The lfp-bms 12.8v 330Ah (mpn bat512132410) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, lfp 12.8/330 stores a whopping 4220Wh of power with a very low self-discharge rate and superior cycle life. The lfp battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. Important technical data of the lfp bms 12.8v 330Ah: Rated voltage: 12.8v Victron Part number: BAT512132410 Rated energy at 25°C*: 4220Wh Rated capacity at 25°C/0°C/-25°C: 330Ah / 260Ah / 160Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: ≤300A maximum continuous discharge current: 400A Weight: 30kg Connection terminal: M10 For more technical data, please refer to the official data sheet and below in the "technical data" section. Efficient and economical: the lfp-bms 12.8v 330Ah Although Victrons lfp-batteries are expensive compared to AGM batteries or GEL batteries, the higher purchase cost will more than pay off in most cases. With a service life of up to 5000 cycles, they exceed the maximum service life of even the best lead-acid batteries many times over. In addition, the lfp 12.8/330 scores 70% in terms of space and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be essential for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy lfp lithium batteries from Victron can be integrated into almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 1650Ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 5 batteries of this type in parallel and up to 4 blocks of 5 in series, which results in a maximum of 1650Ah at 48v - this corresponds to a maximum storable nominal energy of about 79,000 Wh. A total of 7 models available The lfp-bms family consists of a total of 7 models. In addition to the lfp 12.8/330, there are the following other power classes: 12.8v - 50Ah - 640Wh 12.8v - 100Ah - 1280Wh 12.8v - 160Ah - 2048Wh 12.8v - 200Ah - 2560Wh 25.6v - 100Ah - 2560Wh 25.6V - 200-a Ah - 5120Wh IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt or shut down the load when the voltage of a battery cell drops below 2.8v or to stop charging when the voltage of a battery cell rises above 3.75v and to shut down the system when the temperature of the cell exceeds 60°C. For this purpose you have the choice between the bms 12/200 and the VE.Bus bms - For further details of the devices, please refer to the respective article descriptions. Due to the classification as dangerous goods, this product is shipped by freight forwarding! Scope of delivery: 1x LiFePO4 battery lfp-CB 12.8/330, Victron Energy BAT512132410 1x instruction manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category of VE Category Lithium Batteries - Total program with all available batteries from this range

The lfp-bms 12.8v 200Ah (mpn BAT512120610from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, lfp 12.8/200 stores a whopping 2560Wh of power with a very low self-discharge rate and superior cycle life. The lfp battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. important technical data of the lfp bms 12.8v 200Ah: Rated voltage: 12.8v Victron Part number: BAT512120610 Rated energy at 25°C*: 2560Wh Rated capacity at 25°C/0°C/-25°C: 200Ah / 160Ah / 100Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: <=200A maximum continuous discharge current: 500A Weight: 20kg Connection terminal: M10 For more technical data, please refer to the official data sheet and below in the "technical data" section. Efficient and economical: the lfp-bms 12.8v 200Ah Although Victrons lfp-batteries are expensive compared to AGM batteries or GEL batteries, the higher purchase cost will more than pay off in most cases. With a service life of up to 5000 cycles, they exceed the maximum service life of even the best lead-acid batteries many times over. In addition, the lfp 12.8/200 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be essential for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy lfp lithium batteries from Victron can be integrated into almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 3000 Ah at 48 V - this corresponds to a maximum storable nominal energy of around 154,000 Wh. 5 models available in total The lfp-bms family consists of a total of 5 models. In addition to the lfp 12.8/200, there are the following other power classes: 12.8v 60Ah LiFePO4 768Wh 12.8v 90Ah LiFePO4 1152Wh 12.8v 160Ah LiFePO4 2048Wh 12.8v 300Ah LiFePO4 3840Wh IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt or shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°C. For this you have the choice between the bms 12/200 and the VE.Bus bms - For further details of the devices, please refer to the respective item descriptions.Due to the classification as dangerous goods, this product is shipped by freight forwarding! Scope of delivery: 1x LiFePO4 battery lfp-CB 12,8/200, Victron Energy BAT512120610 1x instruction manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category of VE Category Lithium Batteries - Total program with all available batteries from this range

