The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands placed on a solar accumulator today. Maximum safety and a long service life are guaranteed even with regular deep discharge thanks to the latest technology. The latest battery of the market-leading manufacturer with now 3.5 kWh per module has again a battery management system (bms) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters. Features Extremely cycle resistant - over 6000 cycles at 95% DoD More usable energy content than the previous model US3000 Lifetime over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging power possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharge overvoltage during charging excessive currents during charging and discharging over and under temperature Short circuit and reverse polarity Constant monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS. High cycle life The extremely high cycle life of the installed LiFePo4 cells make Pylontech us3000c modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-connected or stand-alone, the Pylontech storage system offers several advantages over typical lead-acid batteries and other lithium technologies. Technical data Battery Type: Lithium Iron Phosphate (LiFePo4) Rated voltage: 48V Rated capacity: 3552 Wh Usable capacity (95% DoD): 3374 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 90A Max. (Discharge) charging current: 74A Recommended charge/discharge current: 37A Communication: rs485, CAN Weight: 32 kg Dimensions: 442 x 420 x 132 mm Protection class: IP20 Temperature range charge: 0°C - +50°C Temperature range discharge: -10°C - +50°C Temperature range storage: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 years manufacturer warranty Certification: TÜV, ce, UN38.8 Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1x Pylontech us3000c LiFePO4 3.5 kWh 1x cable set parallel connection incl. grounding 1x rj45 data cable 1x mounting screws 1x user manual
From
€1,013.31*
From €851.52**
The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands...
The Pytes e-box 48100r-c (mpn 110402100007) is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, sophisticated design and impressive performance. The battery is compact, easy to install, maintenance-free and can be used as the basic building block of an energy storage system by connecting it in parallel. Applications range from self-consumption coverage in private homes to small commercial and industrial energy storage systems, as well as in telecommunication stations.The Pytes E-BoxLatest generation LFP storageOver 6000 cycles at 90% DoDIntelligent energy managementIdeal for emergency power supplyExtensive compatibilityModularly expandableCAN and rs485 communicationIntelligent energy managementThe intelligent Pytes battery offers a comprehensive energy management system. Through real-time measurements, monitoring and management, it optimizes the system service life using intelligent algorithms. The battery thus ensures efficient and sustainable use of the available energy.Reliable emergency power supplyThe simple installation and user-friendly design make Pytes batteries a practical option for ensuring an uninterrupted power supply in your home. With their intelligent control features, Pytes batteries can optimize energy consumption and maximize battery life to ensure your backup power supply is efficient and reliable.Long service life and maximum safetyPytes batteries are characterized by their impressive service life and high level of safety. With over 6000 cycles at 90% depth of discharge (dod), they offer an exceptionally long service life. Whether it is a grid-connected solar system or a self-sufficient stand-alone system, the Pytes storage system offers several clear advantages over conventional lead batteries and other lithium technologies.Technical dataBattery chemistry: Lithium iron phosphate (LFP)Nominal voltage: 51.2 VVoltage range: 47.5-57.6 VNominal power: 100 AhNominal energy: 5.12 kWhMax. Charging current: 50 AMax. Discharge: 50 ACharging temperature: 0~50°CDischarging temperature: -10~50°CEfficiency: =95%Communication protocol: rs-232, rs-485, CANCycle life: >6000 cycles at 90% DoDDimensions: 440 x 620 x 117 mmWeight: 51 kgScope of delivery:1x Pytes E-Box 48100r-c
€1,307.81*
€1,099.00**
The Pytes e-box 48100r-c (mpn 110402100007) is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, s...
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A variety of different board battery types can be charged via the primary charging output (BATT-1). The battery spectrum ranges from AGM, GEL and liquid lead acid to state-of-the-art LiFePO4 and Li-NiCoMn battery systems. The secondary battery charge output (BATT-2) is designed for a starter battery that is at the same voltage level as BATT-1. The unit automatically detects the system voltage of the starter battery (BATT-2) and charging of the BATT-2 begins as soon as the preset conditions are met.
The controller uses the advanced MPPT control algorithm that minimises the maximum power point loss rate and loss time, quickly tracks the maximum power point (MPP) of the PV generator, and processes the maximum energy from the PV generator under all conditions. Energy utilisation in a PV system with MPPT controller is increased by 20 to 30% compared to the PWM charging method.
Features Highlights of the MPPT Pro DUO 30 A
Max Power-Point Tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%.
Advanced MPPT control algorithm to minimise MPP loss rate and minimise time loss.
Higher range of MPP operating voltage to improve PV module utilisation.
Possibility of limiting the charging power by user or automatic charging current (BATT-1).
Digital circuit control of adaptive three-stage charging mode to improve BATT-1 lifetime.
The product will enter power saving mode if no manual input has been made for a long time and charging conditions are not met (PV<5v).>
100% charge and discharge in the operating temperature range.
AES control signal for auto-refrigerator to avoid energy waste.
Standard Modbus protocol and RS485 communication port (5V/200mA).
Overview of the most important technical features
Maximum charging current: 30A at a battery voltage of 12V or 24V.
Optional remote display with mounting frame available.
Supports all major battery types.
Active temperature equalisation for optimal charging and ensuring long battery life.
Max. Solar power 390W at 12V system voltage and 780W at 24V system voltage.
100V max. PV input voltage
Grounding: Negative
Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH)
Connection terminals Battery 1: 16mm² (AWG6) / Battery 2: 4mm² (AWG12)
Weight: 1,4KG
Diameter of mounting holes: 5mm
Energy consumption: 26mA at 12V / 15mA at 24V
Max. Efficiency: 98
Intelligent energy saver
If there is no manual operation for an extended period of time and charging conditions are not present, the MPPT-Pro Duo will switch to energy saving mode, reducing the unit's energy consumption to a minimum. This behaviour also reduces wear and tear on the unit, which is reflected in a significantly longer service life. The system parameters are displayed and set directly via the intuitive control panel on the controller or via the MT11 remote control (accessory).
System communication and protection functions
The refrigerator's AES control signal is built into the controller, which delivers excess solar power to the refrigerator to prevent energy waste. The protection class of the MPPT Duo is IP33. It resists splashing water and is dust-tight. Our MPPT Pro DUO has multiple protection functions, including battery overcharge protection, discharge protection and reverse polarity protection of PV and battery, which effectively ensure the safety, stability and service life of the solar system.
Scope of delivery:
1x Offgridtec 1-01-011200 MPPT DUO charge controller.
1x instruction manual
€111.84*
€93.98**
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A vari...
The Multiplus-II 48/3000/35-32 gx is a high-end device combination from victron Energy (mpn pmp482306000) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 50 a and the potential range of use to ess applications. The inverter module delivers a whopping 3000 w at non-linear load, or 2400 w at linear continuous load. the 48 v battery charger is also very well proportioned, with 35 a charging power, and is complemented by a 32 a transfer switch that allows lightning-fast switching between aC connections. Compared to the rest of the series, the gx variants have an integrated gx display with numerous other connection options. important features of the Multiplus-II 48/3000/35-32 gx integrated gx control unit with various communication ports PowerControl and Powerassist -increase of mains or generator performance built-in anti-islanding function and connection for external current sensor (optional) can be used as a backup device in grid-connected systems for power supply in case of grid failures can be used in various ess (Energy Storage System) applications best suited for professional seafaring, yachts, vehicles and land-based, off-grid applications vE.Bus interface for parallel and three-phase operation, remote monitoring and system integration virtually unlimited power through parallel and three-phase operation can be configured on-site or remotely using vEConfigure software* technical features 3000w power at non-linear load 2400 w continuous load and 6000 w peak power for 48 v battery voltage, 32 a transfer switch and 35 a battery charger output voltage: 230 vaC, frequency: 50 Hz max. efficiency is 95%, protection class IP22 always enough power thanks to PowerControl and Powerassist a maximum mains or generator current can be set on the Multiplus-II 48/3000/35-32 gx. The MultiPlus-II then takes into account other connected AC consumers and only uses the current that is "left over" to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The Powerassist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus-II immediately compensates for insufficient generator, shore power or mains power with energy from the battery. if the load is reduced, i.e. if consumers are switched off, the energy that is then available again in sufficient quantities can be used to charge the batteries Solar power: alternating current even in the event of a power failure The device can be used with both non-grid-connected and grid-connected pv systems, as well as with other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters. maximum flexibility thanks to two AC outputs The main output ensures uninterrupted operation. In the event of a grid failure or interruption of the shore/generator power, the MultiPlus-II takes over the supply of the connected consumers. Switching occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic equipment is guaranteed. The second output supplies power only when AC power is available at the input of the MultiPlus-II. consumers that must not discharge the battery, such as a water heater, can be connected to this output. Scope of the integrated gx device A vE.Can interface This can be used to connect vE.Can devices from victron (e.g. vE.Can mppt). The port can also be reconfigured via the remote console for use with a compatible CaN bus Li-Ion battery. 1xUSB connection 1x Ethernet port 1x vE.Direct connection many possibilities for system expansion Settings can be changed within minutes using the vEConfigure software (requires a computer or laptop and MK3 USB interface).multiple monitoring and control options are available: Color Control gx, venus gx, Octo gx, CaNvu gx, laptop, computer, Bluetooth (with the optional vE.Bus Smart Dongle), battery monitor, Digital Multi control panel Remote configuration and monitoring Install a Color Control gx or other gx products to connect to the Internet. Operating data can be stored and viewed free of charge on our vRM (victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed. Scope of delivery: 1x victron pmp482306000 Multiplus-II 48/3000/35-32 gx 230 v 1x instruction manual
€800.10*
€672.35**
The Multiplus-II 48/3000/35-32 gx is a high-end device combination from victron Energy (mpn pmp482306000) that combines classic Multiplus components w...
