-Kommunikations-Bus-Schnittstelle mit 5VDC-Stromversorgung und professionellem Schutz-Chip inkl. Modbus- Kommunikationsprotokoll, Überstrom- und Kurzschlusssicherung
Schutzart IP33
Integriertes LCD-Display
Zuverlässig, flexibel und sicher
Der Offgridtec MPPT PRO-X Solarladeregler ist ein vielseitig einsetzbares Kraftpaket. Er ist kompatibel mit Blei-Säure- und Lithium-Ionen-Batterien und ermöglicht die lokale Anpassung der Spannungsparameter für BCV, FCV, LVD und LVR. Die Begrenzungsfunktion der Ladeleistung und des Ladestroms sowie die automatische Absenkung der Ladeleistung sorgen für Stabilität, selbst bei überdimensionierten PV-Modulen oder hohen Temperaturen. Zusätzlich gewährleistet er im Volllastbetrieb innerhalb des Betriebstemperaturbereichs eine stabile Leistung ohne Kapazitätsverlust. Der IP33-Schutzstandard und das isolierte RS485-Design verbessern die Zuverlässigkeit und Sicherheit des Reglers. Der Mehrfachlastmodus sowie umfangreiche Elektronik- und Überhitzungsschutzfunktionen bieten Schutz vor Schäden an Solarregler und angeschlossenen Geräten.
Hochwertig und fortschrittlich
Der Solarladeregler der PRO-X Serie ist mit hochwertigen ST- und IR-Komponenten renommierter Marken ausgestattet, was eine lange Lebensdauer und hohe Zuverlässigkeit garantiert. Der auf einem digitalen Regelkreis basierende 3-Stufen-Lademodus verlängert die Batterielebensdauer effektiv, erhöht die Systemleistung deutlich und bietet umfassenden Schutz vor System- oder Installationsfehlern, die Schäden an Komponenten verursachen könnten. Dies führt zu erhöhter Betriebssicherheit und einer längeren Lebensdauer des gesamten Solarstromversorgungssystems. Zusätzlich ermöglicht die intuitive Steuerung über PC-Software oder mobile Apps eine einfache Fernüberwachung und -steuerung des Systems.
Ultraschnelles Maximum Power Point Tracking
Besonders unter wechselnden Lichtverhältnissen, wie bei bedecktem Himmel, steigert ein extrem schneller MPPT-Regler den Energieertrag erheblich und sichert eine Mindesteffizienz von 99,5%. Mit dem optimierten MPPT-Regelalgorithmus minimieren die Offgridtec-Controller aus der PRO-X Serie die MPP-Verlustrate sowie die MPP-Verlustzeit und verfolgen den maximalen Leistungspunkt (Multiple Peaks Maximum Power Point) des PV-Systems präzise. Dies garantiert die optimale Nutzung der Solarenergie unter allen Bedingungen und steigert das Energienutzungsverhältnis im Vergleich zur PWM-Lademethode um 10-30 %.