The LiFePO4 25.6v 100Ah Smart battery from Victron Energy (mpn bat524110610) is a latest generation LiFePO4 battery. When fully charged, the LiFePO4 25.6/100 Smart stores a whopping 2560Wh of power, with very low self-discharge and superior cycle life. The LifePO4 battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. The integrated Bluettoth for connection with the Li-Ion App completes the overall package. Features LiFePO4 25.6v 100Ah Smart Battery Rated voltage: 25.6v Built-in Bluetooth to connect with Victron Li-Ion app Rated energy at 25°c: 2560Wh Rated capacity at 25°c / 0°c / -20°c: 100Ah / 80Ah / 50Ah Number of cycles at depth of discharge 80% / 70% / 50%: 2500 / 3000 / 5000 Max. continuous discharge current: 200a Recommended continuous discharge current: <100a Weight: 28 kg Dimensions: 197 x 650 x 163 mm For more technical data, see the official data sheet and below in the "technical data" section. Efficient, economical..: LiFePO4 25.6v 100Ah Smart Battery While LiFePO4 batteries are expensive compared to agm or gel batteries, the higher initial cost will more than pay for itself in most cases. With a lifetime of up to 5000 cycles, they exceed the max. lifetime of even the best lead-acid batteries many times over. In addition, the lfp 25.6/100 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be of essential importance for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy LiFePO4 smart batteries from Victron can be implemented in almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes Parallel and series connection up to max. 1000Ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 1000Ah at 48v Integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful to detect a (possible) problem like cell imbalance in time.Important notice: The use of an additional bms is mandatory to interrupt/shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°c.For this you have the choice between the bms 12/200 and the VE.Bus bms - for further details of the devices, please refer to the respective article descriptions Due to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery: 1x Victron Energy bat524110610 25,6v 100Ah Smart Battery1x Instruction manual

The lithium SuperPack lsp 12.8/100 from victron Energy (mpn bat512110710) is a high-current lithium iron phosphate battery (LiFePO4) of the latest generation. With a capacity of 100 Ah and a nominal voltage of 12.8 v, it provides a solid 1280 Wh of energy at a weight of only 14 kilos. The Lithium SuperPack series is equipped with a bms, which takes over the most important tasks in the operation of a LiFePO4 battery. This means that the battery can be put into operation immediately without external accessories. Features of the victron lsp 12.8/100 battery victron Energy part number: bat512110710 Energy content: 1280Wh, nominal battery voltage: 12.8 v Capacity 100 Ah, 2500 cycles at DOD80% integrated battery management system requires no further external hardware for operation significantly lighter than comparable agm or gel batteries supports parallel operation Maximum cont. charging current: 100A The lsp 12,8/100- strong LowCost LiFePO4 battery in top quality The Lithium SuperPack series is victrons basic LifePO4 series and reduced to the most necessary to offer a model that is especially designed for a low purchase price. Compared to other LiFePO4 series from victron it does not have any possibilities to evaluate status information or to analyze data or any options for system integration. On the other hand, it is very easy to handle and can be put into operation immediately without any additional accessories. The cycle stability is also impressive: 2500 cycles are possible with 80 percent discharge and even more with less discharge. The integrated bms The integrated bms ensures that the battery cannot be damaged by cell overvoltage or cell undervoltage and provides the necessary voltage balance between the individual cells. The performance scope of the bms is rounded off by protection against overtemperature. Parallel operation possible The lsp 12.8/100 can be operated in parallel with any number of identical batteries to increase energy.Due to the classification as dangerous goods, this product is shipped by forwarding agency! Scope of delivery 1x victron bat512110710 lsp 12,8/100 Lithium SuperPack High Current