The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal for 12v systems thanks to its 20v operating voltage. In Offgridtec mono solar modules only cells of the highest quality grade are installed and guarantee a constant high quality and performance with maximum service life thanks to state-of-the-art manufacturing. Features of Offgridtec 150w 12v mono solar panel proven quality directly from Offgridtec manufactured according to the latest standards monocrystalline solar cells extremely resistant ESG glass makes the module usable even in the most adverse environmental conditions ideal for 12v systems on land or in mobile solar systems 2 bypass diodes - minimized power loss in shaded conditions The mono 150w 12v is one of over 40 proven solar panels from the Offgridtec portfolio and participates in Offgridtecs experience in manufacturing high quality 12v and 24v solar cells. The module can be used in very adverse operating conditions thanks to the extremely resistant solar glass. It can withstand heavy hail and storms or extreme cold and heat without any problems and thanks to the integrated bypass diodes, the module can continue to produce power even in shaded or low light conditions. The most important technical data at a glance Power (Pmax): 150w Working voltage (Vmp): 20 V Open circuit voltage (Voc): 24 V max. current (Imp): 7.5 A Short circuit current (Isc): 8.1 A max. system voltage: 1000 V permissible ambient temperature: -40°C - +85°C Dimensions: 1140 x 680 x 35 mm Weight: 12 kg Universally applicable Offgridtecs 150w 12v Mono is universally applicable for example in 12 Volt Solaranlagen on garden houses, allotments or for the power supply of lighting applications, self-sufficient systems of signal and surveillance technology and many more. But also in mobile systems such as in mobile home solar systems this panel makes a good figure. The connection cables are 80 cm long and equipped with MC4 connectors. Scope of delivery: Offgridtec 3-01-001255 150w mono 12v solar panel
€130.78*
€109.90**
The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal f...
The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in the range. It has a 3-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged.
Performance that sets standards
The fsp-2 195w Ultra is equipped with American SPR back-contact cells from SunPower. The look of the cells is completely black, which also gives the fsp-2 195w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and set new standards in this power class in combination with the low weight and compact dimensions of the fsp-2 panel.
extensive application possibilities:
excellent usable in the camping area
or for expeditions, climbing tours and much more...
for vehicles and boats without fixed solar installation ...
and numerous other applications in different areas...
technical highlights fsp-2 195w ultra foldable solar panel
Rated power: 195wp
Number of sides: 3 x 65 Wp
Module voltage (Vmp): 33,5 V
Max. Charge current (Imp): 5,82 A
Open circuit voltage (Voc): 39,4 V
Short circuit current (Isc): 6,17 A
Dimensions closed: 820 x 440 x 40 mm
Dimensions open designed: 820 x 1545 x 60 mm
Weight: 7,12 Kg
ETFE coating
SunPower high performance cells
6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side
0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller)
1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side
Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse
the included Profi-Connection Kit
The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller.
For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse.
customizable on request
All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred.
about the fsp-2 series
As with all Offgridtec solar module series, high quality has been emphasized in the fsp-2 series. The fsp-2 195w works with highly effective solar cells. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is coated with ETFE coating, which provides better protection and at the same time ensures very high light transmittance. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions.
Scope of delivery
1x Offgridtec fsp-2 195w 12v, 3-01-012680
1x Offgridtec fsp-2 Connection-Kit
€403.23*
€338.85**
The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in...
Besides a 290ml cartridge this handy Dekalin adhesive-set also includes the Dekalin Dekavator, DEKACLEAN cloths and a sheet of very fine sandpaper for an ideal preparation of the surface.
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various components.Thanks to it's adhesive power the use of clamps is mostly unnecassary. The Dekasyl MS-5 also serves as sealent between similar materials or when mechanical connections are used.
Application:
Elastic connections and sealing for trains, caravans, trucks, cars,...
Glueing windows of buses, trains, caravans,...
Glueing of edge profiles (aluminium or polyester) of trailers
Glueing of polyester components with metal frame
Characteristics:
Free of solvents, isocyanate and PVC
Very UV- and age-resistant
Very high initial strength. Very high adhesion in general even without priming on various surfaces.
Constantly elastic within a temperature range of -40°C to +120°
Neutral, odorless and quick-setting
After skim-development paintable - normally this does not influence the setting-process
Compatible with most industrial painting systems, alkyd resin paint as well as dispersion paint (because of the many different types of industrial paints a material compatibility test is recommended)
We recommend to mount our spoilers and cable entries only with Dekasyl adhesive together with DEKAvator as this connection had the best outcome in a laboratory test.
Why Dekasyl?
Manufacturers of caravans like Fendt, Dethleffs, Burstner, Carthago, Pilote and Hymer use Dekalin-products in many different areas, for example as sealent for roofs, side panels, undercoating, glueing of PMMA-windows, sound-proofing, engine-covering, and many more.As a global partner of the caravan and camping industry Dekalin provides you with a wide range of latest technology and supports sellers in realizing their demands. They offer special solutions for sealing, glueing, damming and repairing.
Details:Glue color: blackDelivery scope: 1x cartridge 290ml Dekalin 6252412 Dekasyl MS-5 adhesive black, 1x sheet of sandpaper, 1x Dekalin Dekavator 6257812 bottle 30ml, DEKACLEAN cleaning cloths
Besides a 290ml cartridge this handy Dekalin adhesive-set also includes the Dekalin Dekavator, DEKACLEAN cloths and a sheet of very fine sandpaper for...
Dieses Set enthält alles was Sie brauchen um Module mit je max. 1m Breite auf einem Ziegeldach zu befestigen. Die enthaltenen Dach-Haken sind spezielle für Ziegeldächer konstruiert. Durch hochwertigste korrosionsfreie Materialien aus Edelstahl und Aluminium ist eine sichere und langlebige Montage gewährleistet.
Die Stücklisten der Befestigungskits sind für eine Montage der Module direkt nebeneinander konzipiert. Sollten Sie z.B. zwei Reihen untereinander mit je drei Solarmodulen planen benötigen Sie zwei Kits für je drei Module.
Beinhaltet:
Dachhaken 3-fach verstellbar (Edelstahl)
Solar-Profilschienen (Aluminium)
Endklemmen (Aluminium)
Nutensteine (Aluminium)
Endkappen
Alle notwendigen Schrauben und Muttern
Hinweis:
Nur für gerahmte Module mit 30mm/35mm Rahmenstärke
Module sind nicht im Lieferumfang enthalten
Variants from €106.95*
€255.45*
€214.66**
Dieses Set enthält alles was Sie brauchen um Module mit je max. 1m Breite auf einem Ziegeldach zu befestigen. Die enthaltenen Dach-Haken sind spe...
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and October. The generated power is stored in the cycle-proof 122Ah agm battery - the high-quality charge controller with integrated display gives you information about the charge status of the battery while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 1000w (15min)
Features of the Autark M-Master
If required, module side expandable by 2 x 100w with low installation effort
Average daily yield between March and October: approx. 800wh (approx. 66Ah)
Plug & Play ready-to-connect system - plug together and go
Allows operation of 12v and 230v loads, as well as 5v usb consumers
usb charging possibility directly at the charge controller (max. 2,4A)
Easy to read lcd display informs about all operating parameters
Flexible mounting possibility thanks to 8m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb included)
Charge controller enables temperature compensated charging - temperature sensor included in delivery
Configurable 12v load output at the charge controller for loads up to max. 30a - suitable e.g. for lighting control
Application areas
This complete system can be used in many ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. The installation on the motor home is also conceivable - we also have the corresponding brackets and adhesive sets for the attachment.
Extensive connection options
230v ac 50hz 1000w (15min - 1000w / permanent - 800w / short time (starting currents) - 1600w) Schuko socket on the sine wave voltage converter
12v consumer output with 30a power directly at the charge controller
2 x usb charging port at the charge controller with max. 2.4a (total)
1 x usb charging port at the voltage converter with max. 1a power
Parts list - what's inside
2 x Offgridtec 100w V2 Solarpanel 23V black frame
1 x Pair of solar connector compatible junction boxes for parallel connection of the two solar modules
1 x 30a pwm charge controller with clear lcd display and usb charging possibility - the device also has a 30a load output and is easy to operate - all important parameters can be read on the display
1 x 122Ah agm battery with m8 screw terminal Dimensions: 406 x 174 x 233 mm(+5mm terminal) - the battery is absolutely maintenance free and leak proof and lasts up to 10 years depending on use
1 x 1000w 12v to 230v sine wave voltage converter with a shockproof socket incl. connection cable - the rated power of 1000w can be output by the device for 15 minutes - beyond that the inverter outputs 800w and can handle short time starting currents up to 1600w
1 x 8m 6mm² professional connection cable solar module to charge controller with original Stäubli solar-connectors and high quality Lapp Ölflex 2x6mm² solar cable
1 x 1.5m 10mm² professional battery connection cable with MIDI fuse holder, 40a MIDI fuse and m8 ring terminals for connection between charge controller and battery
1 x Temperature sensor with 3m length for connection of the controller to the batrie
1 x 1m 25mm² connection cable from inverter to battery (included with the voltage converter)
1 x Fuse holder + 125A Mega fuse for installation between voltage transformer and battery positive pole for protection against short circuit
Roof mount for the solar module
Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne etc.)
Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
Fastening kit for pitched roof installation on Bieberschwanz tiles
Scope of delivery:
1x Solaranlage Autark M-Master with 2x100w solar panel, 30a pwm charge controller with lcd display and usb ports, 1000w sine wave voltage converter, 122Ah agm battery, user manuals
€741.44*
€623.06**
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and O...
