Bluetti Premium 200 V2 Mobile Power Station 2073Wh 2700W

The Bluetti Premium 200 V2 Power Station (MPN: P-PR200V2-EU-GY-10) is your reliable and portable power source. With a capacity of 2073.6 Wh and a continuous output of 2700 W, it provides you with power wherever there is no outlet within reach. Whether as an emergency power solution for your home, when camping, during outdoor activities, or on the construction site. The high-quality LiFePO₄ battery technology ensures a particularly long service life and high safety. The power station recharges quickly, offers you many connection options, and can be conveniently controlled via app.

Highlights of the power station

• LiFePO₄ battery technology, capacity of 2073.6 Wh
• 7 connections: 1x cigarette lighter, 2x DC5521, 2x USB-A (15 W each), 2x USB-C (100 W each)
• Flexible charging options: wall outlet, car, generator, solar panel
• Various configuration options: AC charging mode, power lifting mode, ECO mode
• UPS function (switchover time ≤ 15 ms) for uninterruptible power supply
• App control via Bluetooth & Wi-Fi – conveniently monitor and control all functions via smartphone
• 5-year warranty, click here for more information

Your charging options – explained simply

Wall socket: You can conveniently charge your power station from a normal wall socket. Once the battery is full, the device automatically stops charging. Note: Please do not plug the supplied AC charging cable into the device's own AC sockets, as this may cause damage.
Car (12V / 24V): You also have the option of charging it on the go using your car's cigarette lighter socket. To do this, use the car charging cable and connect it to the 12V or 24V socket. Note: The car must be turned on during charging to ensure sufficient power flow. Be careful not to discharge the car battery too much.
Generator: Alternatively , you can use a generator to charge the battery. The charging process ends automatically as soon as the battery is full. Note: Use a pure sine wave generator that provides the appropriate voltage and frequency values and meets the requirements of your Premium 200 V2. It is best to activate the auto-adjust mode when charging with a generator. If the generator output is too low, you can set the maximum charging current in the app.
Solar panel: You can also charge your Premium 200 V2 in an environmentally friendly wayusing solar panels. Connect the solar panels either in series or in parallel and connect them to your device using the solar charging cable. Note: The panels should have the following values:

• Voltage between 12 V and 60 V
• Maximum current 20 A
• Maximum power 1000 W

Configuration via buttons or app

Settings mode: Here you can configure general settings for the power bank, such as frequency, AC charging mode, power lifting mode, ECO mode, Bluetooth, or Wi-Fi.
AC charging mode: Standard, Turbo, and Silent. Normally, the device charges in standard mode. For faster charging, you can select turbo mode, while silent mode is particularly quiet but also slower.
Power lifting mode: This mode is initially turned off. When activated, your power station can operate devices with pure resistance such as kettles, electric blankets, hair dryers, or other heating devices with up to 4,050 W.
ECO mode: The ECO modes for AC (alternating current) and DC (direct current) are switched on by default. This means that if you use little or no energy for a long period of time, it automatically switches off the respective output. This saves energy and protects your battery.

UPS function – power supply and intelligent switching

Simply connect your Premium 200 V2 to the wall outlet. Your connected devices will then be powered directly from the mains. In the event of a power failure, it switches to battery power in a flash within 15 milliseconds, so everything continues to run. You can conveniently set the various UPS modes in the app.

Standard mode: In standard mode, the battery charges using a combination of solar power and mains power. Solar energy always takes priority. As long as power is coming from the outlet, your devices are powered directly by it. If the power goes out, the power station automatically takes over the supply.
Time control mode: It charges automatically during cheaper nighttime rates and supplies you during the day when electricity is more expensive.
PV priority mode: This mode focuses on the use of solar energy. First, the power station charges via the mains to a certain charge level and then automatically switches to solar charging.
Custom mode: Set your own charging and discharging schedule, set individual limits for the battery's state of charge, and customize schedules and grid settings to suit your needs.

Intelligent control & full control

Control and monitor the power station conveniently via app using Bluetooth or Wi-Fi. The app allows you to switch outputs on and off, monitor charge levels, and adjust settings. The clear display shows you all the important information about battery status, inputs and outputs, and charge level in real time.

Technical data

DC output

• On-board power socket: 12 V/10 A
• 2x USB-A: 5 V/3 A
• 2x USB-C (PD3.0): 100 W max. per port, 5 - 20 V/3-5 A
• AC charging: 230 V, 10 A max., 2300 W max. (80% in 1 hour, 100% in 1.4 hours at 10 - 30 °C)
• AC input: 2300 W max. (charging + bypass)
• DC input (XT60PM-M): 1000 W max., 12 - 60 V, 20 A max.
• AC + DC input: 2400 W max.
• Switching time: ≤15 ms

General

• Battery capacity: 2073.6 Wh (54 Ah)
• Battery type: LiFePO4
• Charging temperature: 0°C - +40°C
• Discharge temperature: -20°C - +40°C
• Storage temperature
  • Up to 1 month: -10°C to +40°C
  • Longer than 1 month: -10°C to +35°C
• AC output: 2700 W total, 230V/11.7 A, 50 Hz / 60 Hz
• Weight: 24.2 kg
• Dimensions: 350 x 250 x 323.6 mm

Scope of delivery

1x Premium 200 V2 Portable Power Station
AC charging cable (1.5 m)
Grounding screw