Victron SmartSolar MPPT 150/100-MC4 charge controller VE.Can

The Smartsolar MPPT 150/100-MC4 from Victron Energy (MPN SCC115110511) is part of the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in partial shade are just two of the many highlights of this new device class. The devices in the 150/45tr to 150/100-MC4 classes are also available in a version with MC4 connectors on the solar side of the charge controller instead of screw terminals. In addition, this model can be operated in parallel with other controllers of the same type.

Compared to the BlueSolar series, the Bluetooth module is already integrated into the controller in the SmartSolar family, making the Smart Dongle unnecessary for this device. Another new feature is the optionally available LCD display, which can be easily attached to the SmartSolar 150/85-MC4 as needed. The display then provides all the important information about the controller. If required, the MPPT WireBox-XL MC4 from Victron Energy is the ideal addition to your SmartSolar charge controller. It securely covers the cable entries and connection terminals of the controller, protecting them from external influences and contact.

Key product features of the SmartSolar 150/100-MC4 100A 12V 24V 36V 48V MPPT

• Ultra-fast MPPT tracker of the latest generation ensures the best possible yield even when the sky is overcast
• Automatic detection of MPP voltage in partial shade ensures further yield improvement compared to "simple" MPPT charge controllers
• Integrated Bluetooth module for app-supported analysis and configuration of the controller (via free Victron app on compatible devices)
• Optional LCD display available
• Integrated VE.Direct data communication port for connection to the GX Color Control Panel or a Smart BMV battery monitor for communication with additional devices
• High maximum efficiency of 98%
• Parallel operation with other 150/100 controllers possible
• Adjustable constant charging voltage
• Adjustable float charge voltage
• Suitable for all AGM, GEL, lead-acid calcium-calcium, and lithium batteries
• Fully programmable charging algorithms that can be manually activated and switched later using a switch on the housing
• Max. nominal charging current 100A, 150V Maximum PV open-circuit voltage
• Max. PV power: 12V 1450W / 24V 2900W / 48V 5800W
• Max. PV input voltage: 150V
• Integrated protection against battery polarity reversal
• Multi-stage and adaptive charging algorithm
• Remote on/off switching possible via 2-pin connector
• IP 43 protection rating for electronic components and IP 22 protection rating for the controller connection area
• Integrated temperature sensor compensates for float and constant charging voltage according to temperature
• Day/night time control and light dimming option

Smart configuration and analysis via Victron Connect app

Modern Apple and Android smartphones, tablets, Macbooks, and other devices can be connected thanks to the integrated Bluetooth module and the free Victron Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time.

Smart data communication via VE.Direct and lightning-fast Bluetooth module

In the event of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP. However, this may not be the optimal MPP. The innovative algorithm of the SmartSolar controller will always maximize energy yield by adjusting to the optimal MPP.

High-speed MPP-MC4acker of the latest generation

Especially when the sky is overcast and the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Optional LCD display available for retrofitting

If you prefer to operate and configure the Smartsolar MPPT 150/100-MC4 directly, you can retrofit the Smartsolar Control SCC900600010 display. The display allows easy configuration of the controller via key input and also provides all important performance data at a glance.

Comprehensive electronic protection

• Protection against reverse battery connection
• PV reverse current block
• Protection against device overheating
• Protection against short circuits
• Protection against reverse polarity PV connection

The VE.Direct data communication port

VE.Direct in text mode transmits all important parameters to other devices connected to the charge controller every second, thus enabling communication with additional devices such as the GX Color Control system panel. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would incur excessive costs. You can find more information about VE.Direct in our Victron Energy brand shop.

Scope of delivery
1x Victron SCC115110511 SmartSolar MPPT 150/100-MC4 12V 24V 36V 48V 70A charge controller
1x User manual