Safe shopping with solar experts
Fast Shipping
Top choice renowned brands
Customer service:
+49 (0) 8721 91994-00

The Quattro 48/8000/110-100/100 (MPN QUA488020000) is a combination of a 48V 6500W sine inverter, a powerful battery charger and a transfer-switch.
It is equipped with 2 AC-outputs and 2 AC-inputs and therefore can be connected to 2 separate AC-sources, for example the public grid or a generator. The Quattro connects automatically to the active source.

The integrated battery charger provides 110A which allows quick charging even for bigger batteries as long as there is a grid connection.
The 48V sine inverter converts your DC battery current into a 230V AC current. Thanks to a pure sine wave this inverter is also suitable for sensitive electronic devices. Besides those two components there is also an integrated transfer-switch that enables you to realize many grid-tied solutions.
Integrating the Quattro into your system can be done via VE.Bus-port or 2 COM-port which allows nearly unlimited networking.

Extremely flexible thanks to 2 AC-input and 2 AC-outputs
The main output ensures uninterrupted operation. In case of a blackout or a failure in the grid/generator the Quattro takes over the supply of connected consumers. Switching happens so fast (<20ms) that the uninterrupted supply of computers and other electronic devices is ensured.
The second output only provides power if AC-power is available on one of the inputs. Consumers that must not discharge the battery - for example water boilers - can be connected to that output.

Important details:

  • 6500W constant output and 16.000W peak current, for 48V battery voltage
  • combination of inverter with transfer switch and 110A battery charger
  • provides pure 230V sine voltage at 50Hz
  • 2x AC-inputs with intergerated transfer-switch / 2 x 100A max. switch-current
  • 2x AC-outputs + 1 additional output that only works when AC-power is available on one of the AC-inputs.
  • VE.Bus communication port allows extensive possibilities in terms of connection, configuration and controlling of Victron Quattro devices
  • supports three-phase operation (3 units of the same model needed)
  • supports parallel operation - up to 6 units can be connected parallely to increase system power if needed
  • besides the VE.Bus-port Quattro devices come with 2 additional COM-ports which allow nearly unlimited system integration
  • PowerControl-function allows operation with limited generator performance as well as supply through limited shore or grid power
  • PowerAssist-function allows a 'performance-increase' of generators and supports shore power connection if needed
  • usable as UPS-solution (uninterrupted power supply) thanks to the integrated transfer-switch with 16A or 50A
  • usable for grid-tied systems which only drain power from the supplier when the battery current is not sufficient or other programmable events have happened
  • 3 separate relays - each programmable
  • compatible with many Victron control- and monitoring-panels
  • very high efficiency and low consumption

Massive performance extension
Up to 6 Quattros can be connected parallely. This creates a system with 6 48/10000/140 units 54 kW/60 kVA performance or 840A charging current. Three units can be configured for three-phase operation. But that's not all:
It is possible to connecte 6 x three-phase systems parallely to generate a massive inverter performance of 162 kW/180 kVA and over 2500A charging capacity.

PowerControl - operation with limited generator performance, shore or grid power
The Quattro is a powerful battery charger which drains a lot of power (nearly 10A/5kVA Multi at 230V AC) from the generator or grid. With help of the MultiControl panel you can adjust the max. power drained from the generator or grid. The Quattro then priors other connected AC-consumers and uses only the "surplus" of energy for charging.
This protects the generator or grid from an overload.

PowerAssist - performance-increase of generators and shore power connection
With this function PowerControl is put to a new dimension by enabling the Quattro to support small-dimensioned power sources. Load-peaks often occure only within limited periods. In this case the Quattro ensures that weak shore- or generator power is compensated instantly through battery power.

BackUp-System: AC-power also during blackouts
The Quattro can be integrated in off-grid systems, grid-tied PV-systems and systems using alternative energy sources. A software that detects blackouts and grid failures is also available.

Easy configuration
If setting of a device have to be changed this can be done with help of a DIP-switch within minutes.
Parallel-connected and three-phase systems can be configured via VE.Bus QuickConfigure and VE.Bus System Configurator software.

Monitoring and controlling on site
There are several option: battery protector, MultiControl panel, VE.Net Blue Power panel, Color Control Panel, smartphone or tablet (Bluetooth Smart), notebook or computer (USB or RS232).

Remote monitoring and controlling
Victron Ethernet Remote, Victron Global Remote and the Color Control Panel allow remote maintenance and monitoring of the Quattro. Addiationally system data can be saved for free on the VRM (Victron Remote Management) website.

Remote configuration
If the system is connected to the ethernet via the ColorControl-panel you are able to change settings remotely.

Delivery scope:
1x Victron QUA488020000 Quattro 48/8000/110-100/100 Combination of 48V 6500W sine inverter and 48V 110A battery charger + 2 AC-inputs with integrated transfer-switch
1x Manual

Victron_Quattro-3kVA-15kVA_Datasheet.pdf Download
Victron_ESS_Installationshandbuch.pdf Download
Victron_Automatic-Generator.pdf Download
Victron_Quattro-8000VA_Dimensions.pdf Download
Victron_Quattro-3kVA-15kVA_Datenblatt.pdf Download
Victron_VictronConnect-VE-Bus-Configuration_Manual.pdf Download
Victron_Quattro-5k-8k-10k-15K-100-100A-230V_Manual.pdf Download
Victron_ESS_Installation-Manual.pdf Download
Victron_VictronConnect-VE-Bus-Konfiguration_Handbuch.pdf Download
Victron_Quattro_CE.pdf Download
Battery outputs: male
Battery voltage: 48V
Continuous output: 6500W
Frequency range: 50Hz / +-0,1Hz
Manufacturer: Victron Energy
Own consumption in idle mode: 50W
Own consumption in standby: 20W
Product Type: Unit combination consisting of 48V to 230V sine wave voltage converter, battery charger and transfer switch. Compared to the Multiplus series, all Quattras have 2 switchable AC inputs and 2 AC outputs.
Protection type: IP21
Rated output voltage: 230V AC / alternating current
Sine wave: true sine wave
Temperature range: VE.Bus
Transfer switch integrated: Yes - 2 piece
Transfer switch power: 2x 100A
Voltage regulation: 48V DC / 230V AC
Warranty: 5 years manufacturer's warranty 2
Weight: 50 kg
offgridtec.com Reviews with ekomi.de
Loading products