Votronic 1440 Solar Data Extender 3-in-1
The Votronic Data Extender 3n1
The Solar Data Extender combines the data from up to three solar controllers so that it can be displayed on a single screen. The familiar LCD display can still be used. It is compatible with the following devices:
- Solar charge controllers with SR and MPP technology (from serial no. 14Vxx.xxxxx)
- VBCS Triple battery chargers
- LCD Solar Computer S (from serial no. 15V40.xxxxx)
- LCD Charge Control S
- VPC series with solar function
- Bluetooth Connector S-BC
Installation and connection
The Solar Data Extender can be retrofitted at any time. It has three independent inputs (IN1, IN2, IN3). The signals are combined and made available via the output (OUT). A solar display (e.g., LCD Solar Computer S) can be connected there.
It is connected between the Votronic solar charge controller and the solar display (e.g., LCD Solar Computer S) using the modular cable included in the scope of delivery. The IN1 connection must always be connected, as this is where the power supply for the device is provided.
Technical data
- Nominal voltage (supply via connected devices): 12V and 24V
- Operating voltage range: 8-32V
- Current consumption in standby mode, typical: 0.7 mA
- Current consumption during activity, typical: 10 mA
- Dimensions (WxHxD): 75 x 47 x 24 mm
- Weight: 37 g
- Test mark: CE
- Ambient conditions, humidity: max. 95% room humidity, non-condensing
Scope of delivery:
1x Votronic 1440 Data Extender 3n1
3x 6-pin control cable 0.5 m
1x operating instructions
Manufactuerer Information
Votronic
VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Straße 2
36341 Lauterbach
Germany
Mail: info@votronic.de
Tel.: +49 6641 911730