Phaesun Hybrid Charge Controller All Round 1000_24V

This controller is especially designed for caravans and boats. - up to 350Wp module performance- max. 21A module current- max. 50V module voltage Controllers according to the MPP technology are continuously and automatically calculating the maximum power yield (MPP) of the solar modules several times per minute. The voltage surplus of the solar module will be transformed to a higher charging current for the battery (realised by high-frequency switching controller technology with high efficiency). This surplus of charging current ensures short charging times and the best possible power yield of the solar system. Main Charging Port I: Automatic charging and conservation of charge of the (main) board supply battery Auxiliary Charging Port II: Current and voltage reduced for recharging as well as trickle charge of the vehicle’s starter battery, thus ensuring continuous starting capacity Continuous control, full batteries by immediate recharging in case of current consumption Automatic charging programs adjustable for gel, acid/lead-acid and AGM/fleece batteries for optimum charging results Indicators for operating state "Full", "Charging", "MPP" and "Low Voltage" Very low own electricity consumption, high efficiency Connection for Battery Temperature Sensor for temperature compensation

The high-end Phaesun Hybrid Charge Controller All Round 400_12 was especially developed for 12VDC offgrid wind/solar hybrid systems. Thanks to many control possibilities the All Round series is very well suited to wind/solar systems, street lighting and surveillance systems. Technical data: for 12VDC-systems wind energy: max. 33A (400W) solar energy: max. 12A (150W) 2 x DC outputs: max. 10A, 3 different modes Features:Reliability: Intellegent, module based design, simple mechanics, various functions. Thanks to high-quality components and a strict production process the regulator is able to last very long even under bad circumstances. Steplessly PWM regulatedVoltage and current limitating charging mode: when the battery's max. voltage is reached the controller switches to voltage limitating mode. If the voltage, produced by the wind turbine, exceeds the max. voltage the regulator slows down the turbine. Each DC output with various control modes LCD Display:The LCD display shows status information and system parameter in numbers and graphical form: battery voltage; wind generator voltage and output; solar module voltage and performance, charging current, output control modes,time control, light controll option, day/night detection, charging level, under/overvoltage of the battery, etc.

The mppt rs SmartSolar by Victron Energy (mpn: scc145120410) is a 48v solar charge controller with a PV input voltage of up to 450 vdc and an output current of 200a. It is used in grid-tied and off-grid Solaranapplications where maximum battery charging power is required. Features With ultra-fast maximum power point tracking (mppt) Multiple independent mppt tracking inputs Isolated PV connections for added safety Wide mppt voltage range Lightweight, efficient and quiet Integrated display and Bluetooth communication PV insulation resistance monitoring for safety at higher voltages VE.Can and VE.Direct connection I/O connections Configure and monitor with VictronConnect app or in VRM portal The integrated BluetoothSmart connection allows quick monitoring or configuration of settings via app. The integrated 30-day history shows the individual performance of each mppt tracker. The app enables the display of e.g. battery voltage and current, PV voltage and current, history data and trends. The VictronConnect app is available for Android, iOS, Windows and macOS x. When the solar controller is connected to a Gx device and the internet, the Victron Remote Management Portal (vrm) provides access to the full power of your SmartSolar rs charge controllers. Additional units connected in series The SmartSolar rs charge controller is equipped with VE.Can bus connections. This allows communication with additional SmartSolar rs & VE.Can mppt units. The additional units are simply "daisy chained" together with an RJ45 cable. When linked together, all individual charge controllers synchronize their charge levels. You can also send your data to a Gx device (such as the CerboGx) via the same cable for monitoring. Technical data Battery voltage: 48v Rated charging current: 200A Max. Charging power: 11.5 kW at 57.6V Charging algorithm: multi-stage adaptive (customizable) Max. DC PV voltage: 450V mppt operating voltage range: 80-450V Number of trackers: 4 Max. PV operating input current: 18a per tracker Protection class: IP21 Dimensions: 487 x 434 x 146 mm Weight: 13,7 kg Scope of delivery: 1x Victron SmartSolar mppt rs 450/200-rt 48v charge controller