Technische Daten
System Nennspannung: 12/24/36/48VDC Auto
Nennladestrom: 30A
Nennentladestrom: 30A
Batteriespannung: 8 ~68V
max. PV-Leerlaufspannung: 150V/138V
MPP-Spannungsbereich: ~108V / Batteriespannung +2V
Nennladeleistung: 390W/12V 780W/24V 1170W/36V 1560W/48V
max. Umwandlungswirkungsgrad: 98,1%
Volllast-Wirkungsgrad: 96,9%
Eigenverbrauch: ≤30mA(12V) ≤16mA(24V) ≤13mA(36-48V)
Spannungabfall im Entladekreis: ≤0.23V
RS485 Schnittstelle: 5VDC/200mA (RJ45)
Temperaturkompensationskoeffizient: -3mV/℃/2V
Erdung: übliche Minus-Erdung
Anschluss: 6AWG(16mm²) empf. Kabel: 8AWG(10mm²)
Abmessungen: 255×187×75,5 mm
Gewicht: 2,07 kg
Lieferumfang:
1× Offgridtec 1-01-017380 MPPT PRO-X 30A
1× Bedienungsanleitung
Der MPPT PRO-X Solarladeregler 30A (MPN: 017380) von Offgridtec setzt neue Maßstäbe für deine Solarversorgung. Der Regler de...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
1-01-017385
Offgridtec MPPT PRO-X 40A Laderegler 12V/24V/36V/48V
Der MPPT PRO-X Solarladeregler 40A (MPN: 017385) von Offgridtec setzt neue Maßstäbe für deine Solarversorgung. Der Regler der neuesten Generation von Offgridtec überzeugt durch hohe Effizienz und Flexibilität, sowie zuverlässige Leistung, vereint mit umfassendem Schutz und einfachen Überwachungsmöglichkeiten. Die fortschrittliche MPPT-Technologie und ultra-schnelle Tracking-Geschwindigkeiten gewähren eine beeindruckende Mindesteffizienz von 99,5% für maximale Erträge. Somit eignet sich der innovative High-End Solarregler hervorragend zur Anwendung für Haushaltssysteme, Feldüberwachung, USV, Notstromversorgung, Telekommunikation oder Beleuchtung, sowie auch für den Einsatz in Wohnmobilen oder auf Booten.
Highlights des MPPT PRO-X 40A
Hochentwickelte MPPT-Technologie mit 99,5 % Mindesteffizienz
Max. DC/DC Übertragungseffizienz von bis zu 98,5%, Volllasteffizienz bis zu 97,2%
Fortschrittlicher MPPT-Regelalgorithmus zur Minimierung der MPP-Verlustrate und -Verlustzeit
Präzise Erfassung und Verfolgung des Multiple Peaks Maximum Power Point
Max. 30A Ladestrom, geeignet für 12V,24V 36V und 48V Systeme
Unterstützt Blei-Säure- sowie moderne Lithium-Ionen-Batterien
Alternativ auch mit 10A, 20A und 30A Ladestrom erhältlich
Batterietemperatur-Kompensationsfunktion
Automatische Begrenzung von Ladeleistung und Ladestrom
Echtzeit-Energie-Statistik-Funktion
Volllastbetrieb ohne Kapazitätsverringerung im Betriebstemperaturbereich
Überhitzungsschutzfunktion, Mehrfachlastmodus und umfangreicher Elektronikschutz
RS-485-Kommunikations-Bus-Schnittstelle mit 5VDC-Stromversorgung und professionellem Schutz-Chip inkl. Modbus- Kommunikationsprotokoll, Überstrom- und Kurzschlusssicherung
Schutzart IP33
Integriertes LCD-Display
Zuverlässig, flexibel und sicher
Der Offgridtec MPPT PRO-X Solarladeregler ist ein vielseitig einsetzbares Kraftpaket. Er ist kompatibel mit Blei-Säure- und Lithium-Ionen-Batterien und ermöglicht die lokale Anpassung der Spannungsparameter für BCV, FCV, LVD und LVR. Die Begrenzungsfunktion der Ladeleistung und des Ladestroms sowie die automatische Absenkung der Ladeleistung sorgen für Stabilität, selbst bei überdimensionierten PV-Modulen oder hohen Temperaturen. Zusätzlich gewährleistet er im Volllastbetrieb innerhalb des Betriebstemperaturbereichs eine stabile Leistung ohne Kapazitätsverlust. Der IP33-Schutzstandard und das isolierte RS485-Design verbessern die Zuverlässigkeit und Sicherheit des Reglers. Der Mehrfachlastmodus sowie umfangreiche Elektronik- und Überhitzungsschutzfunktionen bieten Schutz vor Schäden an Solarregler und angeschlossenen Geräten.
