Skip to main content Skip to search Skip to main navigation

until our Offgridtec Black Weeks 2026 - Get early bird access

Safe shopping with solar experts
Fast Shipping
Top choice renowned brands
Customer service:
+49 (0) 8721 91994-00

Similar Products

VAT-exempt delivery possible*
Frontansicht: blauer, rechteckiger Victron Phoenix 12/1200 Ve.Direct Inverter mit aufgedrucktem Logo und Modellbezeichnung
1-67-024819
Victron Phoenix Inverter 12/1200 230V VE.Direct 1000W 12V Schuko
€275.13* €231.20**

The Victron Phoenix 12/1200VE.Direct (MPN PIN122121210) is a compact pure sine wave inverter with a continuous power output of 1200W and a Schuko outl...

Shipped in 1-3 Days (Mo-Fri)

Shipped in 1-3 Days (Mo-Fri)

VAT-exempt delivery possible* New
Victron Wechselrichter blau 12V 500W Frontalansicht Vorderseite
1-67-025502
Victron Energy Inverter 12/500 230V VE.Direct Schuko
€143.63* €120.70**

The Victron Energy Inverter 12/500 230V VE.Direct SCHUKO (MPN: PIN121501210) converts the DC voltage from a 12-V battery system into 230-V AC voltage ...

Product is expected to be back in stock on 8 December 2026

Product is expected to be back in stock on 8 December 2026

Discount 31,82 %
Phoenix Inverter 12/800 230V VE.Direct IEC 800VA 650W 12V
1-67-014445
Phoenix Inverter 12/800 230V VE.Direct IEC 800VA 650W 12V
€233.66* €342.72* (31.82% saved)

The Victron Phoenix 12/800 VE.Direct IEC (MPN PIN121801100) is a sine wave inverter with 650W continuous power. It converts 12V DC voltage from your b...

Shipped in 2-5 Days (Mo-Fri)

Shipped in 2-5 Days (Mo-Fri)

Matching Products

Victron 1.8 m VE.Direct cable connection cable
8-67-008690
Victron 1.8 m VE.Direct cable connection cable
€15.17*

1.8 Meter (€8.43 / 1 Meter)

Content: 1.8 Meter (€8.43 / 1 Meter)

The 1.80 m VE.Direct Cable from Victron (ASS030530218) is required to connect devices that are to communicate with each other via the VE-Direct port. ...

Shipped in 2-5 Days (Mo-Fri)

Shipped in 2-5 Days (Mo-Fri)

Victron VE.Direct Bluetooth Smart Dongle
1-67-008720
Victron VE.Direct Bluetooth Smart Dongle
€42.48*

With the Victron VE.Direct Smart Dongle Bluetooth (MPN ASS030536010), you can access live status information directly via your smartphone, computer, o...

Shipped in 1-3 Days (Mo-Fri)

Shipped in 1-3 Days (Mo-Fri)

Victron VE.Direct to USB interface cable 1.8 m
1-67-010410
Victron VE.Direct to USB interface cable 1.8 m
€30.35*

1.78 Meter (€17.05 / 1 Meter)

Content: 1.78 Meter (€17.05 / 1 Meter)

The Victron VE.Direct to USB Interface (MPN ASS030530010) is required to connect Victron devices with VE.Direct connection to a notebook or computer v...

Shipped in 1-3 Days (Mo-Fri)

Shipped in 1-3 Days (Mo-Fri)

Victron Filax 2 transfer switch CE 230V/50Hz-240V/60Hz
1-67-013420
Victron Filax 2 transfer switch CE 230V/50Hz-240V/60Hz
€279.17*

The ultra-fast Filax transfer switch from Victron Energy (MPN SDFI0000000) is designed to switch important or sensitive consumers such as computers, i...

Shipped in 1-3 Days (Mo-Fri)

Shipped in 1-3 Days (Mo-Fri)

VAT-exempt delivery possible* Preorder 03.12.2026
Victron SmartShunt 500A/50mV battery monitor
1-67-012690
Victron SmartShunt 500A/50mV battery monitor
€108.23* €90.95**

The SmartShunt 500A from Victron Energy (MPN SHU050150050) is a smart all-in-one battery monitor. It connects via Bluetooth to the VictronConnect app ...

Product is expected to be back in stock on 3 December 2026

Product is expected to be back in stock on 3 December 2026

The Victron Energy Inverter 12/375 230V VE.Direct SCHUKO (MPN: PIN121371210) converts the DC voltage from a 12-V battery system into 230-V AC voltage and supplies it via a Schuko outlet. The inverter delivers 375 W of continuous power at 25 °C, up to 450 W for ten seconds, and 600 W of peak power for two seconds. This makes it suitable for powering compatible 230-V loads in mobile and stationary battery systems. The VE.Direct interface allows you to monitor operating data and adjust key settings. ECO mode reduces self-consumption to as low as 1 W when the load is low or absent.

