BackUp-Kits
- Batteries
- Electronics
- Generators
- Installation
- Complete Systems
- Brands
Filter
–
BackUp-Kits
11 Results
Sorting
VAT-exempt delivery possible*
KfW eligible
More versions available
4-01-015805-001
Offgridtec Backup-Kit 3-phasig 7kWh mit Pylontech US3000C Akku Victron MultiPlus-II 48/5000
Die Backup-Systeme von Offgridtec sind ideal zur Notstromversorgung oder zur Erweiterung eines bestehenden Solarsystems geeignet. Die Systeme enthalten neben Lithium-Ionen Akkus von Pylontech, einen passenden MultiPlus-II Wechselrichter und einen Cerbo GX zur Systemüberwachung von Victron Energy. Damit kannst du deine Energieversorgung auch dann sicherstellen, wenn es zu einem Stromausfall kommt.
Dank der UPS-Funktion bleibt der MultiPlus auch bei einem Netzfehler eingeschaltet und übernimmt die Versorgung der angeschlossenen Verbraucher. Die Umschaltung geschieht so schnell (in weniger als 20 Millisekunden), dass ein unterbrechungsfreier Betrieb von Computern und anderen elektronischen Geräten gewährleistet werden kann.
Einsatzgebiete des Offgridtec Backup-Kits:
Notstromversorgung
Netzunabhängige Solarsysteme (Inselanlagen)
Nachrüstung bestehender PV-Anlagen
Netzgekoppelte Stromversorgung
USV-Anlagen
Was enthält das Offgridtec Backup-System?
Pylontech US3000C 3,5kWh LiFePO4 Akku (je nach Auswahl 2x, 4x oder 6x)
3x Victron MultiPlus-II 48/5000/70-50 230V Gerätekombination
2x Victron Lynx Distributor
1x Victron Cerbo GX Bedienpanel
1x Victron GX Touch 50 Anzeigepanel für Cerbo GX
1x Victron MK3-USB Ve.Bus zu USB Interface
1x 1,8m VE.Can zu Can-Bus BMS Typ A Kabel
2x 0,9m Victron RJ45 UTP Kabel
1x 3m Victron RJ45 UTP Kabel
3x 1m Offgridtec Batteriekabel 35mm² M8-Ösen
3x 200A 70V MEGA Sicherung
Pylontech Batterieanschlusskabelset (je nach Auswahl 1x oder 2x)
Erweiterte Nutzung deines Backup-Systems
Um ein ESS (Energy Storage System) mit dem Backup-System errichten zu können, wird jeweils ein Energiezähler mit Anschlusskabel benötigt:
Victron VM-3P75CT Energy Meter 3-phasiger Stromzähler 75A/phase
5m Victron RJ45 UTP Kabel
Mit diesem Stromzähler kannst du eine netzparallele Installation vornehmen und danach deinen Energieverbrauch überwachen, bzw. deine Energiekosten kontrollieren. Dank der Phasenkompensation könntest du sogar den 3-phasigen Zähler auch für 1-phasige Systeme nutzen. Damit sind nahtlose Integrationen von dezentralen Energiequellen und Verbrauchern in das bestehende Stromnetz kein Problem.
Damit ein ESS in der Vorkonfiguration berücksichtigt werden kann, muss der Zähler zwingend im Vorfeld bzw. zum System erworben werden!
Die Speicherlösung – Pylontech US3000C Akkus
Der US3000C Speicher ist ein Lithiumakku der neuesten Generation. Er wurde speziell für die hohen Ansprüche, die an Backup-Speicher gestellt werden, zu erfüllen. Dank hochmoderner Technologie sind höchste Sicherheit und eine lange Lebensdauer auch bei regelmäßiger tiefer Entladung garantiert.
Extrem zyklenfest – über 6000 Zyklen bei 95% DoD
Absolut eigensichere Lithiumtechnologie
Hohe Lade- und Entladeleistung möglich
Integriertes BMS
Sehr hohe Speicherdichte – geringes Gewicht und kompakte Bauweise
Absolut wartungsfrei und langlebig
Vorladefunktion zum Schutz des ESS-Systems vor Überspannungsfunktion
Der Elektronik-Kern – die Victron Multiplus-II Gerätekombination
Der Multiplus-II 48/5000/70-50 ist eine High-End Gerätekombination von Victron Energy (MPN PMP482505010) die klassische Multiplus-Komponenten mit einem externen Stromsensor und integrierter Anti-Islanding Funktion verbindet. Dadurch werden die Funktionen PowerControl und PowerAssist auf 100 A erweitert und der potenzielle Einsatzbereich auf ESS-Anwendungen ausgedehnt. Das Wechselrichter Modul leistet bei nicht linearer Belastung satte 5000 W, bzw. 4000 W bei linearer Dauerbelastung. Auch das 48 V Batterieladegerät ist mit 70 A Ladeleistung sehr gut proportioniert und wird durch einen 50 A Transferschalter ergänzt, mit dem sich blitzschnell zwischen den AC-Anschlüssen hin- und herschalten lässt.
wichtige Leistungsmerkmale des Multiplus-II 48/5000/70-50
PowerControl und PowerAssist –Steigerung von Netz-oder Generator-Leistung
eingebaute Anti-Islanding-Funktion und Anschlussmöglichkeit für externen Stromsensor (optional)
kann als Backupgerät in netzgekoppelten Anlagen eingesetzt für die Stromversorgung bei Netzausfällen
einsetzbar in verschiedenen ESS (Energy Storage System) Anwendungen
bestens geeignet für die professionelle Seefahrt, Yachten, Fahrzeuge und landgebundene, netzferne Anwendungen
VE.Bus Schnittstelle für Parallel-und Drei-Phasen-Betrieb, Fernüberwachung und Systemintegration
praktisch unbegrenzte Leistung durch Parallel-und Drei-Phasen-Betrieb
kann vor Ort oder aus der Ferne mittels VEConfigure Software konfiguriert werden
Immer genug Power dank PowerControl und PowerAssist
Am Multiplus-II 48/5000/70-50 kann ein maximaler Netz- oder Generatorstrom eingestellt werden. Das MultiPlus-II nimmt dann Rücksicht auf weitere angeschlossene Wechselstromverbraucher und nutzt zum Laden der Batterie nur den Strom, der noch „übrig“ ist. So wird verhindert, dass der Generator- oder der Netzanschluss überlastet wird (PowerControl-Funktion). Mit der Funktion PowerAssist erhält das PowerControl-Prinzip eine neue Dimension. Lastspitzen treten häufig nur für einen begrenzten Zeitraum auf. In einem solchen Fall kompensiert das MultiPlus-II zu schwache Generator-, Landstrom- bzw. Netzleistung sofort durch Energie aus der Batterie. Wird die Last reduziert, d. h. werden Verbraucher ausgeschaltet, kann die dann wieder ausreichend vorhandene Energie zum Laden der Batterien genutzt werden.
Maximale Flexibilität dank zweier Wechselstromausgänge
Der Hauptausgang stellt einen unterbrechungsfreien Betrieb sicher. Im Falle eines Netzausfalls oder bei einer Unterbrechung des Land-/Generatorstroms übernimmt das MultiPlus-II die Versorgung der angeschlossenen Verbraucher. Die Umschaltung geschieht so schnell (in weniger als 20 Millisekunden), dass ein unterbrechungsfreier Betrieb von Computern und anderen elektronischen Geräten gewährleistet ist. Der zweite Ausgang liefert nur dann Strom, wenn am Eingang des MultiPlus-II Wechselstrom verfügbar ist. Verbraucher, die die Batterie nicht entladen dürfen, wie z. B. ein Wassererhitzer, können an diesen Ausgang angeschlossen werden.
Konfiguration und Überwachung aus der Ferne
Installieren Sie ein Color Control GX oder andere GX-Produkte, um sich mit dem Internet zu verbinden. Die Betriebs-Daten lassen sich auf unserer VRM (Victron Remote Management) Website kostenlos speichern und einsehen. Sind Systeme an das Internet angeschlossen, kann auf sie aus der Ferne zugegriffen und Einstellungen können geändert werden.
Die Auslieferung des MultiPlus-II erfolgt standardmäßig unkonfiguriert. Sie finden hier im Downloadbereich die Konfigurations-Anleitung für das System. Sollten Sie eine Vorkonfiguration durch uns wünschen, können wir dies gern gegen Aufpreis für Sie übernehmen. Hierzu legen Sie den oben verlinkten Artikel "Offgridtec Vorkonfiguration" beim Bestellvorgang in den Warenkorb. Der Versand kann in diesem Fall 3-5 Werktage länger in Anspruch nehmen, bis die Konfiguration durchgeführt wurde.
Technische Merkmale
5000 W Leistung bei nicht linearer Belastung 4000 W Dauerbelastung und 9000 W Spitzenleistung
für 48 V Batteriespannung, 50 A Transfer-Schalter und 70 A Batterieladegerät
Ausgangsspannung: 230 VAC, Frequenz: 50 Hz
max. Wirkungsgrad liegt bei 95%, Schutzklasse IP22
Systemüberwachung mit dem Victron Cerbo GX und GX Toch Display
Mit der Cerbo GX Kommunikationszentrale können Sie Ihr System ganz einfach kontrollieren und überwachen. Die flexiblen Verbindungsmöglichkeiten maximieren Ihre Systemleistung. Die Kontrolle Ihrer Anlage ist dank des Cerbo GX ortsunabhängig möglich. Mit dem GX Touch 50 Display haben Sie alle Parameter Ihres Systems stets im Blick und können Änderungen einfach und schnell vornehmen.
Sicherheitshinweis: Lassen Sie dieses Komplettsystem nur von einer Elektrofachkraft installieren und in Betrieb nehmen.
Die Backup-Systeme von Offgridtec sind ideal zur Notstromversorgung oder zur Erweiterung eines bestehenden Solarsystems geeignet. Die Systeme enthalte...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
KfW eligible
Die Backup-Systeme von Offgridtec sind ideal zur Notstromversorgung oder zur Erweiterung eines bestehenden Solarsystems geeignet. Die Systeme enthalten neben Lithium-Ionen Akkus von Pylontech, einen passenden MultiPlus-II Wechselrichter und einen Cerbo GX zur Systemüberwachung von Victron Energy. Damit kannst du deine Energieversorgung auch dann sicherstellen, wenn es zu einem Stromausfall kommt.
Dank der UPS-Funktion bleibt der MultiPlus auch bei einem Netzfehler eingeschaltet und übernimmt die Versorgung der angeschlossenen Verbraucher. Die Umschaltung geschieht so schnell (in weniger als 20 Millisekunden), dass ein unterbrechungsfreier Betrieb von Computern und anderen elektronischen Geräten gewährleistet werden kann.
Einsatzgebiete des Offgridtec Backup-Kits:
Notstromversorgung
Netzunabhängige Solarsysteme (Inselanlagen)
Nachrüstung bestehender PV-Anlagen
Netzgekoppelte Stromversorgung
USV-Anlagen
Was enthält das Offgridtec Backup-System?