Hochwertig und fortschrittlich
Der Solarladeregler der PRO-X Serie ist mit hochwertigen ST- und IR-Komponenten renommierter Marken ausgestattet, was eine lange Lebensdauer und hohe Zuverlässigkeit garantiert. Der auf einem digitalen Regelkreis basierende 3-Stufen-Lademodus verlängert die Batterielebensdauer effektiv, erhöht die Systemleistung deutlich und bietet umfassenden Schutz vor System- oder Installationsfehlern, die Schäden an Komponenten verursachen könnten. Dies führt zu erhöhter Betriebssicherheit und einer längeren Lebensdauer des gesamten Solarstromversorgungssystems. Zusätzlich ermöglicht die intuitive Steuerung über PC-Software oder mobile Apps eine einfache Fernüberwachung und -steuerung des Systems.
Ultraschnelles Maximum Power Point Tracking
Besonders unter wechselnden Lichtverhältnissen, wie bei bedecktem Himmel, steigert ein extrem schneller MPPT-Regler den Energieertrag erheblich und sichert eine Mindesteffizienz von 99,5%. Mit dem optimierten MPPT-Regelalgorithmus minimieren die Offgridtec-Controller aus der PRO-X Serie die MPP-Verlustrate sowie die MPP-Verlustzeit und verfolgen den maximalen Leistungspunkt (Multiple Peaks Maximum Power Point) des PV-Systems präzise. Dies garantiert die optimale Nutzung der Solarenergie unter allen Bedingungen und steigert das Energienutzungsverhältnis im Vergleich zur PWM-Lademethode um 10-30 %.
Technische Daten
System Nennspannung: 12/24/36/48VDC Auto
Nennladestrom: 40A
Nennentladestrom: 40A
Batteriespannung: 8 ~68V
max. PV-Leerlaufspannung: 150V/138V
MPP-Spannungsbereich: ~108V / Batteriespannung +2V
Nennladeleistung: 520W/12V 1040W/24V 1560W/36V 2080W/48V
max. Umwandlungswirkungsgrad: 98,5%
Volllast-Wirkungsgrad: 97,2%
Eigenverbrauch: ≤30mA(12V) ≤16mA(24V) ≤13mA(36-48V)
Spannungabfall im Entladekreis: ≤0.23V
RS485 Schnittstelle: 5VDC/200mA (RJ45)
Temperaturkompensationskoeffizient: -3mV/℃/2V
Erdung: übliche Minus-Erdung
Anschluss: 6AWG(16mm²) empf. Kabel: 6AWG(16mm²)
Abmessungen: 255×189×83,2 mm
Gewicht: 2,47 kg
Lieferumfang:
1× Offgridtec 1-01-017380 MPPT PRO-X 40A
1× Bedienungsanleitung
Der MPPT PRO-X Solarladeregler 40A (MPN: 017385) von Offgridtec setzt neue Maßstäbe für deine Solarversorgung. Der Regler de...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
1-01-011200
Offgridtec® MPPT Pro Duo charge controller 30A 12V 24V for two battery circuits
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A variety of different board battery types can be charged via the primary charging output (BATT-1). The battery spectrum ranges from AGM, GEL and liquid lead acid to state-of-the-art LiFePO4 and Li-NiCoMn battery systems. The secondary battery charge output (BATT-2) is designed for a starter battery that is at the same voltage level as BATT-1. The unit automatically detects the system voltage of the starter battery (BATT-2) and charging of the BATT-2 begins as soon as the preset conditions are met.
The controller uses the advanced MPPT control algorithm that minimises the maximum power point loss rate and loss time, quickly tracks the maximum power point (MPP) of the PV generator, and processes the maximum energy from the PV generator under all conditions. Energy utilisation in a PV system with MPPT controller is increased by 20 to 30% compared to the PWM charging method.
Features Highlights of the MPPT Pro DUO 30 A
Max Power-Point Tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%.
Advanced MPPT control algorithm to minimise MPP loss rate and minimise time loss.
Higher range of MPP operating voltage to improve PV module utilisation.
Possibility of limiting the charging power by user or automatic charging current (BATT-1).
Digital circuit control of adaptive three-stage charging mode to improve BATT-1 lifetime.
The product will enter power saving mode if no manual input has been made for a long time and charging conditions are not met (PV<5v).>
100% charge and discharge in the operating temperature range.
