Safe shopping with solar experts
Fast Shipping
Top choice renowned brands
Customer service:
+49 (0) 8721 91994-00
Victron SmartSolar mppt 150/35 35a 12v/24v solar charge controller
The SmartSolar 150/35 mppt from Victron Energy (scc115035210) belongs to the latest generation of smart solar charge controllers, with integrated Bluetooth for data transfer and configuration via app on smartphone or tablet. It supports batteries with a voltage of 12v 24v 36v or even 48v and is therefore very versatile. The maximum charging current is 35a and uses the latest charging methods. Depending on the system voltage, the regulator can thus efficiently use 500w (12v) to 2000w (48v) to charge your batteries. In addition, this device also allows for partial shading compensation and one of the most reliable mppt trackers on the market. VE-Direct data port for programming, real time data analysis and display of history Modern Apple and Android smartphones, and tablets can be connected via VE.Direct to the system monitors gx Color Control, the Venus gx, or the mppt Control Panel, for example. High-speed mpp tracker of the latest generation Especially in overcast conditions, when light intensity is constantly changing, an extremely fast mppt controller improves energy output by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllers. In addition, the 150/35 features several other innovative technologies such as the VE.Direct communication port. extensive electronic protection Reverse battery connection protection PV reverse current lock Protection against overheating of the device Protection against short circuits Protection against reverse polarity PV connection key product features of SmartSolar 150/35 35a 12v 24v 36v 48v mppt latest generation ultra-fast mpp tracker ensures best possible yield even in overcast conditions automatic detection of mpp voltage in case of partial shading provides further yield improvement compared to "simple" mppt charge controller integrated VE.Direct data communication port for connection to additional devices like Bluetooth Smart Dongle or the gx Color Control Panel high maximum efficiency of 98 fully programmable charging algorithms which are later manually activated and toggled via a switch on the housing Rated charge current 35a, 100v maximum PV open circuit voltage 12v:500w / 24v:1000W / 36v:1500w / 48v:2000w integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm integrated temperature sensor balances maintenance and constant charge voltage according to temperature Day/night time control and light dimming option Scope of delivery1x Victron Energy scc115035210 SmartSolar mppt 150/35 12v 24v 36v 48v 35a charge controllerInstruction manual
€367.17*

The SmartSolar 150/35 mppt from Victron Energy (scc115035210) belongs to the latest generation of smart solar charge controllers, with integrated Blue...

Shipped in 1-3 days

Shipped in 1-3 days

Victron Smartsolar MPPT 100/20 20A 12V 24 solar charger
The Smartsolar 100/20-48 from Victron Energy (mpn scc110020160r) is a mppt solar charge controller with 20a max charge current for charging 12v and 24v batteries. Unlike the Bluesolar version, the Smart version has integrated Bluetooth, which eliminates the need to purchase a Bluetooth dongel. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control. The integrated Bluetooth in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices. The most important technical features at a glance 20a max. charging current, suitable for 12v and 24v batteries nominal PV power for 12v systems: 290W nominal PV power for 24v systems: 580W nominal PV power for 48v systems: 1160W 20a load output high peak efficiency of 98 freely programmable battery charging algorithm (via the free Victron Connect APP) Light dimming functions programmable (via the free Victron Connect APP) Ultra fast maximum power point tracking max. PV open circuit voltage: 100V Charging algorithm: multi-stage, adaptive integrated Bluetooth module Ultra fast maximum power point tracking Especially in overcast conditions when light intensity is constantly changing, an ultra-fast mppt controller improves power output by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllers. intelligent load output Deep discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a preset voltage value. Alternatively, an algorithm for intelligent battery management can be selected: see BatteryLife. The load output is short-circuit proof. Battery Life: intelligent battery management If the solar charge controller is not able to charge the battery to its full capacity within a day, the status of the battery will constantly alternate between "partially charged" and "end of discharge". This mode of operation (no regular full charging) will damage a lead-acid battery within a few weeks or months. The Battery-Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold day by day (i.e., disconnects the load earlier) until the energy gained is sufficient to charge the battery to near 100%. From this point, the load disconnection threshold is modulated so that charging to near 100% is achieved about once a week. Scope of delivery: 1x Victron Energy Smartsolar mppt 100/20-48 20a 12v 24v 48v solar charge controller 1x instruction manual Note The device shows the imprint 48v - on the packaging of the device the data sheet of the 48v version is printed on the side. Contrary to this confusing information on the device itself, this is as described for both 12v and 24v - and now also suitable for 48v battery banks. Until recently these were separate devices - one for 12v/24v and one for 48v - these two have now been combined and the printing on the case and packaging has been taken from the 48v version
€178.02*

