The Victron Phoenix 12/500VE.Direct (MPN PIN125010200) is a small sine wave inverter with a constant performance of 400W. This device converts your battery's 12V DC-current in a 230V AC-current with pure sine voltage and at a quality that also sensible electronical devices can be supplied. Phoenix inverters are very efficient and thanks to their ECO-mode the most efficient within their range. Via the VE.Direct data port and optional equipment it is possible to connect the inverter to a computer or smartphone and adjust parameters such as switch-on/off voltage freely. Configuration possibilities like output frequency and voltage as well as a 2-pole alarm contact are only some of the features this inverter provides. At the moment the performance range of the Phoenix VE.Direct 250-500 series is unique on the market and exceeds other devices within this price range by far. Technical features: 400W constant current at 230V 50Hz sine voltage Suitable for all common battery types 230V AC current with pure sine wave provides excellent quality Switch-on/off threshold freely programmable Output voltage freely adjustable within a range of 210V to 245V Technical highlights of the Phoenix VE.Direct 250VA – 500VA seriesVE.Direct data port allows a connection of inverter and computer (VE.Direct to USB-interface cable needed) or smartphone (free Victron app) to monitor your system's current status (VE.Direct Bluetooth Smart Dongle needed).Fully programmable parameters: thresholds for activating and resetting alarms at low battery chargin level + thresholds for switching-off and restarting at low battery voltage values + output voltage 210V - 245V + frequency 50Hz or 60Hz + threshold to de/activate ECO-mode and ECO-mode sensorIntegrated ECO-mode: Running in ECO-mode the inverter switches to standby as soon as the load drops below a predefined value. In standby-mode the inverter switches back on for a short time (default setting: 2.5 seconds)  

The Victron Phoenix 12/1200VE.Direct (mpn pin122120200) is a small sine wave inverter with 1200w continuous power. The device converts 12v DC from your battery to 230v ac AC with a pure sine wave voltage and uncompromising power quality that is ideal for sensitive electronic products. trend-setting efficiency and modern system communication The efficiency of the Phoenix is outstanding and one of the highest in its class thanks to the ECO mode. using the VE.Direct communication port with optional accessories, you can connect the device to a computer or smartphone and program some system parameters such as the switch-off voltage and switch-on voltage when the battery is empty completely freely! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter. The performance range of the Phoenix series VE.Direct 12/1200 is unique on the market at the moment for the price and goes far beyond the capabilities of other devices in the same performance classes. technical features of the Phoenix 12/1200 VE.Direct 1000 Watt continuous power at 230v 50Hz sine wave voltage 1200 watts continuous power at non-linear load full control over almost all system parameters suitable for all common 12v batteries 230v ac power with pure sine wave provides perfect power quality free programmable on and off thresholds freely adjustable output voltage in the range of 210 - 245V technical highlights of the Phoenix VE.Direct series 250va - 1200VA VE.Direct connector allows you to connect the power converter to a computer (VE.Direct to USB interface cable required) or your smartphone where you can always keep an eye on the status of your device with the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Thresholds to trigger and reset low battery alarms + Thresholds to turn off and restart at low battery voltage levels + Output voltage 210 - 245V + Thresholds to turn off and restart at low battery voltage levels + Frequency 50 Hz or 60 Hz + Threshold for ECO mode on/off and ECO mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable default setting: every 2.5 seconds). if the load exceeds a preset threshold, the inverter remains switched on. Proven reliability of the current inverter: Full bypassing in addition with a ring transformer topology has been proven for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or ambient temperature). High inrush power: This is needed to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Remote on/off switching possible: A remote on/off switch can be connected with a two-pole plug or between the positive pole of the battery and the left contact of the two-pole plug. Scope of delivery: 1x Victron pin122120200 Phoenix 12/1200 12v to 230v 1000w 50Hz 60Hz