AES control signal for auto-refrigerator to avoid energy waste.
Standard Modbus protocol and RS485 communication port (5V/200mA).
Overview of the most important technical features
Maximum charging current: 30A at a battery voltage of 12V or 24V.
Optional remote display with mounting frame available.
Supports all major battery types.
Active temperature equalisation for optimal charging and ensuring long battery life.
Max. Solar power 390W at 12V system voltage and 780W at 24V system voltage.
100V max. PV input voltage
Grounding: Negative
Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH)
Connection terminals Battery 1: 16mm² (AWG6) / Battery 2: 4mm² (AWG12)
Weight: 1,4KG
Diameter of mounting holes: 5mm
Energy consumption: 26mA at 12V / 15mA at 24V
Max. Efficiency: 98
Intelligent energy saver
If there is no manual operation for an extended period of time and charging conditions are not present, the MPPT-Pro Duo will switch to energy saving mode, reducing the unit's energy consumption to a minimum. This behaviour also reduces wear and tear on the unit, which is reflected in a significantly longer service life. The system parameters are displayed and set directly via the intuitive control panel on the controller or via the MT11 remote control (accessory).
System communication and protection functions
The refrigerator's AES control signal is built into the controller, which delivers excess solar power to the refrigerator to prevent energy waste. The protection class of the MPPT Duo is IP33. It resists splashing water and is dust-tight. Our MPPT Pro DUO has multiple protection functions, including battery overcharge protection, discharge protection and reverse polarity protection of PV and battery, which effectively ensure the safety, stability and service life of the solar system.
Scope of delivery:
1x Offgridtec 1-01-011200 MPPT DUO charge controller.
1x instruction manual
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A vari...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
1-67-008530
Victron BlueSolar MPPT 100/30 12V 24V 30A
The Victron MPPT 100/30 (MPN SCC020030200) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends your solar system's output. Compared to the 75/15 this controller processes a higher PV-Voltage and therefore handles a 100V DC safely.
Next generation MPP-tracker
Especially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to PWM charge controllers. Besides a higher charging and PV-capacity this Blue varys from the lower models. The 100/30 allows the programming and saving of different charging algorithms. Those can be adjusted simply via a switch-wheel on the device. This is the first model without a consumer output.
Programming, real-time data and logging
Latest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.
Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately.
Important features:
Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudy
Integrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panel
Suitable for 12V and 24V systems
Rated charging amperage: 30A
440W max. PV-performance at 12V and 880W at 24V
30A consumer output with auto-shutdown at imminent battery undervoltage (deep discharge protection)
Reverse polarity protection
Multistep adaptive charging algorithm
Battery charging algorithm programmable
Integrated battery life algorithm extends battery life when activated and all consumers are connected to the consumer output
Day/night-time control and dimming options
VE.Direct data port integrated
VE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct.
Integrated battery life algorithm extends battery life
If the charge controller can't manage to fully charge the battery within a day the battery status switches constantly between "partly charged" and "end of discharge". This operation mode (no regular charging) is ideal for small lead batteries, for lead-acid batteries otherwise irregular charging and discharging can cause severe damage already after several months.
The battery life algorithm checks the battery's charging level and heightens the switch-off threshold from day to day. That means that connected consumers are switched off earlier until the produced energy is sufficient for a full battery charge of 100%. From this point on the threshold is modulated in a way that a full charge can be reached once a week.
Delivery Scope:
1x Victron SCC020030200 BlueSolar MPPT 100/30 12V 24V 30A charge controller
1x Manual
The Victron MPPT 100/30 (MPN SCC020030200) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
1-67-008550
Victron BlueSolar MPPT 150/45-MC4 12V 24V 48V 45A
The Victron MPPT 150/45MC4 (MPN SCC010045300) is part of the BlueSolar MPPT charge controller familiy. Ultra-fast powertracking and automatic MPP-voltage adjustment extend your solar system's output. Models from 150/45MC4 to 150/100MC4 are also available with screw clamps (35mm²) instead of MC4-connectors (solar input). Additionally this model supports concurrent operation with other controllers of the same type.
