Victron Wallbox EV charging station NS up to 22kW 1- and 3-phase electric car

The EV Charging Station NS 22 kW (MPN: EVC200300200) from Victron Energy is a powerful electric vehicle charging station that can be operated in both 3-phase and 1-phase modes. It delivers an impressive 22 kW AC power in 3-phase operation, while still providing a solid 7.3 kW in 1-phase mode. Although technically identical to the EV Charging Station, the new version features a modern design that is available in 3 different colors. Setup, configuration, and monitoring are conveniently done from VictronConnect via Bluetooth and/or the integrated web interface, which is accessible via a WiFi access point or WiFi LAN.

Furthermore, a GX device can be integrated, enabling remote control. It is particularly noteworthy that excess solar energy is used directly to charge your vehicle. Manual and time-controlled modes offer additional flexibility to meet the requirements of your electric vehicle, energy supply system, and general electric mobility.

about the EV Charging Station NS

• Powerful electric vehicle charging station
• Wi-Fi communication
• 1- or 3-phase operation
• Easy operation and control
• Via Bluetooth and VictronConnect app
• Illuminated ring for status display
• 3 operating modes available
• Optional colored fronts available
  • Black
  • White

Operation. Control and display

A single glance at the VictronConnect app or via Bluetooth gives you full control and an overview of all operating parameters and statistics. In addition, a Cerbo-GX communication center can be used for remote monitoring. The charging station is equipped with a fully programmable RGB light ring around the charging port, which allows you to see the status of the device at a glance. Using the integrated web interface, this light ring can be individually configured to display different light effects according to the current status (disconnected, charging, in operation, etc.).

Operating modes

Manual mode for configuring the output current: In manual mode, the output current can be flexibly configured in the range from 6 to 32 A. The charging power can be controlled in various ways. Either via the web interface, from a GX device and VRM remote monitoring, or using VictronConnect. This makes it easy to manually start or stop the charging process as soon as a vehicle is connected to the charging station.
Optional GX device for VRM remote monitoring:

• Victron GX Touch 50 display panel for Cerbo GX
• Victron GX Touch 70 display panel for Cerbo GX

Automatic mode to ensure maximum efficiency of the PV system: The charging station automatically detects when excess energy is available and uses only this energy to charge the vehicle. Instead of energy loss that would occur if excess energy were lost, it is stored in the vehicle's battery.
Time-controlled mode for charging the vehicle at specific times: Thanks to a fully programmable timer, the vehicle can be charged at different times. For example, during the night when grid costs are lower.

Technical data

• Input voltage range: 170-265V AC
• Nominal charging current: 32A / phase
• Rated power: 22 kW
• Current output range: 6-32 A
• Self-consumption: 15 mA at 230 V
• Operating temperature range: -25°C to +50°C
• Storage temperature range: -40°C to +80°C
• Protection class: IP44
• Weight: 3 kg
• Dimensions: 372 x 292 x 122 mm
• Data communication: Modbus TCP via WLAN, Bluetooth

Scope of delivery:

1x Victron Energy EV Charging Station NS 22 kW