Votronic VCC 2424-25 IUoU 3303 B2B Charging Converter 24 V to 24 V, 25 A
€372.52*
The Votronic VCC 2424-25 IUoU (MPN: 3303) is a B2B charging converter designed to charge a 24-V onboard battery from the 24-V vehicle electrical system while driving. With a charging current of up to 25 A, it is suitable for lead-acid, gel, and AGM batteries with a recommended capacity of 50 to 170 Ah. Four adjustable charging programs allow for adaptation to different battery types. Galvanic isolation electrically separates the input and output circuits from one another. An included temperature sensor supports temperature-dependent charge control and, together with the IU₁oU₂ charging characteristic curve, ensures battery charging tailored to actual needs.
Votronic VCC 2424-25 IUoU Charging Converter for 24-V Vehicle Electrical Systems
- 24-V-to-24-V charging converter for battery charging while driving
- Up to 25 A charging current for 24-V vehicle batteries
- Recommended battery capacity of 50–170 Ah; compatible with batteries up to 220 Ah
- Four charging programs for lead-acid, gel, and AGM batteries
- IU₁oU₂ charging characteristic curve with main and trickle charging
- Galvanic isolation between input and output circuits
- Temperature compensation with included 825 temperature sensor
- Battery charging even when loads are connected at the same time
- Flexible control via D+, terminal 15, or input voltage
Reliable battery charging while driving
The VCC 2424-25 IUoU is suitable for motorhomes, specialty vehicles, and boats with a 24-V electrical system. It uses energy from the starter battery and alternator to charge the service battery. The IU₁oU₂ charging characteristic curve controls the main and trickle charging while accounting for connected loads. Voltage drops across the charging lines are compensated for. Thanks to galvanic isolation, there is no electrical connection between the two battery circuits.
Four charging programs for different battery types
The Gel, AGM 1, AGM 2, and Lead Acid charging programs can be selected using switches on the unit. This allows the charging process to be adapted to lead-gel, AGM, and lead-acid batteries. AGM 1 operates at 29.4 V during the main charging phase, while AGM 2 operates at 28.8 V. The selected program must comply with the battery manufacturer’s charging specifications.
Temperature Compensation and Battery Protection
The included 825 temperature sensor measures the temperature of the onboard battery and enables automatic adjustment of the charging voltage. If the battery temperature is too high, the charging converter reduces the charging current or interrupts charging. A temperature-controlled fan assists in cooling the unit. If the temperature is too high, the charging power is reduced.
Flexible Control and Installation
Depending on the input setting, control is via the D+ signal, terminal 15, or voltage-dependent. For vehicles with Euro 6 energy management, a dedicated input setting with control via D+ or terminal 15 is available. The charging converter can be mounted in any orientation, provided that the ventilation openings remain unobstructed and a minimum distance of 10 cm is maintained. Wire cross-sections, cable lengths, and fuses must be selected in accordance with the wiring diagram.
Technical Data
Input and Output
- Nominal input voltage: 24 V DC
- Input voltage range: 22–32 V
- Maximum current draw: 33 A
- Maximum power consumption: 800 W
- Nominal output voltage: 24 V DC
- Maximum charging current: 25 A
- Recommended onboard battery capacity: 50–170 Ah; compatible with batteries up to 220 Ah
- Galvanic isolation: provided
Charging Regulation and Control
- Suitable battery types: Lead-acid, lead-gel, and lead-AGM
- Charging programs: Gel, AGM 1, AGM 2, and Lead Acid
- Charging characteristic curve: IU₁oU₂
- AGM-1 main charging voltage: 29.4 V
- AGM-2 main charging voltage: 28.8 V
- Temperature compensation: via temperature sensor 825
- Control: D+, Terminal 15 or voltage-dependent
- Cooling: temperature-controlled fan
General Technical Specifications
- Manufacturer: Votronic
- Model: VCC 2424-25 IUoU
- Manufacturer part number: 3303
- Product type: B2B buck converter
- Operating temperature: −20 to +45 °C
- Protection rating: IP2X
- Dimensions including mounting flanges: 270 × 139 × 74 mm
- Weight: 1,700 g
Package Contents
1 × Votronic VCC 2424-25 IUoU charging converter
1 × Temperature Sensor 825
1 × Installation and Operating Instructions
Manufactuerer Information
Votronic
VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Straße 2
36341 Lauterbach
Germany
Mail: info@votronic.de
Tel.: +49 6641 911730