Programming, real-time data and loggingLatest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately.
Next generation MPP-trackerIn case of partial module shading there can be more than one point of maximum performance on the voltage curve. Common MPPTs tend to switch to a local MPP even if it not the ideal one. The innovative algorithm used in BlueSolar devices maximizes the energery outcome by always adjusting to the optimal MPP.Important features:
Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudy
Auto-detection of partly shading and adjustment to the ideal MPP - more outcome compared to "simple" MPPT charge controllers
Integrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panel
High effectivity of 98%
Concurrent operation with other 150/45 controllers possible
Constant charging voltage adjustable
Trickle charge voltage adjustable
Supported battery types: AGM, gel, lead-acid, calcium-calcium and lithium batteries
Solar connection via 2 MC4-connector pairs - two solar string possible, easy installation
Fully programmable charging algorithms that can be changed via a switch on the device
Rated charging amperage: 45A, 150V max. PV no-load voltage
12V: 650W / 24V: 1300W / 48V: 2600W
Integrated protection from reverse battery polarity
AQaptive multistep charging algorithm
Integrated temperature sensor adjusts Charging processes according to battery temperature
Day/night-time control and dimming options
Extensive protection functions from:
reverse battery polarity
PV current reflow
overheating
short-cicuits
reverse PV-connection polarity
VE.Direct data port integratedVE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct.
Delivery Scope:1x Victron SCC010045300 BlueSolar MPPT 150/45MC4 12V 24V 36V 48V 45A charge controller1x Manual
The Victron MPPT 150/45MC4 (MPN SCC010045300) is part of the BlueSolar MPPT charge controller familiy. Ultra-fast powertracking and automatic MPP-volt...
Shipped in 10-14 Werktage
Shipped in 10-14 Werktage
VAT-exempt delivery possible*
1-67-008520
Victron BlueSolar MPPT 75/15 12V 24V 15A
The Victron MPPT 75/15 (MPN SCC010015050R) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends your solar system's output.
Next generation MPP-tracker
Especially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to PWM charge controllers. Moreover the 75/15 comes with further innovative technologies.
Programming, real-time data and logging
Latest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.
Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately.
Important features:
Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudy
Integrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panel
Suitable for 12V and 24V systems
Rated charging amperage: 15A
200W max. PV-performance at 12V and 400W at 24V
15A consumer output with auto-shutdown at imminent battery undervoltage (deep discharge protection)
Reverse polarity protection
Multistep adaptive charging algorithm
Battery charging algorithm programmable
Integrated battery life algorithm extends battery life when activated and all consumers are connected to the consumer output
Day/night-time control and dimming options
VE.Direct data port integrated
VE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct.
Integrated battery life algorithm extends battery life
If the charge controller can't manage to fully charge the battery within a day the battery status switches constantly between "partly charged" and "end of discharge". This operation mode (no regular charging) is ideal for small lead batteries, for lead-acid batteries otherwise irregular charging and discharging can cause severe damage already after several months.
The battery life algorithm checks the battery's charging level and heightens the switch-off threshold from day to day. That means that connected consumers are switched off earlier until the produced energy is sufficient for a full battery charge of 100%. From this point on the threshold is modulated in a way that a full charge can be reached once a week.
Delivery Scope:
1x Victron SCC010015050R BlueSolar MPPT 75/15 12V 24V 15A charge controller
1x Manual
The Victron MPPT 75/15 (MPN SCC010015050R) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends...
