Offgridtec® 30w mono 12v solar panel

Offgridtec AGM solar batteries are explicitly designed for use in solar and hybrid systems. AGM technology is clearly superior to conventional lead-acid batteries with liquid electrolyte and offers the following advantages: Advantages of using Offgridtec AGM technology absolutely safe from leakage, no matter what position the battery is in screwable M6 terminals instead of battery terminals (100% fixed) 100% maintenance-free over the entire service life life expectancy up to 10 years (depending on usage pattern) Highest quality level: Our batteries are all manufactured in A-quality from the best materials. This can best be seen in the weight of the batteries. Compare our products with those of other manufacturers! can be discharged deeper than lead-acid batteries mature technology, used in over 1000 Offgridtec solar systems very cycle-resistant, therefore predestined for use in solar systems AGM batteries are somewhat more expensive to purchase than lead-acid batteries, but this pays off after just a few years, as lead-acid systems require much more maintenance and have a shorter life than AGM-based storage solutions. Especially for smaller energy generation systems with a maximum storage capacity of 4-8kWh, AGM is the first choice. Technical data Battery type: AGM Cycle type Storage capacity 20HR(0.85A,1.75V): 17 Ah Storage capacity 10HR(1.65A,1.75V): 16.5Ah Storage capacity 5HR(2.9A,1.75V): 14.5Ah Storage capacity 1HR(11.1A,1.75V): 11,1Ah System voltage: 12V Charge voltage cyclic use: 14.4V-14.9V Charging voltage standby use: 13.6V-13.8V Max. charging current: 5.1A Self-discharge: 3% (per month) Battery terminal type: M6 screw terminal Weight: 5,4 Kg Dimensions: 181 x 76 x 167mm Life expectancy: up to 10 years (depending on usage pattern) Battery regulation You are legally obliged to return batteries. You can return them after use to our sales outlet or to a local municipal collection point. Important information according to Battery Regulation Ordinance on the return and disposal of used batteries. Batteries and rechargeable batteries do not belong in household waste. Consumers are legally obliged to return used batteries. They can be returned to Offgridtec.com or to public collection points in the community. Pursuant to § 10 of the Battery Act, a deposit of 7.50 Euro including VAT must be charged by the seller if the end consumer does not have a used starter battery on hand at the time of purchase. If the seller does not charge a deposit because the used battery has been disposed of properly or has been exchanged for new, this amount is not deductible from the purchase Price.

The Steca Solsum-F-generation is one of the most used charge controllers in the field of solar home systems.A multifunctional LED-display allows the quick and easy use of the device. Features:- serial-controller- voltage regulation- automatic voltage adjustment- PWM-regulation- multistep charge technology- current compensated shutdown threshold (loads)- automatic load restart- temperature compensation- joint positive or negative grounding of one clamp- monthly maintenance charge Protection functions:- overload- deep discharge- reverse polarity of module, load and battery- automatic electronical fuse- short-circuit- overvoltage at module input- no-load protection without battery- current reflow at night- overtemperature and overload protection- shutdown at battery overvoltage NOTE: Battery type can only be changed with optional equipment (Steca PA RC100).The default battery type is AGM-/gel-battery.If you want to use this controller to charge a lead-acid battery please let us know via emai or phone.

This cable is needed to connect your inverter to an accumulator. This is a high-quality product made in Germany. If you want to connect the cable to a battery with round poles you find suitable battery binding posts in our shop. Features: - 1,5m Länge - M8 cable shoe - Made in Germany Compatible with M6 and M8 battery terminals. In our shop you also find binding posts to use the cable with round pole batteries.

The Offgridtec Connection Cable Pro 8m 2x2.5mm Solar XLS-R Twin Cable for small modules is equipped with 2.5x10mm ferrules on the charge controller side and 2.5mm R3.5 ring cable shoes on the module side. These cables are designed especially for a direct connection to the module terminal and compatible with our small 10-30W modules. The are also suitable for modules of other brands with 3.5M - 3M terminals, of course. Instantly ready to setup this cable saves a lot of effort during installation. The cable is manufactured in our factory in Lower Bavaria. The optimized design makes this cable slim, light and resistant. If needed this cable can be separated into to conductors without any special tools, yet the connection between them is extremely robust. Details: weather-/UV-resistant according to HD 605/A1 ozone-resistant according to EN50396 halogen-free and flame-retardant good abrasion-characteristics XLS-R T=X-Linked Standard-Reduced Twin - reliable irradiated quality Standards: This cable is also available as TÜV-PV1-F-certified version on demand. Application: Ideal for stand-alone solar systems, on-roof-systems, solar-fields, mobile or built-in systems. Purpose: Easy to split into two separate cables The outer diameter allows space- and weight-saving laying Resistant against mechanical influences Reduces flame spreading and development of toxic smoke gas in case of a fire Meter marks show the exact amount of the used cable during installation Structure: Fine-wired tinned copper conductor Wire isolation made of irradiated copolymer Coating made of irradiated copolymer Coating color black Conductors connected but separable Technical data: Conductor ident code: black/red-blue/red Classification: ETIM 5.0 Class-ID: EC001578 ETIM 5.0 Class-Description: flexible conductor Cable structure: fine-wire according to VDE 0295, class 5 / IEC 60228 class 5 Min. bending radius: fixed installation 4x outer diameter Nominal voltage: AC U0/U: 600/1000V DC U0/U: 900/1500V Max. permitted system voltage: DC 1.8kV (conductor-conductor, non-grounded system) Testing voltage: AC 6500V Temperature range: 40°C to +100°C max. cable temperature

The Victron PWM-Light 12V 24V 10A (MPN SCC010010000) is a reasonable-priced PWM charge controller that was especially developed to control lighting systems. There are several possibilities to configure the switching-off/on of these DC consumers. Of course with this charge controller other things like ventilation can be controlled. Please check the manual for detailled information about the possible configurations.   Important product features: Load output with low battery voltage disconnect function. Lighting control function, one timer only. Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting. Three stage battery charging (bulk, absorption, float), not programmable. Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options: see manual for details Delivery scope: 1x Victron Energy SCC010010000 PWM-Light 12/24-10A 1x Manual