Victron MultiPlus 12/2k/100-32 Inverter/Charger 12V 2000W 230V VE.Bus
€947.78*
€796.45**
The Victron Energy MultiPlus 12/2k/100-32 230V VE.Bus (MPN: PMP122200010) combines a pure sine wave inverter with 2,000 W continuous power and 4,000 W peak power, an adaptive 100-A battery charger, and a 32-A transfer switch for 12-V battery systems. The unit is suitable for mobile and stationary power supply systems connected to the utility grid, shore power, or a generator. PowerControl limits the load on the connected AC source, while PowerAssist provides additional power from the battery during brief load spikes. If the external power supply fails, the MultiPlus automatically switches to inverter mode in less than 20 ms. The unit can be configured and integrated into larger energy systems via VE.Bus.
MultiPlus 12/2k/100-32 Inverter and Charger
- 2,000 W continuous power and 4,000 W peak power
- Pure sine wave output voltage at 230 V AC
- Integrated battery charger with up to 100 A
- 32-A transfer switch for external AC sources
- PowerControl for limiting the AC input load
- PowerAssist to support load peaks from the battery
- Automatic switchover to inverter mode in less than 20 ms
- Separate 1-A charging output for a starter battery
- VE.Bus for configuration and system integration
- Parallel and three-phase operation possible
- Search mode to reduce self-consumption
- Programmable relay for control and alarm functions
PowerControl and PowerAssist for limited AC sources
PowerControl adjusts the battery charging current to the available power from the grid, shore power, or generator connection. If consumption increases, battery charging is reduced accordingly. If the AC power is insufficient for short-term load peaks, PowerAssist supplements it with energy from the battery.
Automatic switchover and adaptive battery charging
If the external AC supply fails, the MultiPlus switches to inverter mode in less than 20 ms. The integrated 100-A charger operates with an adaptive four-stage charging curve. In addition, a 1-A output is available for trickle charging a starter battery. The included battery temperature sensor enables temperature-dependent adjustment of the charging voltage.
VE.Bus for Configuration and System Expansion
The MultiPlus can be configured and integrated into larger energy systems via VE.Bus. Up to six identical units can be operated in parallel; a three-phase system is also possible. A separately available VE.Bus Smart Dongle is required for Bluetooth. Remote monitoring via the VRM portal requires a compatible GX unit with an internet connection.
Installation and Battery Connection
The MultiPlus does not have an internal DC fuse. For this 12-V model, an external 300-A DC fuse and a battery capacity of 350 to 1,000 Ah are recommended. The recommended cable cross-section is 70 mm² for each positive and negative wire up to 5 m, or 95 mm² for wire lengths between 5 and 10 m. The unit requires a dry, well-ventilated installation location with at least 10 cm of clearance. Installation and configuration must be performed by a qualified electrician.
Technical Specifications
- Battery system: 12 V
- DC input voltage range: 9.5–17 V
- AC output voltage: 230 V
- Output frequency: 50 Hz
- Continuous power at 25 °C: 2,000 W
- Continuous power at 40 °C: 1,800 W
- Peak power: 4,000 W
- Maximum efficiency: 93%
- No-load power: 11 W
- No-load power in search mode: 3 W
- AC input voltage: 187–265 V
- Transfer switch: 32 A
- Maximum charging current for the house battery: 100 A
- Charging current for starter battery: 1 A
- Charging algorithm: four-stage adaptive
- Constant voltage: 14.4 V
- Trickle charge voltage: 13.8 V
- Storage voltage: 13.2 V
- Communication: VE.Bus
- Parallel operation: up to six identical units
- Three-phase operation: possible
- Programmable relay: available
- Internal DC fuse: not available
- Recommended external DC fuse: 300 A
- Recommended battery capacity: 350–1,000 Ah
- Battery connection: M8 bolts
- AC connection: screw terminals up to 13 mm²
- Protection rating: IP21
- Operating temperature: −40 to +65 °C
- Dimensions (H × W × D): 506 × 236 × 147 mm
- Weight: 15.5 kg
Package Contents
1 × Victron Energy MultiPlus 12/2k/100-32 230V VE.Bus
1 × Battery temperature sensor
Manufactuerer Information
Victron Energy
Victron Energy B.V.
De Paal 35
1351 JG Almere
Netherlands
Mail: sales@victronenergy.com
Tel.: +31 365359700