The lfp-bms 12.8v 160Ah (mpn bat512116610) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, lfp 12.8/160 stores a whopping 1152Wh of power with a very low self-discharge rate and superior cycle life. The lfp battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. important technical data of the lfp bms 12.8v 160Ah: Rated voltage: 12.8v Victron Part number: bat512116610 Rated energy at 25°c*: 2048Wh Rated capacity at 25°C/0°C/-25°C: 160Ah / 130Ah / 80Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: <=160A maximum continuous discharge current: 400a Weight: 20kg Connection terminal: M8 For more technical data, please refer to the official datasheet and below in the "technical data" section. Efficient and economical: the lfp-bms 12.8v 160Ah Although Victrons lfp-batteries are expensive compared to AGM batteries or GEL batteries, the higher purchase cost will more than pay off in most cases. With a service life of up to 5000 cycles, they exceed the maximum service life of even the best lead-acid batteries many times over. In addition, the lfp 12.8/160 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be essential for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy lfp lithium batteries from Victron can be integrated into almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 3000 Ah at 48 V - this corresponds to a maximum storable nominal energy of around 154,000 Wh 5 models available in total The lfp-bms family consists of a total of 5 models. In addition to the lfp 12.8/160, there are the following other power classes: 12.8v 60Ah LiFePO4 768Wh 12.8v 90Ah LiFePO4 1152Wh 12,8v 200Ah LiFePO4 2560Wh 12.8v 300Ah LiFePO4 3840Wh IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt or shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°c. For this you have the choice between the bms 12/200 and the ve.bus bms - For further details of the devices, please refer to the respective article descriptions. Due to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery: 1x LiFePO4 battery lfp-CB 12.8/160, Victron Energy bat512116610 1x instruction manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category by ve Category Lithium Batteries - Total program with all available batteries from this range

The ppp-40 12.8v 40Ah (mpn ppp012040000) from Victron Energy is a mobile lithium-ion storage solution based on intrinsically safe Li-FePO4 cells. With a rated capacity of 40Ah, the ppp-40 is the largest member of the Peak Power Pack family from Victron. At a nominal voltage of 12.8v, the battery pack offers 512Wh of energy for on-the-go use. In addition to very low self-discharge, this power pack also shines with excellent peak output current performance.important performance features of the peak power pack ppp-40 40Ah: low dead weight with only 8,6Kg, therefore ideal for outdoor use 40Ah (= 512Wh) storage capacity, 12,8v nominal voltage- integrated storage mode prevents too deep discharge during long time storage Output 1: integrated (maneuvering aid) high current output e.g. for maneuvering aid of small trailers Output 2: output for 12v DC power consumers with low current demand (max. 30a) based on latest LiFePo4 cell technology has a built-in charger for charging with 230v mains power Input 1: can be served by different DC power sources such as solar panels as long as they meet the current input specifications (see datasheet) Input 2: 230v mains connection for charging like mains power offers high safety even in case of improper use resistant to deep discharge and insufficient charging Also charging via vehicle battery at input 1 possible Remote on/off and status indication VE.Direct connection for pairing with smartphone or computer (optional accessory required) solid performance in solar as well as other applicationsWorks great in applications where charging current can be highly erratic, such as solar. Deep discharge and insufficient charging, or irregular cycling, would quickly damage a conventional lead-acid battery. For the LiFePO4 based ppp-40 Peak Power Pack 40Ah, however, such usage is not a problem.Smart energy storage: VE.Direct compatiblethe integrated VE.Direct connection allows you to connect your Peak Powerpack 40Ah 12.8v via the optionally available Bluetooth Smart Dongle with your app-enabled smartphone or tablet. Alternatively, you can also connect the VE.Direct to usb interface cable to connect the power pack to your computer or notebook.important technical features of the ppp-40 40Ah 12.8v power pack: Weight: 8.6Kg Dimensions: 212 x 190 x 172 mm monitoring and control: via supplied push button with 2 leds Communication: via integrated VE.Direct connection Due to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery:1x Victron Energy Peak Power Pack ppp-40 12,8v 40Ah 512,Wh, mpn PPP0120400001x mounting strap1x power adapter1x power cable1x push button with cable (2 m) and bicolor led 1x instruction manual