The Victron Phoenix 48/500VE.Direct (MPN PIN485010200) is a small sine inverter with a constant output of 400W. It converts a 48V DC voltage into 230V AC with pure sine wave, suitable to supply even sensitive electronic devices.Its efficiency level is very high and thanks to the integrated ECO-mode one of the highest in this class. Via the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone which allows the configuration of various system parameters, for example the switch-on and switch-off voltage at low battery charge.Other adjustments like output frequency or voltage as well as a bipolar alarm-contact are only some of this inverter's features. The performance range of the Phoenix series VE.Direct 250-500 at this price is unique on the market and exceeds the abilities of other devices of this performance class enormously. Technical data: 400W constant output at 230V 50Hz sine voltage for 48V battery voltage, works with all common battery types 230V AC current with pure sine wave provides perfect current quality freely programmable switch-on7off threshold adjustable output voltage from 210 - 245V Technical highlights of the Phoenix VE.Direct series 250VA – 500VA 48V VE.Direct output allows the connection of the inverter to a computer (VE.Direct-to-USB cable needed) or your smartphone - together with the free Victron app it is possible to always keep an eye on your device (VE.Direct Bluetooth Smart Dongle needed) Fully programmable parameters: thresholds for activating or resetting alarms at low battery charge + thresholds for activating or restarting at low battery voltage + output voltage 210 - 245V + frequency of 50Hz or 60Hz + thresholds for ECO-mode on/off and ECO-mode sensor Integrated ECO-mode: In this mode the inverter switches to standby as soon as the load falls under a predefined value. In standby-mode the inverter reactivates for a short time (adjustable default setting: every 2.5s). If the load exceeds a predefined threshold the inverter stays activated. Proven reliability of this inverter:The full override via a torodial transformer topology has often proven itself over the last years. This inverters are save from short-circuits and overheating (caused by overload or ambient temperature).High starting performance: This is needed to activate loads like LED-drivers, halogen lamps or electrical tools.Remote controlled on/off-switching possible: A remote on/off-switch can be installed via a bipolar plug between the battery's +-pole and the left contact of the plug. Delivery scope:1x Victron PIN485010200 Phoenix 48/500 48V to 230V 400W 50Hz 60Hz

The Victron Phoenix 12/800VE.Direct (mpn pin121800200) is a small sine wave inverter with 700w continuous power. The device converts 12v DC from your battery to 230v ac AC with a pure sine wave voltage and uncompromising power quality that is ideal for sensitive electronic products. trend-setting efficiency and modern system communicationThe efficiency of the Phoenix is outstanding and one of the highest in its class thanks to the ECO mode. using the VE.Direct communication port with optional accessories, you can connect the device to a computer or smartphone and program some system parameters such as the switch-off voltage and switch-on voltage when the battery is empty completely freely! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter. The performance range of the Phoenix series VE.Direct 12/800 is unique on the market at the moment for the price and goes far beyond the capabilities of other devices in the same performance classes.technical features of the Phoenix 12/800 VE.Direct 700 watts continuous power at 230v 50Hz sine wave voltage 800 watts continuous power at non-linear load full control over almost all system parameters suitable for all common 12v batteries 230v ac power with pure sine wave provides perfect power quality free programmable on and off thresholds freely adjustable output voltage in the range of 210 - 245V technical highlights of the Phoenix VE.Direct series 250va - 800VA VE.Direct connection allows you to connect the power converter to a computer (VE.Direct to USB interface cable required) or to your smartphone where you can always keep an eye on the status of your device with the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Thresholds to trigger and reset low battery alarms + Thresholds to turn off and restart at low battery voltage levels + Output voltage 210 - 245V + Thresholds to turn off and restart at low battery voltage levels + Frequency 50 Hz or 60 Hz + Threshold for ECO mode on/off and ECO mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable default setting: every 2.5 seconds). if the load exceeds a preset threshold during this time, the inverter remains switched on. Proven reliability of the current inverter: Full bypassing in addition with a ring transformer topology has been proven for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or ambient temperature). High inrush power: This is needed to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Remote on/off switching possible: a remote on/off switch can be connected with a two-pole plug or between the positive pole of the battery and the left contact of the two-pole plug. Scope of delivery:1x Victron pin121800200 Phoenix 12/800 12v to 230v 700w 50Hz 60Hz