The Smartsolar 100/20-48 from Victron Energy (mpn scc110020160r) is a mppt solar charge controller with 20a max charge current for charging 12v and 24...

Shipped in 1-3 days

Shipped in 1-3 days

Victron Smartsolar MPPT 75/15 15A 12V 24V controller
The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the Bluesolar 75/15, the Smart version has integrated Bluetooth, which eliminates the need to purchase a Bluetooth dongel. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control. The integrated Bluetooth in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices. The most important technical features at a glance 15a max. charging current, suitable for 12v and 24v batteries nominal PV power for 12v systems: 220W nominal PV power for 24v systems: 440W 15a load output high peak efficiency of 98% freely programmable battery charging algorithm (via the free Victron Connect APP) Light dimming functions programmable (via the free Victron Connect APP) Ultra fast maximum power point tracking max. PV open circuit voltage: 75V Charging algorithm: multi-stage, adaptive integrated Bluetooth modu Ultra fast maximum power point tracking Especially in overcast conditions when light intensity is constantly changing, an ultra-fast mppt controller improves power output by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllers. intelligent load output Deep discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a preset voltage value. Alternatively, an algorithm for intelligent battery management can be selected: see BatteryLife. The load output is short-circuit proof. Battery Life: intelligent battery management If the solar charge controller is not able to charge the battery to its full capacity within a day, the status of the battery will constantly alternate between "partially charged" and "end of discharge". This mode of operation (no regular full charging) will damage a lead-acid battery within a few weeks or months. The Battery-Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold day by day (i.e., disconnects the load earlier) until the energy gained is sufficient to charge the battery to near 100%. From this point, the load disconnection threshold is modulated so that charging to near 100% is achieved about once a week. Scope of delivery: 1x Victron EnergySCC075015060R Smartsolar mppt 75/15 15a 12v 24v solar charge controller 1x user manual
€133.52*

The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v ba...

Shipped in 1-3 days

Shipped in 1-3 days

Victron Smartsolar MPPT 100/15 15A 12V 24V charger
The Smartsolar 100/15 from Victron Energy (mpn scc110015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the Bluesolar 100/15, the Smart version has integrated Bluetooth, which eliminates the need to purchase a Bluetooth dongel. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control.The integrated Bluetooth in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices The most important technical features at a glance 15a max charge current, suitable for 12v and 24v batteries nominal PV power for 12v systems: 220w nominal PV power for 24v systems: 440w 15a load output high peak efficiency of 98 freely programmable battery charging algorithm (via free Victron Connect app) Light dimming functions programmable (via free Victron Connect app) Ultra fast maximum power point tracking max. PV open circuit voltage: 100v Charging algorithm: multi-level, adaptive integrated Bluetooth modu Ultrafast Maximum Power Point TrackingEspecially in overcast conditions when light intensity is constantly changing, an ultra-fast mppt controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllers intelligent load outputDeep discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a preset voltage value. Alternatively, an algorithm for intelligent battery management can be selected: see BatteryLife.The load output is short circuit protected Battery Life: intelligent battery management If the solar charge controller is not able to charge the battery to its full capacity within one day, the battery status will constantly alternate between "partially charged" and "end of discharge". This mode of operation (no regular full charge) will damage a lead-acid battery within a few weeks or months The Battery-Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold day by day (i.e., disconnects the load earlier) until the energy gained is sufficient to charge the battery to near 100%. From this point, the load disconnection threshold is modulated so that charging to near 100% is achieved approximately once a week Scope of delivery:1x Victron Energy SCC110015060R Smartsolar mppt 100/15 15a 12v 24v solar charge controller1x instruction manual
€155.77*

The Smartsolar 100/15 from Victron Energy (mpn scc110015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v b...