Pylontech US3000C 3,5kWh LiFePO4 Akku (je nach Auswahl 2x, 4x oder 6x)
3x Victron MultiPlus-II 48/5000/70-50 230V Gerätekombination
2x Victron Lynx Distributor
1x Victron Cerbo GX Bedienpanel
1x Victron GX Touch 50 Anzeigepanel für Cerbo GX
1x Victron MK3-USB Ve.Bus zu USB Interface
1x 1,8m VE.Can zu Can-Bus BMS Typ A Kabel
2x 0,9m Victron RJ45 UTP Kabel
1x 3m Victron RJ45 UTP Kabel
3x 1m Offgridtec Batteriekabel 35mm² M8-Ösen
3x 200A 70V MEGA Sicherung
Pylontech Batterieanschlusskabelset (je nach Auswahl 1x oder 2x)
Erweiterte Nutzung deines Backup-Systems
Um ein ESS (Energy Storage System) mit dem Backup-System errichten zu können, wird jeweils ein Energiezähler mit Anschlusskabel benötigt:
Victron VM-3P75CT Energy Meter 3-phasiger Stromzähler 75A/phase
5m Victron RJ45 UTP Kabel
Mit diesem Stromzähler kannst du eine netzparallele Installation vornehmen und danach deinen Energieverbrauch überwachen, bzw. deine Energiekosten kontrollieren. Dank der Phasenkompensation könntest du sogar den 3-phasigen Zähler auch für 1-phasige Systeme nutzen. Damit sind nahtlose Integrationen von dezentralen Energiequellen und Verbrauchern in das bestehende Stromnetz kein Problem.
Damit ein ESS in der Vorkonfiguration berücksichtigt werden kann, muss der Zähler zwingend im Vorfeld bzw. zum System erworben werden!
Die Speicherlösung – Pylontech US3000C Akkus
Der US3000C Speicher ist ein Lithiumakku der neuesten Generation. Er wurde speziell für die hohen Ansprüche, die an Backup-Speicher gestellt werden, zu erfüllen. Dank hochmoderner Technologie sind höchste Sicherheit und eine lange Lebensdauer auch bei regelmäßiger tiefer Entladung garantiert.
Extrem zyklenfest – über 6000 Zyklen bei 95% DoD
Absolut eigensichere Lithiumtechnologie
Hohe Lade- und Entladeleistung möglich
Integriertes BMS
Sehr hohe Speicherdichte – geringes Gewicht und kompakte Bauweise
Absolut wartungsfrei und langlebig
Vorladefunktion zum Schutz des ESS-Systems vor Überspannungsfunktion
Der Elektronik-Kern – die Victron Multiplus-II Gerätekombination
Der Multiplus-II 48/5000/70-50 ist eine High-End Gerätekombination von Victron Energy (MPN PMP482505010) die klassische Multiplus-Komponenten mit einem externen Stromsensor und integrierter Anti-Islanding Funktion verbindet. Dadurch werden die Funktionen PowerControl und PowerAssist auf 100 A erweitert und der potenzielle Einsatzbereich auf ESS-Anwendungen ausgedehnt. Das Wechselrichter Modul leistet bei nicht linearer Belastung satte 5000 W, bzw. 4000 W bei linearer Dauerbelastung. Auch das 48 V Batterieladegerät ist mit 70 A Ladeleistung sehr gut proportioniert und wird durch einen 50 A Transferschalter ergänzt, mit dem sich blitzschnell zwischen den AC-Anschlüssen hin- und herschalten lässt.
wichtige Leistungsmerkmale des Multiplus-II 48/5000/70-50
PowerControl und PowerAssist –Steigerung von Netz-oder Generator-Leistung
eingebaute Anti-Islanding-Funktion und Anschlussmöglichkeit für externen Stromsensor (optional)
kann als Backupgerät in netzgekoppelten Anlagen eingesetzt für die Stromversorgung bei Netzausfällen
einsetzbar in verschiedenen ESS (Energy Storage System) Anwendungen
bestens geeignet für die professionelle Seefahrt, Yachten, Fahrzeuge und landgebundene, netzferne Anwendungen
VE.Bus Schnittstelle für Parallel-und Drei-Phasen-Betrieb, Fernüberwachung und Systemintegration
praktisch unbegrenzte Leistung durch Parallel-und Drei-Phasen-Betrieb
kann vor Ort oder aus der Ferne mittels VEConfigure Software konfiguriert werden
Immer genug Power dank PowerControl und PowerAssist
Am Multiplus-II 48/5000/70-50 kann ein maximaler Netz- oder Generatorstrom eingestellt werden. Das MultiPlus-II nimmt dann Rücksicht auf weitere angeschlossene Wechselstromverbraucher und nutzt zum Laden der Batterie nur den Strom, der noch „übrig“ ist. So wird verhindert, dass der Generator- oder der Netzanschluss überlastet wird (PowerControl-Funktion). Mit der Funktion PowerAssist erhält das PowerControl-Prinzip eine neue Dimension. Lastspitzen treten häufig nur für einen begrenzten Zeitraum auf. In einem solchen Fall kompensiert das MultiPlus-II zu schwache Generator-, Landstrom- bzw. Netzleistung sofort durch Energie aus der Batterie. Wird die Last reduziert, d. h. werden Verbraucher ausgeschaltet, kann die dann wieder ausreichend vorhandene Energie zum Laden der Batterien genutzt werden.
Maximale Flexibilität dank zweier Wechselstromausgänge
Der Hauptausgang stellt einen unterbrechungsfreien Betrieb sicher. Im Falle eines Netzausfalls oder bei einer Unterbrechung des Land-/Generatorstroms übernimmt das MultiPlus-II die Versorgung der angeschlossenen Verbraucher. Die Umschaltung geschieht so schnell (in weniger als 20 Millisekunden), dass ein unterbrechungsfreier Betrieb von Computern und anderen elektronischen Geräten gewährleistet ist. Der zweite Ausgang liefert nur dann Strom, wenn am Eingang des MultiPlus-II Wechselstrom verfügbar ist. Verbraucher, die die Batterie nicht entladen dürfen, wie z. B. ein Wassererhitzer, können an diesen Ausgang angeschlossen werden.
Konfiguration und Überwachung aus der Ferne
Installieren Sie ein Color Control GX oder andere GX-Produkte, um sich mit dem Internet zu verbinden. Die Betriebs-Daten lassen sich auf unserer VRM (Victron Remote Management) Website kostenlos speichern und einsehen. Sind Systeme an das Internet angeschlossen, kann auf sie aus der Ferne zugegriffen und Einstellungen können geändert werden.
Die Auslieferung des MultiPlus-II erfolgt standardmäßig unkonfiguriert. Sie finden hier im Downloadbereich die Konfigurations-Anleitung für das System. Sollten Sie eine Vorkonfiguration durch uns wünschen, können wir dies gern gegen Aufpreis für Sie übernehmen. Hierzu legen Sie den oben verlinkten Artikel "Offgridtec Vorkonfiguration" beim Bestellvorgang in den Warenkorb. Der Versand kann in diesem Fall 3-5 Werktage länger in Anspruch nehmen, bis die Konfiguration durchgeführt wurde.
Technische Merkmale
5000 W Leistung bei nicht linearer Belastung 4000 W Dauerbelastung und 9000 W Spitzenleistung
für 48 V Batteriespannung, 50 A Transfer-Schalter und 70 A Batterieladegerät
Ausgangsspannung: 230 VAC, Frequenz: 50 Hz
max. Wirkungsgrad liegt bei 95%, Schutzklasse IP22
Systemüberwachung mit dem Victron Cerbo GX und GX Toch Display
Mit der Cerbo GX Kommunikationszentrale können Sie Ihr System ganz einfach kontrollieren und überwachen. Die flexiblen Verbindungsmöglichkeiten maximieren Ihre Systemleistung. Die Kontrolle Ihrer Anlage ist dank des Cerbo GX ortsunabhängig möglich. Mit dem GX Touch 50 Display haben Sie alle Parameter Ihres Systems stets im Blick und können Änderungen einfach und schnell vornehmen.
Sicherheitshinweis: Lassen Sie dieses Komplettsystem nur von einer Elektrofachkraft installieren und in Betrieb nehmen.
Shipped in 2-5 days
More versions available
VAT-exempt delivery possible*
KfW eligible
More versions available
4-01-015810-001
Offgridtec Backup-Kit 3-phasig 19,2kWh mit Pylontech US5000 Akku Victron MultiPlus-II 48/8000
Die Backup-Systeme von Offgridtec sind ideal zur Notstromversorgung oder zur Erweiterung eines bestehenden Solarsystems geeignet. Die Systeme enthalten neben Lithium-Ionen Akkus von Pylontech, einen passenden MultiPlus-II Wechselrichter und einen Cerbo GX zur Systemüberwachung. Damit kannst du deine Energieversorgung auch dann sicherstellen, wenn es zu einem Stromausfall kommt.
Dank der UPS-Funktion bleibt der MultiPlus auch bei einem Netzfehler eingeschaltet und übernimmt die Versorgung der angeschlossenen Verbraucher. Die Umschaltung geschieht so schnell (in weniger als 20 Millisekunden), dass ein unterbrechungsfreier Betrieb von Computern und anderen elektronischen Geräten gewährleistet werden kann.
Einsatzgebiete des Offgridtec Backup-Kits:
Notstromversorgung
Netzunabhängige Solarsysteme (Inselanlagen)
Nachrüstung bestehender PV-Anlagen
Netzgekoppelte Stromversorgung
USV-Anlagen
Was enthält das Offgridtec Backup-System?
Pylontech US5000C 3,5kWh LiFePO4 Akku (je nach Auswahl 4x, 6x oder 8x)
3x MultiPlus-II 48/8000/110-100/100 230V Gerätekombination
2x Victron Lynx Distributor
1x Victron Cerbo GX Bedienpanel
1x Victron GX Touch 50 Anzeigepanel für Cerbo GX
1x Victron MK3-USB Ve.Bus zu USB Interface
1x 1,8m VE.Can zu Can-Bus BMS Typ A Kabel
2x 0,9m Victron RJ45 UTP Kabel
1x 3m Victron RJ45 UTP Kabel
6x 1m Offgridtec Batteriekabel 35mm² M8-Ösen
6x 200A 70V MEGA Sicherung
2x Pylontech Batterieanschlusskabelset
Erweiterte Nutzung deines Backup-Systems
Um ein ESS (Energy Storage System) mit dem Backup-System errichten zu können, wird jeweils ein Energiezähler mit Anschlusskabel benötigt:
Victron VM-3P75CT Energy Meter 3-phasiger Stromzähler 75A/phase
5m Victron RJ45 UTP Kabel
Mit diesem Stromzähler kannst du eine netzparallele Installation vornehmen und danach deinen Energieverbrauch überwachen, bzw. deine Energiekosten kontrollieren. Dank der Phasenkompensation könntest du sogar den 3-phasigen Zähler auch für 1-phasige Systeme nutzen. Damit sind nahtlose Integrationen von dezentralen Energiequellen und Verbrauchern in das bestehende Stromnetz kein Problem.
Damit ein ESS in der Vorkonfiguration berücksichtigt werden kann, muss der Zähler zwingend im Vorfeld bzw. zum System erworben werden!
Die Speicherlösung – Pylontech US5000C Akkus
Der US3000C Speicher ist ein Lithiumakku der neuesten Generation. Er wurde speziell für die hohen Ansprüche, die an Backup-Speicher gestellt werden, zu erfüllen. Dank hochmoderner Technologie sind höchste Sicherheit und eine lange Lebensdauer auch bei regelmäßiger tiefer Entladung garantiert.