The Victron Phoenix 24/375 VE.Direct (MPN PIN243750200) is a small sine inverter with a constant output of 300W. It converts a 24V DC voltage into 230V AC with pure sine wave, suitable to supply even sensitive electronic devices.Its efficiency level is very high and thanks to the integrated ECO-mode one of the highest in this class. Via the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone which allows the configuration of various system parameters, for example the switch-on and switch-off voltage at low battery charge.Other adjustments like output frequency or voltage as well as a bipolar alarm-contact are only some of this inverter's features. The performance range of the Phoenix series VE.Direct 250-500 at this price is unique on the market and exceeds the abilities of other devices of this performance class enormously. Technical data: 300W constant output at 230V 50Hz sine voltage for 24V battery voltage, works with all common battery types 230V AC current with pure sine wave provides perfect current quality freely programmable switch-on7off threshold adjustable output voltage from 210 - 245V Technical highlights of the Phoenix VE.Direct series 250VA – 500VA 24V VE.Direct output allows the connection of the inverter to a computer (VE.Direct-to-USB cable needed) or your smartphone - together with the free Victron app it is possible to always keep an eye on your device (VE.Direct Bluetooth Smart Dongle needed) Fully programmable parameters: thresholds for activating or resetting alarms at low battery charge + thresholds for activating or restarting at low battery voltage + output voltage 210 - 245V + frequency of 50Hz or 60Hz + thresholds for ECO-mode on/off and ECO-mode sensor Integrated ECO-mode: In this mode the inverter switches to standby as soon as the load falls under a predefined value. In standby-mode the inverter reactivates for a short time (adjustable default setting: every 2.5s). If the load exceeds a predefined threshold the inverter stays activated. Proven reliability of this inverter:The full override via a torodial transformer topology has often proven itself over the last years. This inverters are save from short-circuits and overheating (caused by overload or ambient temperature).High starting performance: This is needed to activate loads like LED-drivers, halogen lamps or electrical tools.Remote controlled on/off-switching possible: A remote on/off-switch can be installed via a bipolar plug between the battery's +-pole and the left contact of the plug. Delivery scope:1x Victron PIN243750200 Phoenix 24/375 24V to 230V 300W 50Hz 60Hz

The Victron Phoenix 24/500 VE.Direct (MPN PIN245010200) is a small sine inverter with a constant output of 400W. It converts a 24V DC voltage into 230V AC with pure sine wave, suitable to supply even sensitive electronic devices.Its efficiency level is very high and thanks to the integrated ECO-mode one of the highest in this class. Via the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone which allows the configuration of various system parameters, for example the switch-on and switch-off voltage at low battery charge.Other adjustments like output frequency or voltage as well as a bipolar alarm-contact are only some of this inverter's features. The performance range of the Phoenix series VE.Direct 250-500 at this price is unique on the market and exceeds the abilities of other devices of this performance class enormously. Technical data: 400W constant output at 230V 50Hz sine voltage for 24V battery voltage, works with all common battery types 230V AC current with pure sine wave provides perfect current quality freely programmable switch-on7off threshold adjustable output voltage from 210 - 245V Technical highlights of the Phoenix VE.Direct series 250VA – 500VA 24V VE.Direct output allows the connection of the inverter to a computer (VE.Direct-to-USB cable needed) or your smartphone - together with the free Victron app it is possible to always keep an eye on your device (VE.Direct Bluetooth Smart Dongle needed) Fully programmable parameters: thresholds for activating or resetting alarms at low battery charge + thresholds for activating or restarting at low battery voltage + output voltage 210 - 245V + frequency of 50Hz or 60Hz + thresholds for ECO-mode on/off and ECO-mode sensor Integrated ECO-mode: In this mode the inverter switches to standby as soon as the load falls under a predefined value. In standby-mode the inverter reactivates for a short time (adjustable default setting: every 2.5s). If the load exceeds a predefined threshold the inverter stays activated. Proven reliability of this inverter:The full override via a torodial transformer topology has often proven itself over the last years. This inverters are save from short-circuits and overheating (caused by overload or ambient temperature).High starting performance: This is needed to activate loads like LED-drivers, halogen lamps or electrical tools.Remote controlled on/off-switching possible: A remote on/off-switch can be installed via a bipolar plug between the battery's +-pole and the left contact of the plug. Delivery scope:1x Victron PIN245010200 Phoenix 24/500 24V to 230V 400W 50Hz 60Hz