Extremely versatile complete package The Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. As well as being used as a usv backup solution with a choice between mains and battery priority, this PV system can also be used as a self-consumption system. There are virtually no limits to the performance of this Solarasystem - depending on personal requirements and on request, extensions are possible, both on the module and battery side. if a higher output power is required on the inverter, additional identical devices can also be connected here to increase performance. In addition to the power electronics, the storage system and the solar modules, all components required for the connection are also included in the scope of delivery, with the exception of the solar module holder, which must be ordered separately. all other components are plug and play - this means no annoying plug installation or the like - connect and you're done. Depending on your choice, the system is supplied with or without an electricity meter. Parts list - what's inside 30x Luxen Solar 430w Full Black Solar panel Luxneri Series 5 4 x 4.8kwh Pylontech us5000 LiFePo4 storage batteries 1x victron Energy mppt SmartSolar charge controller 450/200 48v 3x victron pmp482505010 Multiplus-II 48/5000/70-50a 1x Cerbo gx + 1x gx Touch 50 from victron Energy - the communication center of your system 1x victron Energy Lynx Distributor for dc distribution and protection 1x victron Energy Lynx Power In 3x 10m Offgridtec® Professional connection cable 6mm² solar module to charge controller for the connection between solar modules and charge controller 2 x Pylontechbattery connection cable set Pylontech to inverter 2 x 2.0m 25mm² amphenol to m8 1x 1m battery cable 50mm² m8 eyelets on both sides 3x 1m battery cable 35mm² m8 eyelets on both sides 3x 10m 6mm² mc-4 connection cable 1x vE.Can to CaN-Bus bms Type a cable 1.8m aSS030710018 for connecting the Cerbo gx to the memory 2x 3m victron rj45 utp cable for connecting the MultiPlus to the Cerbo gx 3x Mega fuse 125a / 70v 1x Mega fuse 250a / 70a 2x 0.9m victron rj45 utp cable 1x Pylontech Battery cabinet for us5000 When selecting electricity meter: 1x victron vm-3p75ct Energy Meter 1x victron 5m rj45 utp cable Extended use of your HomePremium system The HomePremium system is supplied either with or without victron electricity meter and cable, whereby an energy meter with connection cable is mandatory for the installation of an Energy Storage System. With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem. Luxen Solar 430w Full Black solar module The monocrystalline and bifacial 430w Full Black Series n5 solar module fromLuxen Solarsolar module impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. The smbb half-cut cell technology was also used during production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE. Features Glass-glass module N-TOPCon cell technology smbb Half-Cut cell technology Low bos & LCOE Bifacial cell module technology excellent anti-PID and low lid performance 3 bypass diodes 30-year performance guarantee and 15-year product guarantee high cell efficiency of over 22% Half-cell technology In half-cell technology ("half-cut"), conventional silicon cells are cut in half using a laser. The resulting halves are then centrally connected in parallel, which leads to an increased output of the solar module by reducing resistance losses. Bifacial cells Bifacial means two-faced. And the name says it all: the Luxen Solar 430w n5 module is also equipped with solar cells on the back, which means that sunlight can be absorbed even better and the efficiency of the overall module is increased. Technical data maximum output: 430w Module voltage (vmp): 32.04v max. current (imp): 13.42a Open circuit voltage (voc): 38.96v Short-circuit current (Isc): 14.13a Module efficiency: 22.02% dimensions: 1722 x 1134 x 30 mm Operating temperature range: -40°C to +85°C Cells: 108 (6x18) max. operating voltage: 1500v dc Weight: 23,5kg LiFePo4 storage technology from Pylontech - proven, reliable, safe The us3000c storage battery from Pylontech is a latest-generation lithium iron phosphate battery that offers maximum safety and service life. Each module has a battery management system (bms) for comprehensive protection against deep discharge, overcharging and damage caused by high currents or extreme temperatures. Short circuits and reverse polarity are also excluded. Features of the Pylontech us3000c memory modules Extremely cycle-proof - over 6000 cycles at 95% DoD (discharge per cycle) absolutely intrinsically safe due to integrated protective shutdown (bms) High charging and discharging capacity of up to 5kw per module High storage density Low weight and compact design absolutely maintenance-free and easy to install 10-year guarantee The heart of the system - the victron MultiPlus-II 48/5000 The Multiplus-II 48/5000/70-50 from victron Energy combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 100a and enables use in ESS applications. The setting options on the MultiPlus-II are extremely varied, as are its possible applications. We have already made the most important settings for you so that the system, as it is supplied, lives up to the description "Plug and Play" - the system can therefore be used immediately without any further configuration. Performance features and characteristics of the MultiPlus-II 48/5000 PowerControl and Powerassist - increasing mains or generator output Built-in anti-islanding function and connection option for external current sensor (optional) Can be used as a backup device in grid-connected systems vE.Bus interface for parallel and three-phase operation Remote monitoring and system integration Parallel and three-phase operation Approved according to vde-ar-n 4105 Technical data 5000 w power with non-linear load - 4000 w continuous load - 9000 w peak power For 48 v battery voltage, 50 a transfer switch and 70a battery charger output voltage: 230 vaC, frequency: 50 Hz Max. efficiency: 95% Protection class IP22 Maximum flexibility thanks to two AC outputs The MultiPlus-II offers uninterrupted operation by automatically taking over the supply to consumers in the event of mains failures or interruptions to the shore/generator power. The switchover takes place in less than 20 milliseconds to ensure continuous operation of electronic devices. A second output supplies power only when alternating current is present at the input of the MultiPlus-II. This makes it possible to connect consumers such as a water heater that should not be discharged from the battery. Configuration The MultiPlus-II is supplied unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system, we can do this for you for an additional charge. To do this, place the article linked above "Offgridtec pre-configuration" in the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed. victron Energy Cerbo gx and gx Touch 50 - the communication center of your system The latest development in system monitoring from the company allows you to control and configure your system with ease. rounded off by the gxC Touch 50 - a waterproof 5 inch touchscreen - you always have an overview of your system parameters. The Cerbo's functions allow you to control and monitor your system perfectly and maximize system performance in an unprecedentedly simple way. victron Energy has developed a new system monitor that allows you to easily control and configure your system. The gx Touch 50, a waterproof 5-inch touchscreen, provides a clear overview of your system parameters. The Cerbo module allows you to precisely monitor your system and maximize performance. It is compatible with both solar charge controllers and grid-connected inverters. Mounting material and connection cable are included in the scope of delivery. The Bluetooth function of the gx Touch 50 makes accessing your system even quicker and easier. An optional wall bracket is available. victron Remote portal The victron Remote Portal (vRM) is a free victron Energy service that allows you to read out your system data remotely and configure the devices accordingly. This means that you always have full control and an overview of all relevant system parameters, even when you are away. The functionality is available online as a demo version and is ideal for getting a first impression - https://vrm.victronenergy.com/landingpage Safety note: Only have this complete system installed and commissioned by a qualified electrician.
Variants from €16,173.02*
€0.00*
€0.00**
Extremely versatile complete package The Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. As well a...
The basicPremium-XL 150w Solaranlage 12v 24v from Offgridtec (mpn 4-01-010970), is based on a high-quality, monocrystalline 150 wp solar module and the convenient pwm-12/24-30a charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable - each from the Pro-Connect series. The average daily yield in the period from March to October is about 600 wh*. The solar power of the system can be easily increased by several modules later if your needs increase. The system offers all basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect base for a variety of possible solar applications.
High-quality basic set for a wide range of applications
Offgridtec Solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, the garage or in mobile applications. We constantly focus on high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 150w solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The plug & play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. The pwm-12/24-30a Pro charge controller, with its convenient display and up-to-date charging algorithms, ensures easy operation of the system and perfect charging of your batteries. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
applications Solaranlage
12v or 24v dc power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging of smartphones, tablets or other devices with 12v / 5v dc power supply
Performance parameters at a glance
average daily yield: 600 wh
Expandability of solar power by using the same panel to max. 450 wp (at 24v = 750 wp)
Available power outputs: 5v dc and 12v dc at the charge controller (230v only with optional voltage converter)
Components of the basicPremium-XL 150w Solaranlage 12v 24v
1 x Offgridtec monocrystalline 12v 150 wp solar panel
Rated power: 150 wp, part number: 3-01-018395
Operating voltage (Vmp) 23,9 v, operating current (Imp) 6,28 a
equipped with high efficiency solar cells
minimized power loss during shading due to integrated bypass diode
solid: frame made of anodized aluminum + special tempered ESG solar glass
MC4 connector, dimensions (WxLxH): 1350 x 590 x 35 mm, weight: 8,9 Kg
1 x PwM-12/24-30 Pro solar controller 12v/24v
max. charging current 30 a, max. PV power at 12v / 24v system: 390 w / 780 w
modern, 3-stage PwM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: agm, gel, and liquid lead acid
intuitive operation via 2 buttons directly on the device
large LCD display with numerous display options, including kwh meter
2 usb ports with a maximum output power of 2,4a
Load output with numerous configuration options, e.g. for light control
Temperature compensated battery charging (optional temperature sensor required)
1x 8m 2x6mm² solar connection cable controller/solar module
TwIN cable, plug & play - ready for immediate use
MC4 connector on solar module side, ferrules on charge controller side
highest quality solar cable: TwIN cable
wire cross section: 2x6mm², length: 8m
1x 1,5m 2x6mm² 30 a battery connection cable controller/battery
Plug & Play - immediately ready for use
wire cross section: 2x6mm², length: 1,5m
including flat fuse holder with built-in 30 a aTO fuse
ferrules on charge controller side, m8 ring terminals on battery side
incl. battery pole terminals for connection to round pole terminals
Flexible and very easy to install
The system is very easy to install, even by people who have little experience with solar technology. The cables are all delivered plug & play, ready for connection. You only need to connect the components together and the power production can begin.
Expandable, customizable
like every system from Offgridtec, the basicPremium-S can also be individually adapted and modified to your requirements. Our technical sales department is looking forward to your inquiry. Please contact customer service for any costs that may be incurred.
Scope of delivery:
1x Offgridtec 4-01-010970 basicPremium-XL 150w 12v 24v Solaranlage
1x instruction manual
including all components listed above
€210.67*
€177.03**
The basicPremium-XL 150w Solaranlage 12v 24v from Offgridtec (mpn 4-01-010970), is based on a high-quality, monocrystalline 150 wp solar module and th...
The basicPremium-XL 150w Solaranlage 12v 24v from Offgridtec (mpn 4-01-010970), is based on a high-quality, monocrystalline 150 wp solar module and the convenient pwm-12/24-30a charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable - each from the Pro-Connect series. The average daily yield in the period from March to October is about 600 wh*. The solar power of the system can be easily increased by several modules later if your needs increase. The system offers all basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect base for a variety of possible solar applications.