The LiFePO4 12.8v 100ah Smart Battery (mpn bat512110610) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, the LiFePO4 12.8/100 Smart stores a whopping 1280Wh of power, with a very low self-discharge rate and superior battery life. The LiFePO4 battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. The integrated Bluetooth for connection with the Li-Ion App completes the overall package. Victron LiFePO4 12.8v 100ah Smart Battery Rated voltage: 12.8v built-in bluetooth to connect with Victron Li-Ion app Victron Part number: bat512110610 Rated energy at 25°c*: 1280Wh Rated capacity at 25°c/0°c/-25°c: 100ah / 80Ah / 50Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: 100a maximum continuous discharge current: 200a Weight: 16kg Connection terminal: m8 For more technical data, please refer to the official data sheet and below in the "technical data" section. efficient, economical..: LiFePO4 12.8v 100ah Smart Battery While LiFePO4 batteries are expensive compared to agm batteries or gel batteries, the higher initial cost will more than pay for itself in most cases. With a lifetime of up to 5000 cycles, they exceed the maximum lifetime of even the best lead-acid batteries many times over. In addition, the lfp 12.8/100 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be of essential importance for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy LiFePO4 smart batteries from Victron can be implemented in almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 3000Ah at 48v - this corresponds to a maximum storable nominal energy of around 154,000 Wh (when used with the 300Ah 12.8v version). integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful to detect a (possible) problem like cell imbalance in time. IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt/shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°c. For this you have the choice between the bms 12/200 and the ve.bus bms - For further details of the devices, please refer to the respective article descriptions. Due to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery: 1x Victron Energy bat512110610 LiFePO4 12.8v 100ah Smart Battery1x user manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category by ve Category Lithium Batteries - Total program with all available batteries from this range

The lithium SuperPack lsp 25.6/50 from victron Energy (mpn bat524050705) is a lithium iron phosphate battery (LiFePO4) of the latest generation. With a capacity of 50 Ah and a nominal voltage of 25.6 v, it provides a solid 1280 Wh of energy at a weight of only 14 kilos. The Lithium SuperPack series is equipped with a bms, which takes over the most important tasks in the operation of a LiFePO4 battery. This means that the battery can be put into operation immediately without external accessories. Features of the victron lsp 25.6/50 battery victron Energy part number: bat524050705 Energy content: 1280Wh, nominal battery voltage: 25.6 v Capacity 50 Ah, 2500 cycles at DOD80% integrated battery management system requires no further external hardware for operation significantly lighter than comparable agm or gel batteries supports parallel operation the lsp 25,6/50 - strong LowCost LiFePO4 battery in top quality The Lithium SuperPack series is victrons basic LifePO4 series and reduced to the most necessary to offer a model that is especially designed for a low purchase price. Compared to other LiFePO4 series from victron it does not have any possibilities to evaluate status information or to analyze data or any options for system integration. On the other hand, it is very easy to handle and can be put into operation immediately without any additional accessories. The cycle stability is also impressive: 2500 cycles are possible with 80 percent discharge and even more with less discharge. the integrated bms The integrated bms ensures that the battery cannot be damaged by cell overvoltage or cell undervoltage and provides the necessary voltage balance between the individual cells. The performance scope of the bms is rounded off by protection against overtemperature. Parallel operation possible The lsp 25.6/50 can be operated in parallel with any number of identical batteries to increase energy.Due to the classification as dangerous goods, this product is shipped by forwarding agency! Scope of delivery 1x victron bat524050705 lsp 25,6/50 Lithium SuperPack

The lithium SuperPack lsp 12.8/20 from victron Energy (mpn bat512020705) is a lithium iron phosphate battery (LiFePO4) of the latest generation. With a capacity of 20 Ah and a nominal voltage of 12.8 v, it provides a solid 256 Wh of energy at a weight of only 3.5 kilos. The Lithium SuperPack series is equipped with a bms, which takes over the most important tasks in the operation of a LiFePO4 battery. This means that the battery can be put into operation immediately without external accessories. Features of the victron lsp 12.8/20 battery victron Energy part number: bat5120705 Energy content: 256Wh, nominal battery voltage: 12.8 v Capacity 20Ah, 2500 cycles at DOD80% integrated battery management system does not require additional external hardware for operation significantly lighter than comparable agm or gel batteries supports parallel operation the lsp 12,8/20- strong LowCost LiFePO4 battery in top quality The Lithium SuperPack series is victrons basic LifePO4 series and reduced to the most necessary to offer a model that is especially designed for a low purchase price. Compared to other LiFePO4 series from victron it does not have any possibilities to evaluate status information or to analyze data or any options for system integration. On the other hand, it is very easy to handle and can be put into operation immediately without any additional accessories. The cycle stability is also impressive: 2500 cycles are possible with 80 percent discharge and even more with less discharge the integrated bms The integrated bms ensures that the battery cannot be damaged by cell overvoltage or cell undervoltage and provides the necessary voltage balance between the individual cells. The performance scope of the bms is rounded off by protection against overtemperature. Parallel operation possible The lsp 12.8/20 can be operated in parallel with any number of identical batteries to increase energy.Due to the classification as dangerous goods, this product is shipped by forwarding agent! Scope of delivery 1x victron bat5120705 lsp 12,8/20 Lithium SuperPack