Shipped in 1-3 days

Shipped in 1-3 days

Top seller
MC4 Connector Pair - plug and socket 4-6mm²
This set includes a male and a female MC4-plug. These plugs are original Stäubli MC4-plugs. Details: touchproof, unplugged IP2X protection, plugged IP67 temperature range from -40° to 90°C isolation material: PA snap-in locking-system cable strain relief according to IEC 61984 (06.2001) contact system: MC-contact lamellas contact material: tinned copper flame class:UL94-V0 protection class: II system voltage up to 1000V rated amperage up to 30A
€3.99*

This set includes a male and a female MC4-plug. These plugs are original Stäubli MC4-plugs. Details: touchproof, unplugged IP2X protection, ...

Shipped in 1-3 days

Shipped in 1-3 days

1,5 Battery Cable with 10A fuse - M8 circular cable shoe
This cable is used to connect a solar system's accumulator to a professional charging regulator. The cable comes with an intigrated fuse which protects your charging regulator and downstream devices in case of a shortcut. Features: Length: 1,5m Fuse: 10A Solid rubber fuse holder with protection cap (splash proof) Cable diameter: 6mm² M8 circular eyelet incl. binding post adaptor to connect to batteries with round pole
€18.27*

1.5 Meter (€12.18* / 1 Meter)

Content: 1.5 Meter (€12.18* / 1 Meter)

This cable is used to connect a solar system's accumulator to a professional charging regulator. The cable comes with an intigrated fuse which protect...

