Victron LiFePO4 12.8/200 Smart Battery 12.8V 200Ah 2560Wh

The LFP-BMS 12.8V 200Ah (MPN BAT512120610) from Victron Energy is a latest-generation LiFePO4 battery. When fully charged, the LFP 12.8/200 stores an impressive 2560Wh of power, with very low self-discharge and outstanding service life. The LFP battery family from Victron already features integrated cell balancing and a BMS (Battery Management System) interface

important technical data for the LFP BMS 12.8V 200Ah

• Nominal voltage: 12.8V
• Victron part number: BAT512120610
• Nominal energy at 25°C*: 2560Wh
• Nominal capacity at 25°C/0°C/-25°C: 200Ah / 160Ah / 100Ah
• Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles
• recommended continuous discharge current: <=200A
• maximum continuous discharge current: 500A
• Weight: 20 kg
• Connection terminal: M10

Further technical data can be found in the official data sheet and below in the "Technical data" section.

Efficient and economical: the LFP-BMS 12.8V 200Ah

Although Victron's LFP batteries are expensive compared to AGM or GEL batteries, the higher purchase costs will more than pay for themselves in most cases. With a service life of up to 5000 cycles, they exceed the maximum service life of even the best lead-acid batteries many times over. In addition, the LFP 12.8/200 scores 70% in terms of space and weight savings. At 92%, the energy efficiency is also significantly higher than the 80% of lead-acid batteries, which can be of essential importance, especially in off-grid systems, particularly in grid-independent solar and/or wind power systems.

Multitalented: infinitely flexible with lithium technology from Victron Energy

LFP lithium batteries from Victron can be integrated into almost all common applications. This technology has long played an important role in the mobile sector. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and are not affected by irregular charging, they are also making their way into land-based applications and can now be found in almost all system classes.

Parallel and series connection up to max. 3000AH at 48V

Thanks to the integrated cell balancing and cell monitoring function, you can conveniently connect up to 10 batteries of this type in parallel and up to four blocks of 10 in series, resulting in a maximum of 3000Ah at 48V – corresponding to a maximum storable nominal energy of around 154,000 Wh.

a total of 5 models available

The LFP-BMS family consists of a total of 5 models. In addition to the LFP 12.8/200, the following other performance classes are available:

• 12.8V 60Ah LiFePO4 768Wh
• 12.8V 90Ah LiFePO4 1152Wh
• 12.8V 160Ah LiFePO4 2048Wh
• 12.8V 300Ah LiFePO4 3840Wh

IMPORTANT NOTE: The use of an additional BMS is mandatory to interrupt or switch off the load if the voltage of a battery cell falls below 2.5V, to stop charging when the voltage of a battery cell rises above 4.2V, and to shut down the system when the temperature of the cell exceeds 50°C.

You can choose between the BMS 12/200 and the VE.Bus BMS – please refer to the respective product descriptions for further details about the devices.

Due to its classification as dangerous goods, this product is shipped by freight forwarder!

Scope of delivery:

1x LiFePO4 battery LFP-CB 12.8/200, Victron Energy BAT512120610
1x operating instructions

further resources on the topic of lithium batteries:

1. Victron LiFePO4 batteries - All product families from the LiFePO4 battery category from VE
2. Lithium batteries category – complete range with all available batteries in this category