Bluetti Premium 30 V2 Mobile Power Station 320Wh 600W

The Bluetti Premium 30 V2 Power Station (MPN: P-PR30V2-EU-GY-10) is a powerful, next-generation portable power source. With a capacity of 320 Wh and a continuous power output of 600 W, it’s ideal as an emergency power solution for your home, for camping, outdoor adventures, or on a construction site. In other words, anywhere where there’s no power available from a wall outlet. Thanks to modern LiFePO₄ battery technology, the battery is exceptionally durable and safe. It charges quickly, offers numerous connection options, and can be conveniently controlled via an app.

Highlights of the Power Station

• LiFePO₄ battery technology, 320 Wh capacity
• 9 ports: 1x cigarette lighter, 2x DC5521, 2x USB-A (15 W each), 2x USB-C (100 W & 140 W), 2x AC plugs
• Flexible charging options: wall outlet, car, generator, solar panel
• Various configuration options: AC charging mode, Power Lifting mode, ECO mode
• UPS function (switchover time ≤ 10 ms) for uninterrupted power supply
• App control via Bluetooth & Wi-Fi—conveniently monitor and control all functions via smartphone
• 5-year warranty; for more information, click here

Your Charging Options—Explained Simply

Wall outlet: You can conveniently charge your power station from a standard wall outlet. Once the battery is fully charged, the device automatically stops the charging process. Note: Please do not plug the included AC charging cable into the device’s own AC ports, as this may cause damage.
Car (12V / 24V): You can also charge it on the go using your car’s cigarette lighter socket. To do this, use the car charging cable and plug it into the 12V or 24V socket. Note: The car must be turned on while charging to ensure sufficient power flow. Be careful not to drain the car battery too much.
Generator: Alternatively , you can use a generator to charge the battery. The charging process ends automatically as soon as the battery is fully charged. Note: Use a pure sine wave generator that provides the appropriate voltage and frequency and meets the requirements of your Premium 30 V2. It’s best to enable the grid auto-adjustment mode when charging with a generator. If the generator’s output is too low, you can set the maximum charging current in the app.
Solar Panels: You can also charge your Premium 30 V2 in an eco-friendly wayusing solar panels. Connect the solar panels either in series or in parallel and connect them to your device using the solar charging cable. Note: The panels should have the following specifications:

• Voltage between 12 V and 28 V
• Current: maximum 10 A
• Maximum power: 200 W

Configuration via buttons or app

Settings Mode: Here you can adjust general settings for the power bank, such as frequency, AC charging mode, Power-Lifting mode, ECO mode, Bluetooth, or Wi-Fi.
AC charging mode: Standard, Turbo, and Silent. By default, the device charges in Standard mode. For faster charging, you can select Turbo mode, while Silent mode operates particularly quietly but also more slowly.
Power-Lifting Mode: This mode is initially turned off. When you activate it, your power station can power purely resistive devices such as kettles, electric blankets, hair dryers, or other heating appliances with a power rating of up to 1,500 W.
ECO Mode: The ECO modes for AC (alternating current) and DC (direct current) are enabled by default. So if you’re not using any power—or only very little—for an extended period, the device automatically shuts off the respective output. This helps you save energy and protect your battery.

UPS Function – Power Supply and Smart Switching

Simply plug your Premium 30 V2 into a wall outlet. Your connected devices will then be powered directly from the utility grid. In the event of a power outage, it switches to battery power in a flash—within 10 milliseconds—so everything keeps running. You can easily configure the various UPS modes in the app.

Standard Mode: In Standard Mode, the battery charges using a combination of solar power and grid power. Solar power always takes priority. As long as power is coming from the outlet, your devices are supplied directly from it. If the power goes out, the power station automatically takes over the supply.
Time-Control Mode: It charges automatically during off-peak nighttime rates and supplies power during the day when electricity is more expensive.
PV Priority Mode: This mode focuses on using solar energy. The battery first charges via the grid up to a certain state of charge and then automatically switches to solar charging.
Custom Mode: Set your own charging and discharging schedule, define custom limits for the battery’s state of charge, and adjust schedules and grid settings to suit your needs.

Smart Control & Full Control

Conveniently control and monitor the Powerstation via the app using Bluetooth or Wi-Fi. The app allows you to turn outputs on and off, monitor charge levels, and adjust settings. The clear display shows you all important information about battery level, inputs and outputs, and charge status in real time.

Technical Specifications

DC Output

• 1x cigarette lighter port: 12 V/10 A
• 2x DC5521: 12 V/5 A (per port), 8 A total
• 2x USB-A: 5 V/3 A (per port), 15 W max.
• 1x 100 W USB-C: 100 W max., 5 V – 20 V / 3 A – 5 A
• 1x 140 W USB-C: 140 W max., 5 V – 20 V/3 A – 5 A
• AC + DC output: 600 W max.

General

• Battery capacity: 320 Wh (20 Ah)
• Battery type: LiFePO4
• Charging temperature: 0°C – +40°C
• Discharge temperature: -20°C to +40°C
• Storage temperature: -20°C to +40°C
• AC charging: 380 W max., 80% in 50 min., at 25 °C
• AC input (with bypass): 980 W max.
• DC input: 200 W max., 12 V – 28 V, 10 A max.
• AC + DC input: 380 W max.
• AC output: 600 W total, 230 V/2.61 A, 50 Hz / 60 Hz
• Switching time: ≤10 ms
• Protection class: IP20
• Weight: 4.3 kg
• Dimensions: 250 x 178 x 167.5 mm

Package Contents

1x Premium 30 V2 Portable Power Station
AC charging cable (1.5 m)
Grounding screw