The lithium SuperPack lsp 12.8/200 from victron Energy (mpn bat512120705) is a lithium iron phosphate battery (LiFePO4) of the latest generation. With a capacity of 200 Ah and a nominal voltage of 12.8 v, it provides a solid 256 Wh of energy at a weight of only 30 kilos. The Lithium SuperPack series is equipped with a bms, which takes over the most important tasks in the operation of a LiFePO4 battery. This means that the battery can be put into operation immediately without external accessories. Features of the victron lsp 12.8/200 battery victron Energy part number: bat512120705 Energy content: 2560Wh, nominal battery voltage: 12.8 v Capacity 200 Ah, 2500 cycles at DOD80% integrated battery management system requires no further external hardware for operation significantly lighter than comparable agm or gel batteries supports parallel operation the lsp 12,8/200- strong LowCost LiFePO4 battery in top quality The Lithium SuperPack series is victrons basic LifePO4 series and reduced to the most necessary to offer a model that is especially designed for a low purchase price. Compared to other LiFePO4 series from victron it does not have any possibilities to evaluate status information or to analyze data or any options for system integration. On the other hand, it is very easy to handle and can be put into operation immediately without any additional accessories. The cycle stability is also impressive: 2500 cycles are possible with 80 percent discharge and even more with less discharge. the integrated bms The integrated bms ensures that the battery cannot be damaged by cell overvoltage or cell undervoltage and provides the necessary voltage balance between the individual cells. The performance scope of the bms is rounded off by protection against overtemperature. Parallel operation possible The lsp 12.8/200 can be operated in parallel with any number of identical batteries to increase energy. Due to the classification as dangerous goods, this product will be shipped by forwarding agency! Scope of delivery 1x victron bat512120705 lsp 12,8/200 Lithium SuperPack

The LiFePO4 25.6v 200Ah Smart Battery (mpn bat524120610) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, the LiFePO4 25.6/200 Smart stores a whopping 5120Wh of power and does so with a very low self-discharge rate and an outstanding lifespan. The LiFePO4 battery family from Victron already has integrated cell balancing and a bms (battery management system) interface. The integrated Bluetooth for connection with the Li-Ion App completes the overall package. Victron LiFePO4 25.6v 200ah Smart Battery Rated voltage: 25.6v built-in bluetooth to connect with Victron Li-Ion app Victron Part number: bat524120610 Nominal energy at 25°C*: 5120Wh Rated capacity at 25°C/0°C/-25°C: 200Ah / 160Ah / 100Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: <200A maximum continuous discharge current: 400A Dimensions: 237 x 650 x 163 mm Weight: 39kg Connection terminal: M8 For more technical data, please refer to the official data sheet and below in the "technical data" section. efficient, economical..: LiFePO4 25.6v 200Ah Smart Battery While LiFePO4 batteries are expensive compared to agm batteries or gel batteries, the higher initial cost will more than pay for itself in most cases. With a lifetime of up to 5000 cycles, they exceed the maximum lifetime of even the best lead-acid batteries many times over. In addition, the lfp 25.6/200 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be of essential importance for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy LiFePO4 smart batteries from Victron can be implemented in almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 3000Ah at 48v - this corresponds to a maximum storable nominal energy of around 154,000 Wh (when used with the 300Ah 12.8v version). integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful to detect a (possible) problem like cell imbalance in time. IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt/shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°C. Suitable for this purpose is the VE.Bus bms - for further details please refer to the respective item descriptions.Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1x Victron Energy bat524120610 LiFePO4 25.6v 200ah Smart Battery 1x user manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category of VE Category Lithium Batteries - Total program with all available batteries from this range

