Fothermo Hybrid Photovoltaic Boiler 30 Liters

With the 30L hybrid water heater from Fothermo (MPN PVB-30-AC), you can generate your hot water using cost-effective solar power. Connecting the solar panels takes just a few seconds via plug-and-play and provides you with a reliable hot water supply. Unlike the other 30-liter Fothermo off-grid water heater, the hybrid version allows for supplementary heating via the 230V power grid. Due to the low voltage level of less than 50V, no licensed electrician is required for installation

Product Highlights

• 30-Liter Photovoltaic Hybrid Water Heater
• Hot water for the sink, shower, or kitchen
• No connection to the power grid required
• Innovative MPP tracker
• Complete system with MC4 PV connectors
• No professional installation required
• Digital temperature display
• 1/2” water connection on the water heater
• Plug-and-play

The water heaters operate at a power output of up to 1500W. If desired, there is also the option of supplementary heating via the existing heating system. Installation is straightforward, similar to that of conventional storage water heaters. A vacuum relief valve and a check valve are also included to ensure maximum safety.

1500W supplementary heating

The Fothermo Hybrid Boiler offers a smart solution for situations where solar energy is insufficient to heat the water for an extended period of time. Using the 230 V auxiliary heating system with an adjustable dial, a minimum temperature can be set, e.g., 35°C. If the water temperature drops below this value, the boiler is automatically reheated with 1,500 W of power from the grid until the minimum temperature is reached again. The water heater has a maximum water temperature of 65°C and, when fully heated, can provide approximately 72 liters of 34°C water for showers (for a 30-liter water heater) or 180 liters for the 80-liter water heater.

Integrated MPP Tracker

The innovative MPP tracker increases the output of your photovoltaic system by up to 50% by ensuring that the connected PV modules always operate at their optimal operating point.

Technical Specifications

• Volume: 29 liters
• Nominal pressure: 0.7 MPa
• Max. heating power: 550 W
• Max. current: 15.5 A
• Protection Class: IP 24
• Dimensions: 400 x 400 x 600 mm
• Weight: 15 kg

Photovoltaic connection

• Max. photovoltaic heating power: 550 W
• Max. photovoltaic current draw: 15.5 A
• Max. water temperature: 65°C
• Integrated MPP tracker
• Recommended photovoltaic power: 300–600 Wp
• Max. connectable photovoltaic power: 2000 Wp
• Max. open-circuit voltage: 42.4 V
• Connector: MC4

Caution: The open-circuit voltage of the solar modules must not exceed 42.4 V. When using multiple modules, they must be connected in parallel, not in series!

Package contents:

1x Fothermo 30-liter hybrid hot water boiler (PVB-30-AC)
1x Return and Pressure Relief Valve