Offgridtec Roof bushing 1-fold white for cable diameter 13mm-18mm

This high-quality cable is needed to connect your charging regulator to an accumulator. The cable comes with a wire end sleeve for a connection to the charging regulator and M8 circular eyelets to connect to a battery. The binding posts are included in the scope of delivery. Features: 1,5m /2 x 6mm² battery cable with 20A fuse connects charging regulator and battery professional manufactured high-quality materials quick and easy installation Technical data:Cable diameter: 2 x 6mm²Fuse: 20ALength: 1,5m

Sikaflex 252 is an elastic one-component polyurethane adhesive specially developed for bonding large assemblies in vehicle construction. Sikaflex 252 is suitable for bonding coated metal, gfk, ceramic materials and plastics Properties Good adhesion to a wide range of substrates Suitable even for high dynamic loads Good gap filling properties can be painted over Vibration damping Electrically non-conductive Technical data Chemical base: 1-pack polyurethane Color: white Curing mechanism: moisture curing Density before curing depending on color: 1.2 kg/l Stability: Good Working temperature Ambient: 10 to 35 °C Skin forming time (cqp019-1): 40 minutes Shore a hardness (cqp023-1 / iso 7619-1): 50 Tensile strength (cqp036-1 / iso 527): 3 MPa Elongation at break (cqp036-1 / iso 527): 400 % Tear resistance (cqp045-1 / iso 34): 7 N/mm Tensile shear strength (cqp046-1 / iso 4587): 2.5 MPa Durability (cqp016-1): 12 months application Sikaflex 252 is suitable for assemblies exposed to dynamic loads.Suitable substrates are wood, metals, especially aluminum (also anodized),Sheet steel (also phosphated, chromated or galvanized), metal primers andPaints (two-component systems), ceramic materials and plastics.Follow manufacturer's recommendations before using Sikaflex 252 on materials at risk of stress crackingMaterials. To ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the relevant conditions. Processing Sikaflex 252 can be processed between 10 °C and 35 °C (climate and product). changes in reactivity and application properties must be taken into account. The optimum temperature for substrate and adhesive is between 15 °C and 25 °C.Note viscosity increase at cool temperatures. For easy application, warm theWarm the adhesive to room temperature. For an even adhesive layer thickness, it is recommended to apply the adhesive in the form of a triangular bead. Apply Sikaflex 252 with a suitable cartridge/bag gun or pumping equipment. The skin forming time is significantly shorter in hot and humid climates. Always join components within the skin forming time. Do not grout after a skin has formed. Scope of delivery 1x Sikaflex 252 assembly adhesive white

These ABS spoilers are an ideal mounting system in terms of weight and stability. This set includes fitting screws (stainless steel), the screw holes are predrilled and deflashed.Additionally this set comes with a manual for a professional installation. As an adhesive we recommend the assembly glue Sikaflex 252i (not included). Features:Length: 55cmManufacturer: OffgridtecManufacturer's unit number: 00650Material: ABSFinish: polishedColor: blackWeight: 0.640kgDelivery scope: 2x ABS Spoiler 55cm, 8x A2 steel screws, 8x flat washers with rubber coating, installation manual  

The heavy-duty version of the 2-fold cable roof gland in the colour black. Made of solid ABS plastic and equipped with an IP68 screw connection. The bushings are designed for use in mobile areas on cars, mobile homes or boats. The ideal roof duct for medium mechanical stress (occasional access for maintenance or cleaning). Compared to the light version, 4 times the amount of ABS plastic has been used. The roof grommet is suitable for cables with an outer diameter of 3-12mm. No information can be given on the suitable cable cross-section, as the thickness of the cable insulation can vary. If the roof duct has been professionally bonded, it offers solid protection against penetrating moisture and dust in conjunction with the PEG glands. The glands comply with protection class IP68 and are included in the scope of delivery. As an adhesive, we recommend the Dekalin MS-5 adhesive set. (Not included in the scope of delivery). Product featuresHeight: 40mmManufacturer: OffgridtecInputs: 2Suitable for cable outer diameters of 3-12mmMaterial: ABS plasticColour: BlackWeight: 0.225 kilogramFitting: 2x PEG fitting with rubber sealing ring (IP 68)Offgridtec part number: 006570

Light version of the roof cable entry with one entry in white. Made of sturdy ABS plastic and equipped with an IP68 screwing. These cable entries are designed for mobile applications on cars, caravans and boats.An ideal item for medium mechanical loads, for example walking over it occasionally during maintenance or cleaning. If adhered properly these cable entries together with an PEG-screwing provide decent protection from humidity and dust. The screwing complies with IP68 and is included, of course. As adhesive we recommend the Sika 252i (not included). Details:Height: 40mmManufacturer: OffgridtecEntries: 1Material: ABSColor: whiteWeight: 0,036kgScrewing: 1x PEG-screwing with rubber sealing (IP68)MPN: 006430