Extrem zyklenfest – über 6000 Zyklen bei 95% DoD
Absolut eigensichere Lithiumtechnologie
Hohe Lade- und Entladeleistung möglich
Integriertes BMS
Sehr hohe Speicherdichte – geringes Gewicht und kompakte Bauweise
Absolut wartungsfrei und langlebig
Vorladefunktion zum Schutz des ESS-Systems vor Überspannungsfunktion
Der Elektronik-Kern – die Victron Multiplus-II Gerätekombination
Der Multiplus-II ist eine High-End Gerätekombination von Victron Energy, bestehend aus 48V Batterieladegerät, Wechselrichter und Transfer-Schalter. Diese Kombination verbindet die klassischen Multiplus-Komponenten mit einem externen Stromsensor und integrierter Anti-Island-Funktion. Dadurch werden die Funktionen PowerControl und PowerAssist auf 50A erweitert und der potenzielle Einsatzbereich auf Energy-Storage-System Anwendungen ausgedehnt. Der Multiplus kann daher ideal als Backupgerät in netzgekoppelten und -unabhängigen Anlagen für die Stromversorgung eingesetzt werden.
8000 W Leistung bei nicht linearer Belastung 6400 W Dauerbelastung und 15000 W Spitzenleistung
für 48V Batteriespannung
100A Transferschalter
110A Batterieladegerät
Ausgangsspannung: 230 VAC, Frequenz: 50 Hz
max. Wirkungsgrad: 95%
Schutzklasse: IP22
Konfiguration
Die Auslieferung des MultiPlus-II erfolgt standardmäßig unkonfiguriert. Sie finden hier im Downloadbereich die Konfigurations-Anleitung für das System. Sollten Sie eine Vorkonfiguration durch uns wünschen, können wir dies gern gegen Aufpreis für Sie übernehmen. Hierzu legen Sie den oben verlinkten Artikel "Offgridtec Vorkonfiguration" beim Bestellvorgang in den Warenkorb. Der Versand kann in diesem Fall 3-5 Werktage länger in Anspruch nehmen, bis die Konfiguration durchgeführt wurde.
Systemüberwachung mit dem Victron Cerbo GX und GX Toch Display
Mit der Cerbo GX Kommunikationszentrale können Sie Ihr System ganz einfach kontrollieren und überwachen. Die flexiblen Verbindungsmöglichkeiten maximieren Ihre Systemleistung. Die Kontrolle Ihrer Anlage ist dank des Cerbo GX ortsunabhängig möglich. Mit dem GX Touch 50 Display haben Sie alle Parameter Ihres Systems stets im Blick und können Änderungen einfach und schnell vornehmen.
Sicherheitshinweis: Lassen Sie dieses Komplettsystem nur von einer Elektrofachkraft installieren und in Betrieb nehmen.
Die Backup-Systeme von Offgridtec sind ideal zur Notstromversorgung oder zur Erweiterung eines bestehenden Solarsystems geeignet. Die Systeme enthalte...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
KfW eligible
Die Backup-Systeme von Offgridtec sind ideal zur Notstromversorgung oder zur Erweiterung eines bestehenden Solarsystems geeignet. Die Systeme enthalten neben Lithium-Ionen Akkus von Pylontech, einen passenden MultiPlus-II Wechselrichter und einen Cerbo GX zur Systemüberwachung. Damit kannst du deine Energieversorgung auch dann sicherstellen, wenn es zu einem Stromausfall kommt.
Dank der UPS-Funktion bleibt der MultiPlus auch bei einem Netzfehler eingeschaltet und übernimmt die Versorgung der angeschlossenen Verbraucher. Die Umschaltung geschieht so schnell (in weniger als 20 Millisekunden), dass ein unterbrechungsfreier Betrieb von Computern und anderen elektronischen Geräten gewährleistet werden kann.
Einsatzgebiete des Offgridtec Backup-Kits:
Notstromversorgung
Netzunabhängige Solarsysteme (Inselanlagen)
Nachrüstung bestehender PV-Anlagen
Netzgekoppelte Stromversorgung
USV-Anlagen
Was enthält das Offgridtec Backup-System?
Pylontech US5000C 3,5kWh LiFePO4 Akku (je nach Auswahl 4x, 6x oder 8x)
3x MultiPlus-II 48/8000/110-100/100 230V Gerätekombination
2x Victron Lynx Distributor
1x Victron Cerbo GX Bedienpanel
1x Victron GX Touch 50 Anzeigepanel für Cerbo GX
1x Victron MK3-USB Ve.Bus zu USB Interface
1x 1,8m VE.Can zu Can-Bus BMS Typ A Kabel
2x 0,9m Victron RJ45 UTP Kabel
1x 3m Victron RJ45 UTP Kabel
6x 1m Offgridtec Batteriekabel 35mm² M8-Ösen
6x 200A 70V MEGA Sicherung
2x Pylontech Batterieanschlusskabelset
Erweiterte Nutzung deines Backup-Systems
Um ein ESS (Energy Storage System) mit dem Backup-System errichten zu können, wird jeweils ein Energiezähler mit Anschlusskabel benötigt:
Victron VM-3P75CT Energy Meter 3-phasiger Stromzähler 75A/phase
5m Victron RJ45 UTP Kabel
Mit diesem Stromzähler kannst du eine netzparallele Installation vornehmen und danach deinen Energieverbrauch überwachen, bzw. deine Energiekosten kontrollieren. Dank der Phasenkompensation könntest du sogar den 3-phasigen Zähler auch für 1-phasige Systeme nutzen. Damit sind nahtlose Integrationen von dezentralen Energiequellen und Verbrauchern in das bestehende Stromnetz kein Problem.
Damit ein ESS in der Vorkonfiguration berücksichtigt werden kann, muss der Zähler zwingend im Vorfeld bzw. zum System erworben werden!
Die Speicherlösung – Pylontech US5000C Akkus
Der US3000C Speicher ist ein Lithiumakku der neuesten Generation. Er wurde speziell für die hohen Ansprüche, die an Backup-Speicher gestellt werden, zu erfüllen. Dank hochmoderner Technologie sind höchste Sicherheit und eine lange Lebensdauer auch bei regelmäßiger tiefer Entladung garantiert.
Extrem zyklenfest – über 6000 Zyklen bei 95% DoD
Absolut eigensichere Lithiumtechnologie
Hohe Lade- und Entladeleistung möglich
Integriertes BMS
Sehr hohe Speicherdichte – geringes Gewicht und kompakte Bauweise
Absolut wartungsfrei und langlebig
Vorladefunktion zum Schutz des ESS-Systems vor Überspannungsfunktion
Der Elektronik-Kern – die Victron Multiplus-II Gerätekombination
Der Multiplus-II ist eine High-End Gerätekombination von Victron Energy, bestehend aus 48V Batterieladegerät, Wechselrichter und Transfer-Schalter. Diese Kombination verbindet die klassischen Multiplus-Komponenten mit einem externen Stromsensor und integrierter Anti-Island-Funktion. Dadurch werden die Funktionen PowerControl und PowerAssist auf 50A erweitert und der potenzielle Einsatzbereich auf Energy-Storage-System Anwendungen ausgedehnt. Der Multiplus kann daher ideal als Backupgerät in netzgekoppelten und -unabhängigen Anlagen für die Stromversorgung eingesetzt werden.
8000 W Leistung bei nicht linearer Belastung 6400 W Dauerbelastung und 15000 W Spitzenleistung
für 48V Batteriespannung
100A Transferschalter
110A Batterieladegerät
Ausgangsspannung: 230 VAC, Frequenz: 50 Hz
max. Wirkungsgrad: 95%
Schutzklasse: IP22
Konfiguration
Die Auslieferung des MultiPlus-II erfolgt standardmäßig unkonfiguriert. Sie finden hier im Downloadbereich die Konfigurations-Anleitung für das System. Sollten Sie eine Vorkonfiguration durch uns wünschen, können wir dies gern gegen Aufpreis für Sie übernehmen. Hierzu legen Sie den oben verlinkten Artikel "Offgridtec Vorkonfiguration" beim Bestellvorgang in den Warenkorb. Der Versand kann in diesem Fall 3-5 Werktage länger in Anspruch nehmen, bis die Konfiguration durchgeführt wurde.
Systemüberwachung mit dem Victron Cerbo GX und GX Toch Display
Mit der Cerbo GX Kommunikationszentrale können Sie Ihr System ganz einfach kontrollieren und überwachen. Die flexiblen Verbindungsmöglichkeiten maximieren Ihre Systemleistung. Die Kontrolle Ihrer Anlage ist dank des Cerbo GX ortsunabhängig möglich. Mit dem GX Touch 50 Display haben Sie alle Parameter Ihres Systems stets im Blick und können Änderungen einfach und schnell vornehmen.
Sicherheitshinweis: Lassen Sie dieses Komplettsystem nur von einer Elektrofachkraft installieren und in Betrieb nehmen.
Shipped in 2-5 days
More versions available
VAT-exempt delivery possible*
KfW eligible
More versions available
4-01-015800-001
Offgridtec Backup kit 3-phase 4.8kWh with Pylontech us2000c battery Victron MultiPlus ii 48/3000
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontecha suitable MultiPlus-II invertera and a Cerbo gx for system monitoring from Victron Energy. This allows you to secure your energy supply even in the event of a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a power failure and takes over the supply to the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Areas of application for the Offgridtec backup kit:
Emergency power supply
Off-grid solar systems (stand-alone systems)
Retrofitting existing PV systems
Grid-connected power supply
UPS systems
What does the 3-phase Offgridtec backup system contain?
Pylontech us2000c 2.4kWh LiFePO4 battery (2x or 4x depending on selection)
3x Victron MultiPlus-II 48/3000/35-32 230v device combination
2x Victron Lynx Distributor
1x Victron Cerbo gx control panel
1x Victron gx Touch 50 display panel for Cerbo gx
1x Victron mk3-usb Ve.Bus to usb Interface
1x 1.8m VE.Can to Can-Bus bms type A cable
2x 0.9m Victron rj45 utp cable
1x 3m Victron rj45 utp cable
3x 1m Offgridtec Battery cable 35mm² M8 eyelets
3x 125A 70v mega fuse
Pylontech Battery connection cable set (depending on selection 1x or 2x)
Extended use of your backup system
To set up an ess (Energy Storage System) with the backup system, an energy meter with connection cable is required:
Victron vm-3p75ct Energy Meter 3-phase electricity meter 75A/phase
5m Victron rj45 utp cable
With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.
In order for an ess to be included in the pre-configuration, the meter must be purchased in advance or for the system!
The storage solution - Pylontech us2000c batteries
The us2000c storage system is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage systems. Thanks to state-of-the-art technology, maximum safety and a long service life are guaranteed even with regular deep discharges.
Extremely cycle-resistant - over 6000 cycles at 95% DoD
Absolutely intrinsically safe lithium technology
High charging and discharging capacity possible
Integrated bms
Very high storage density - low weight and compact design
Absolutely maintenance-free and durable
Pre-charge function to protect the ess system from overvoltage
The electronic core - the Victron Multiplus-II device combination
The Multiplus-II is a high-end device combination from Victron Energy, consisting of a 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-island function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid power supply systems.
3000W power with non-linear load - 2400w continuous load - 6000w peak power
for 48v battery voltage
32A transfer switch
35A battery charger
Output voltage: 230 vac, frequency: 50 Hz
max. efficiency: 95
Protection class: IP22
Configuration
The MultiPlus-II is delivered unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system for you, we can do this for you for an additional charge. To do this, add the article linked above "Offgridtec Pre-configuration" to the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed.
