Victron AGM Super Cycle Battery 12V 60Ah M6

The Victron Energy AGM Super Cycle Battery 12 V / 60 Ah (MPN: BAT412060082) is a cycle-resistant VRLA battery designed for applications involving frequent partial discharges and occasional deep discharges. It is suitable as an energy storage solution for mobile, marine, and off-grid systems. Thanks to its special Super Cycle technology, it offers high cycle stability even at deeper discharge depths. The electrolyte, bound in glass fiber mats, enables a leak-proof design. With its compact dimensions and M6 threaded inserts, the battery can be integrated into a variety of battery systems.

Victron AGM Super Cycle 12V 60Ah for cyclic applications

• 60 Ah rated capacity at 12 V battery voltage
• Specially designed for frequent partial discharges and occasional deep discharges
• At least 300 cycles at 100% depth of discharge under defined test conditions
• At least 700 cycles at 60% and 1,000 cycles at 40% depth of discharge
• Leak-proof AGM technology with valve-regulated VRLA casing
• Suitable for mobile, marine, and off-grid power systems
• Optimized charging parameters for cyclic operation, trickle charging, and storage
• Compact dimensions of 224 × 135 × 178 mm
• M6 threaded inserts for battery connection

High cycle life even during deep discharges

Super-Cycle technology reduces positive plate softening and sulfation following deep discharges. This makes the battery suitable for applications with frequent discharge depths of 60 to 80%, as well as occasional full discharges. Under defined test conditions, it achieves at least 300 cycles at 100%, 700 cycles at 60%, and 1,000 cycles at 40% depth of discharge. To ensure a long service life, the battery should be recharged promptly after discharge using appropriate charging parameters.

Capacity Depends on Discharge Time

The rated capacity of 60 Ah is achieved when discharged over 20 hours to 10.8 V. At higher discharge currents, the available capacity is reduced to 56 Ah at C10 or 52 Ah at C5. These values allow the battery system to be designed to meet the specific needs of various loads.

Optimized Charging Parameters for AGM Batteries

For normal cyclic operation, a charging voltage of 14.2 to 14.6 V is recommended. For fast recharging, the voltage range is 14.6 to 14.9 V. The float charging voltage is 13.5 to 13.8 V, while 13.2 to 13.5 V is specified for storage mode. If temperatures remain below 10 °C or above 30 °C for extended periods, temperature compensation of −24 mV/°C relative to 25 °C is required.

Technical Specifications

• Manufacturer Part Number: BAT412060082
• Product Series: AGM Super Cycle
• Battery technology: AGM, valve-regulated lead-acid (VRLA) battery
• Nominal voltage: 12 V
• Capacity at C20 to 10.8 V: 60 Ah
• Capacity at C10 to 10.8 V: 56 Ah
• Capacity at C5 to 10.8 V: 52 Ah
• Connection: M6 threaded insert
• Dimensions: 224 × 135 × 178 mm
• Weight: 14 kg
• Cold Cranking Amps (CCA) at 0 °F: 300 A
• Reserve capacity at 80 °F: 90 minutes
• Cycle life at 100% depth of discharge: at least 300
• Cycles at 60% depth of discharge: at least 700
• Cycle life at 40% depth of discharge: at least 1,000
• Charging voltage, normal cyclic operation: 14.2–14.6 V
• Charging voltage, fast recharge: 14.6–14.9 V
• Float charge voltage: 13.5–13.8 V
• Voltage in storage mode: 13.2–13.5 V
• Temperature compensation: −24 mV/°C
• Reference temperature: 25 °C

Package Contents

1 × Victron Energy AGM Super Cycle Battery 12 V / 60 Ah with M6 threaded inserts