Soon available again
Soon available again
VAT-exempt delivery possible*
1-67-011765
Victron SmartSolar MPPT 100/30 30A 12V/24V charge controller
The Victron Energy SmartSolar mppt 100/30 30a 12v/24v solar charge controller (mpn scc110030210), is new version of the BlueSolar 100/30. The Smart version differs only in the from the Blue version mainly by the permanently integrated Bluetooth communication module. This allows the SmartSolar charge controller to be fully monitored and analyzed on any app-enabled device. The required Victron Connect app can be installed free of charge. Optional, the MPPT-WireBox-M from Victron Energy is the ideal complement for your SmartSolar charge controller. It securely covers the cable inputs or connection terminals of the controller, protecting them from external influences and contact.
key product features of the SmartSolar 100/30 30a 12v 24v mppt
latest generation ultra-fast MPP tracker ensures best possible yield even in overcast conditions
integrated VE.Direct data communication port
high maximum efficiency of 98
for 12v and 24v systems
integrated Bluetooth module
30a maximum charge current
fully programmable charging algorithms that can later be manually activated and used via a switch on the case
100V maximum pv open circuit voltage
440W maximum pv power for 12v, 880w for 24v systems
integrated protection against battery polarity reversal
multi-stage and adaptive charging algorithm
Day/night time control and light dimming option
more protection compared to the smaller models in the SmartSolar mppt series
Compared to the 75/10, 75/15 and 100/15 model, the SmartSolar 100/30 mppt has overheating protection with shutdown function and automatic restart after reaching normal operating temperature
VE.Direct data communication port
VE.Direct in text mode transmits all important parameters to other devices linked to the charge controller every second, providing the possibility of communication with additional devices gx Color Control Panel from Victron. The VE.Direct connection is intended for products where a full Canbus integration (VE-Direct) would cause too high costs
High-speed MPP tracker of the latest generation
Especially in overcast conditions when light intensity is constantly changing, an extremely fast mppt controller improves energy output by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllers. In addition, the 100/30 features several other innovative technologies such as the VE.Direct communication port.
Options for programming, real-time data and viewing history
Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected, for example, via the integrated Bluetooth Smart Dongles and the mppt app or the gx Color Control. Please note that Bluetooth Smart Dongles and gx Color Control are separate items which are not included in the delivery of the charge controller but can be purchased optionally.
Flexible charging algorithms
Fully programmable charging algorithm (please refer to the software page on our website) as well as eight pre-programmed algorithms that can be selected via a rotary knob (please refer to our manual for more details)
Scope of delivery:
1x Victron Energy scc110030210 SmartSolar mppt 100/30 30a 12v/24v solar charge controller
1x user manual
The Victron Energy SmartSolar mppt 100/30 30a 12v/24v solar charge controller (mpn scc110030210), is new version of the BlueSolar 100/30. The Smart ve...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
1-67-011655
Victron SmartSolar MPPT 150/85-Tr solar charge controller
The Smartsolar mppt 150/85-tr from Victron Energy (mpn scc010085210), belongs to the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in case of partial shading are just 2 of the many highlights of this new class of devices. The devices of the classes 150/45tr to 150/100-tr are also available as a version with MC4 connections on the solar side of the charge controller instead of screw terminals. In addition, this model masters parallel operation with other controllers of the same type
Compared to the BlueSolar series, the Bluetooth module is already integrated in the controller of the Smartsolar family, which makes the smart dongle superfluous for this device. Also new is the optionally available lcd display, which can be simply plugged onto the SmartSolar 150/85-tr as required. The display then provides all the important information about the controller. Optional, the MPPT-WireBox-XL Tr from Victron Energy is the ideal complement for your SmartSolar charge controller. It securely covers the cable inputs or connection terminals of the controller, protecting them from external influences and contact.