System monitoring with the Victron Cerbo gx and gx Toch display
With the Cerbo gx communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo gx, you can control your system from anywhere. With the gx Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily.
Safety note: Only have this complete system installed and commissioned by a qualified electrician.
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batterie...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
KfW eligible
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontecha suitable MultiPlus-II invertera and a Cerbo gx for system monitoring from Victron Energy. This allows you to secure your energy supply even in the event of a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a power failure and takes over the supply to the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Areas of application for the Offgridtec backup kit:
Emergency power supply
Off-grid solar systems (stand-alone systems)
Retrofitting existing PV systems
Grid-connected power supply
UPS systems
What does the 3-phase Offgridtec backup system contain?
Pylontech us2000c 2.4kWh LiFePO4 battery (2x or 4x depending on selection)
3x Victron MultiPlus-II 48/3000/35-32 230v device combination
2x Victron Lynx Distributor
1x Victron Cerbo gx control panel
1x Victron gx Touch 50 display panel for Cerbo gx
1x Victron mk3-usb Ve.Bus to usb Interface
1x 1.8m VE.Can to Can-Bus bms type A cable
2x 0.9m Victron rj45 utp cable
1x 3m Victron rj45 utp cable
3x 1m Offgridtec Battery cable 35mm² M8 eyelets
3x 125A 70v mega fuse
Pylontech Battery connection cable set (depending on selection 1x or 2x)
Extended use of your backup system
To set up an ess (Energy Storage System) with the backup system, an energy meter with connection cable is required:
Victron vm-3p75ct Energy Meter 3-phase electricity meter 75A/phase
5m Victron rj45 utp cable
With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.
In order for an ess to be included in the pre-configuration, the meter must be purchased in advance or for the system!
The storage solution - Pylontech us2000c batteries
The us2000c storage system is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage systems. Thanks to state-of-the-art technology, maximum safety and a long service life are guaranteed even with regular deep discharges.
Extremely cycle-resistant - over 6000 cycles at 95% DoD
Absolutely intrinsically safe lithium technology
High charging and discharging capacity possible
Integrated bms
Very high storage density - low weight and compact design
Absolutely maintenance-free and durable
Pre-charge function to protect the ess system from overvoltage
The electronic core - the Victron Multiplus-II device combination
The Multiplus-II is a high-end device combination from Victron Energy, consisting of a 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-island function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid power supply systems.
3000W power with non-linear load - 2400w continuous load - 6000w peak power
for 48v battery voltage
32A transfer switch
35A battery charger
Output voltage: 230 vac, frequency: 50 Hz
max. efficiency: 95
Protection class: IP22
Configuration
The MultiPlus-II is delivered unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system for you, we can do this for you for an additional charge. To do this, add the article linked above "Offgridtec Pre-configuration" to the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed.
System monitoring with the Victron Cerbo gx and gx Toch display
With the Cerbo gx communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo gx, you can control your system from anywhere. With the gx Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily.
Safety note: Only have this complete system installed and commissioned by a qualified electrician.
Shipped in 2-5 days
More versions available
VAT-exempt delivery possible*
KfW eligible
More versions available
4-01-013720-001
Backup system with 2.4KkWh Pylontech LiFePo4 storage and MultiPlus ii 48/3000 Victron Energy inverter 1-Phase
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a matching MultiPlus-II inverter and a Cerbo gx from Victron Energy for system monitoring. This allows you to secure your energy supply even if there is a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply of the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Areas of application of the Offgridtec backup kit:
Emergency power supply
Off-grid solar systems (stand-alone systems)
Retrofitting of existing PV systems
Grid-connected power supply
UPS systems
What does the Offgridtec backup system contain?
Pylontech us2000c 2.4kWh LiFePO4 battery (2x or 4x depending on selection)
1x Victron MultiPlus-II 48/3000/35-32 230v device combination
1x Victron Lynx Distributor
1x Victron Cerbo gx control panel
1x Victron gx Touch 50 display panel for Cerbo gx
1x 1,8m VE.Can to Can-Bus bms type A cable
1x 3m Victron rj45 utp cable
1x 1m Offgridtec battery cable 50mm² M8 eyelets
1x 125a 70v mega fuse
1x Pylontech battery connection cable set
The Multiplus device combination is pre-configured to fit the Pylontech batteries.
Extended use of your backup system
To establish an ESS (Energy Storage System) with the backup system, an energy meter with connection cable is required for each:
• Victron VM-3P75CT Energy Meter 3-phase electricity meter 75A/phase
• 5m Victron RJ45 UTP Cable
With this electricity meter, you can perform a grid-parallel installation and then monitor your energy consumption or control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for 1-phase systems. This enables seamless integration of decentralized energy sources and consumers into the existing power grid.
To ensure that an ESS can be considered in the pre-configuration, the meter must be purchased in advance or as part of the system!
The storage solution - Pylontech us2000c batteries
The us2000c storage is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage. Thanks to state-of-the-art technology, the highest level of safety and a long service life are guaranteed, even with regular deep discharge.
Extremely cycle resistant - over 6000 cycles at 95% DoD
Absolutely intrinsically safe lithium technology
High charge and discharge capacity possible
Integrated bms
Very high storage density - low weight and compact design
Absolutely maintenance-free and durable
Pre-charge function to protect the ESS system from overvoltage function
The electronics core - the Victron Multiplus-II device combination
The Multiplus-II is a high-end device combination from Victron Energy, consisting of 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus can therefore be ideally used as a backup device in grid-connected and grid-independent power supply systems.
3000W non-linear load power - 2400w continuous load - 6000w peak power
for 48v battery voltage
32A transfer switch
35A battery charger
Output voltage: 230 vac, frequency: 50 Hz
max. efficiency: 95%
Protection class: IP22
System monitoring with the Victron Cerbo gx and gx Toch display
Easily control and monitor your system with the Cerbo gx communication center. The flexible connectivity options maximize your system performance. Control of your system is possible regardless of location thanks to the Cerbo gx. With the gx Touch 50 display, you always have all the parameters of your system in view and can make changes easily and quickly.
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batterie...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
KfW eligible
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a matching MultiPlus-II inverter and a Cerbo gx from Victron Energy for system monitoring. This allows you to secure your energy supply even if there is a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply of the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Areas of application of the Offgridtec backup kit:
Emergency power supply
Off-grid solar systems (stand-alone systems)
Retrofitting of existing PV systems
Grid-connected power supply
UPS systems
What does the Offgridtec backup system contain?
Pylontech us2000c 2.4kWh LiFePO4 battery (2x or 4x depending on selection)
1x Victron MultiPlus-II 48/3000/35-32 230v device combination
1x Victron Lynx Distributor
1x Victron Cerbo gx control panel
1x Victron gx Touch 50 display panel for Cerbo gx
1x 1,8m VE.Can to Can-Bus bms type A cable
1x 3m Victron rj45 utp cable
1x 1m Offgridtec battery cable 50mm² M8 eyelets
1x 125a 70v mega fuse
1x Pylontech battery connection cable set
The Multiplus device combination is pre-configured to fit the Pylontech batteries.
Extended use of your backup system
To establish an ESS (Energy Storage System) with the backup system, an energy meter with connection cable is required for each:
• Victron VM-3P75CT Energy Meter 3-phase electricity meter 75A/phase
• 5m Victron RJ45 UTP Cable
With this electricity meter, you can perform a grid-parallel installation and then monitor your energy consumption or control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for 1-phase systems. This enables seamless integration of decentralized energy sources and consumers into the existing power grid.
To ensure that an ESS can be considered in the pre-configuration, the meter must be purchased in advance or as part of the system!
The storage solution - Pylontech us2000c batteries
The us2000c storage is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage. Thanks to state-of-the-art technology, the highest level of safety and a long service life are guaranteed, even with regular deep discharge.
Extremely cycle resistant - over 6000 cycles at 95% DoD
Absolutely intrinsically safe lithium technology
High charge and discharge capacity possible
Integrated bms
Very high storage density - low weight and compact design
Absolutely maintenance-free and durable
Pre-charge function to protect the ESS system from overvoltage function
The electronics core - the Victron Multiplus-II device combination
The Multiplus-II is a high-end device combination from Victron Energy, consisting of 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus can therefore be ideally used as a backup device in grid-connected and grid-independent power supply systems.
3000W non-linear load power - 2400w continuous load - 6000w peak power
for 48v battery voltage
32A transfer switch
35A battery charger
Output voltage: 230 vac, frequency: 50 Hz
max. efficiency: 95%
Protection class: IP22
System monitoring with the Victron Cerbo gx and gx Toch display
Easily control and monitor your system with the Cerbo gx communication center. The flexible connectivity options maximize your system performance. Control of your system is possible regardless of location thanks to the Cerbo gx. With the gx Touch 50 display, you always have all the parameters of your system in view and can make changes easily and quickly.
Shipped in 2-5 days
More versions available
VAT-exempt delivery possible*
KfW eligible
More versions available
4-01-013725-001
Backup system with 3.5kWh Pylontech LiFePo4 storage and MultiPlus ii 48/5000 Victron Energy inverter 1-phase
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a matching MultiPlus-II inverter and a Cerbo gx from Victron Energy for system monitoring. This allows you to secure your energy supply even if there is a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply of the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Areas of application of the Offgridtec backup kit:
Emergency power supply
Off-grid solar systems (stand-alone systems)
Retrofitting of existing PV systems
Grid-connected power supply
UPS systems
What does the Offgridtec backup system contain?
Pylontech us3000c 3.5kWh LiFePO4 battery (2x or 4x depending on selection)
1x Victron MultiPlus-II 48/5000/70-50 230v device combination
1x Victron Lynx Distributor
1x Victron Cerbo gx control panel
1x Victron gx Touch 50 display panel for Cerbo gx
1x 1,8m VE.Can to Can-Bus bms type A cable
1x 3m Victron rj45 utp cable
1x 1m Offgridtec battery cable 50mm² M8 eyelets
1x 200A 70v mega fuse
1x Pylontech battery connection cable set
The Multiplus device combination is pre-configured to fit the Pylontech batteries.
Extended use of your backup system
To establish an ESS (Energy Storage System) with the backup system, an energy meter with connection cable is required for each:
• Victron VM-3P75CT Energy Meter 3-phase electricity meter 75A/phase
• 5m Victron RJ45 UTP Cable
With this electricity meter, you can perform a grid-parallel installation and then monitor your energy consumption or control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for 1-phase systems. This enables seamless integration of decentralized energy sources and consumers into the existing power grid.
To ensure that an ESS can be considered in the pre-configuration, the meter must be purchased in advance or as part of the system!
The storage solution - Pylontech us3000c batteries
The us3000c storage is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage. Thanks to advanced technology, the highest safety and long life are guaranteed even with regular deep discharge.
Extremely cycle resistant - over 6000 cycles at 95% DoD
Absolutely intrinsically safe lithium technology
High charge and discharge capacity possible
Integrated bms
Very high storage density - low weight and compact design
Absolutely maintenance-free and durable
Pre-charge function to protect the ESS system from overvoltage function
The electronics core - the Victron Multiplus-II device combination
The Multiplus-II is a high-end device combination from Victron Energy, consisting of 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus can therefore be ideally used as a backup device in grid-connected and grid-independent power supply systems.