High-quality basic set for a wide range of applications
Offgridtec Solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, the garage or in mobile applications. We constantly focus on high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 150w solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The plug & play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. The pwm-12/24-30a Pro charge controller, with its convenient display and up-to-date charging algorithms, ensures easy operation of the system and perfect charging of your batteries. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
applications Solaranlage
12v or 24v dc power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging of smartphones, tablets or other devices with 12v / 5v dc power supply
Performance parameters at a glance
average daily yield: 600 wh
Expandability of solar power by using the same panel to max. 450 wp (at 24v = 750 wp)
Available power outputs: 5v dc and 12v dc at the charge controller (230v only with optional voltage converter)
Components of the basicPremium-XL 150w Solaranlage 12v 24v
1 x Offgridtec monocrystalline 12v 150 wp solar panel
Rated power: 150 wp, part number: 3-01-018395
Operating voltage (Vmp) 23,9 v, operating current (Imp) 6,28 a
equipped with high efficiency solar cells
minimized power loss during shading due to integrated bypass diode
solid: frame made of anodized aluminum + special tempered ESG solar glass
MC4 connector, dimensions (WxLxH): 1350 x 590 x 35 mm, weight: 8,9 Kg
1 x PwM-12/24-30 Pro solar controller 12v/24v
max. charging current 30 a, max. PV power at 12v / 24v system: 390 w / 780 w
modern, 3-stage PwM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: agm, gel, and liquid lead acid
intuitive operation via 2 buttons directly on the device
large LCD display with numerous display options, including kwh meter
2 usb ports with a maximum output power of 2,4a
Load output with numerous configuration options, e.g. for light control
Temperature compensated battery charging (optional temperature sensor required)
1x 8m 2x6mm² solar connection cable controller/solar module
TwIN cable, plug & play - ready for immediate use
MC4 connector on solar module side, ferrules on charge controller side
highest quality solar cable: TwIN cable
wire cross section: 2x6mm², length: 8m
1x 1,5m 2x6mm² 30 a battery connection cable controller/battery
Plug & Play - immediately ready for use
wire cross section: 2x6mm², length: 1,5m
including flat fuse holder with built-in 30 a aTO fuse
ferrules on charge controller side, m8 ring terminals on battery side
incl. battery pole terminals for connection to round pole terminals
Flexible and very easy to install
The system is very easy to install, even by people who have little experience with solar technology. The cables are all delivered plug & play, ready for connection. You only need to connect the components together and the power production can begin.
Expandable, customizable
like every system from Offgridtec, the basicPremium-S can also be individually adapted and modified to your requirements. Our technical sales department is looking forward to your inquiry. Please contact customer service for any costs that may be incurred.
Scope of delivery:
1x Offgridtec 4-01-010970 basicPremium-XL 150w 12v 24v Solaranlage
1x instruction manual
including all components listed above
The basicPremium-L 200w Solaranlage 12v 24v from Offgridtec (mpn 4-01-002635), is based on a high-quality, monocrystalline 200 wp solar module and the convenient pwm-12/24-30a charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable - each from the Pro-Connect series. The average daily yield in the period from March to October is about 800 wh*. The solar power of the system can be easily increased by several modules later if your needs increase. The system offers all basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect base for a variety of possible solar applications.
High quality basic set for various applications
Offgridtec Solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, the garage or in mobile applications. We constantly focus on high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 100w solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The plug & play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. The pwm-12/24-30a Pro charge controller, with its convenient display and up-to-date charging algorithms, ensures easy operation of the system and perfect charging of your batteries. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
applications Solaranlage
12v or 24v dc power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging of smartphones, tablets or other devices with 12v / 5v dc power supply
Performance parameters at a glance
average daily yield: 800 wh
Expandability of solar power by using the same panel to max. 300 wp (at 24v = 700 wp)
Available power outputs: 5v dc and 12v dc at the charge controller (230v only with optional voltage converter)
Components of the basicPremium-L 200w Solaranlage 12v 24v
2 x Offgridtec 100w V2 Solarpanel 23V black frame
Rated power: 200 wp, part number: 3-01-018385
Operating voltage (Vmp) 23,9 v, operating current (Imp) 4,2 a
equipped with high quality monocrystalline solar cells
minimized power loss during shading due to integrated bypass diode
black frame
Solar connector, dimensions (WxLxH): 925 x 560 x 35 mm, weight: 6,22 Kg
1 x PwM-12/24-30 Pro solar controller 12v/24v
max. charging current 30 a, max. PV power at 12v / 24v system: 390 w / 780 w
modern, 3-stage PwM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: agm, gel, and liquid lead acid
intuitive operation via 2 buttons directly on the device
large LCD display with numerous display options, including kwh meter
2 usb ports with a maximum output power of 2.4a
Load output with numerous configuration options, e.g. for light control
Temperature compensated battery charging (optional temperature sensor required)
1x 8m 2x6mm² solar connection cable controller/solar module
TwIN cable, plug & play - ready for immediate use
Solar connector on solar module side, ferrules on charge controller side
highest quality solar cable: TwIN cable
wire cross section: 2x6mm², length: 8m
1x 1,5 2x6mm² 30 a battery connection cable controller/battery (Offgridtec)
Plug & Play - immediately ready for use
wire cross section: 2x6mm², length: 1,5m
including flat fuse holder with built-in 30 a aTO fuse
ferrules on charge controller side, m8 ring terminals on battery side
incl. battery pole terminals for connection to round pole terminals
1x Offgridtec branching sockets Y-connector (pair)
Flexible and very easy to install
The system is very easy to install, even by people who have little experience with solar technology. The cables are all delivered plug & play, ready for connection. You only need to connect the components together and the power production can begin.
Expandable, customizable
like every system from Offgridtec, the basicPremium-S can also be individually adapted and modified to your requirements. Our technical sales department is looking forward to your inquiry. Please contact customer service for any costs that may be incurred.
Scope of delivery:
1x Offgridtec 4-01-002635 basicPremium-L 200w 12v 24v Solaranlage
1x instruction manual
including all components listed above
€264.97*
€222.66**
The basicPremium-L 200w Solaranlage 12v 24v from Offgridtec (mpn 4-01-002635), is based on a high-quality, monocrystalline 200 wp solar module and the...
The basicPremium-L 200w Solaranlage 12v 24v from Offgridtec (mpn 4-01-002635), is based on a high-quality, monocrystalline 200 wp solar module and the convenient pwm-12/24-30a charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable - each from the Pro-Connect series. The average daily yield in the period from March to October is about 800 wh*. The solar power of the system can be easily increased by several modules later if your needs increase. The system offers all basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect base for a variety of possible solar applications.
High quality basic set for various applications
Offgridtec Solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, the garage or in mobile applications. We constantly focus on high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 100w solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The plug & play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. The pwm-12/24-30a Pro charge controller, with its convenient display and up-to-date charging algorithms, ensures easy operation of the system and perfect charging of your batteries. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
applications Solaranlage
12v or 24v dc power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging of smartphones, tablets or other devices with 12v / 5v dc power supply
Performance parameters at a glance
average daily yield: 800 wh
Expandability of solar power by using the same panel to max. 300 wp (at 24v = 700 wp)
Available power outputs: 5v dc and 12v dc at the charge controller (230v only with optional voltage converter)
Components of the basicPremium-L 200w Solaranlage 12v 24v
2 x Offgridtec 100w V2 Solarpanel 23V black frame
Rated power: 200 wp, part number: 3-01-018385
Operating voltage (Vmp) 23,9 v, operating current (Imp) 4,2 a
equipped with high quality monocrystalline solar cells
minimized power loss during shading due to integrated bypass diode
black frame
Solar connector, dimensions (WxLxH): 925 x 560 x 35 mm, weight: 6,22 Kg
1 x PwM-12/24-30 Pro solar controller 12v/24v
max. charging current 30 a, max. PV power at 12v / 24v system: 390 w / 780 w
modern, 3-stage PwM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: agm, gel, and liquid lead acid
intuitive operation via 2 buttons directly on the device
large LCD display with numerous display options, including kwh meter
2 usb ports with a maximum output power of 2.4a
Load output with numerous configuration options, e.g. for light control
Temperature compensated battery charging (optional temperature sensor required)
1x 8m 2x6mm² solar connection cable controller/solar module
TwIN cable, plug & play - ready for immediate use
Solar connector on solar module side, ferrules on charge controller side
highest quality solar cable: TwIN cable
wire cross section: 2x6mm², length: 8m
1x 1,5 2x6mm² 30 a battery connection cable controller/battery (Offgridtec)
Plug & Play - immediately ready for use
wire cross section: 2x6mm², length: 1,5m
including flat fuse holder with built-in 30 a aTO fuse
ferrules on charge controller side, m8 ring terminals on battery side
incl. battery pole terminals for connection to round pole terminals
1x Offgridtec branching sockets Y-connector (pair)
Flexible and very easy to install
The system is very easy to install, even by people who have little experience with solar technology. The cables are all delivered plug & play, ready for connection. You only need to connect the components together and the power production can begin.
Expandable, customizable
like every system from Offgridtec, the basicPremium-S can also be individually adapted and modified to your requirements. Our technical sales department is looking forward to your inquiry. Please contact customer service for any costs that may be incurred.
Scope of delivery:
1x Offgridtec 4-01-002635 basicPremium-L 200w 12v 24v Solaranlage
1x instruction manual
including all components listed above
The basicPremium-L 100w Solaranlage 12v from Offgridtec (mpn 4-01-002600), is based on a high-quality, monocrystalline 100 wp solar module and the convenient pwm-12/24-20a charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable - each from the Pro-Connect series. The average daily yield in the period from March to October is about 400 wh*. The solar power of the system can be easily increased by several modules later if your needs increase. The system offers all basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect base for a variety of possible solar applications.