The lithium SuperPack lsp 12.8/60 from victron Energy (mpn bat512060705) is a lithium iron phosphate battery (LiFePO4) of the latest generation. With a capacity of 60 Ah and a nominal voltage of 12.8 v, it provides a solid 256 Wh of energy at a weight of only 9.5 kilos. The Lithium SuperPack series is equipped with a bms, which takes over the most important tasks in the operation of a LiFePO4 battery. This means that the battery can be put into operation immediately without external accessories. Features of the victron lsp 12.8/60 battery victron Energy part number: bat512060705 Energy content: 768Wh, nominal battery voltage: 12.8 v Capacity 60 Ah, 2500 cycles at DOD80% integrated battery management system requires no further external hardware for operation significantly lighter than comparable agm or gel batteries supports parallel operation Dimensions (LxWxH) mm 229 x 138 x 213 Weight 9,5kg the lsp 12,8/60- strong LowCost LiFePO4 battery in top quality The Lithium SuperPack series is victrons basic LifePO4 series and reduced to the most necessary to offer a model that is especially designed for a low purchase price. Compared to other LiFePO4 series from victron it does not have any possibilities to evaluate status information or to analyze data or any options for system integration. On the other hand, it is very easy to handle and can be put into operation immediately without any additional accessories. The cycle stability is also impressive: 2500 cycles are possible with 80 percent discharge and even more with less discharge. the integrated bms The integrated bms ensures that the battery cannot be damaged by cell overvoltage or cell undervoltage and provides the necessary voltage balance between the individual cells. The performance scope of the bms is rounded off by protection against overtemperature. Parallel operation possible The lsp 12.8/60 can be operated in parallel with any number of identical batteries to increase energy.Due to the classification as dangerous goods, this product is shipped by forwarding agency! Scope of delivery 1x victron bat512060705 lsp 12.8/60 Lithium SuperPack

The ppp-30 12.8v 30Ah (mpn ppp012030000) from Victron Energy is a mobile lithium-ion storage solution based on intrinsically safe Li-FePO4 cells. With a rated capacity of 30Ah, the ppp-30 is the second smallest member of the Peak Power Pack family from Victron. At a nominal voltage of 12.8v, the battery pack offers 384Wh of energy for on-the-go use. In addition to very low self-discharge, this power pack also shines with excellent peak output current performance.important performance features of the peak power pack ppp-30 30Ah: low dead weight with only 3,8Kg, therefore ideal for outdoor use 30Ah (= 384Wh) storage capacity, 12,8v nominal voltage- integrated storage mode prevents too deep discharge during long time storage Output 1: integrated (maneuvering aid) high current output e.g. for maneuvering aid of small trailers Output 2: output for 12v DC power consumers with low current demand (max. 30a) based on latest LiFePo4 cell technology has a built-in charger for charging with 230v mains power Input 1: can be served by different DC power sources such as solar panels as long as they meet the current input specifications (see datasheet) Input 2: 230v mains connection for charging like mains power offers high safety even in case of improper use resistant to deep discharge and insufficient charging Also charging via vehicle battery at input 1 possible Remote on/off and status indication VE.Direct connection for pairing with smartphone or computer (optional accessory required) solid performance in solar as well as other applicationsWorks great in applications where charging current can be highly erratic, such as solar. Deep discharge and insufficient charging, or irregular cycling, would quickly damage a conventional lead-acid battery. For the LiFePO4-based ppp-30 Peak Power Pack 30Ah, however, such usage does not pose a problem.Smart energy storage: VE.Direct compatiblethe integrated VE.Direct connection allows you to connect your Peak Powerpack 30Ah 12.8v via the optionally available Bluetooth Smart Dongle with your app-enabled smartphone or tablet. Alternatively, you can also connect the VE.Direct to usb interface cable to connect the power pack to your computer or notebook.important technical features of the ppp-30 30Ah 12.8v power pack: Weight: 5.4Kg Dimensions: 172 x 190 x 172mm monitoring and control: via supplied push button with 2 leds Communication: via integrated VE.Direct connection Due to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery:1x Victron Energy Peak Power Pack ppp-30 12,8v 30Ah 384,Wh, mpn PPP0120300001x mounting strap1x power adapter1x power cable1x push button with cable (2 m) and bicolor led 1x instruction manual