5000W non-linear load power - 4000w continuous load - 9000w peak power
for 48v battery voltage
50a transfer switch
70A battery charger
Output voltage: 230 vac, frequency: 50 Hz
max. efficiency: 95%
Protection class: IP22
System monitoring with the Victron Cerbo gx and gx Toch display
Easily control and monitor your system with the Cerbo gx communication center. The flexible connectivity options maximize your system performance. Control of your system is possible regardless of location thanks to the Cerbo gx. With the gx Touch 50 display, you always have all the parameters of your system in view and can make changes easily and quickly.
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batterie...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
KfW eligible
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a matching MultiPlus-II inverter and a Cerbo gx from Victron Energy for system monitoring. This allows you to secure your energy supply even if there is a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply of the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Areas of application of the Offgridtec backup kit:
Emergency power supply
Off-grid solar systems (stand-alone systems)
Retrofitting of existing PV systems
Grid-connected power supply
UPS systems
What does the Offgridtec backup system contain?
Pylontech us3000c 3.5kWh LiFePO4 battery (2x or 4x depending on selection)
1x Victron MultiPlus-II 48/5000/70-50 230v device combination
1x Victron Lynx Distributor
1x Victron Cerbo gx control panel
1x Victron gx Touch 50 display panel for Cerbo gx
1x 1,8m VE.Can to Can-Bus bms type A cable
1x 3m Victron rj45 utp cable
1x 1m Offgridtec battery cable 50mm² M8 eyelets
1x 200A 70v mega fuse
1x Pylontech battery connection cable set
The Multiplus device combination is pre-configured to fit the Pylontech batteries.
Extended use of your backup system
To establish an ESS (Energy Storage System) with the backup system, an energy meter with connection cable is required for each:
• Victron VM-3P75CT Energy Meter 3-phase electricity meter 75A/phase
• 5m Victron RJ45 UTP Cable
With this electricity meter, you can perform a grid-parallel installation and then monitor your energy consumption or control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for 1-phase systems. This enables seamless integration of decentralized energy sources and consumers into the existing power grid.
To ensure that an ESS can be considered in the pre-configuration, the meter must be purchased in advance or as part of the system!
The storage solution - Pylontech us3000c batteries
The us3000c storage is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage. Thanks to advanced technology, the highest safety and long life are guaranteed even with regular deep discharge.
Extremely cycle resistant - over 6000 cycles at 95% DoD
Absolutely intrinsically safe lithium technology
High charge and discharge capacity possible
Integrated bms
Very high storage density - low weight and compact design
Absolutely maintenance-free and durable
Pre-charge function to protect the ESS system from overvoltage function
The electronics core - the Victron Multiplus-II device combination
The Multiplus-II is a high-end device combination from Victron Energy, consisting of 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus can therefore be ideally used as a backup device in grid-connected and grid-independent power supply systems.
5000W non-linear load power - 4000w continuous load - 9000w peak power
for 48v battery voltage
50a transfer switch
70A battery charger
Output voltage: 230 vac, frequency: 50 Hz
max. efficiency: 95%
Protection class: IP22
System monitoring with the Victron Cerbo gx and gx Toch display
Easily control and monitor your system with the Cerbo gx communication center. The flexible connectivity options maximize your system performance. Control of your system is possible regardless of location thanks to the Cerbo gx. With the gx Touch 50 display, you always have all the parameters of your system in view and can make changes easily and quickly.
Shipped in 2-5 days
More versions available
VAT-exempt delivery possible*
1-01-015890
Offgridtec Vorkonfiguration für 3-phasige Backup-Kits und HomePremium
Sie wünschen eine Vorkonfiguration der Komponenten Ihres 3-phasigen Komplettsystems von Offgridtec.
Dafür legen Sie einfach diesen Artikel in Ihren Warenkorb und wir werden die Konfiguration vor Auslieferung des Systems durchführen.
Vorkonfiguration für:
3-phasige Backup-Kits
3-phasige HomePremium-Systeme
Sie wünschen eine Vorkonfiguration der Komponenten Ihres 3-phasigen Komplettsystems von Offgridtec.
Dafür legen Sie einfach diesen Artikel ...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
Sie wünschen eine Vorkonfiguration der Komponenten Ihres 3-phasigen Komplettsystems von Offgridtec.
Dafür legen Sie einfach diesen Artikel in Ihren Warenkorb und wir werden die Konfiguration vor Auslieferung des Systems durchführen.
Vorkonfiguration für:
3-phasige Backup-Kits
3-phasige HomePremium-Systeme
Shipped in 2-5 days
VAT-exempt delivery possible*
KfW eligible
More versions available
4-01-018240-001
Offgridtec KStar 10.2kWh ess hybrid system 6.45kWp Luxen Full Black 3-phase
Discover the future of energy supply now with the Offgridtec All-in-one system KStar BluE-S and the matching solar modules from Luxen Solar. The powerful 3-phase system consists of an efficient 10 kW hybrid inverter, the latest LFP batteries with a combined capacity of 10.2 kWh and bifacial 430w Full Black solar modules, which impresses with its smbb half-cut cell technology and excellent anti-PID and low lid performance. Thanks to the hybrid function, the inverter can use both solar energy and mains power to efficiently cover your energy needs. The integrated distribution box enables space-saving and convenient distribution of the generated electricity. The modular battery packs are characterized by their catl LFP cell technology and are among the safest and most efficient on the market. Their innovative thermal foil enables uninterrupted operation, even at temperatures as low as -10°C. Mobile app monitoring allows you to keep control of your system anytime, anywhere. The adjustable output in each phase and support for diesel generator control offer you maximum flexibility. Of course, you can also make settings directly on the device via the practical display. The intelligent energy management and the various operating modes ensure a reliable power supply in the event of a power failure or blackout. Compact, safe, efficient Plug&Play - simple installation Three-phase output Adjustable power in each phase Glass-glass module N-TOPCon cell technology smbb Half-Cut cell technology Low bos & LCOE Bifacial cell module technology excellent anti-PID and low lid performance 3 bypass diodes Supports high PV voltage Mobile app monitoring On&Off grid parallel system Supports diesel generator control (DI/DO) Two MPP trackers (Maximum Power Point) catl-LFP battery 90% depth of discharge (DoD) Service life: ~10,000 cycles The hybrid system contains Luxen Solar 430w Mono Bifacial Glass-Glass Solar Module Full Black Luxneri Series n5(depending on selection 15x, 30x, 50x) 1x Offgridtec KStar BluE-S-10KT Hybrid Inverter 10kW 3 phase 2x Offgridtec KStar BluE-Pack battery 5.1kWh 1x Offgridtec KStar Battery pack stand base 1x Offgridtec KStar connection cable set inverter battery 1x 70m Lapp solar cable h1z2z2-k 1x6 WH/BK 10x MC4 plug coupling connector 10mm² PV-KST4/10II & PV-KBT4/10II 1x MC4 key tensioner (assembly tool for MC4 connectors) The 430w Luxen Solar - Bifacial, Full Black The monocrystalline and bifacial 430w Full Black Series n5 solar module from Luxen Solar (mpn lnvb-430nd) impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. The smbb half-cut cell technology was also used in production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE. The glass-glass module also offers excellent anti-PID and low lid performance, as well as high hotspot resistance. Its elegant full-black design makes it the ideal choice for Solaranstallations on residential buildings, balcony power plants and many other applications. The manufacturer is confident in its product and guarantees a 30-year service life. about the 430w Luxen n5 solar module Glass-glass module N-TOPCon cell technology smbb Half-Cut cell technology Low bos & LCOE Bifacial cell module technology excellent anti-PID and low lid performance 3 bypass diodes 30-year performance guarantee and 15-year product guarantee high cell efficiency of over 22% Half-cell technology In half-cell technology ("half-cut"), conventional silicon cells are cut in half using a laser. The resulting halves are then centrally connected in parallel, which leads to an increased output of the solar module by reducing resistance losses. Bifacial cells Bifacial means two-faced. And the name says it all: the Luxen Solar 430w n5 module is also equipped with solar cells on the back, which means that sunlight can be absorbed even better and the efficiency of the overall module is increased. Technical data maximum output: 430w Module voltage (Vmp): 32.04V max. current (Imp): 13.42A Open circuit voltage (Voc): 38.96V Short-circuit current (Isc): 14.13A Module efficiency: 22.02% Dimensions: 1722 x 1134 x 30 mm Operating temperature range: -40°C to +85°C Cells: 108 (6x18) max. operating voltage: 1500v DC Weight: 23,5kg Hybrid inverter Compared to conventional inverters, hybrid inverters offer extended functionality. They not only enable the solar power generated to be fed into the grid, but also to be stored in batteries. This means that the stored solar power can be used even when there is no solar radiation. In addition, hybrid inverters optimize power consumption by using the generated solar power primarily in the household before feeding it into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. It also offers comprehensive protection functions, including short circuit, ac leakage current, earth fault, islanding, overload, overvoltage and DC polarity protection. This ensures safe and reliable use of the inverter and protects against potential hazards and damage. about the Blue-S-10KT Hybrid Inverter Plug&Play - simple installation Three-phase output Adjustable power in each phase Supports high PV voltage Modular and stackable design supports up to 8 BluE-S 5.1kWh batteries Mobile app monitoring On&Off parallel grid system Supports diesel generator control (DI/DO) Two MPP trackers (Maximum Power Point) Supports Blue-S batteries Technical data Input PV input Recommended module power: up to 20kW Max. DC voltage: 1100V Nominal voltage: 720V MPPT voltage range: 140V-1000V Starting voltage: 200V Max. Input current per mppt: 15A Max. Short-circuit current per mppt: 20A Battery input Battery nominal voltage 51.2V Charging voltage range: 44-58V Max. Charging current: 160A Max. Discharge current: 200A Output Grid output ac rated output power: 10kW Max. ac apparent power: 11kVa rated ac voltage: 400Vac ac frequency range: 50/60Hz+/- 5Hz Rated output current: 13.3A Max. Output current: 16A Backup output: ac rated output power: 9kW Max. ac output current: 10kVa Rated output current: 13.3A Max. Output voltage: 14.5A Nominal output voltage: 400V Rated output frequency: 50/60Hz Further information Dimensions: 540 x 980 x 240mm Weight: 51kg Operating temperature: -25°C~60°C Protection class: IP65 Blue-Pack 5.1kWh battery The KStar Blue-Pack 5.1kWh battery module is part of the BluE Residential ess system and offers flexible and customized energy expansion with modular LFP battery technology. It has an integrated bms and can easily expand the BluE Residential ess system up to 20kWh to meet individual requirements. A reliable energy supply for residential and commercial applications and new possibilities for a sustainable future are made possible. about the 5.1kWh battery Modular and stackable design Plug&Play - easy installation Mobile app monitoring catl-LFP battery Flexible capacity options up to 20kWh 90% depth of discharge (DoD) Heating film The Heating Film is an innovative technology used in the BluE system to improve performance at extreme temperatures. The Heating Film is a thin layer of heatable material that is applied around the battery cells. At low temperatures, the Heating Film automatically activates to heat the battery and maintain an optimum operating temperature. This reduces the battery's sensitivity to cold and improves the performance and service life of the battery. The Heating Film is an effective solution to ensure the reliability of battery systems even under adverse climatic conditions and to guarantee stable performance. Technical data: Battery type: catl Lithium Iron Phosphate (LiFePO4) Capacity: 5.12kWh Nominal voltage: 51.2V DC circuit breaker: 125A Operating voltage range: 44.8-56.5V Service life: ~10,000 cycles Max. Charge/discharge current: 50A/80A DC rated power: 4096W Max. Charging/discharging power: 2825W/4096W Operating temperature range: -10 to 50°C Dimensions: 540 x 490 x 240mm System weight: 54kg Protection class: IP65 Notes on installation: System may only be commissioned by a qualified electrician. Crimping pliers are required to crimp the MC4 connectors onto the cable ends for connection.