smart data communication via VE.Direct and lightning-fast Bluetooth module
Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time
Automatic detection of the maximum power point in case of partial shading
In the case of partial shading, there may be two or more maximum power points (mppts) on the current-voltage curve. Conventional mppts tend to settle on a local mpp. However, this may not be the optimal mpp. The innovative algorithm of the SmartSolar device will always maximize the energy yield by adjusting to the optimal mpp
key product features of the SmartSolar 150/85-Tr 85a 12v 24v 36v 48v mppt
latest generation ultra-fast mpp tracker ensures best possible yield even in overcast conditions
automatic detection of mpp voltage in case of partial shading provides further yield improvement compared to "simple" mppt charge controller
with optional lcd display
integrated bluetooth module for app based analysis and configuration of the controller (via free Victron app on compatible devices)
optional lcd display available
integrated VE.Direct data communication port for connection to additional devices such as the gx Color Control Panel or a Smart bmv battery monitor
high maximum efficiency of 98
Parallel operation with other 150/85 controllers possible
Adjustable constant charge voltage
Adjustable float charge voltage
Suitable for all agm, gel, lead-acid calcium-calcium and lithium batteries
fully programmable charging algorithms which are later manually activated and toggled via a switch on the case
Rated charge current 85a, 150v maximum PV open circuit voltage
maximum PV power: 12v 1200w / 24v 2400w / 48v 4900W
integrated protection against battery polarity reversal
multi-stage and adaptive charging algorithm
remote on/off switching possible via 2-pin plug
Protection class ip 43 for the electronic components and protection class ip 22 for the connection area of the controller
integrated temperature sensor balances maintenance and constant charging voltage according to temperature
Day/night time control and light dimming option
Latest generation high speed mpp tracker
Especially in overcast conditions when light intensity is constantly changing, an extremely fast mppt controller improves energy output by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllers
extensive electronic protection
Reverse battery connection protection
PV reverse current blocking
Protection against overheating of the device
Protection against short circuits
Protection against reverse polarity PV connection
the VE.Direct data communication port
VE.Direct in text mode transmits all important parameters to other devices coupled to the charge controller every second, providing the possibility of communication with auxiliary devices system panel gx Color Control. The VE.Direct connection is intended for products where a full Canbus integration (VE-Direct) would be too costly. More information about VE.Direct can be found in our Victron Energy brand store
Scope of delivery
1x Victron scc010085210 SmartSolar mppt 150/85-Tr 12v 24v 36v 48v 85a charge controller
Instruction manual
The Smartsolar mppt 150/85-tr from Victron Energy (mpn scc010085210), belongs to the latest generation of smart solar controllers from the Dutch premi...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
1-67-011800
Victron Smartsolar MPPT 75/15 15A 12V 24V controller
The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the Bluesolar 75/15, the Smart version has integrated Bluetooth, which eliminates the need to purchase a Bluetooth dongel. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control.
The integrated Bluetooth in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices. Optional, the MPPT-WireBox-S 75 10/15 from Victron Energy is the ideal complement for your SmartSolar charge controller. It securely covers the cable inputs or connection terminals of the controller, protecting them from external influences and contact.
The most important technical features at a glance
15a max. charging current, suitable for 12v and 24v batteries
nominal PV power for 12v systems: 220W
nominal PV power for 24v systems: 440W
15a load output
high peak efficiency of 98%
freely programmable battery charging algorithm (via the free Victron Connect APP)
Light dimming functions programmable (via the free Victron Connect APP)
Ultra fast maximum power point tracking
max. PV open circuit voltage: 75V
Charging algorithm: multi-stage, adaptive
integrated Bluetooth modu
Ultra fast maximum power point tracking
Especially in overcast conditions when light intensity is constantly changing, an ultra-fast mppt controller improves power output by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllers.
intelligent load output
Deep discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a preset voltage value. Alternatively, an algorithm for intelligent battery management can be selected: see BatteryLife.
The load output is short-circuit proof.
Battery Life: intelligent battery management
If the solar charge controller is not able to charge the battery to its full capacity within a day, the status of the battery will constantly alternate between "partially charged" and "end of discharge". This mode of operation (no regular full charging) will damage a lead-acid battery within a few weeks or months.
The Battery-Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold day by day (i.e., disconnects the load earlier) until the energy gained is sufficient to charge the battery to near 100%. From this point, the load disconnection threshold is modulated so that charging to near 100% is achieved about once a week.
Scope of delivery:
1x Victron EnergySCC075015060R Smartsolar mppt 75/15 15a 12v 24v solar charge controller
1x user manual
The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v ba...
Shipped in 1-3 days
Shipped in 1-3 days