The Victron Phoenix 12/250 VE.Direct (PIN122510200) is a small sine inverter with a constant output of 200W. It converts a 12V DC voltage into 230V AC with pure sine wave, suitable to supply even sensitive electronic devices.Its efficiency level is very high and thanks to the integrated ECO-mode one of the highest in this class. Via the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone which allows the configuration of various system parameters, for example the switch-on and switch-off voltage at low battery charge.Other adjustments like output frequency or voltage as well as a bipolar alarm-contact are only some of this inverter's features. The performance range of the Phoenix series VE.Direct 250-500 at this price is unique on the market and exceeds the abilities of other devices of this performance class enormously. Technical data: 200W constant output at 230V 50Hz sine voltage for 12V battery voltage, works with all common battery types 230V AC current with pure sine wave provides perfect current quality freely programmable switch-on7off threshold adjustable output voltage from 210 - 245V Technical highlights of the Phoenix VE.Direct series 250VA – 500VA 48V VE.Direct output allows the connection of the inverter to a computer (VE.Direct-to-USB cable needed) or your smartphone - together with the free Victron app it is possible to always keep an eye on your device (VE.Direct Bluetooth Smart Dongle needed) Fully programmable parameters: thresholds for activating or resetting alarms at low battery charge + thresholds for activating or restarting at low battery voltage + output voltage 210 - 245V + frequency of 50Hz or 60Hz + thresholds for ECO-mode on/off and ECO-mode sensor Integrated ECO-mode: In this mode the inverter switches to standby as soon as the load falls under a predefined value. In standby-mode the inverter reactivates for a short time (adjustable default setting: every 2.5s). If the load exceeds a predefined threshold the inverter stays activated. Proven reliability of this inverter:The full override via a torodial transformer topology has often proven itself over the last years. This inverters are save from short-circuits and overheating (caused by overload or ambient temperature).High starting performance: This is needed to activate loads like LED-drivers, halogen lamps or electrical tools.Remote controlled on/off-switching possible: A remote on/off-switch can be installed via a bipolar plug between the battery's +-pole and the left contact of the plug. Delivery scope:1x Victron PIN122510200 Phoenix 12/250 12V to 230V 200W 50Hz 60Hz

The Victron Phoenix 24/250 VE.Direct (MPN PIN242510200) is a small sine inverter with a constant output of 200W. It converts a 24V DC voltage into 230V AC with pure sine wave, suitable to supply even sensitive electronic devices.Its efficiency level is very high and thanks to the integrated ECO-mode one of the highest in this class. Via the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone which allows the configuration of various system parameters, for example the switch-on and switch-off voltage at low battery charge.Other adjustments like output frequency or voltage as well as a bipolar alarm-contact are only some of this inverter's features. The performance range of the Phoenix series VE.Direct 250-500 at this price is unique on the market and exceeds the abilities of other devices of this performance class enormously. Technical data: 200W constant output at 230V 50Hz sine voltage for 24V battery voltage, works with all common battery types 230V AC current with pure sine wave provides perfect current quality freely programmable switch-on7off threshold adjustable output voltage from 210 - 245V Technical highlights of the Phoenix VE.Direct series 250VA – 500VA 24V VE.Direct output allows the connection of the inverter to a computer (VE.Direct-to-USB cable needed) or your smartphone - together with the free Victron app it is possible to always keep an eye on your device (VE.Direct Bluetooth Smart Dongle needed) Fully programmable parameters: thresholds for activating or resetting alarms at low battery charge + thresholds for activating or restarting at low battery voltage + output voltage 210 - 245V + frequency of 50Hz or 60Hz + thresholds for ECO-mode on/off and ECO-mode sensor Integrated ECO-mode: In this mode the inverter switches to standby as soon as the load falls under a predefined value. In standby-mode the inverter reactivates for a short time (adjustable default setting: every 2.5s). If the load exceeds a predefined threshold the inverter stays activated. Proven reliability of this inverter:The full override via a torodial transformer topology has often proven itself over the last years. This inverters are save from short-circuits and overheating (caused by overload or ambient temperature).High starting performance: This is needed to activate loads like LED-drivers, halogen lamps or electrical tools.Remote controlled on/off-switching possible: A remote on/off-switch can be installed via a bipolar plug between the battery's +-pole and the left contact of the plug. Delivery scope:1x Victron PIN242510200 Phoenix 24/250 24V to 230V 200W 50Hz 60Hz

The Victron Phoenix 48/500VE.Direct (MPN PIN485010200) is a small sine inverter with a constant output of 400W. It converts a 48V DC voltage into 230V AC with pure sine wave, suitable to supply even sensitive electronic devices.Its efficiency level is very high and thanks to the integrated ECO-mode one of the highest in this class. Via the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone which allows the configuration of various system parameters, for example the switch-on and switch-off voltage at low battery charge.Other adjustments like output frequency or voltage as well as a bipolar alarm-contact are only some of this inverter's features. The performance range of the Phoenix series VE.Direct 250-500 at this price is unique on the market and exceeds the abilities of other devices of this performance class enormously. Technical data: 400W constant output at 230V 50Hz sine voltage for 48V battery voltage, works with all common battery types 230V AC current with pure sine wave provides perfect current quality freely programmable switch-on7off threshold adjustable output voltage from 210 - 245V Technical highlights of the Phoenix VE.Direct series 250VA – 500VA 48V VE.Direct output allows the connection of the inverter to a computer (VE.Direct-to-USB cable needed) or your smartphone - together with the free Victron app it is possible to always keep an eye on your device (VE.Direct Bluetooth Smart Dongle needed) Fully programmable parameters: thresholds for activating or resetting alarms at low battery charge + thresholds for activating or restarting at low battery voltage + output voltage 210 - 245V + frequency of 50Hz or 60Hz + thresholds for ECO-mode on/off and ECO-mode sensor Integrated ECO-mode: In this mode the inverter switches to standby as soon as the load falls under a predefined value. In standby-mode the inverter reactivates for a short time (adjustable default setting: every 2.5s). If the load exceeds a predefined threshold the inverter stays activated. Proven reliability of this inverter:The full override via a torodial transformer topology has often proven itself over the last years. This inverters are save from short-circuits and overheating (caused by overload or ambient temperature).High starting performance: This is needed to activate loads like LED-drivers, halogen lamps or electrical tools.Remote controlled on/off-switching possible: A remote on/off-switch can be installed via a bipolar plug between the battery's +-pole and the left contact of the plug. Delivery scope:1x Victron PIN485010200 Phoenix 48/500 48V to 230V 400W 50Hz 60Hz