Discover the future of energy supply now with the Offgridtec All-in-one system KStar BluE-S and the matching solar modules from Luxen Solar. The power...
Shipped in 3-6 Werktage
Shipped in 3-6 Werktage
VAT-exempt delivery possible*
KfW eligible
Discover the future of energy supply now with the Offgridtec All-in-one system KStar BluE-S and the matching solar modules from Luxen Solar. The powerful 3-phase system consists of an efficient 10 kW hybrid inverter, the latest LFP batteries with a combined capacity of 10.2 kWh and bifacial 430w Full Black solar modules, which impresses with its smbb half-cut cell technology and excellent anti-PID and low lid performance. Thanks to the hybrid function, the inverter can use both solar energy and mains power to efficiently cover your energy needs. The integrated distribution box enables space-saving and convenient distribution of the generated electricity. The modular battery packs are characterized by their catl LFP cell technology and are among the safest and most efficient on the market. Their innovative thermal foil enables uninterrupted operation, even at temperatures as low as -10°C. Mobile app monitoring allows you to keep control of your system anytime, anywhere. The adjustable output in each phase and support for diesel generator control offer you maximum flexibility. Of course, you can also make settings directly on the device via the practical display. The intelligent energy management and the various operating modes ensure a reliable power supply in the event of a power failure or blackout. Compact, safe, efficient Plug&Play - simple installation Three-phase output Adjustable power in each phase Glass-glass module N-TOPCon cell technology smbb Half-Cut cell technology Low bos & LCOE Bifacial cell module technology excellent anti-PID and low lid performance 3 bypass diodes Supports high PV voltage Mobile app monitoring On&Off grid parallel system Supports diesel generator control (DI/DO) Two MPP trackers (Maximum Power Point) catl-LFP battery 90% depth of discharge (DoD) Service life: ~10,000 cycles The hybrid system contains Luxen Solar 430w Mono Bifacial Glass-Glass Solar Module Full Black Luxneri Series n5(depending on selection 15x, 30x, 50x) 1x Offgridtec KStar BluE-S-10KT Hybrid Inverter 10kW 3 phase 2x Offgridtec KStar BluE-Pack battery 5.1kWh 1x Offgridtec KStar Battery pack stand base 1x Offgridtec KStar connection cable set inverter battery 1x 70m Lapp solar cable h1z2z2-k 1x6 WH/BK 10x MC4 plug coupling connector 10mm² PV-KST4/10II & PV-KBT4/10II 1x MC4 key tensioner (assembly tool for MC4 connectors) The 430w Luxen Solar - Bifacial, Full Black The monocrystalline and bifacial 430w Full Black Series n5 solar module from Luxen Solar (mpn lnvb-430nd) impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. The smbb half-cut cell technology was also used in production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE. The glass-glass module also offers excellent anti-PID and low lid performance, as well as high hotspot resistance. Its elegant full-black design makes it the ideal choice for Solaranstallations on residential buildings, balcony power plants and many other applications. The manufacturer is confident in its product and guarantees a 30-year service life. about the 430w Luxen n5 solar module Glass-glass module N-TOPCon cell technology smbb Half-Cut cell technology Low bos & LCOE Bifacial cell module technology excellent anti-PID and low lid performance 3 bypass diodes 30-year performance guarantee and 15-year product guarantee high cell efficiency of over 22% Half-cell technology In half-cell technology ("half-cut"), conventional silicon cells are cut in half using a laser. The resulting halves are then centrally connected in parallel, which leads to an increased output of the solar module by reducing resistance losses. Bifacial cells Bifacial means two-faced. And the name says it all: the Luxen Solar 430w n5 module is also equipped with solar cells on the back, which means that sunlight can be absorbed even better and the efficiency of the overall module is increased. Technical data maximum output: 430w Module voltage (Vmp): 32.04V max. current (Imp): 13.42A Open circuit voltage (Voc): 38.96V Short-circuit current (Isc): 14.13A Module efficiency: 22.02% Dimensions: 1722 x 1134 x 30 mm Operating temperature range: -40°C to +85°C Cells: 108 (6x18) max. operating voltage: 1500v DC Weight: 23,5kg Hybrid inverter Compared to conventional inverters, hybrid inverters offer extended functionality. They not only enable the solar power generated to be fed into the grid, but also to be stored in batteries. This means that the stored solar power can be used even when there is no solar radiation. In addition, hybrid inverters optimize power consumption by using the generated solar power primarily in the household before feeding it into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. It also offers comprehensive protection functions, including short circuit, ac leakage current, earth fault, islanding, overload, overvoltage and DC polarity protection. This ensures safe and reliable use of the inverter and protects against potential hazards and damage. about the Blue-S-10KT Hybrid Inverter Plug&Play - simple installation Three-phase output Adjustable power in each phase Supports high PV voltage Modular and stackable design supports up to 8 BluE-S 5.1kWh batteries Mobile app monitoring On&Off parallel grid system Supports diesel generator control (DI/DO) Two MPP trackers (Maximum Power Point) Supports Blue-S batteries Technical data Input PV input Recommended module power: up to 20kW Max. DC voltage: 1100V Nominal voltage: 720V MPPT voltage range: 140V-1000V Starting voltage: 200V Max. Input current per mppt: 15A Max. Short-circuit current per mppt: 20A Battery input Battery nominal voltage 51.2V Charging voltage range: 44-58V Max. Charging current: 160A Max. Discharge current: 200A Output Grid output ac rated output power: 10kW Max. ac apparent power: 11kVa rated ac voltage: 400Vac ac frequency range: 50/60Hz+/- 5Hz Rated output current: 13.3A Max. Output current: 16A Backup output: ac rated output power: 9kW Max. ac output current: 10kVa Rated output current: 13.3A Max. Output voltage: 14.5A Nominal output voltage: 400V Rated output frequency: 50/60Hz Further information Dimensions: 540 x 980 x 240mm Weight: 51kg Operating temperature: -25°C~60°C Protection class: IP65 Blue-Pack 5.1kWh battery The KStar Blue-Pack 5.1kWh battery module is part of the BluE Residential ess system and offers flexible and customized energy expansion with modular LFP battery technology. It has an integrated bms and can easily expand the BluE Residential ess system up to 20kWh to meet individual requirements. A reliable energy supply for residential and commercial applications and new possibilities for a sustainable future are made possible. about the 5.1kWh battery Modular and stackable design Plug&Play - easy installation Mobile app monitoring catl-LFP battery Flexible capacity options up to 20kWh 90% depth of discharge (DoD) Heating film The Heating Film is an innovative technology used in the BluE system to improve performance at extreme temperatures. The Heating Film is a thin layer of heatable material that is applied around the battery cells. At low temperatures, the Heating Film automatically activates to heat the battery and maintain an optimum operating temperature. This reduces the battery's sensitivity to cold and improves the performance and service life of the battery. The Heating Film is an effective solution to ensure the reliability of battery systems even under adverse climatic conditions and to guarantee stable performance. Technical data: Battery type: catl Lithium Iron Phosphate (LiFePO4) Capacity: 5.12kWh Nominal voltage: 51.2V DC circuit breaker: 125A Operating voltage range: 44.8-56.5V Service life: ~10,000 cycles Max. Charge/discharge current: 50A/80A DC rated power: 4096W Max. Charging/discharging power: 2825W/4096W Operating temperature range: -10 to 50°C Dimensions: 540 x 490 x 240mm System weight: 54kg Protection class: IP65 Notes on installation: System may only be commissioned by a qualified electrician. Crimping pliers are required to crimp the MC4 connectors onto the cable ends for connection.
Shipped in 3-6 Werktage
More versions available
VAT-exempt delivery possible*
More versions available
4-01-019540-002
Offgridtec Backup kit retrofit kit 20.5kWh with Pytes 48100r-c battery Victron MultiPlus-II 48/5000 3-phase
The 3-phase backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems contain lithium-ion batteries from Pytesthe matching MultiPlus-II inverters and a Cerbo gx from Victron Energy for system monitoring. This allows you to secure your energy supply even in the event of a power failure. With the batteries from Pytes, you have a storage capacity of 20.5 kwh to 30.7 kwh, depending on your choice, to use your energy efficiently and remain self-sufficient for longer if required. Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply to the connected consumers. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed. Areas of application for the Offgridtec backup kit: Emergency power supply Off-grid solar systems (stand-alone systems) Retrofitting existing PV systems Grid-connected power supply UPS systems what does the Offgridtec backup system contain? Pytes E-Box-48100r-c 100ah 51v LiFePO4 battery (depending on selection 4-6x) 3x Victron MultiPlus-II 48/5000/70-50 230V 1x Victron Cerbo gx communication center System monitoring 1x Victron gx Touch 50 display panel for Cerbo gx 1x Victron Energy Lynx Power In (m8) 2x Victron Lynx Distributor (m8) 2x 0.9m Victron rj45 utp cable 1x 3m Victron rj45 utp cable 1x Victron mk3-usb VE.bus to usb interface 1x Pytes data cable battery to Victron Inverter 3.5m MultiPlus 2 Pytes battery inverter power cable 2m, positive (2-3x depending on selection) Pytes battery inverter power cable 2m, negative (2-3x depending on selection) 2x Offgridtec set of 5 MEGA fuses 100a 70v for 48v systems 6x Offgridtec® 1m battery cable 35mm² m8 eyelets on both sides When selecting electricity meter 1x Victron vm-3p75ct Energy Meter 1xVictron 5m rj45 utp cable Extended use of your backup system The backup kit is supplied either with or without Victron electricity meter and cable, although an energy meter is always required to set up an energy storage system. With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem. In order for an ess to be included in a pre-configuration, the meter must be purchased in advance or for the system! The storage solution - Pytes E-Box-481000R-C ThePytes e-box 48100r-c is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, sophisticated design and impressive performance. The battery is compact, easy to install, maintenance-free and can be used as the basic building block of an energy storage system by connecting it in parallel. Technical data Battery chemistry: Lithium iron phosphate (LFP) Nominal voltage: 51.2 V Voltage range: 47.5-57.6 V Rated power: 100 Ah Nominal energy: 5.12 kwh Max. Charging current: 50 A Max. Discharge: 50 A Charging temperature: 0~50°C Discharge temperature: -10~50°C efficiency: ≥95% Communication protocol: rs-232, rs-485, CAN Cycle life: >6000 cycles at 90% DoD Dimensions: 440 x 620 x 117 mm Weight: 51 kg The electronic core - the Victron Multiplus-II appliance combination The Multiplus-II is a high-end appliance combination from Victron Energyconsisting of a 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-island function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid power supply systems. 8000 w power with non-linear load 6400 w continuous load and 15000 w peak power for 48v battery voltage 100a transfer switch 110A battery charger Output voltage: 230 vac, frequency: 50 Hz max. efficiency: 95 Protection class: IP22 Configuration The MultiPlus-II is delivered unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system for you, we can do this for you for an additional charge. To do this, please download the article "Offgridtec Pre-configuration" in the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed. System monitoring with the Victron Cerbo gx and gx Toch display With the Cerbo gx communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo gx, you can control your system from anywhere. With the gx Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily. Safety note: Only have this complete system installed and commissioned by a qualified electrician.
