Safe shopping with solar experts
Fast Shipping
Top choice renowned brands
Customer service:
+49 (0) 8721 91994-00

The following data are measured, analyzed and displayed:

  • battery voltage 7 - 32V (internal measurement resolution 0,1V)
  • allows conclusions about battery behavour at different loads and serves as function control for chargers, solar-systems, alternators, etc. (warning light at overvoltage)
  • battery current (charge/discharge) +/-0 to max. +/-1800A, internal measurement resolution 0,1A
  • discharging currents (loads) by consumers, displayed by a "-"; charging currents, displayed by "charge"
  • battery capacity (Ah and %)
  • residual charge from 0Ah/0% (empty) to nominal capacity max. 2000Ah/100% (full)
  • voltage of 2nd battery (e.g. starter battery), 7 - 32V, internal measurement resolution 0,1V
  • programmable switching output (tactile)

How much residual charge does my board battery have? Is the battery state really “Full”? Why is energy taken from the battery, although the consumers had been switched-off?
The VOTRONIC LCD Battery Computer S gives the answer to these questions - exactly to percentage (%) an ampere-hour (Ah). At the touch of a button,
it informs comprehensively of the instantaneous charging state of the battery, the flowing battery current rates, as well as the voltage situation of the battery.
Based on the proved VOTRONIC LCD Battery Computer, the LCD Battery Computer S had been developed. The various display functions and the high operating convenience had been
extended by a neatly arranged LCD display with white background illumination, which offers excellent legibility, even from a distance and with unfavourable lighting conditions.

Since the unit is permanently in contact with “its battery”, it records and evaluates all battery actions. All charging and discharging currents are counted accurately.
Battery size, self-discharge, battery load etc. are considered by programmed characteristic diagrams. Even the smallest leakage current is detected and recorded. The residual
capacity of the battery is calculated from the measured values and the battery size. The result is a correct indication of the charging state (of the capacity, which is still
available, the residual charge) of the board battery as numerical value in Ampere-hours (“Ah”) and as percentage (“%”), as well as in form of a clear level bar, such as it is known from a fuel gauge. The LCD Battery Computer S is suitable for all battery types (acid, gel, AGM, lithium adjustable) with 12 V and 24 V battery voltage.

Of course, also the instantaneous battery voltage (“V”) and the instantaneous battery current (“A”) are displayed. Discharge current rates (consumers) are identified by a minus sign.
Furthermore, the discharge current rates are marked with a well legible sign “Charge”. Apart from that, there is a further display possibility for the voltage of a second battery,
such as for control of the vehicle’s starter battery.

The LCD Battery Computer S is equipped with a freely programmable terminal for control, supervision and warning purposes. It can, for example, be used for automatic switching of
consumers, independently of the board battery’s the charging state, or for warning signals. The on/off switching points can be adjusted freely and independently of each other as
percentage (%) allowing any switching function. At the press of a button, manual control is possible at any time.

Example for application: Automatic protection of the battery against harmful total discharge. The consumers are switched-off exactly according to charging state, for example, if
the charging state is less than 25 %. An EMERGENCY-ON button allows continued supply of the consumers. Consequently, the unit can also be used as remote-controlled battery main
switch (on/off) with protection against total discharge.

A plug-and-go cable connects display and robust Precision Measuring Resistor (Shunt), which is directly connected to the negative pole of the board battery, and which receives
the voltage and current rates of the battery. The terminal for connection of signal transmitters or powerful switching relays is also located here.

Matching to the VOTRONIC modular system, appearance and mechanics (identical height 85 mm) of the unit are adapted to the other display modules, and the small mounting depth of
only 22 mm allows an installation at almost any location.

Votronic_LCD_Batterie_Computer_Smart_Broschuere.pdf Download
Votronic_LCD_Batterie_Computer_S_Anleitung.pdf Download
Battery voltage: 12V and 24V
Compatible to: SR and MPP series solar controllers
Display: LCD with specific characters
Manufacturer: Votronic
Measuring range: 20 - 550 Wp
Power consumption: 3  - 30 mA
Product Type: Charge controller accessories
View: W, A, V, Ah, Wh
Weight: 70 g
offgridtec.com Reviews with ekomi.de
Loading products