High-quality basic set for a wide range of applications
Offgridtec Solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, the garage or in mobile applications. We constantly focus on high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 100w solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The plug & play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. The pwm-12/24-20a Pro charge controller, with its convenient display and up-to-date charging algorithms, ensures easy operation of the system and perfect charging of your batteries. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
applications Solaranlage
12v dc power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging of smartphones, tablets or other devices with 12v / 5v dc power supply
Performance parameters at a glance
average daily yield: 400 wh
Expandability of solar power by using the same panel to max. 200 wp
Available power outputs: 5v dc and 12v dc at the charge controller (230v only with optional voltage converter)
Components of the basicPremium-L 100w Solaranlage 12v
1 x Offgridtec MONO 100W V2 Solarpanel 23V Black Frame
Rated power: 100 wp, part number: 3-01-018385
Operating voltage (Vmp) 23,9 v, operating current (Imp) 4,2 a
equipped with high quality monocrystalline cells
minimized power loss during shading due to integrated bypass diode
black frame
MC4 connector, dimensions (WxLxH): 925 x 560 x 35 mm, weight: 6,22 Kg
1 x PwM-12/24-20 Pro solar controller 12v/24v
max. charging current 20 a, max. PV power at 12v: 260 w
modern, 3-stage PwM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: agm, gel, and liquid lead acid
intuitive operation via 2 buttons directly on the device
large LCD display with numerous display options, including kwh meter
2 usb ports with a maximum output power of 2.4a
Load output with numerous configuration options, e.g. for light control
Temperature compensated battery charging (optional temperature sensor required)
1x 8m 2x6mm² solar connection cable controller/solar module
TwIN cable, Plug & Play - ready for immediate use
MC4 connector on solar module side, ferrules on charge controller side
highest quality solar cable: TwIN cable
wire cross section: 2x6mm², length: 8m
1x 1,5 2x6mm² 30 a battery connection cable controller/battery (Offgridtec)
Plug & Play - immediately ready for use
wire cross section: 2x6mm², length: 1,5m
including flat fuse holder with built-in 30 a aTO fuse
ferrules on charge controller side, m8 ring terminals on battery side
incl. battery pole terminals for connection to round pole terminals
Flexible and very easy to install
The system is very easy to install, even by people who have little experience with solar technology. The cables are all delivered plug & play, ready for connection. You only need to connect the components together and the power production can begin.
Expandable, customizable
like every system from Offgridtec, the basicPremium-S can also be individually adapted and modified to your requirements. Our technical sales department is looking forward to your inquiry. Please contact customer service for any costs that may be incurred.
Scope of delivery:
1x Offgridtec 4-01-002600 basicPremium-L 100w 12v Solaranlage
1x instruction manual
including all components listed above
€172.15*
€144.66**
The basicPremium-L 100w Solaranlage 12v from Offgridtec (mpn 4-01-002600), is based on a high-quality, monocrystalline 100 wp solar module and the con...
The basicPremium-L 100w Solaranlage 12v from Offgridtec (mpn 4-01-002600), is based on a high-quality, monocrystalline 100 wp solar module and the convenient pwm-12/24-20a charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable - each from the Pro-Connect series. The average daily yield in the period from March to October is about 400 wh*. The solar power of the system can be easily increased by several modules later if your needs increase. The system offers all basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect base for a variety of possible solar applications.
High-quality basic set for a wide range of applications
Offgridtec Solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, the garage or in mobile applications. We constantly focus on high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 100w solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The plug & play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. The pwm-12/24-20a Pro charge controller, with its convenient display and up-to-date charging algorithms, ensures easy operation of the system and perfect charging of your batteries. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
applications Solaranlage
12v dc power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging of smartphones, tablets or other devices with 12v / 5v dc power supply
Performance parameters at a glance
average daily yield: 400 wh
Expandability of solar power by using the same panel to max. 200 wp
Available power outputs: 5v dc and 12v dc at the charge controller (230v only with optional voltage converter)
Components of the basicPremium-L 100w Solaranlage 12v
1 x Offgridtec MONO 100W V2 Solarpanel 23V Black Frame
Rated power: 100 wp, part number: 3-01-018385
Operating voltage (Vmp) 23,9 v, operating current (Imp) 4,2 a
equipped with high quality monocrystalline cells
minimized power loss during shading due to integrated bypass diode
black frame
MC4 connector, dimensions (WxLxH): 925 x 560 x 35 mm, weight: 6,22 Kg
1 x PwM-12/24-20 Pro solar controller 12v/24v
max. charging current 20 a, max. PV power at 12v: 260 w
modern, 3-stage PwM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: agm, gel, and liquid lead acid
intuitive operation via 2 buttons directly on the device
large LCD display with numerous display options, including kwh meter
2 usb ports with a maximum output power of 2.4a
Load output with numerous configuration options, e.g. for light control
Temperature compensated battery charging (optional temperature sensor required)
1x 8m 2x6mm² solar connection cable controller/solar module
TwIN cable, Plug & Play - ready for immediate use
MC4 connector on solar module side, ferrules on charge controller side
highest quality solar cable: TwIN cable
wire cross section: 2x6mm², length: 8m
1x 1,5 2x6mm² 30 a battery connection cable controller/battery (Offgridtec)
Plug & Play - immediately ready for use
wire cross section: 2x6mm², length: 1,5m
including flat fuse holder with built-in 30 a aTO fuse
ferrules on charge controller side, m8 ring terminals on battery side
incl. battery pole terminals for connection to round pole terminals
Flexible and very easy to install
The system is very easy to install, even by people who have little experience with solar technology. The cables are all delivered plug & play, ready for connection. You only need to connect the components together and the power production can begin.
Expandable, customizable
like every system from Offgridtec, the basicPremium-S can also be individually adapted and modified to your requirements. Our technical sales department is looking forward to your inquiry. Please contact customer service for any costs that may be incurred.
Scope of delivery:
1x Offgridtec 4-01-002600 basicPremium-L 100w 12v Solaranlage
1x instruction manual
including all components listed above
The basicPremium-L 300w Solaranlage 12v 24v from Offgridtec (mpn 4-01-002655), is based on a high quality monocrystalline 300 wp solar module and the convenient pwm-12/24-45a charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable. The average daily yield in the period from March to October is about 1200 wh*. The solar power of the system can be easily increased by several modules later if your needs increase. The system offers all basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect base for a variety of possible solar applications.
High-quality basic set for a wide range of applications
Offgridtec Solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, the garage or in mobile applications. We constantly focus on high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 100w solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The plug & play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. The pwm-12/24-45a Pro charge controller, with its convenient display and up-to-date charging algorithms, ensures good operability of the system and perfect charging of your batteries. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
applications Solaranlage
12v or 24v dc power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging of smartphones, tablets or other devices with 12v / 5v dc power supply
Components of the basicPremium-L 300w Solaranlage 12v 24v
3 x Offgridtec 100w V2 Solarpanel 23V black frame
Rated power: 300 wp, part number: 3-01-018385
Operating voltage (Vmp) 23,9 v, operating current (Imp) 4,2 a
minimized power drop in case of shading due to integrated bypass diode
black frame
Solar connector, dimensions (WxLxH): 925 x 560 x 35 mm, weight: 6,22 Kg
1 x pwm-12/24-45 Pro solar controller 12v/24v
max. charging current 45 a, max. PV power at 12v / 24v system: 590 w / 1180 w
modern, 3-stage PwM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: agm, gel, and liquid lead acid
intuitive operation via 2 buttons directly on the device
large LCD display with numerous display options, including kwh meter
2 usb ports with a maximum output power of 2,4a
Load output with numerous configuration options, e.g. for light control
Temperature compensated battery charging (optional temperature sensor required)
1x 8m 2x6mm² solar connection cable controller/solar module
TwIN cable, plug & play - ready for immediate use
Solar connector on solar module side, ferrules on charge controller side
highest quality solar cable: TwIN cable
wire cross section: 2x6mm², length: 8m
1x 1,5m 10mm² 50 a battery connection cable controller/battery (Offgridtec)
Plug & Play - immediately ready for use
wire cross section: 10mm², length: 1,5m
including MIDI fuse holder and with 50a MIDI fuse
ferrules on charge controller side, m8 ring terminals on battery side
incl. battery terminals for connection to round terminals
2x junction boxes and 4x solar connection cables for connecting the solar modules
Flexible and very easy to install
The system is very easy to install, even by people who have little experience with solar technology. The cables are all delivered plug & play, ready for connection. You only need to connect the components together and the power production can begin.
Expandable, customizable
like every system from Offgridtec, the basicPremium-S can also be individually adapted and modified to your requirements. Our technical sales department is looking forward to your inquiry. Please contact customer service for any costs that may be incurred.
Scope of delivery:
1x Offgridtec 4-01-002655 basicPremium-L 300w 12v 24v Solaranlage
1x instruction manual
including all components listed above
€430.17*
€361.49**
The basicPremium-L 300w Solaranlage 12v 24v from Offgridtec (mpn 4-01-002655), is based on a high quality monocrystalline 300 wp solar module and the ...
The basicPremium-L 300w Solaranlage 12v 24v from Offgridtec (mpn 4-01-002655), is based on a high quality monocrystalline 300 wp solar module and the convenient pwm-12/24-45a charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable. The average daily yield in the period from March to October is about 1200 wh*. The solar power of the system can be easily increased by several modules later if your needs increase. The system offers all basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect base for a variety of possible solar applications.
High-quality basic set for a wide range of applications
Offgridtec Solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, the garage or in mobile applications. We constantly focus on high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 100w solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The plug & play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. The pwm-12/24-45a Pro charge controller, with its convenient display and up-to-date charging algorithms, ensures good operability of the system and perfect charging of your batteries. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
applications Solaranlage
12v or 24v dc power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging of smartphones, tablets or other devices with 12v / 5v dc power supply
Components of the basicPremium-L 300w Solaranlage 12v 24v
3 x Offgridtec 100w V2 Solarpanel 23V black frame
Rated power: 300 wp, part number: 3-01-018385
Operating voltage (Vmp) 23,9 v, operating current (Imp) 4,2 a
minimized power drop in case of shading due to integrated bypass diode
black frame
Solar connector, dimensions (WxLxH): 925 x 560 x 35 mm, weight: 6,22 Kg
1 x pwm-12/24-45 Pro solar controller 12v/24v
max. charging current 45 a, max. PV power at 12v / 24v system: 590 w / 1180 w
modern, 3-stage PwM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: agm, gel, and liquid lead acid
intuitive operation via 2 buttons directly on the device
large LCD display with numerous display options, including kwh meter
2 usb ports with a maximum output power of 2,4a
Load output with numerous configuration options, e.g. for light control
Temperature compensated battery charging (optional temperature sensor required)
1x 8m 2x6mm² solar connection cable controller/solar module
TwIN cable, plug & play - ready for immediate use
Solar connector on solar module side, ferrules on charge controller side
highest quality solar cable: TwIN cable
wire cross section: 2x6mm², length: 8m
1x 1,5m 10mm² 50 a battery connection cable controller/battery (Offgridtec)
Plug & Play - immediately ready for use
wire cross section: 10mm², length: 1,5m
including MIDI fuse holder and with 50a MIDI fuse
ferrules on charge controller side, m8 ring terminals on battery side
incl. battery terminals for connection to round terminals
2x junction boxes and 4x solar connection cables for connecting the solar modules
Flexible and very easy to install
The system is very easy to install, even by people who have little experience with solar technology. The cables are all delivered plug & play, ready for connection. You only need to connect the components together and the power production can begin.