The 3-phase backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems contain lithium...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
The 3-phase backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems contain lithium-ion batteries from Pytesthe matching MultiPlus-II inverters and a Cerbo gx from Victron Energy for system monitoring. This allows you to secure your energy supply even in the event of a power failure. With the batteries from Pytes, you have a storage capacity of 20.5 kwh to 30.7 kwh, depending on your choice, to use your energy efficiently and remain self-sufficient for longer if required. Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply to the connected consumers. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed. Areas of application for the Offgridtec backup kit: Emergency power supply Off-grid solar systems (stand-alone systems) Retrofitting existing PV systems Grid-connected power supply UPS systems what does the Offgridtec backup system contain? Pytes E-Box-48100r-c 100ah 51v LiFePO4 battery (depending on selection 4-6x) 3x Victron MultiPlus-II 48/5000/70-50 230V 1x Victron Cerbo gx communication center System monitoring 1x Victron gx Touch 50 display panel for Cerbo gx 1x Victron Energy Lynx Power In (m8) 2x Victron Lynx Distributor (m8) 2x 0.9m Victron rj45 utp cable 1x 3m Victron rj45 utp cable 1x Victron mk3-usb VE.bus to usb interface 1x Pytes data cable battery to Victron Inverter 3.5m MultiPlus 2 Pytes battery inverter power cable 2m, positive (2-3x depending on selection) Pytes battery inverter power cable 2m, negative (2-3x depending on selection) 2x Offgridtec set of 5 MEGA fuses 100a 70v for 48v systems 6x Offgridtec® 1m battery cable 35mm² m8 eyelets on both sides When selecting electricity meter 1x Victron vm-3p75ct Energy Meter 1xVictron 5m rj45 utp cable Extended use of your backup system The backup kit is supplied either with or without Victron electricity meter and cable, although an energy meter is always required to set up an energy storage system. With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem. In order for an ess to be included in a pre-configuration, the meter must be purchased in advance or for the system! The storage solution - Pytes E-Box-481000R-C ThePytes e-box 48100r-c is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, sophisticated design and impressive performance. The battery is compact, easy to install, maintenance-free and can be used as the basic building block of an energy storage system by connecting it in parallel. Technical data Battery chemistry: Lithium iron phosphate (LFP) Nominal voltage: 51.2 V Voltage range: 47.5-57.6 V Rated power: 100 Ah Nominal energy: 5.12 kwh Max. Charging current: 50 A Max. Discharge: 50 A Charging temperature: 0~50°C Discharge temperature: -10~50°C efficiency: ≥95% Communication protocol: rs-232, rs-485, CAN Cycle life: >6000 cycles at 90% DoD Dimensions: 440 x 620 x 117 mm Weight: 51 kg The electronic core - the Victron Multiplus-II appliance combination The Multiplus-II is a high-end appliance combination from Victron Energyconsisting of a 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-island function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid power supply systems. 8000 w power with non-linear load 6400 w continuous load and 15000 w peak power for 48v battery voltage 100a transfer switch 110A battery charger Output voltage: 230 vac, frequency: 50 Hz max. efficiency: 95 Protection class: IP22 Configuration The MultiPlus-II is delivered unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system for you, we can do this for you for an additional charge. To do this, please download the article "Offgridtec Pre-configuration" in the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed. System monitoring with the Victron Cerbo gx and gx Toch display With the Cerbo gx communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo gx, you can control your system from anywhere. With the gx Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily. Safety note: Only have this complete system installed and commissioned by a qualified electrician.
Shipped in 2-5 days
More versions available
VAT-exempt delivery possible*
More versions available
4-01-019515-002
Backup system with Pylontech LiFePo4 storage and MultiPlus ii 48/3000 Victron Energy inverter 1-phase
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a matching MultiPlus-II inverter and a Cerbo gx from Victron Energy for system monitoring. This allows you to secure your energy supply even if there is a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply of the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Areas of application of the Offgridtec backup kit:
Emergency power supply
Off-grid solar systems (stand-alone systems)
Retrofitting of existing PV systems
Grid-connected power supply
UPS systems
What does the Offgridtec backup system contain?
Pylontech us2000c 2.4kWh LiFePO4 battery (2x or 4x depending on selection)
1x Victron MultiPlus-II 48/3000/35-32 230v device combination
1x Victron Lynx Distributor
1x Victron Cerbo gx control panel
1x Victron gx Touch 50 display panel for Cerbo gx
1x 1,8m VE.Can to Can-Bus bms type A cable
1x 3m Victron rj45 utp cable
1x 1m Offgridtec battery cable 50mm² M8 eyelets
1x 125a 70v mega fuse
1x Pylontech battery connection cable set
The Multiplus device combination is pre-configured to fit the Pylontech batteries.
Extended use of your backup system
To establish an ESS (Energy Storage System) with the backup system, an energy meter with connection cable is required for each:
• Victron VM-3P75CT Energy Meter 3-phase electricity meter 75A/phase
• 5m Victron RJ45 UTP Cable
With this electricity meter, you can perform a grid-parallel installation and then monitor your energy consumption or control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for 1-phase systems. This enables seamless integration of decentralized energy sources and consumers into the existing power grid.
To ensure that an ESS can be considered in the pre-configuration, the meter must be purchased in advance or as part of the system!
The storage solution - Pylontech us2000c batteries
The us2000c storage is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage. Thanks to state-of-the-art technology, the highest level of safety and a long service life are guaranteed, even with regular deep discharge.
Extremely cycle resistant - over 6000 cycles at 95% DoD
Absolutely intrinsically safe lithium technology
High charge and discharge capacity possible
Integrated bms
Very high storage density - low weight and compact design
Absolutely maintenance-free and durable
Pre-charge function to protect the ESS system from overvoltage function
The electronics core - the Victron Multiplus-II device combination
The Multiplus-II is a high-end device combination from Victron Energy, consisting of 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus can therefore be ideally used as a backup device in grid-connected and grid-independent power supply systems.
3000W non-linear load power - 2400w continuous load - 6000w peak power
for 48v battery voltage
32A transfer switch
35A battery charger
Output voltage: 230 vac, frequency: 50 Hz
max. efficiency: 95%
Protection class: IP22
System monitoring with the Victron Cerbo gx and gx Toch display
Easily control and monitor your system with the Cerbo gx communication center. The flexible connectivity options maximize your system performance. Control of your system is possible regardless of location thanks to the Cerbo gx. With the gx Touch 50 display, you always have all the parameters of your system in view and can make changes easily and quickly.
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batterie...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a matching MultiPlus-II inverter and a Cerbo gx from Victron Energy for system monitoring. This allows you to secure your energy supply even if there is a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply of the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Areas of application of the Offgridtec backup kit:
Emergency power supply
Off-grid solar systems (stand-alone systems)
Retrofitting of existing PV systems
Grid-connected power supply
UPS systems
What does the Offgridtec backup system contain?
Pylontech us2000c 2.4kWh LiFePO4 battery (2x or 4x depending on selection)
1x Victron MultiPlus-II 48/3000/35-32 230v device combination
1x Victron Lynx Distributor
1x Victron Cerbo gx control panel
1x Victron gx Touch 50 display panel for Cerbo gx
1x 1,8m VE.Can to Can-Bus bms type A cable
1x 3m Victron rj45 utp cable
1x 1m Offgridtec battery cable 50mm² M8 eyelets
1x 125a 70v mega fuse
1x Pylontech battery connection cable set
The Multiplus device combination is pre-configured to fit the Pylontech batteries.
Extended use of your backup system
To establish an ESS (Energy Storage System) with the backup system, an energy meter with connection cable is required for each:
• Victron VM-3P75CT Energy Meter 3-phase electricity meter 75A/phase
• 5m Victron RJ45 UTP Cable
With this electricity meter, you can perform a grid-parallel installation and then monitor your energy consumption or control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for 1-phase systems. This enables seamless integration of decentralized energy sources and consumers into the existing power grid.
To ensure that an ESS can be considered in the pre-configuration, the meter must be purchased in advance or as part of the system!
The storage solution - Pylontech us2000c batteries
The us2000c storage is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage. Thanks to state-of-the-art technology, the highest level of safety and a long service life are guaranteed, even with regular deep discharge.
Extremely cycle resistant - over 6000 cycles at 95% DoD
Absolutely intrinsically safe lithium technology
High charge and discharge capacity possible
Integrated bms
Very high storage density - low weight and compact design
Absolutely maintenance-free and durable
Pre-charge function to protect the ESS system from overvoltage function
The electronics core - the Victron Multiplus-II device combination
The Multiplus-II is a high-end device combination from Victron Energy, consisting of 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus can therefore be ideally used as a backup device in grid-connected and grid-independent power supply systems.
3000W non-linear load power - 2400w continuous load - 6000w peak power
for 48v battery voltage
32A transfer switch
35A battery charger
Output voltage: 230 vac, frequency: 50 Hz
max. efficiency: 95%
Protection class: IP22
System monitoring with the Victron Cerbo gx and gx Toch display
Easily control and monitor your system with the Cerbo gx communication center. The flexible connectivity options maximize your system performance. Control of your system is possible regardless of location thanks to the Cerbo gx. With the gx Touch 50 display, you always have all the parameters of your system in view and can make changes easily and quickly.
Shipped in 2-5 days
More versions available
VAT-exempt delivery possible*
More versions available
4-01-014590-001
Offgridtec backup kit 19.2kWh Pylontech LiFePO4 battery - Victron MultiPlus II 48/10000 3-phase inverter
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a suitable MultiPlus-II inverter and a Cerbo GX for system monitoring from Victron Energy. This allows you to secure your energy supply even in the event of a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply to the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Areas of application for the Offgridtec backup kit:
Emergency power supply
Off-grid solar systems (stand-alone systems)
Retrofitting existing PV systems
Grid-connected power supply
UPS systems
What does the Offgridtec backup system contain?
Pylontech US5000 4.8kWh LiFePO4 battery (4x or 6x depending on selection)
3x Victron MultiPlus-II 48/10000/140-100 230V device combination
2x Victron Lynx Distributor
1x Victron Lynx Power In
1x Victron Cerbo GX control panel
1x Victron GX Touch 50 display panel for Cerbo GX
1x 1.8m VE.Can to Can-Bus BMS type A cable
1x 3m Victron RJ45 UTP Cable
2x 0,9m Victron RJ45 UTP Cable
6x 1m Offgridtec battery cable 50mm² M8 eyelets
4x Pylontech battery connection cable set
2x Offgridtec set of 5 MEGA fuses 200A
The Multiplus device combination is preconfigured to suit the Pylontech batteries.
Extended use of your backup system
An energy meter with connection cable is required to set up an ESS (Energy Storage System) with the backup system:
Victron VM-3P75CT Energy Meter 3-phase electricity meter 75A/phase
5m Victron RJ45 UTP Cable
With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for single-phase systems. This means that seamless integration of decentralised energy sources and consumers into the existing power grid is no problem.
