The ic-24/3000/100/80 from Offgridtec (mpn 013700) is a new device combination that combines an inverter, battery charger and mppt charge controller. The device is ideally suited for energy storage devices as it integrates charging from the grid and from solar energy, as well as AC output. The powerful multi-core chip in the product with the advanced control algorithm enables intelligent management of the system. The device is suitable for battery systems with 24v voltage and battery types agm, gel, fld and LiFePO4. The integrated PFC technology achieves a high power factor of ac-dc charges and reduces grid capacity usage Key features: Fully intelligent digital energy storage equipment Advanced MPP tracking technology Fully digitally controlled ac-dc charging modules High output voltage stability Three charging modes and two output modes LCD display to show various system parameters Multiple LED indicators for dynamic status display Supports cold and soft start RS485 isolated communication interface Optional BMS link connection Various modes for a wide range of applications The device has a total of three charging modes. Solar priority can be set, a combination of utility and solar modes, or solar-only mode. AC output modes can be selected between utility and inverter priority. In order to maximize the solar energy utilization, the user can select the energy sources according to the actual demand and use the utility flexibly as a supplement. The IC unit can increase the guaranteed power supply rate of the system, which is suitable for solar power, utility/oil generator hybrid systems. Technical features ic-24/3000/100/80: Suitable for battery voltage: 24 V/DC Battery input voltage range: 21.6 - 32 V/DC Protection class: IP30 Rel. humidity: <95% (N.C.) Operating ambient temperature: -20°C - +50°C (full input and output power) Dimensions: 642.5 x 381.6 x 149 mm Weight: 19 kg Inverter with 3000w continuous power DC-AC inverter module is based on fully digital and intelligent design. It uses advanced SPWM technology, outputs a pure sine wave and converts 24v/DC to 220/230v/ac. The module is suitable for AC loads of home appliances, power tools, electronic audio and video equipment and many other applications. Thanks to the innovative voltage, current and power control with multiple control loops, the device has a good dynamic response, high resistance to voltage spikes and high operational reliability. Technical features: Continuous output power: 3000w Peak power (3s): 6000W Output voltage range: 220v -6%~+3% / 230v -10%~+3% Output frequency: 50/60 ±0.2Hz Output wave: Pure sine wave Max. Rated power efficiency: 91% Mains to inverter transfer time: 10ms Transfer time inverter to mains: 15ms mppt charge controller with 100a max. PV charge current The charge controller module uses the latest optimized mppt technology. This process can help maximize the solar yield by ensuring the charge controller always gets the maximum out of the solar module power curve in changing conditions. Technical features: Max. PV open circuit voltage: 450v (at min. operating ambient temperature) Max. PV open circuit voltage: 395v (at 25°C ambient temperature) Max. PV input power: 4000W Max. PV charging current: 100a Tracking efficiency: >99.5% Temperature compensation coefficient: -3mV /°C / 2v (default) Battery charger with 80a max. charge current The ac-dc charger features a fully digital double control loop and has high response speed and stability. A wide ac input voltage and charging current limit can be set. This module has full input and output protection functions. With utility bypass charging function, the module can supply power to the load directly and charge the battery at the same time. Technical features: Utility power supply input voltage: 176 - 246 v/ac (standard) Input frequency of the supply network: 40 - 65 Hz Max. Mains charging current: 80a Extensive protection functions The IC device series has a wide range of protective functions: PV limit current & reverse polarity Reverse current at night AC-IN over- & undervoltage Utility input over current Battery overvoltage & overdischarge, and polarity reversal Load output short circuit & overload Device overheating Scope of delivery: 1x Offgridtec ic-24/3000/100/80 device combination 1x instruction manual

The ic-12/800/30/20 from Offgridtec (mpn 013695) is a new device combination that combines an inverter, battery charger and mppt charge controller. The device is ideally suited for energy storage devices as it integrates charging from the grid and from solar energy, as well as AC output. The powerful multi-core chip in the product with the advanced control algorithm enables intelligent management of the system. The device is suitable for battery systems with 12v voltage and lead-acid battery type (lead-acid, vrla-agm, -gel). Furthermore, the ic offers the function of adjusting the charging ratio of mains supply and Solaranlagen for different applications. Important features: Fully intelligent digital energy storage equipment Advanced MPP tracking technology Fully digitally controlled ac-dc charging modules High output voltage stability Four charging modes and two output modes LCD display to show various system parameters Supports cold and soft start RS485 isolated communication interface Different modes for various applications The device has a total of four charging modes. Priority can be set for mains operation or solar operation, a combination of mains and solar operation or pure solar operation. The output modes can be selected between battery and power supply. Technical features ic-12/800/30/20: Suitable for battery voltage: 12 V/DC Battery input voltage range: 10.8 - 16 V/DC Protection class: IP30 Rel. humidity: <95% (N.C.) Operating ambient temperature: -20°C - +50°C (full input and output power) Dimensions: 386 x 300 x 126 mm Weight: 7.3 kg Inverter with 800w continuous power DC-AC inverter module is based on fully digital and intelligent design. It uses advanced SPWM technology, outputs a pure sine wave and converts 12v/DC to 220/230v/ac. The module is suitable for AC loads of home appliances, power tools, electronic audio and video equipment and many other applications. Thanks to the innovative voltage, current and power control with multiple