The Victron Phoenix 24/800VE.Direct (mpn pin241800200) is a small sine wave inverter with 700w continuous power. The unit converts 24v dc from your battery to 230v ac ac with a pure sine wave voltage and uncompromising power quality that is ideal for sensitive electronic products trend-setting efficiency and modern system communicationThe efficiency of the Phoenix is outstanding and one of the highest in its class thanks to the ECO mode. using the VE.Direct communication port with optional accessories, you can connect the device to a computer or smartphone and program some system parameters such as the switch-off voltage and switch-on voltage when the battery is empty completely freely! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter The performance range of the Phoenix series VE.Direct 24/800 is unique on the market at the moment for the price and goes far beyond the capabilities of other devices in the same performance classes.technical features of the Phoenix 24/800 VE.Direct 700 watts continuous power at 230v 50Hz sine wave voltage 800 watts continuous power at non-linear load full control over almost all system parameters suitable for all common 24v batteries 230v ac power with pure sine wave provides perfect power quality free programmable on and off thresholds freely adjustable output voltage in the range of 210 - 245V technical highlights of the Phoenix VE.Direct series 250va - 800VA VE.Direct connection allows you to connect the power converter to a computer (VE.Direct to USB interface cable required) or to your smartphone where you can always keep an eye on the status of your device with the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Thresholds to trigger and reset low battery alarms + Thresholds to turn off and restart at low battery voltage levels + Output voltage 210 - 245V + Thresholds to turn off and restart at low battery voltage levels + Frequency 50 Hz or 60 Hz + Threshold for ECO mode on/off and ECO mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable default setting: every 2.5 seconds). if the load exceeds a preset threshold, the inverter remains switched on Proven reliability of the current inverter: Full bypassing in addition with a ring transformer topology has been proven for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or ambient temperature) High inrush power: This is needed to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools Remote on/off switching possible: a remote on/off switch can be connected with a two-pole plug or between the positive pole of the battery and the left contact of the two-pole plug Scope of delivery:1x Victron pin241800200 Phoenix 24/800 24v to 230v 700w 50Hz 60Hz

The Victron Phoenix 48/1200VE.Direct (mpn pin482120200) is a small sine wave inverter with 1200w continuous power. The unit converts 48v DC from your battery to 230v ac AC with a pure sine wave voltage and uncompromising power quality that is ideal for sensitive electronic products trend-setting efficiency and modern system communicationThe efficiency of the Phoenix is outstanding and one of the highest in its class thanks to the ECO mode. using the VE.Direct communication port with optional accessories, you can connect the device to a computer or smartphone and program some system parameters such as the switch-off voltage and switch-on voltage when the battery is empty completely freely! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter The performance range of the Phoenix series VE.Direct 48/1200 is unique on the market at the moment for the price and goes far beyond the capabilities of other devices in the same performance classes.technical features of the Phoenix 48/1200 VE.Direct 1000 watts continuous power at 230v 50Hz sine wave voltage 1200 watts continuous power at non-linear load full control over almost all system parameters suitable for all common batteries with 48v battery voltage 230v ac power with pure sine wave provides perfect power quality free programmable on and off thresholds freely adjustable output voltage in the range of 210 - 245V technical highlights of the Phoenix VE.Direct series 250va - 1200VA VE.Direct connection allows you to connect the power converter to a computer (VE.Direct to USB interface cable required) or to your smartphone where you can always keep an eye on the status of your device with the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Thresholds to trigger and reset low battery alarms + Thresholds to turn off and restart at low battery voltage levels + Output voltage 210 - 245V + Thresholds to turn off and restart at low battery voltage levels + Frequency 50 Hz or 60 Hz + Threshold for ECO mode on/off and ECO mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable default setting: every 2.5 seconds). if the load exceeds a preset threshold, the inverter remains switched on Proven reliability of the current inverter: Full bypassing in addition with a ring transformer topology has been proven for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or ambient temperature) High inrush power: This is needed to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools Remote on/off switching possible: a remote on/off switch can be connected with a two-pole plug or between the positive pole of the battery and the left contact of the two-pole plug Scope of delivery:1x Victron pin482120200 Phoenix 48/1200 48v to 230v 1000w 50Hz 60Hz