In order for an ESS to be taken into account in the pre-configuration, the meter must be purchased in advance or for the system!
The storage solution - Pylontech US5000 batteries
The Pylontech US5000 storage system is a lithium battery of the latest generation. It was specially developed to fulfil the high demands placed on backup storage systems. Thanks to state-of-the-art technology, maximum safety and a long service life are guaranteed even with regular deep discharges.
Extremely cycle-resistant - over 6000 cycles at 95% DoD
Absolutely intrinsically safe lithium technology
High charging and discharging capacity possible
Integrated BMS
Very high storage density - low weight and compact design
Absolutely maintenance-free and durable
Pre-charging function to protect the ESS system from overvoltage function
The electronic core - the Victron Multiplus-II device combination
The Multiplus-II is a high-end device combination from Victron Energy, consisting of a 48V battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-islanding function. This expands the PowerControl and PowerAssist functions to 50A and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid power supply systems.
10000W power with non-linear load - 8000W continuous load - 18000W peak power for 48V battery voltage
100A transfer switch
140A battery charger
Output voltage: 230 VAC, frequency: 50 Hz
Max. efficiency: 95
Protection class: IP22
System monitoring with the Victron Cerbo GX and GX Toch display
With the Cerbo GX communication centre, you can easily control and monitor your system. The flexible connection options maximise your system performance. Thanks to the Cerbo GX, you can control your system from anywhere. With the GX Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily.
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batterie...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a suitable MultiPlus-II inverter and a Cerbo GX for system monitoring from Victron Energy. This allows you to secure your energy supply even in the event of a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply to the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Areas of application for the Offgridtec backup kit:
Emergency power supply
Off-grid solar systems (stand-alone systems)
Retrofitting existing PV systems
Grid-connected power supply
UPS systems
What does the Offgridtec backup system contain?
Pylontech US5000 4.8kWh LiFePO4 battery (4x or 6x depending on selection)
3x Victron MultiPlus-II 48/10000/140-100 230V device combination
2x Victron Lynx Distributor
1x Victron Lynx Power In
1x Victron Cerbo GX control panel
1x Victron GX Touch 50 display panel for Cerbo GX
1x 1.8m VE.Can to Can-Bus BMS type A cable
1x 3m Victron RJ45 UTP Cable
2x 0,9m Victron RJ45 UTP Cable
6x 1m Offgridtec battery cable 50mm² M8 eyelets
4x Pylontech battery connection cable set
2x Offgridtec set of 5 MEGA fuses 200A
The Multiplus device combination is preconfigured to suit the Pylontech batteries.
Extended use of your backup system
An energy meter with connection cable is required to set up an ESS (Energy Storage System) with the backup system:
Victron VM-3P75CT Energy Meter 3-phase electricity meter 75A/phase
5m Victron RJ45 UTP Cable
With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for single-phase systems. This means that seamless integration of decentralised energy sources and consumers into the existing power grid is no problem.
In order for an ESS to be taken into account in the pre-configuration, the meter must be purchased in advance or for the system!
The storage solution - Pylontech US5000 batteries
The Pylontech US5000 storage system is a lithium battery of the latest generation. It was specially developed to fulfil the high demands placed on backup storage systems. Thanks to state-of-the-art technology, maximum safety and a long service life are guaranteed even with regular deep discharges.
Extremely cycle-resistant - over 6000 cycles at 95% DoD
Absolutely intrinsically safe lithium technology
High charging and discharging capacity possible
Integrated BMS
Very high storage density - low weight and compact design
Absolutely maintenance-free and durable
Pre-charging function to protect the ESS system from overvoltage function
The electronic core - the Victron Multiplus-II device combination
The Multiplus-II is a high-end device combination from Victron Energy, consisting of a 48V battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-islanding function. This expands the PowerControl and PowerAssist functions to 50A and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid power supply systems.
10000W power with non-linear load - 8000W continuous load - 18000W peak power for 48V battery voltage
100A transfer switch
140A battery charger
Output voltage: 230 VAC, frequency: 50 Hz
Max. efficiency: 95
Protection class: IP22
System monitoring with the Victron Cerbo GX and GX Toch display
With the Cerbo GX communication centre, you can easily control and monitor your system. The flexible connection options maximise your system performance. Thanks to the Cerbo GX, you can control your system from anywhere. With the GX Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily.
Shipped in 2-5 days
More versions available
VAT-exempt delivery possible*
More versions available
4-01-019530-002
Offgridtec Backup kit retrofit kit 4.8 kWh with Pytes E-Box 4850-c battery Victron MultiPlus ii 48/3000 3-phase
The 3-phase backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems contain lithium-ion batteries from Pytesthe matching MultiPlus-II device combination and a Cerbo gx from Victron Energy for system monitoring. This allows you to secure your energy supply even in the event of a power failure. With the batteries from Pytes, you have a storage capacity of 4.8 kWh to 9.6 kWh to use your energy efficiently and remain self-sufficient for longer if required. Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply to the connected consumers. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed. Areas of application for the Offgridtec backup kit: Emergency power supply Off-grid solar systems (stand-alone systems) Retrofitting existing PV systems Grid-connected power supply UPS systems What does the 3-phase Offgridtec backup system contain? Pytes E-Box 4850-c lfp battery 2.4kWh battery (2-4x depending on selection) 3x Victron MultiPlus-II 48/3000/35-32 230V 1x Victron Cerbo gx communication center System monitoring 1x Victron gx Touch 50 display panel for Cerbo gx 2x Victron Lynx Distributor (m8) 1x Victron mk3-usb VE.bus to usb interface 3x Offgridtec® 1m battery cable 35mm² m8 eyelets on both sides 2x 0.9m Victron rj45 utp cable 1x 3m Victron rj45 utp cable 3x Offgridtec set of 5 MEGA fuses 125a 70v for 48v systems 1x Pytes data cable battery to Victron Inverter 3.5m MultiPlus 2 Pytes battery inverter power cable 2m, positive (1-2x depending on selection) Pytes battery inverter power cable 2m, negative (1-2x depending on selection) When selecting electricity meter 1x Victron vm-3p75ct Energy Meter 1xVictron 5m rj45 utp cable Extended use of your backup system The backup kit is supplied either with or without Victron electricity meter and cable, whereby an energy meter is required to set up an energy storage system. With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem. In order for an ess to be included in the pre-configuration, the meter must be purchased in advance or for the system! The storage solution - Pytes E-Box 4850-c The Pytes e-box 4850-c is an advanced lfp battery with a capacity of 2.4kWh, which impresses with its outstanding safety, sophisticated design and impressive performance. This battery is compact, easy to install, requires no maintenance and can serve as the basic element of an energy storage system through parallel connection. Technical data Battery chemistry: Lithium iron phosphate (lfp) Nominal voltage: 48 V Voltage range: 45-54 V Rated power: 50 Ah Nominal energy: 2.4 kWh Max. Charging current: 50 A Max. Discharge current: 50 A Operating temperature range: -10°C~50°C Efficiency: ≥95% Communication protocol: rs-232, rs-485, CAN Cycle life: >6000 cycles at 90% DoD Dimensions: 433 x 410 x 81mm (2U) Weight: 25 kg The electronic core - the Victron Multiplus-II device combination The Multiplus-II is a high-end appliance combination from Victron Energyconsisting of a 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-island function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid power supply systems. 3000W power with non-linear load 2400W continuous load - 6000w peak power for 48v battery voltage 32A transfer switch 35A battery charger Output voltage: 230 vac, frequency: 50 Hz max. efficiency: 95 Protection class: IP22 Configuration The MultiPlus-II is delivered unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system for you, we can do this for you for an additional charge. To do this, place the article linked above "Offgridtec Pre-configuration" in the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed. System monitoring with the Victron Cerbo gx and gx Toch display With the Cerbo gx communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo gx, you can control your system from anywhere. With the gx Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily. Safety note: Only have this complete system installed and commissioned by a qualified electrician.
The 3-phase backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems contain lithium...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
The 3-phase backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems contain lithium-ion batteries from Pytesthe matching MultiPlus-II device combination and a Cerbo gx from Victron Energy for system monitoring. This allows you to secure your energy supply even in the event of a power failure. With the batteries from Pytes, you have a storage capacity of 4.8 kWh to 9.6 kWh to use your energy efficiently and remain self-sufficient for longer if required. Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply to the connected consumers. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed. Areas of application for the Offgridtec backup kit: Emergency power supply Off-grid solar systems (stand-alone systems) Retrofitting existing PV systems Grid-connected power supply UPS systems What does the 3-phase Offgridtec backup system contain? Pytes E-Box 4850-c lfp battery 2.4kWh battery (2-4x depending on selection) 3x Victron MultiPlus-II 48/3000/35-32 230V 1x Victron Cerbo gx communication center System monitoring 1x Victron gx Touch 50 display panel for Cerbo gx 2x Victron Lynx Distributor (m8) 1x Victron mk3-usb VE.bus to usb interface 3x Offgridtec® 1m battery cable 35mm² m8 eyelets on both sides 2x 0.9m Victron rj45 utp cable 1x 3m Victron rj45 utp cable 3x Offgridtec set of 5 MEGA fuses 125a 70v for 48v systems 1x Pytes data cable battery to Victron Inverter 3.5m MultiPlus 2 Pytes battery inverter power cable 2m, positive (1-2x depending on selection) Pytes battery inverter power cable 2m, negative (1-2x depending on selection) When selecting electricity meter 1x Victron vm-3p75ct Energy Meter 1xVictron 5m rj45 utp cable Extended use of your backup system The backup kit is supplied either with or without Victron electricity meter and cable, whereby an energy meter is required to set up an energy storage system. With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem. In order for an ess to be included in the pre-configuration, the meter must be purchased in advance or for the system! The storage solution - Pytes E-Box 4850-c The Pytes e-box 4850-c is an advanced lfp battery with a capacity of 2.4kWh, which impresses with its outstanding safety, sophisticated design and impressive performance. This battery is compact, easy to install, requires no maintenance and can serve as the basic element of an energy storage system through parallel connection. Technical data Battery chemistry: Lithium iron phosphate (lfp) Nominal voltage: 48 V Voltage range: 45-54 V Rated power: 50 Ah Nominal energy: 2.4 kWh Max. Charging current: 50 A Max. Discharge current: 50 A Operating temperature range: -10°C~50°C Efficiency: ≥95% Communication protocol: rs-232, rs-485, CAN Cycle life: >6000 cycles at 90% DoD Dimensions: 433 x 410 x 81mm (2U) Weight: 25 kg The electronic core - the Victron Multiplus-II device combination The Multiplus-II is a high-end appliance combination from Victron Energyconsisting of a 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-island function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid power supply systems. 3000W power with non-linear load 2400W continuous load - 6000w peak power for 48v battery voltage 32A transfer switch 35A battery charger Output voltage: 230 vac, frequency: 50 Hz max. efficiency: 95 Protection class: IP22 Configuration The MultiPlus-II is delivered unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system for you, we can do this for you for an additional charge. To do this, place the article linked above "Offgridtec Pre-configuration" in the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed. System monitoring with the Victron Cerbo gx and gx Toch display With the Cerbo gx communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo gx, you can control your system from anywhere. With the gx Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily. Safety note: Only have this complete system installed and commissioned by a qualified electrician.
Shipped in 2-5 days
More versions available