Victron 12/375 Inverter with VE.Direct and Schuko Output

  • 375 W continuous power at 25 °C and 300 W at 40 °C
  • 450 W for up to ten seconds
  • 600 W peak power for up to two seconds
  • 230 V Schuko output for compatible AC loads
  • VE.Direct interface for monitoring and configuration
  • ECO mode with only 1 W no-load power
  • Configurable shutdown and restart thresholds for battery protection
  • Connection for remote on/off control
  • Comprehensive protection functions against overload, short circuit, and overtemperature

Reliable power supply for 230-V loads

With 375 W of continuous power at 25 °C, the inverter supplies suitable 230 V devices from a 12 V battery system. For short-term loads, up to 450 W is available for ten seconds. The peak power of 600 W supports loads with a brief increase in power demand for up to two seconds. The output frequency can be set between 50 and 60 Hz. An automatic AC transfer switch is not integrated.

Monitoring and Configuration via VE.Direct

The VE.Direct interface enables monitoring of battery voltage, output voltage, load, as well as warnings and alarms. Important operating parameters can be configured via VictronConnect. This requires a separately available VE.Direct-to-USB interface or a VE.Direct Bluetooth Smart dongle, as Bluetooth is not built-in. Compatible GX devices or a GlobalLink 520 can also be integrated via an additional VE.Direct cable.

ECO Mode and Configurable Battery Protection

In ECO mode, the inverter switches to an energy-saving search mode when the load is low or absent, reducing the no-load power to 1 W. As soon as a sufficiently large load is detected, it resumes normal operation. The startup power and search behavior can be adjusted. Additionally, adjustable undervoltage thresholds and dynamic, load-dependent shutdown protect the connected battery system.

Installation and Integrated Protection Functions

The inverter is designed for dry, well-ventilated installation areas. To ensure adequate cooling, maintain approximately 10 cm of clearance around the unit. Integrated protection functions monitor, among other things, output short circuits, overloads, battery overvoltage and undervoltage, overtemperature, and excessive DC ripple voltage. Installation, grounding, and electrical configuration must be performed by a qualified electrician. The Schuko outlet must not be connected to an external AC power source.

Technical Specifications

Inverter and AC Output

  • Battery system voltage: 12 V DC
  • DC input voltage range: 9.2–17 V
  • Continuous power at 25 °C: 375 W
  • Continuous power at 40 °C: 300 W
  • Short-term power during cold start: 450 W for 10 seconds
  • Peak power: 600 W for 2 seconds
  • Output voltage: 230 V AC ± 3%
  • Output frequency: 50 or 60 Hz ± 0.1%, adjustable
  • Maximum efficiency: 86%
  • No-load power: 6 W
  • No-load power in ECO mode: 1 W
  • AC output: Schuko CEE 7/4

Battery protection and DC connection

  • Undervoltage shutdown, default value: 9.3 V
  • Restart and alarm threshold, default value: 10.9 V
  • Charged battery detection, default value: 14.0 V
  • Battery connection: Screw terminals
  • Maximum battery cable cross-sectional area: 10 mm²
  • Recommended cable cross-sectional area up to 1.5 m: 6 mm²
  • Recommended cable cross-section for 1.5–3 m: 10 mm²
  • Internal DC fuse: 2 × 40 A, 32 V, ATOF, non-replaceable
  • Protection functions: Short circuit, overload, battery overvoltage and undervoltage, overtemperature, AC voltage present at the output, and excessive DC ripple voltage

Communication and System Integration

  • Communication interface: VE.Direct
  • Bluetooth: not integrated; optional dongle required
  • Remote on/off connection: available
  • Automatic AC transfer switch: not built-in
  • Hardware generation: HW15

General Technical Specifications

  • Manufacturer part number: PIN121371210
  • Operating temperature: −40 to +65 °C
  • Power derating: 1.25% per °C above 40 °C
  • Relative humidity: maximum 95%, non-condensing
  • Protection rating: IP21 for base mounting, IP20 for approved wall mounting
  • Protection class: I
  • Housing: Steel with plastic cover
  • Color: Blue, RAL 5012
  • Dimensions: 86 × 165 × 260 mm
  • Weight: 3 kg
  • Safety standards: EN/IEC 60335-1 and EN/IEC 62109-1
  • EMC standards: EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, and IEC 61000-6-3

Package Contents

1 × Victron Energy Inverter 12/375 230V VE.Direct SCHUKO

Continuous output: 300 W
Frequency range: 50Hz / +-0.1Hz or 50Hz / +-0.1Hz (adjustable)
Humidity: max. 95 % RF (non-condensing)
Input voltage: 18,4 - 34V
Manufacturer: Victron Energy
Own consumption in idle mode: 5,2W
Own consumption in standby: 0,9W
Peak performance: 700W
Protection type: IP21
Rated output voltage: 230V AC / alternating current
Sine wave: true sine wave
Temperature range: -40°C bis 65°C
Voltage regulation: 12V DC / 230V AC
Weight: 3,41
ean: 8719076073499
mpn: PIN121371210

Manufactuerer Information

Victron Energy

Victron Energy B.V.
De Paal 35
1351 JG Almere
Netherlands

Mail: sales@victronenergy.com

Tel.: +31 365359700

Direkt zum Hersteller

Victron_Inverter_VE.Direct_250VA_1600VA_Datenblatt.pdf Download
Victron_Inverter_VE.Direct_250VA_1600VA_Benutzerhandbuch.pdf Download
1-67-025503
Loading products