The Victron Phoenix 48/375VE.Direct (MPN PIN483750200) is a small sine inverter with a constant output of 300W. It converts a 48V DC voltage into 230V AC with pure sine wave, suitable to supply even sensitive electronic devices.Its efficiency level is very high and thanks to the integrated ECO-mode one of the highest in this class. Via the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone which allows the configuration of various system parameters, for example the switch-on and switch-off voltage at low battery charge.Other adjustments like output frequency or voltage as well as a bipolar alarm-contact are only some of this inverter's features. The performance range of the Phoenix series VE.Direct 250-500 at this price is unique on the market and exceeds the abilities of other devices of this performance class enormously. Technical data: 300W constant output at 230V 50Hz sine voltage for 48V battery voltage, works with all common battery types 230V AC current with pure sine wave provides perfect current quality freely programmable switch-on7off threshold adjustable output voltage from 210 - 245V Technical highlights of the Phoenix VE.Direct series 250VA – 500VA 48V VE.Direct output allows the connection of the inverter to a computer (VE.Direct-to-USB cable needed) or your smartphone - together with the free Victron app it is possible to always keep an eye on your device (VE.Direct Bluetooth Smart Dongle needed) Fully programmable parameters: thresholds for activating or resetting alarms at low battery charge + thresholds for activating or restarting at low battery voltage + output voltage 210 - 245V + frequency of 50Hz or 60Hz + thresholds for ECO-mode on/off and ECO-mode sensor Integrated ECO-mode: In this mode the inverter switches to standby as soon as the load falls under a predefined value. In standby-mode the inverter reactivates for a short time (adjustable default setting: every 2.5s). If the load exceeds a predefined threshold the inverter stays activated. Proven reliability of this inverter:The full override via a torodial transformer topology has often proven itself over the last years. This inverters are save from short-circuits and overheating (caused by overload or ambient temperature).High starting performance: This is needed to activate loads like LED-drivers, halogen lamps or electrical tools.Remote controlled on/off-switching possible: A remote on/off-switch can be installed via a bipolar plug between the battery's +-pole and the left contact of the plug. Delivery scope:1x Victron PIN483750200 Phoenix 48/375 48V to 230V 300W 50Hz 60Hz

The Victron Phoenix 24/1200VE.Direct (mpn pin242120200) is a small sine wave inverter with 1000w continuous power. The device converts 24v dc from your battery to 230v ac ac with a pure sine wave voltage and uncompromising power quality that is ideal for sensitive electronic products trend-setting efficiency and modern system communicationThe efficiency of the Phoenix is outstanding and one of the highest in its class thanks to the ECO mode. using the VE.Direct communication port with optional accessories, you can connect the device to a computer or smartphone and program some system parameters such as the switch-off voltage and switch-on voltage when the battery is empty completely freely! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter The performance range of the Phoenix series VE.Direct 24/1200 is unique on the market at the moment for the price and goes far beyond the capabilities of other devices in the same performance classes.technical features of the Phoenix 1241200 VE.Direct 1000 watts continuous power at 230v 50Hz sine wave voltage 1200 watts continuous power at non-linear load full control over almost all system parameters suitable for all common 24v batteries 230v ac power with pure sine wave provides perfect power quality free programmable on and off thresholds freely adjustable output voltage in the range of 210 - 245V technical highlights of the Phoenix VE.Direct series 250va - 1200VA VE.Direct connection allows you to connect the power converter to a computer (VE.Direct to USB interface cable required) or to your smartphone where you can always keep an eye on the status of your device with the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Thresholds to trigger and reset low battery alarms + Thresholds to turn off and restart at low battery voltage levels + Output voltage 210 - 245V + Thresholds to turn off and restart at low battery voltage levels + Frequency 50 Hz or 60 Hz + Threshold for ECO mode on/off and ECO mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable default setting: every 2.5 seconds). if the load exceeds a preset threshold, the inverter remains switched on Proven reliability of the current inverter: Full bypassing in addition with a ring transformer topology has been proven for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or ambient temperature) High inrush power: This is needed to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools Remote on/off switching possible: a remote on/off switch can be connected with a two-pole plug or between the positive pole of the battery and the left contact of the two-pole plug Scope of delivery:1x Victron pin242120200 Phoenix 24/1200 24v to 230v 1000w 50Hz 60Hz