Expandable, customizable
like every system from Offgridtec, the basicPremium-S can also be individually adapted and modified to your requirements. Our technical sales department is looking forward to your inquiry. Please contact customer service for any costs that may be incurred.
Scope of delivery:
1x Offgridtec 4-01-002655 basicPremium-L 300w 12v 24v Solaranlage
1x instruction manual
including all components listed above
The basicPremium-S 50W solar system 12V 24V from Offgridtec (MPN 4-01-002620), is based on a high-quality, monocrystalline 50 Wp solar module and the convenient PWM-10/24 10A charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable - each from the Pro-Connect series. The average daily yield in the period from March to October is about 200 Wh*. The solar output of the system can also be easily increased at a later date should your needs increase. The system offers all the basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect basis for a variety of possible solar applications.
High-quality basic set for a wide range of applications
Offgridtec solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, garage or in the mobile sector. We constantly focus on the high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 50W solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The Plug & Play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. With its convenient display and up-to-date charging algorithms, the PWM-10/24 10A Pro charge controller ensures that the system is easy to operate and your batteries are perfectly charged. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
Applications solar system
12V or 24V DC power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging smartphones, tablets or other devices with 12V / 5V DC power supply
Performance parameters at a glance
Average daily yield: 200 Wh
Solar output can be extended to max. 100 Wp (at 24V = 250 Wp) if the same panel is used
Available power outputs: 5V DC and 12V DC at the charge controller (230V only with optional voltage converter)
Components of the basicPremium-S 50W solar system 12V 24V
1 x Offgridtec monocrystalline 12V 50 Wp solar module
Rated power: 50 Wp, part number: 3-01-001260
Operating voltage (Vmp) 17.8 V, operating current (Imp) 2.81 A
equipped with 'high-quality monocrystalline cells
minimised power loss during shading due to integrated bypass diode
solid: frame made of anodised aluminium + specially hardened ESG solar glass
MC4 connector, dimensions (WxLxH): 650 x 505 x 30 mm, weight: 3.8 Kg
1 x PWM-10/24 10 Pro solar controller 12V/24V
max. charging current 10 A, max. PV power with 12V / 24V system: 130 W / 260 W
Modern, 3-stage PWM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: AGM, GEL, and liquid lead acid
Intuitive operation via 2 buttons directly on the unit
Large LCD display with numerous display options, including kWh meter
2 USB ports with a maximum output of 2.4A
Load output with numerous configuration options, e.g. for light control
Temperature-compensated battery charging (optional temperature sensor required)
1x 8m 2x6mm² solar connection cable controller/solar module
TWIN cable, Plug & Play - ready for immediate use
MC4 connectors on the solar module side, wire end ferrules on the charge controller side
High-quality solar cable: TWIN cable
Wire cross-section: 2x6mm², length: 8m
1x 1,5 2x6mm² 30 A battery connection cable controller/battery (Offgridtec)
Plug & Play - immediately ready for use
wire cross-section: 2x6mm², length: 1.5m
Including flat fuse holder with built-in 30 A ATO fuse
Wire end ferrules on charge controller side, M8 ring terminals on battery side
incl. battery pole terminals for connection to round pole terminals
Flexible and very easy to install
The system is very easy to install, even for people who have little experience with solar technology. The cables are all supplied plug & play, i.e. ready for connection. You only need to connect the components and the electricity production can begin.
Expandable, customisable
Wie jedes System von Offgridtec, kann auch die basicPremium-S an Ihre Anforderungen individuell angepasst und modifiziert werden. Unser technischer Vertrieb freut sich auf Ihre Anfrage. Eventuell anfallende Kosten sind beim Kundenservice zu erfragen.
Scope of delivery:
1x Offgridtec 4-01-002620 basicPremium-S 50W 12V 24V solar system
1x instruction manual
including all components listed above
€144.89*
€121.76**
The basicPremium-S 50W solar system 12V 24V from Offgridtec (MPN 4-01-002620), is based on a high-quality, monocrystalline 50 Wp solar module and the ...
The basicPremium-S 50W solar system 12V 24V from Offgridtec (MPN 4-01-002620), is based on a high-quality, monocrystalline 50 Wp solar module and the convenient PWM-10/24 10A charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable - each from the Pro-Connect series. The average daily yield in the period from March to October is about 200 Wh*. The solar output of the system can also be easily increased at a later date should your needs increase. The system offers all the basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect basis for a variety of possible solar applications.
High-quality basic set for a wide range of applications
Offgridtec solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, garage or in the mobile sector. We constantly focus on the high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 50W solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The Plug & Play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. With its convenient display and up-to-date charging algorithms, the PWM-10/24 10A Pro charge controller ensures that the system is easy to operate and your batteries are perfectly charged. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
Applications solar system
12V or 24V DC power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging smartphones, tablets or other devices with 12V / 5V DC power supply
Performance parameters at a glance
Average daily yield: 200 Wh
Solar output can be extended to max. 100 Wp (at 24V = 250 Wp) if the same panel is used
Available power outputs: 5V DC and 12V DC at the charge controller (230V only with optional voltage converter)
Components of the basicPremium-S 50W solar system 12V 24V
1 x Offgridtec monocrystalline 12V 50 Wp solar module
Rated power: 50 Wp, part number: 3-01-001260
Operating voltage (Vmp) 17.8 V, operating current (Imp) 2.81 A
equipped with 'high-quality monocrystalline cells
minimised power loss during shading due to integrated bypass diode
solid: frame made of anodised aluminium + specially hardened ESG solar glass
MC4 connector, dimensions (WxLxH): 650 x 505 x 30 mm, weight: 3.8 Kg
1 x PWM-10/24 10 Pro solar controller 12V/24V
max. charging current 10 A, max. PV power with 12V / 24V system: 130 W / 260 W
Modern, 3-stage PWM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: AGM, GEL, and liquid lead acid
Intuitive operation via 2 buttons directly on the unit
Large LCD display with numerous display options, including kWh meter
2 USB ports with a maximum output of 2.4A
Load output with numerous configuration options, e.g. for light control
Temperature-compensated battery charging (optional temperature sensor required)
1x 8m 2x6mm² solar connection cable controller/solar module
TWIN cable, Plug & Play - ready for immediate use
MC4 connectors on the solar module side, wire end ferrules on the charge controller side
High-quality solar cable: TWIN cable
Wire cross-section: 2x6mm², length: 8m
1x 1,5 2x6mm² 30 A battery connection cable controller/battery (Offgridtec)
Plug & Play - immediately ready for use
wire cross-section: 2x6mm², length: 1.5m
Including flat fuse holder with built-in 30 A ATO fuse
Wire end ferrules on charge controller side, M8 ring terminals on battery side
incl. battery pole terminals for connection to round pole terminals
Flexible and very easy to install
The system is very easy to install, even for people who have little experience with solar technology. The cables are all supplied plug & play, i.e. ready for connection. You only need to connect the components and the electricity production can begin.
Expandable, customisable
Wie jedes System von Offgridtec, kann auch die basicPremium-S an Ihre Anforderungen individuell angepasst und modifiziert werden. Unser technischer Vertrieb freut sich auf Ihre Anfrage. Eventuell anfallende Kosten sind beim Kundenservice zu erfragen.
Scope of delivery:
1x Offgridtec 4-01-002620 basicPremium-S 50W 12V 24V solar system
1x instruction manual
including all components listed above
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and October. The generated power is stored in the cycle-proof 122Ah agm battery - the high-quality charge controller with integrated display gives you information about the charge status of the battery while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 1000w (15min)
Features of the Autark M-Master
If required, module side expandable by 2 x 100w with low installation effort
Average daily yield between March and October: approx. 800wh (approx. 66Ah)
Plug & Play ready-to-connect system - plug together and go
Allows operation of 12v and 230v loads, as well as 5v usb consumers
usb charging possibility directly at the charge controller (max. 2,4A)
Easy to read lcd display informs about all operating parameters
Flexible mounting possibility thanks to 8m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb included)
Charge controller enables temperature compensated charging - temperature sensor included in delivery
Configurable 12v load output at the charge controller for loads up to max. 30a - suitable e.g. for lighting control
Application areas
This complete system can be used in many ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. The installation on the motor home is also conceivable - we also have the corresponding brackets and adhesive sets for the attachment.
Extensive connection options
230v ac 50hz 1000w (15min - 1000w / permanent - 800w / short time (starting currents) - 1600w) Schuko socket on the sine wave voltage converter
12v consumer output with 30a power directly at the charge controller
2 x usb charging port at the charge controller with max. 2.4a (total)
1 x usb charging port at the voltage converter with max. 1a power
Parts list - what's inside
2 x Offgridtec 100w V2 Solarpanel 23V black frame
1 x Pair of solar connector compatible junction boxes for parallel connection of the two solar modules
1 x 30a pwm charge controller with clear lcd display and usb charging possibility - the device also has a 30a load output and is easy to operate - all important parameters can be read on the display
1 x 122Ah agm battery with m8 screw terminal Dimensions: 406 x 174 x 233 mm(+5mm terminal) - the battery is absolutely maintenance free and leak proof and lasts up to 10 years depending on use
1 x 1000w 12v to 230v sine wave voltage converter with a shockproof socket incl. connection cable - the rated power of 1000w can be output by the device for 15 minutes - beyond that the inverter outputs 800w and can handle short time starting currents up to 1600w
1 x 8m 6mm² professional connection cable solar module to charge controller with original Stäubli solar-connectors and high quality Lapp Ölflex 2x6mm² solar cable
1 x 1.5m 10mm² professional battery connection cable with MIDI fuse holder, 40a MIDI fuse and m8 ring terminals for connection between charge controller and battery
1 x Temperature sensor with 3m length for connection of the controller to the batrie
1 x 1m 25mm² connection cable from inverter to battery (included with the voltage converter)
1 x Fuse holder + 125A Mega fuse for installation between voltage transformer and battery positive pole for protection against short circuit
Roof mount for the solar module
Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne etc.)
Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
Fastening kit for pitched roof installation on Bieberschwanz tiles
Scope of delivery:
1x Solaranlage Autark M-Master with 2x100w solar panel, 30a pwm charge controller with lcd display and usb ports, 1000w sine wave voltage converter, 122Ah agm battery, user manuals
€741.44*
€623.06**
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and O...
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and October. The generated power is stored in the cycle-proof 122Ah agm battery - the high-quality charge controller with integrated display gives you information about the charge status of the battery while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 1000w (15min)
Features of the Autark M-Master
If required, module side expandable by 2 x 100w with low installation effort
Average daily yield between March and October: approx. 800wh (approx. 66Ah)
Plug & Play ready-to-connect system - plug together and go
Allows operation of 12v and 230v loads, as well as 5v usb consumers
usb charging possibility directly at the charge controller (max. 2,4A)
Easy to read lcd display informs about all operating parameters
Flexible mounting possibility thanks to 8m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb included)
Charge controller enables temperature compensated charging - temperature sensor included in delivery
Configurable 12v load output at the charge controller for loads up to max. 30a - suitable e.g. for lighting control
Application areas
This complete system can be used in many ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. The installation on the motor home is also conceivable - we also have the corresponding brackets and adhesive sets for the attachment.
Extensive connection options
230v ac 50hz 1000w (15min - 1000w / permanent - 800w / short time (starting currents) - 1600w) Schuko socket on the sine wave voltage converter
12v consumer output with 30a power directly at the charge controller
2 x usb charging port at the charge controller with max. 2.4a (total)
1 x usb charging port at the voltage converter with max. 1a power
Parts list - what's inside
2 x Offgridtec 100w V2 Solarpanel 23V black frame
1 x Pair of solar connector compatible junction boxes for parallel connection of the two solar modules
1 x 30a pwm charge controller with clear lcd display and usb charging possibility - the device also has a 30a load output and is easy to operate - all important parameters can be read on the display
1 x 122Ah agm battery with m8 screw terminal Dimensions: 406 x 174 x 233 mm(+5mm terminal) - the battery is absolutely maintenance free and leak proof and lasts up to 10 years depending on use
1 x 1000w 12v to 230v sine wave voltage converter with a shockproof socket incl. connection cable - the rated power of 1000w can be output by the device for 15 minutes - beyond that the inverter outputs 800w and can handle short time starting currents up to 1600w
1 x 8m 6mm² professional connection cable solar module to charge controller with original Stäubli solar-connectors and high quality Lapp Ölflex 2x6mm² solar cable
1 x 1.5m 10mm² professional battery connection cable with MIDI fuse holder, 40a MIDI fuse and m8 ring terminals for connection between charge controller and battery
1 x Temperature sensor with 3m length for connection of the controller to the batrie
1 x 1m 25mm² connection cable from inverter to battery (included with the voltage converter)
1 x Fuse holder + 125A Mega fuse for installation between voltage transformer and battery positive pole for protection against short circuit
Roof mount for the solar module
Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne etc.)
Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
Fastening kit for pitched roof installation on Bieberschwanz tiles
Scope of delivery:
1x Solaranlage Autark M-Master with 2x100w solar panel, 30a pwm charge controller with lcd display and usb ports, 1000w sine wave voltage converter, 122Ah agm battery, user manuals
Die Offgridtec 200W Garten-Solaranlage (MPN 016535) ist eine praktische Möglichkeit, um Ihre Gartenbeleuchtung, Teichpumpe oder andere kleine Elektrogeräte mit Strom zu versorgen. Das System enthält alles, was für eine autarke Stromversorgung benötigt wird und kann dank unserem Plug & Play Prinzip schnell und unkompliziert installiert werden. Sie können damit ohne Verbindung zum Hausnetz, Klein-Verbraucher flexibel mit Strom versorgen.
Im Lieferumfang sind alle Komponenten zur Versorgung von 12V- und 230V-Verbrauchern enthalten. Da keine Verbindung zum öffentlichen Stromnetz benötigt wird, müssen auch keine Verbindungen oder Kabel vom Haus zum Installationsort verlegt werden.
Vorteile der Offgridtec Garten-Solaranlage
Unabhängigkeit von Netzstrom
Montage an der Wand oder Aufstellung auf dem Boden möglich
Zyklenfester AGM-Akku – 100% wartungsfrei
Monokristallines Solarmodul mit extrem widerstandsfähigem ESG-Glas
Bewährte Offgridtec-Qualität
Alle Komponenten optimal aufeinander abgestimmt
Schnell und einfach installiert
Geräuscharm im laufenden Betrieb
Das Komplettsystem enthält:
2x Offgridtec 100W V2 Mono Solarmodul 23V Black Frame
1x Offgridtec AGM 122Ah 12V Solarbatterie
1x Offgridtec PWM Pro Laderegler 20A 12V/24V USB
1x Offgridtec PSI Spannungswandler 500W 12V auf 230V Sinus
2x Offgridtec Universal-Modulhalterung für Boden- und Wandmontage
1x Offgridtec Abzweigbuchsen Y-Stecker (Paar)
1x 5m 6mm² Verbindungskabel Solarmodul zu Solarladeregler
1x 1,5m 6mm² Batteriekabel mit 15A Sicherung M8-Ringkabelschuh
Monokristallines 100W Solarmodul
Unser 100W V2 Solarmodul arbeitet mit monokristallinen PERC Solarzellen und liefert einen hohen Wirkungsgrad von knapp 22,3%. Durch die hohe Betriebsspannung von 23V ist es perfekt für 12V-Systeme geeignet. Das extrem widerstandsfähige ESG-Glas macht das Modul auch bei widrigen Umweltbedingungen einsetzbar. Die 2 integrierten Bypass-Dioden sorgen für einen minimierten Leistungsabfall bei Beschattung.
Modulleistung (Pmax): 100W
Arbeitsspannung (Vmp): 23,9V
max. Strom (Imp): 4,2A
Leerlaufspannung (Voc): 28V
Kurzschlussstrom (Isc): 4,4A
Abmessungen: 925 x 560 x 35 mm
Gewicht: 6,22 kg
Zyklenfester 122Ah AGM-Solarspeicher
Die Offgridtec AGM-Solarbatterien sind explizit für den Einsatz in Solaranlagen ausgelegt und sind dank der AGM-Technologie herkömmlichen Blei-Säure-Batterien deutlich überlegen. Sie sind absolut sicher vor Auslaufen, egal in welcher Position die Batterie steht und können tiefer entladen werden als Blei-Säure Batterien. Je nach Nutzungsverhalten haben die Batterien eine Lebenserwartung von bis zu 10 Jahren und sind über die gesamte Lebensdauer zu 100% wartungsfrei.
Speicherkapazität 20HR (6,1A, 1,75V): 122Ah
Lade-Spannung zyklische Nutzung: 14,4V-14,9V
max. Ladestrom: 30A
Abmessungen: 406 x 174 x 233 mm (+5mm Terminal)
Gewicht: 37kg
Solarladeregler mit PWM-Technologie
Der PWM-Pro ist ein Solarladeregler mit einer maximalen Ladeleistung von 20A und eignet sich sowohl für 12V, als auch für 24V Solaranlagen. Die moderne, 3-stufige PWM-Modulation sorgt für eine schonende und effiziente Ladung der AGM-Batterie. Das Gerät ist intuitiv über 2 Knöpfe direkt am Gerät bedienbar und das große LCD-Display bietet zahlreiche Anzeigemöglichkeiten, inklusive kWh-Meter. Am Produkt befinden sich ebenfalls 2 USB-Ports mit einer Ausgangsleistung von bis zu 2,4A. Die integrierten Geräte- und Batterieschutzfunktionen sorgen für einen einwandfreien Betrieb der Solaranlage.
Eingangsspannung: 9V-32V
Max. Ladestrom: 20A
Schutzart: IP30
Abmessungen: 160 x 94,9 x 49,3 mm
Gewicht: 0,35 kg
Sinus-Spannungswandler mit bis zu 1000W Spitzenleistung
Unser PSI 12-500 ist ein fortschrittlicher Sinus-Spannungswandler mit moderner SPWM-Technologie und gibt eine perfekte Sinuswelle aus. Er liefert eine Dauerleistung von 400W und kann für maximal 15 Minuten bis zu 500W ausgeben. Das Gerät verfügt über zahlreiche Schutzmechanismen und galvanisch isolierte Ein- und Ausgänge. Für kurze Einschaltströme kann der PSI auch bis zu 1000W liefern. Neben dem integrierten Schuko-Ausgang bietet der Wandler auch einen USB-Port.
Eingangsspannungsbereich: 10,8-16V/DC
Ausgangsspannung: 230 V/AC (±5-7%)
Ausgangsfrequenz: 50/60 Hz ±0,1
Ausgangsleistung (Dauer/15 min/Spitze): 400W/500W/1000W
Max. Effizienz: 91%
Abmessungen: 232,2 x 132 x 74,5 mm
Gewicht: 1,7 kg
Modulhalterung für Boden- oder Wandmontage
Die Universal-Modulhalterung ermöglicht eine flexible Installation der enthaltenen Solarmodule. Die Neigung der Module kann bei Wand-Montage in einem Bereich von 45° bis 80° eingestellt werden, bei Aufständerung am Boden von 10° bis 45°. Die Halterung besteht aus Aluminium, was den Träger sehr leicht und korrosionsbeständig macht. Im Lieferumfang sind alle, zur Montage, nötigen Schrauben etc. enthalten.
€699.90*
€588.15**
Die Offgridtec 200W Garten-Solaranlage (MPN 016535) ist eine praktische Möglichkeit, um Ihre Gartenbeleuchtung, Teichpumpe oder andere kleine Ele...
Die Offgridtec 200W Garten-Solaranlage (MPN 016535) ist eine praktische Möglichkeit, um Ihre Gartenbeleuchtung, Teichpumpe oder andere kleine Elektrogeräte mit Strom zu versorgen. Das System enthält alles, was für eine autarke Stromversorgung benötigt wird und kann dank unserem Plug & Play Prinzip schnell und unkompliziert installiert werden. Sie können damit ohne Verbindung zum Hausnetz, Klein-Verbraucher flexibel mit Strom versorgen.