Shipped in 1-3 days

Shipped in 1-3 days

Top seller
ÖLFLEX© SOLAR XLS-R T 2X4 BK/RD
ÖLFLEX© solar xls-r t 2x4mm is a radiation crosslinked high-end solar cable made in Germany with optimized cable design is the solar cable -slim, light and robust and saves a lot of time during installation. The twin line can be easily separated into two lines if necessary. Nevertheless, the connection of the two wires is extremely stable if you prefer to leave the cable together.Product featuresWeather/Uv resistant according to hd 605/a1 Ozone resistant according to en 50396 Halogen-free and flame retardant Good notch and abrasion resistance xls-r t= X-Linked Standard-Reduced twin Proven electron beam crosslinked qualityStandard references / approvalsOn request also available as tÜv pv1-f certified version - Ideal for pv stand-alone systemsApplication areasvIdeal for pv stand-alone systems Gable and flat roof photovoltaic systems Photovoltaic or solar field systems Flexible or building-integrated pv systemsBenefitsEasy to separate into two individual lines Reduced outer diameters enable space- and weight-saving installation Robust against mechanical impact Reduction of fire propagation and toxic smoke gas formation in the event of fire Exact quantity control during installation thanks to meter marking on the cable jacketStructureFine stranded, tinned copper conductor Core insulation made of radiation crosslinked copolymer Outer sheath made of radiation crosslinked copolymer Outer sheath color: black Cores connected in parallel with separating webtechnical dataCore ID code: black / red blue / red Classification: EtIM 5.0 Class ID: ec001578 EtIM 5.0 Class description: Flexible cable Conductor stranding: Fine-stranded according to vde 0295, class 5 / iec 60228 Cl.5 Minimum bending radius: Fixed installation: 4 x outer diameter Rated voltage: AC u0/u : 600/1000 v dc u0/u : 900/1500 v max. permissible system voltage: dc 1.8 kv (conductor-conductor, not grounded system) Test voltage: AC 6500 v Temperature range: 40°C to +100°c max. conductor temperature: 40°C to +100°c Conductor temperature ÖLFLEX© solar xls-r t 2x4mm is a radiation crosslinked high-end solar cable made in Germany with optimized cable design the solar cable is -slim, light and robust and saves a lot of time during installation. The twin line can be easily separated into two lines if necessary. Nevertheless, the connection of the two wires is extremely stable if you prefer to leave the cable together.Product featuresWeather/Uv resistant according to hd 605/a1 Ozone resistant according to en 50396 Halogen-free and flame retardant Good notch and abrasion resistance xls-r t= X-Linked Standard-Reduced twin Proven electron beam crosslinked qualityStandard references / approvalsOn request also available as tÜv pv1-f certified version - Ideal for pv stand-alone systemsApplication areasvIdeal for pv stand-alone systems Gable and flat roof photovoltaic systems Photovoltaic or solar field systems Flexible or building-integrated pv systemsBenefitsEasy to separate into two individual lines Reduced outer diameters enable space- and weight-saving installation Robust against mechanical impact Reduction of fire propagation and toxic smoke gas formation in the event of fire Exact quantity control during installation thanks to meter marking on the cable jacketStructureFine stranded, tinned copper conductor Core insulation made of radiation crosslinked copolymer Outer sheath made of radiation crosslinked copolymer Outer sheath color: black Cores connected in parallel with separating webtechnical dataCore ID code: black / red blue / red Classification: EtIM 5.0 Class ID: ec001578 EtIM 5.0 Class description: Flexible cable Conductor stranding: Fine-stranded according to vde 0295, class 5 / iec 60228 Cl.5 minimum bending radius: fixed installation: 4 x outer diameter nominal voltage: AC u0/u : 600/1000 v dc u0/u : 900/1500 v max. permissible system voltage: dc 1.8 kv (conductor-conductor, not grounded system) test voltage: AC 6500 v temperature range: 40°C to +100°c max. conductor temperature
€2.79*

ÖLFLEX© solar xls-r t 2x4mm is a radiation crosslinked high-end solar cable made in Germany with optimized cable design is the solar cable -slim, ligh...

Shipped in 1-3 days

Shipped in 1-3 days

Victron MPPT Control - Remote control for BlueSolar MPPT series
The Victron MPPT Control (MPN SCC900500000) is a solar computer / remote panel that enables you to cofigure and analyze every BlueSolar MPPT charge controller (except the 75/15) with integrated VE.Direct-port.This panel makes configuration and monitoring of your charge controller and its performance parameters more comfortable and easier. Extensive display and control optionsThe MPPT Control provides a wide range of data and values that allow the user a deep look into the charge controller's operation performance. It is not only possible to see the current data but also historical ones which are saved for 30 days in the device's internal storage. Besides current and historical performance data this panel offers even more: the internal storage also holds information about the length of single charging modes like "bulk", "absorption" and "float". This is unique in this price class! Displayed values in Live-Status mode solar module performance in W solar module voltage in V daily output in kWh current charging mode: (OFF, FAULT, BULK, ASORPTION and FLOAT) charging-and discharging current of the battery errors (only when errors occur) battery voltage consumer output status ON/OFF (only on BlueSolar MPPTs with consumer output) consumption on consumer output (only on BlueSolar MPPTs with consumer output) Historical data (30 days) total output in kWh max. module voltage max. battery voltage min. battery voltage last errors Displayed values in 24h-mode daily time exposure for bulk mode daily time exposure for absorption mode daily time exposure for float mode min. battery voltage 24h max. battery voltage 24h max. solar voltage 24h last error Equipment neededTo connect the MPPT Control to your BlueSolar MPPT you need a VE.Direct connection cable - of course also available in our shop. Different ways of installation for the MPPT ControlWith help of the included mounting frame the MPPT Control can be installed directly into a control panel or terminal box. Optionally there is also an according wall-mounting bracket.No matter which of these options you chose a professional high-quality look is guaranteed. Delivery scope:1x Victron SCC900500000 MPPT Control
€89.01*

The Victron MPPT Control (MPN SCC900500000) is a solar computer / remote panel that enables you to cofigure and analyze every BlueSolar MPPT charge co...

