Victron Phoenix Inverter 12/1200 230V VE.Direct 1000W 12V IEC

The Victron Phoenix 12/1200VE.Direct (MPN PIN122120400) is a small sine wave inverter with 1000W continuous power. The device converts 12V DC voltage from your battery into 230V AC alternating current with a pure sine wave voltage and uncompromising power quality, which is also ideal for sensitive electronic products.

Trendsetting efficiency and modern system communication

The Phoenix has outstanding efficiency and, thanks to its ECO mode, is one of the most efficient in its class. using the VE.Direct communication port, you can connect the device to a computer or smartphone with optional accessories and freely program several system parameters, such as the cut-off voltage and restart voltage when the battery is empty! Many other configuration options, such as output frequency and output voltage, as well as a 2-pole alarm contact, are among the performance features of this voltage converter.

The performance of the Phoenix VE.Direct 12/1200 series is currently unmatched on the market for its price and far exceeds the capabilities of other devices in the same performance class.

Technical features of the Phoenix 12/1200 VE.Direct

• 1000 watts continuous power at 230V 50Hz sine wave voltage
• 1200 watts continuous power with non-linear load
• Full control over almost all system parameters
• Suitable for all common 12V batteries
• 230V AC power with pure sine wave delivers perfect power quality
• Freely programmable switch-on and switch-off thresholds
• Freely adjustable output voltage in the range of 210–245V

Technical highlights of the Phoenix VE.Direct series 250VA – 1200VA

• VE.Direct connection allows you to connect the power converter to a computer (VE.Direct to USB interface cable required) or your smartphone, where you can keep an eye on the status of your device at all times with the free Victron app (VE.Direct Bluetooth Smart Dongle required).
• Fully programmable parameters: Threshold values for triggering and resetting alarms when the battery charge level is low - Threshold values for switching off and restarting when battery voltage levels are low- Output voltage 210 - 245V - Threshold values for shutdown and restart at low battery voltage values - Frequency 50 Hz or 60 Hz - Threshold value for ECO mode on/off and ECO mode sensor
• Integrated ECO mode: In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable default setting: every 2.5 seconds). if the load exceeds a preset threshold value, the inverter remains switched on.

Proven reliability of the power converter: The complete bypass, supplemented by a ring transformer topology, has proven itself over many years. The inverters are short-circuit-proof and protected against overheating (whether caused by overload or the ambient temperature).

High switch-on power: This is required to switch on loads such as voltage converters for LED lamps, halogen lamps, or power tools.
Remote-controlled on/off switching possible: A remote-controlled on/off switch can be connected with a two-pole plug or between the positive pole of the battery and the left contact of the two-pole plug.

Scope of delivery:
1x Victron PIN122120400 Phoenix 12/1200 12V to 230V 1000W 50Hz 60Hz