control loops, the device has a good dynamic response, high resistance to voltage spikes and high operational reliability. Technical features: Continuous output power: 800w Output power (15min): 1000W overload output power (5s): 1600W Max. Surge power: 2000W Output voltage range: 220v -6%~+5% / 230v -10%~+5% Output frequency: 50/60 ±0.1Hz Output mode: Single phase Output wave: Pure sine wave Max. Efficiency: 91% Transfer time: 20ms (resistive load) mppt charge controller with 30a max. PV charge current The charge controller module uses the latest optimized mppt technology. This process can help maximize the solar yield by ensuring the charge controller always gets the maximum out of the solar module power curve in changing conditions. Technical features: Max. PV open circuit voltage: 60v (at min. operating ambient temperature) Max. PV open circuit voltage: 46v (at 25°C ambient temperature) Max. PV input power: 390W Max. PV charging current: 30a Charging conversion efficiency: <98% Temperature compensation coefficient: -3mV /°C / 2v (default) Battery charger with 20a max charge current The ac-dc charger features a fully digital double control loop and has high response speed and stability. A wide ac input voltage and charging current limit can be set. This module has full input and output protection functions. With utility bypass charging function, the module can supply power to the load directly and charge the battery at the same time. Technical features: Suitable for battery voltage: 12v/DC Operating voltage range: 160v/AC~280V/AC Starting voltage range: 170V/AC~270V/AC Max. Charging current: 20a Extensive protection functions The ic device series has a wide range of protective functions: PV limit current, -short circuit, -polarity reversal Reverse current blocking AC-IN over & under voltage Battery Overvoltage & Overdischarge Load output short circuit & overload Device overheating Scope of delivery: 1x Offgridtec ic-12/800/30/20 device combination

The ic-48/5000/80/90 from Offgridtec (mpn 013705) is a new device combination that combines an inverter, battery charger and mppt charge controller. The device is ideally suited for energy storage devices as it integrates charging from the grid and from solar energy, as well as AC output. The powerful multi-core chip in the product with the advanced control algorithm enables intelligent management of the system. The device is suitable for battery systems with 48v voltage and battery types agm, gel, fld and LiFePO4. The integrated PFC technology achieves a high power factor of ac-dc charges and reduces grid capacitance usage Key features: Fully intelligent digital energy storage equipment Advanced MPP tracking technology Fully digitally controlled ac-dc charging modules High output voltage stability Three charging modes and two output modes LCD display to show various system parameters Multiple LED indicators for dynamic status display Supports cold and soft start RS485 isolated communication interface Optional BMS link connection Various modes for a wide range of applications The device has a total of three charging modes. Solar priority can be set, a combination of utility and solar modes, or solar-only mode. AC output modes can be selected between utility and inverter priority. In order to maximize the solar energy utilization, the user can select the energy sources according to the actual demand and use the utility flexibly as a supplement. The IC unit can increase the guaranteed power supply rate of the system, which is suitable for solar power, utility/oil generator hybrid systems. Technical features IC-48/5000/80/60: Suitable for battery voltage: 48V/DC Battery input voltage range: 43.2-64 V/DC Protection class: IP30 Rel. humidity: <95% (N.C.) Operating ambient temperature: -20°C - +50°C (full input and output power) Dimensions: 642.5 x 381.6 x 149 mm Weight: 19 kg Inverter with 3000w continuous power DC-AC inverter module is based on fully digital and intelligent design. It uses advanced SPWM technology, outputs a pure sine wave and converts 24v/dc to 220/230v/ac. The module is suitable for AC loads of home appliances, power tools, electronic audio and video equipment and many other applications. Thanks to the innovative voltage, current and power control with multiple control loops, the device has a good dynamic response, high resistance to voltage spikes and high operational reliability. Technical features: Continuous output power: 5000W Peak power (3s): 8000W Output voltage range: 220v -6%~+3% / 230v -10%~+3% Output frequency: 50/60 ±0.2Hz Output wave: Pure sine wave Max. Rated power efficiency: 91% Mains to inverter transfer time: 10ms Transfer time inverter to mains: 15ms mppt charge controller with 80a max. PV charge current The charge controller module uses the latest optimized mppt technology. This process can help maximize the solar yield by ensuring the charge controller always gets the maximum out of the solar module power curve in changing conditions. Technical features: Max. PV open circuit voltage: 500v (at min. operating ambient temperature) Max. PV open circuit voltage: 440v (at 25°C ambient temperature) Max. PV input power: 4000W Max. PV charging current: 80a Tracking efficiency: >99.5% Temperature compensation coefficient: -3mV /°C / 2v (default) Battery charger with 60a max. charge current The ac-dc charger features a fully digital double control loop and has high response speed and stability. A wide ac input voltage and charging current limit can be set. This module has full input and output protection functions. With utility bypass charging function, the module can supply power to the load directly and charge the battery at the same time. Technical features: Utility power supply input voltage: 176 - 246 v/ac (standard) Input frequency of the supply network: 40 - 65 Hz Max. Mains charging current: 60a Extensive protection functions The IC device series has a wide range of protective functions: PV limit current & reverse polarity Reverse current at night AC-IN over- & undervoltage Utility input over current Battery overvoltage & overdischarge, and polarity reversal Load output short circuit & overload Device overheating Scope of delivery: 1x Offgridtec ic-24/3000/100/80 device combination 1x instruction manual