Shipped in 1-3 days

Shipped in 1-3 days

The Smartsolar 75/10 from Victron Energy (mpn scc075010060r) is a mppt solar charge controller with 10a max charge current for charging 12v and 24v batteries. Unlike the Bluesolar 75/10, the Smart version has integrated Bluetooth, which eliminates the need to purchase a Bluetooth dongel. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control.

The integrated Bluetooth in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices.

The most important technical features at a glance

  • 10a max. charging current, suitable for 12v and 24v batteries
  • nominal PV power for 12v systems: 145W
  • nominal PV power for 24v systems: 290W
  • 10a load output
  • high peak efficiency of 98
  • freely programmable battery charging algorithm (via the free Victron Connect APP)
  • Light dimming functions programmable (via the free Victron Connect APP)
  • Ultra fast maximum power point tracking
  • max. PV open circuit voltage: 75V
  • Charging algorithm: multi-stage, adaptive
  • integrated Bluetooth module

Ultra fast maximum power point tracking

Especially in overcast conditions when light intensity is constantly changing, an ultra-fast mppt controller improves power output by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllers.

intelligent load output

Deep discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a predefined voltage value. Alternatively, an intelligent battery management algorithm can be selected: see BatteryLife.
The load output is short-circuit proof.

Battery Life: intelligent battery management

If the solar charge controller is unable to charge the battery to its full capacity within a day, the battery status will constantly alternate between "partially charged" and "end of discharge". This mode of operation (no regular full charge) will damage a lead-acid battery within a few weeks or months.

The Battery-Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold day by day (i.e., disconnects the load earlier) until the energy gained is sufficient to charge the battery to near 100%. From this point, the load disconnection threshold is modulated so that charging to near 100% is achieved about once a week.

Scope of delivery:

1x Victron Energy SCC075010060R Smartsolar mppt 75/10 10a 12v 24v solar charge controller
1x instruction manual

Victron_SmartSolar_MPPT_75.10-100.20_Anleitung.pdf Download
Victron_SmartSolar_MPPT_75.10-100.20_Datenblatt.pdf Download
Victron_BlueSolar_SmartSolar_MPPT_Overview.pdf Download
Ambient temperature: -30°C - +60°C
Battery type adjustable: Support for all common battery types
Charge controller type: MPPT
Dimensions: 100 x 113 x 40 mm
Manufacturer: Victron Energy
Number of charging outputs: 1
Own consumption in standby: 10mA
Product Type: MPPT charge controller 10A for 12V and 24V batteries with integrated Bluetooth and extensive setting options as well as an intelligent load output.
Protection type: IP43 (electronic components) IP22 (connection area)
Protective functions: Battery polarity reversal Fuse external, output short circuit, overtemp.
Solar module current (max.): 10A
Warranty: 5 years
Weight: 0,5 kg
offgridtec.com Reviews with ekomi.de
Ist der Victron SmartSolar MPPT 75/10 für ein SPR-150W Modul geeignet?
Dieses Modul ist passend für den von Ihnen gekauften Laderegler.
Ist es möglich 3 dieser MPP Tracker mit je 2 Modulen über dieselbe Batterie parallel zu schalten?
Ja, es ist möglich mehrere SmartSolar MPPTs an einer Batterie anzuschließen. In diesem Fall empfehlen wir die Erstellung eines VE.Smart Netzwerk, damit sich die MPPTs untereinander synchronisieren.
Gibt es für den SmartSolar MPPT-Regler auch ein externes Anzeigedisplay?
Als Kabelgebundes Anzeigedisplay können Sie z.B. das Victron Energy MPPT Control verwenden.
Loading products