Lapp H07RN-F Rubber-Sheathed Cable, 2×2.5 mm², without Ground Wire, Sold by the Meter

The Lapp H07RN-F rubber-sheathed cable (2×2.5 mm² ) is suitable for connection and control applications in dry and damp environments, as well as outdoors. Two fine-stranded Class 5 copper conductors and the robust rubber jacket allow for flexible installation, for example in workshops, on farms, and on portable equipment. The cable does not have a protective conductor and is sold by the meter in the ordered length.

H07RN-F rubber-sheathed cable, 2 × 2.5 mm²

• 2 conductors, each with a cross-sectional area of 2.5 mm²
• Version without green-yellow protective conductor
• Rated voltage: 450/750 V
• Class 5 fine-stranded copper conductors
• For dry and damp areas as well as outdoor use
• Oil-resistant, UV-resistant, and flame-retardant design
• Rubber core insulation and rubber outer sheath
• HAR-marked design in accordance with EN 50525-2-21
• Sold by the meter in the required length

For workshops, agriculture, and equipment connections

The H07RN-F cable can be used for electrical appliances, power tools, portable motors, and machine tools, provided its technical specifications are observed. It is suitable for fixed or flexible installation, as well as for installation in protective conduits, and can also be used outdoors.

Two-conductor version without protective conductor

The designation 2X2.5 stands for two conductors, each with a cross-sectional area of 2.5 mm², without a green-yellow protective conductor. The conductors are marked brown and blue. Before selecting this cable, verify that the intended application is permitted without a protective conductor. If a protective conductor is required, the corresponding G-version is necessary.

Flexible installation within defined limits

The fine-stranded Class 5 copper conductors facilitate flexible handling. However, the cable is not intended for continuous operational movement, forced routing, or use on cable drums and reels. The minimum permissible bending radius depends on the specific installation method.

Technical Data

• Cable designation: H07RN-F
• Configuration: 2×2.5
• Number of conductors: 2
• Conductor cross-section: 2.5 mm² per conductor
• Ground wire: No
• Conductor colors: Brown, Blue
• Conductor: fine-stranded bare copper wires
• Conductor class: Class 5 according to IEC 60228 / EN IEC 60228
• Construction: per EN 50525-2-21
• Conductor insulation: EI4 rubber compound
• Outer jacket: EM2 rubber compound
• Sheath color: Black

• Rated voltage U₀/U: 450/750 V
• Test voltage (conductor to conductor): 2500 V AC

• Temperature range: -25 °C to +60 °C (maximum conductor temperature)
• Outer diameter: 10.2–13.1 mm
• Minimum bending radius: 4 to 8 times the outer diameter, depending on the installation method
• Flame resistance: IEC 60332-1-2 / EN 60332-1-2
• Oil resistance: EN 50363-2-1
• UV-resistant: Yes
• HAR marking: Yes
• Packaging: Sold by the meter

Contents

1 × H07RN-F rubber-sheathed cable, 2×2.5 mm², sold by the meter in the quantity ordered