EcoFlow Smart Home Relay Module 16a

With the EcoFlow Smart Home module you have the perfect solution to integrate your EcoFlow delta Pro devices into your home. Up to 10 home circuits can be connected to ensure uninterrupted operation.Features EcoFlow Smart Home Panelapp controlSecure power supply for your homePerfect as a back-up solution in case of emergencyControl through the EcoFlow appThrough the EcoFlow app, you have the ability to monitor and control your power consumption. Through the many settings you can manage your system and view real-time data, which allows you to avoid expensive electricity prices with time-based billing of your electricity consumption. A very interesting feature is the possibility to prioritize circuits which should be switched off if there is not enough emergency power available. For all connected circuits, the app can provide consumption statistics, which help to optimize energy consumption.Best equipped in case of power outagesIn the event of a power outage, the Smart Home module will switch directly to your up to 10 integrated circuits and draw power from the connected delta Pro unit. When properly equipped, your home is safely supplied with up to 7200 w of power and 25 kwh of energy. With a delta Pro Power Station, the maximum output power is 3600 w. The capacity then depends on whether the system is combined with an additional battery. A maximum current of 30 a is specified for channels 1-4, and 20 a for the remaining channels. Due to the low switching time of only 20ms, you will hardly notice any loss of power and your circuits will continue to be supplied.Technical data:dimensions: 500 x 330 x 120 mmWeight: approx. 9 kgProtection class: IP20Switching time 20msUp to 10 circuitsNominal system voltage: 220 v / 240 vRelay module rated current: 6 a, 13 a, 16 a, 20 a, 30 aMax. Input rating for delta Pro: max. 7200 w (2x 3600 w)delta Pro charging power: max. 6800 w (2x 3400 w)Max. connected battery power: 21.6 kwh (6x 3.6 kwh)Notice: Installation of the EcoFlow Smart Home Panel must be performed by a licensed electrician.Scope of delivery:1x EcoFlow Smart Home Panel

Relay modules are required for "Smart Home Panel Only" to function. The EcoFlow Smart Home Module is the perfect solution for integrating your EcoFlow DELTA Pro appliances into your home. Up to 10 home circuits can be connected to ensure uninterrupted operation. Features EcoFlow Smart Home Panel App control Secure power supply for your home Perfect as a back-up solution in case of emergency Control through the EcoFlow app The EcoFlow app allows you to monitor and control your electricity consumption. Through the many setting options, you can manage your system and display real-time data, which allows you to avoid expensive electricity prices with time-dependent billing of your electricity consumption. A very interesting function here is the possibility to prioritise circuits that are to be switched off if there is not enough emergency power available. The app can provide consumption statistics for all connected circuits, which help to optimise energy consumption. Best equipped for power outages Should a power failure occur, the Smart Home panel switches directly to your up to 10 integrated circuits and draws power from the connected DELTA Pro unit. With the appropriate equipment, your home is safely supplied with up to 7200 W of power and 25 kWh of energy. With a DELTA Pro Power Station, the maximum output power is 3600 W. The capacity then depends on whether the system is combined with an additional battery. A maximum current of 30 A is specified for channels 1-4, and 20 A for the remaining channels. Due to the short switching time of only 20ms, you will hardly notice any loss of power and your circuits will continue to be supplied. Technical data: Dimensions: 500 x 330 x 120 mm Weight: approx. 9 kg Protection class: IP20 Switching time 20ms Up to 10 circuits System nominal voltage: 220 V / 240 V Max. Input rating for DELTA Pro: max. 7200 W (2x 3600 W) DELTA Pro charging power: max. 6800 W (2x 3400 W) Max. Connected battery power: 21.6 kWh (6x 3.6 kWh) Note: The installation of the EcoFlow Smart Home Panel must be carried out by a licensed electrician. Scope of delivery: 1x EcoFlow Smart Home Panel1x Infinity connection cable1x Connection cable set1x wall bracket1x installation manual