The Blue Smart ip22 12/30(1) charger from Victron Energy (mpn bpc123042002), is a professional, compact 12v 30a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/30(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/30(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/30(1) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/30(1) Blue Smart ip22 Charger Victron Part number: bpc123042002 charges 12v lead acid, gel, agm and lithium batteries 30a maximum charge current 1 battery charge output very compact dimensions: 235 x 108 x 65mm highly advanced seven-step charging algorithm with integrated Bluetooth for use with the free VictronConnect app other features of the 12/30(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/30(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc123042002 12/30(1) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 24/16(1) charger from Victron Energy (mpn bpc241642002), is a professional, compact 24v 16a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 24/16(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 24v lead batteries and modern lithium batteries. It offers Highlights of the 24/16(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 24/16(1) charger features built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the most important technical features of the 24/16(1) Blue Smart ip22 Charger Victron Part number: bpc241642002 charges 24v lead acid, gel, agm and lithium batteries 16a maximum charge current 1 battery charge output very compact dimensions: 235 x 108 x 65mm highly advanced, seven-stage charging algorithm with integrated Bluetooth for use with the free VictronConnect app other features of the 24/16(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 24/16(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 24v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc241642002 24/16(1) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 24/12(1) battery charger from Victron Energy (mpn bpc241242002), is a professional, compact 24v 12a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 24/12(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 24v lead batteries and modern lithium batteries. It offers Highlights of the 24/12(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 24/12(1) charger features built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the most important technical features of the 24/12(1) Blue Smart ip22 Charger Victron Part number: bpc241242002 charges 24v lead acid, gel, agm and lithium batteries 12a maximum charge current 1 battery charge output very compact dimensions: 235 x 108 x 65mm highly advanced, seven-stage charging algorithm with integrated Bluetooth for use with the free VictronConnect app other features of the 24/12(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 24/12(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 24v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc241242002 24/12(1) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/20(1) charger from Victron Energy (mpn bpc122042002), is a professional, compact 12v 20a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/20(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/20(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/20(1) charger features built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/20(1) Blue Smart ip22 Charger Victron Part number: bpc122042002 charges 12v lead-acid, gel, agm and lithium batteries 20a maximum charge current 1 battery charging output very compact dimensions: 235 x 108 x 65mm highly advanced, seven-stage charging algorithm with integrated Bluetooth for use with the free VictronConnect app other features of the 12/20(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/20(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc122042002 12/20(1) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/30(3) charger from Victron Energy (mpn bpc123044002), is a professional, compact 12v 30a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/30(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/30(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/30(3) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/30(3) Blue Smart ip22 Charger Victron Part number: bpc123044002 charges 12v lead acid, gel, agm and lithium batteries 30a maximum charge current 3 battery charging outputs very compact dimensions: 235 x 108 x 65mm highly advanced, seven-stage charging algorithm with integrated Bluetooth for use with the free VictronConnect app other features of the 12/30(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/30(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc123044002 12/30(3) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/15(1) charger from Victron Energy (mpn bpc121542002), is a professional, compact 12v 15a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/15(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/15(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/15(1) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/15(1) Blue Smart ip22 Charger Victron Part number: bpc121542002 charges 12v lead acid, gel, agm and lithium batteries 15a maximum charge current 1 battery charging output very compact dimensions: 235 x 108 x 65mm highly advanced, seven-stage charging algorithm with integrated Bluetooth for use with the free VictronConnect app other features of the 12/15(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/15(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc121542002 12/15(1) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 24/8(1) charger from Victron Energy (mpn bpc240842002), is a professional, compact 24v 8a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 24/8(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 24v lead batteries and modern lithium batteries. It offers Highlights of the 24/8(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 24/8(1) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 24/8(1) Blue Smart ip22 Charger Victron Part number: bpc240842002 charges 24v lead acid, gel, agm and lithium batteries 8a maximum charge current 1 battery charge output very compact dimensions: 235 x 108 x 65mm highly advanced, seven-stage charging algorithm with integrated Bluetooth for use with the free VictronConnect app other features of the 24/8(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 24/8(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 24v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc240842002 24/8(1) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/15(3) charger from Victron Energy (mpn bpc121544002), is a professional, compact 12v 15a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/15(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/15(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/15(3) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/15(3) Blue Smart ip22 Charger Victron Part number: bpc121544002 charges 12v lead-acid, gel, agm and lithium batteries 15a maximum charge current 3 battery charging outputs very compact dimensions: 235 x 108 x 65mm highly advanced, seven-stage charging algorithm with integrated Bluetooth for use with the free VictronConnect app other features of the 12/15(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/15(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc121544002 12/15(3) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/20(3) charger from Victron Energy (mpn bpc122044002), is a professional, compact 12v 20a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/20(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/20(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/20(3) charger features built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the most important technical features of the 12/20(3) Blue Smart ip22 Charger Victron Part number: bpc122044002 charges 12v lead-acid, gel, agm and lithium batteries 20a maximum charge current 3 battery charging outputs very compact dimensions: 235 x 108 x 65mm highly advanced, seven-stage charging algorithm with integrated Bluetooth for use with the free VictronConnect app other features of the 12/20(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/20(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc122044002 12/20(3) ip22 Blue Smart Charger 1x instruction manual