Der Victron Phoenix 48/800VE.Direct (MPN PIN481800200) ist ein kleiner Sinuswechselrichter mit 650W Dauerleistung. Das Gerät wandelt 48V Gleichspannung aus Ihrer Batterie in 230V AC Wechselstrom um und das mit einer reinen Sinusspannung und kompromissloser Strom-Qualität, die auch für empfindliche Elektronik-Produkte bestens geeignet ist. richtungsweisender Wirkungsgrad und moderne SystemkommunikationDer Wirkungsgrad des Phoenix ist hervorragend und dank des ECO-Mode einer der höchsten seiner Klasse. Über den VE.Direct Kommunikationsanschluss können Sie mit optionalen Zubehör, das Gerät mit einem Computer oder dem Smartphone verbinden und einige Systemparameter wie die Ausschaltspannung und Wiedereinschaltspannung bei leerem Akku völlig frei programmieren! Viele weitere Konfigurationsmöglichkeiten wie Ausgangsfrequenz und Ausgangsspannung sowie ein 2-poliger Alarm-Kontakt gehören zu den Leistungsmerkmalen dieses Spannungs-Umformers. Der Leistungsumfang der Phoenix-Serie VE.Direct 250-800 ist für den Preis im Moment einmalig am Markt und geht weit über die Fähigkeiten anderer Geräte der gleichen Leistungsklassen hinaus.technische Merkmale des Phoenix 48/800 VE.Direct 650 Watt Dauerleistung bei 230V 50Hz Sinusspannung 800 Watt Dauerleistung bei nicht linearer Last volle Kontrolle über fast alle Systemparameter für alle gängigen 48V Batterien geeignet 230V AC Strom mit reiner Sinuswelle liefert eine perfekte  Stromqualität frei programmierbare Ein- und Ausschaltschwellen frei einstellbare Ausgangsspannung im Bereich von 210 – 485V technische Highlights der Phoenix VE.Direct Serie 250VA – 800VA VE.Direct-Anschluss ermöglicht die Verbindung des Stromwandlers mit einen Computer (VE.Direct zu USB-Interface Kabel benötigt) oder Ihrem Smartphone auf dem Sie mit der kostenlosen Victron App den Status Ihres Gerätes immer im Auge behalten (VE.Direct Bluetooth Smart Dongle erforderlich). Vollständig programmierbare Parameter: Schwellwerte zum Auslösen und Zurücksetzen von Alarmen bei niedrigem Ladezustand der Batterie + Schwellwerte zum Ausschalten und Neustarten bei niedrigen Batteriespannungswerten + Ausgangsspannung 210 - 485V  + Schwellwerte zum Ausschalten und Neustarten bei niedrigen Batteriespannungswerten + Frequenz 50 Hz oder 60 Hz + Schwellwert für ECO-Modus ein/aus und ECO-Modus-Fühler ECO-Modus integriert: Im ECO-Modus schaltet der Wechselrichter auf Standby, sobald die Last unter einen voreingestellten Wert abfällt. Im Standby-Modus schaltet sich der Wechselrichter dann für einen kurzen Zeitraum ein (regulierbare Standardeinstellung: alle 2,5 Sekunden). Überschreitet dabei die Last einen voreingestellten Schwellwert, bleibt der Wechselrichter eingeschaltet. Bewährte Zuverlässigkeit des Stromumwandlers: Die vollständige Überbrückung zusätzlich mit einer Ringtransformatorentopologie hat sich seit Jahren bewährt. Die Wechselrichter sind kurzschlussfest und vor Überhitzung (ob nun durch Überlastung oder durch die Umgebungstemperatur hervorgerufen) geschützt. Hohe Einschaltleistung: Diese wird zum Einschalten von Lasten wie zum Beispiel Spannungsumformern für LED-Lampen, Halogenlampen oder Elektrowerkzeugen benötigt. Ferngesteuerte Ein-/Aus-Schaltung möglich: Ein ferngesteuerter Ein-/Aus-Schalter lässt sich mit einem zweipoligen Stecker oder zwischen den Pluspol der Batterie und dem linken Kontakt des zweipoligen Steckers anschließen. Lieferumfang:1x Victron PIN481800200 Phoenix 48/800 48V auf 230V 700W 50Hz 60Hz

The Victron Phoenix 48/250 VE.Direct (MPN PIN482510200) is a small sine inverter with a constant output of 200W. It converts a 48V DC voltage into 230V AC with pure sine wave, suitable to supply even sensitive electronic devices.Its efficiency level is very high and thanks to the integrated ECO-mode one of the highest in this class. Via the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone which allows the configuration of various system parameters, for example the switch-on and switch-off voltage at low battery charge.Other adjustments like output frequency or voltage as well as a bipolar alarm-contact are only some of this inverter's features. The performance range of the Phoenix series VE.Direct 250-500 at this price is unique on the market and exceeds the abilities of other devices of this performance class enormously. Technical data: 200W constant output at 230V 50Hz sine voltage for 48V battery voltage, works with all common battery types 230V AC current with pure sine wave provides perfect current quality freely programmable switch-on7off threshold adjustable output voltage from 210 - 245V Technical highlights of the Phoenix VE.Direct series 250VA – 500VA 48V VE.Direct output allows the connection of the inverter to a computer (VE.Direct-to-USB cable needed) or your smartphone - together with the free Victron app it is possible to always keep an eye on your device (VE.Direct Bluetooth Smart Dongle needed) Fully programmable parameters: thresholds for activating or resetting alarms at low battery charge + thresholds for activating or restarting at low battery voltage + output voltage 210 - 245V + frequency of 50Hz or 60Hz + thresholds for ECO-mode on/off and ECO-mode sensor Integrated ECO-mode: In this mode the inverter switches to standby as soon as the load falls under a predefined value. In standby-mode the inverter reactivates for a short time (adjustable default setting: every 2.5s). If the load exceeds a predefined threshold the inverter stays activated. Proven reliability of this inverter:The full override via a torodial transformer topology has often proven itself over the last years. This inverters are save from short-circuits and overheating (caused by overload or ambient temperature).High starting performance: This is needed to activate loads like LED-drivers, halogen lamps or electrical tools.Remote controlled on/off-switching possible: A remote on/off-switch can be installed via a bipolar plug between the battery's +-pole and the left contact of the plug. Delivery scope:1x Victron PIN482510200 Phoenix 48/250 48V to 230V 200W 50Hz 60Hz

The Victron Phoenix 24/1200VE.Direct (mpn pin242120200) is a small sine wave inverter with 1000w continuous power. The device converts 24v DC from your battery to 230v ac AC with a pure sine wave voltage and uncompromising power quality that is ideal for sensitive electronic products. trend-setting efficiency and modern system communication The efficiency of the Phoenix is outstanding and one of the highest in its class thanks to the ECO mode. using the VE.Direct communication port with optional accessories, you can connect the device to a computer or smartphone and program some system parameters such as the switch-off voltage and switch-on voltage when the battery is empty completely freely! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter. The performance range of the Phoenix series VE.Direct 24/1200 is unique on the market at the moment for the price and goes far beyond the capabilities of other devices in the same performance classes. technical features of the Phoenix 1241200 VE.Direct 1000 watts continuous power at 230v 50Hz sine wave voltage 1200 watts continuous power at non-linear load full control over almost all system parameters suitable for all common 24v batteries 230v ac power with pure sine wave provides perfect power quality free programmable on and off thresholds freely adjustable output voltage in the range of 210 - 245V technical highlights of the Phoenix VE.Direct series 250va - 1200VA VE.Direct connector allows you to connect the power converter to a computer (VE.Direct to USB interface cable required) or your smartphone where you can always keep an eye on the status of your device with the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Thresholds to trigger and reset low battery alarms + Thresholds to turn off and restart at low battery voltage levels + Output voltage 210 - 245V + Thresholds to turn off and restart at low battery voltage levels + Frequency 50 Hz or 60 Hz + Threshold for ECO mode on/off and ECO mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable default setting: every 2.5 seconds). if the load exceeds a preset threshold, the inverter remains switched on. Proven reliability of the current inverter: Full bypassing in addition with a ring transformer topology has been proven for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or ambient temperature). High inrush power: This is needed to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Remote on/off switching possible: A remote on/off switch can be connected with a two-pole plug or between the positive pole of the battery and the left contact of the two-pole plug. Scope of delivery: 1x Victron pin242120200 Phoenix 24/1200 24v to 230v 1000w 50Hz 60Hz