Im Lieferumfang sind alle Komponenten zur Versorgung von 12V- und 230V-Verbrauchern enthalten. Da keine Verbindung zum öffentlichen Stromnetz benötigt wird, müssen auch keine Verbindungen oder Kabel vom Haus zum Installationsort verlegt werden.
Vorteile der Offgridtec Garten-Solaranlage
Unabhängigkeit von Netzstrom
Montage an der Wand oder Aufstellung auf dem Boden möglich
Zyklenfester AGM-Akku – 100% wartungsfrei
Monokristallines Solarmodul mit extrem widerstandsfähigem ESG-Glas
Bewährte Offgridtec-Qualität
Alle Komponenten optimal aufeinander abgestimmt
Schnell und einfach installiert
Geräuscharm im laufenden Betrieb
Das Komplettsystem enthält:
2x Offgridtec 100W V2 Mono Solarmodul 23V Black Frame
1x Offgridtec AGM 122Ah 12V Solarbatterie
1x Offgridtec PWM Pro Laderegler 20A 12V/24V USB
1x Offgridtec PSI Spannungswandler 500W 12V auf 230V Sinus
2x Offgridtec Universal-Modulhalterung für Boden- und Wandmontage
1x Offgridtec Abzweigbuchsen Y-Stecker (Paar)
1x 5m 6mm² Verbindungskabel Solarmodul zu Solarladeregler
1x 1,5m 6mm² Batteriekabel mit 15A Sicherung M8-Ringkabelschuh
Monokristallines 100W Solarmodul
Unser 100W V2 Solarmodul arbeitet mit monokristallinen PERC Solarzellen und liefert einen hohen Wirkungsgrad von knapp 22,3%. Durch die hohe Betriebsspannung von 23V ist es perfekt für 12V-Systeme geeignet. Das extrem widerstandsfähige ESG-Glas macht das Modul auch bei widrigen Umweltbedingungen einsetzbar. Die 2 integrierten Bypass-Dioden sorgen für einen minimierten Leistungsabfall bei Beschattung.
Modulleistung (Pmax): 100W
Arbeitsspannung (Vmp): 23,9V
max. Strom (Imp): 4,2A
Leerlaufspannung (Voc): 28V
Kurzschlussstrom (Isc): 4,4A
Abmessungen: 925 x 560 x 35 mm
Gewicht: 6,22 kg
Zyklenfester 122Ah AGM-Solarspeicher
Die Offgridtec AGM-Solarbatterien sind explizit für den Einsatz in Solaranlagen ausgelegt und sind dank der AGM-Technologie herkömmlichen Blei-Säure-Batterien deutlich überlegen. Sie sind absolut sicher vor Auslaufen, egal in welcher Position die Batterie steht und können tiefer entladen werden als Blei-Säure Batterien. Je nach Nutzungsverhalten haben die Batterien eine Lebenserwartung von bis zu 10 Jahren und sind über die gesamte Lebensdauer zu 100% wartungsfrei.
Speicherkapazität 20HR (6,1A, 1,75V): 122Ah
Lade-Spannung zyklische Nutzung: 14,4V-14,9V
max. Ladestrom: 30A
Abmessungen: 406 x 174 x 233 mm (+5mm Terminal)
Gewicht: 37kg
Solarladeregler mit PWM-Technologie
Der PWM-Pro ist ein Solarladeregler mit einer maximalen Ladeleistung von 20A und eignet sich sowohl für 12V, als auch für 24V Solaranlagen. Die moderne, 3-stufige PWM-Modulation sorgt für eine schonende und effiziente Ladung der AGM-Batterie. Das Gerät ist intuitiv über 2 Knöpfe direkt am Gerät bedienbar und das große LCD-Display bietet zahlreiche Anzeigemöglichkeiten, inklusive kWh-Meter. Am Produkt befinden sich ebenfalls 2 USB-Ports mit einer Ausgangsleistung von bis zu 2,4A. Die integrierten Geräte- und Batterieschutzfunktionen sorgen für einen einwandfreien Betrieb der Solaranlage.
Eingangsspannung: 9V-32V
Max. Ladestrom: 20A
Schutzart: IP30
Abmessungen: 160 x 94,9 x 49,3 mm
Gewicht: 0,35 kg
Sinus-Spannungswandler mit bis zu 1000W Spitzenleistung
Unser PSI 12-500 ist ein fortschrittlicher Sinus-Spannungswandler mit moderner SPWM-Technologie und gibt eine perfekte Sinuswelle aus. Er liefert eine Dauerleistung von 400W und kann für maximal 15 Minuten bis zu 500W ausgeben. Das Gerät verfügt über zahlreiche Schutzmechanismen und galvanisch isolierte Ein- und Ausgänge. Für kurze Einschaltströme kann der PSI auch bis zu 1000W liefern. Neben dem integrierten Schuko-Ausgang bietet der Wandler auch einen USB-Port.
Eingangsspannungsbereich: 10,8-16V/DC
Ausgangsspannung: 230 V/AC (±5-7%)
Ausgangsfrequenz: 50/60 Hz ±0,1
Ausgangsleistung (Dauer/15 min/Spitze): 400W/500W/1000W
Max. Effizienz: 91%
Abmessungen: 232,2 x 132 x 74,5 mm
Gewicht: 1,7 kg
Modulhalterung für Boden- oder Wandmontage
Die Universal-Modulhalterung ermöglicht eine flexible Installation der enthaltenen Solarmodule. Die Neigung der Module kann bei Wand-Montage in einem Bereich von 45° bis 80° eingestellt werden, bei Aufständerung am Boden von 10° bis 45°. Die Halterung besteht aus Aluminium, was den Träger sehr leicht und korrosionsbeständig macht. Im Lieferumfang sind alle, zur Montage, nötigen Schrauben etc. enthalten.
Powerful all-in-one complete solar system
The Autark XL-Master is one of the larger complete systems of the Autark family and delivers an average daily yield of 1200 watt hours between March and October. The generated electricity is stored in the cycle-proof 154Ah AGM battery - the high-quality charge controller with integrated display provides you with information about the battery's state of charge while your 230V consumers can be operated at the sine voltage converter. Of course, the whole system is supplied with a professional connection cable kit - plug it together and get started. The system is suitable for a whole range of applications - from 12V lighting, charging laptop, mobile phone and camera batteries and other small consumers, to 230V household appliances with a maximum continuous power of 1500W (15min).
Features of the Autark XL-Master
If required, can be extended by 2 x 150W on the module side with little installation effort.
Average daily yield between March and October: approx. 1200Wh (approx. 100Ah)
Plug & Play ready-to-connect system - plug together and go
Allows operation of 12V and 230V loads, as well as 5V USB consumers
USB charging possibility directly at the charge controller (max. 2.4A)
Easy-to-read LCD display provides information on all operating parameters
Flexible installation thanks to 8m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage cut-off, short-circuit protection, reverse polarity protection, etc.
RS485 communication port on the voltage transformer offers extensive configuration options via PC (interface cable RS485 to USB included)
Charge controller enables temperature-compensated charging - temperature sensor included in delivery
Configurable 12V load output on the charge controller for loads up to max. 45A - suitable e.g. for lighting control
Areas of application
This complete system can be used in a variety of ways. Whether as a stationary system on a mountain hut or in an allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of mobile phones and laptops, is easy with this system. Installation on a motor home is also conceivable - we also have the corresponding brackets and adhesive sets for mounting.
Extensive connection options
230V AC 50HZ 1500W (15min - 1500W / permanent - 1200W) Schuko socket on the sine wave voltage converter
12V consumer output with 45A power directly at the charge controller
2 x USB charging port on the charge controller with max. 2.4A (total)
1 x USB charging port on the voltage converter with max. 1A output
Parts list - what's inside
2 x 150W Offgridtec MONO Solar Panel V2 23V Black Frame - 018395 - 1350 x 590 x 35 mm
1 x 1 pair of solar connectors compatible junction sockets for connecting the two solar modules in parallel
1 x 45A PWM charge controller with clear LCD display and USB charging option - the unit also has a 45A load output and is easy to operate - all important parameters can be read on the display
1 x 154Ah AGM battery with M8 screw terminal terminal Dimensions: 485 x 172 x 240mm (+5mm terminal) - the battery is absolutely maintenance-free and leak-proof and lasts up to 10 years depending on use
1 x 1500W 12V to 230V sine wave voltage converter with a shock-proof socket incl. connection cable - the rated power of 1500W can be output by the unit for 15 minutes - in addition, the inverter has an output of 1200W and can handle short-time starting currents of up to 2400W
1 x 8m 6mm² professional connection cable solar module to charge controller with solar connector plug
1 x 1.5m 10mm² battery connection cable with MIDI fuse holder and M8 ring terminals for connection between charge controller and battery
1 x Temperature sensor with 3m length for connecting the controller to the battery
1 x Battery connection cable 25mm² 40cm Ozone, UV and temperature resistant
1 x Fuse holder
1 x 150A Mega fuse For installation between voltage transformer and battery positive pole for protection against short circuit
1 x 50A Midi Fusse
Roof bracket for the solar module
As there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mounting as standard. This can, of course, be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Solarmodulhalter für Flachdach- oder Wandmontage
Fastening kit for pitched roof installation on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
Fixing kit for pitched roof mounting on beavertail tiles
Scope of delivery:
1x Solar system Autark XL-Master with 2x150W solar module, 45A PWM charge controller with LCD display and USB ports, 1500W sine wave voltage converter, 154Ah AGM battery, operating instructions
€891.31*
€749.00**
Powerful all-in-one complete solar system
The Autark XL-Master is one of the larger complete systems of the Autark family and delivers an average dai...
Powerful all-in-one complete solar system
The Autark XL-Master is one of the larger complete systems of the Autark family and delivers an average daily yield of 1200 watt hours between March and October. The generated electricity is stored in the cycle-proof 154Ah AGM battery - the high-quality charge controller with integrated display provides you with information about the battery's state of charge while your 230V consumers can be operated at the sine voltage converter. Of course, the whole system is supplied with a professional connection cable kit - plug it together and get started. The system is suitable for a whole range of applications - from 12V lighting, charging laptop, mobile phone and camera batteries and other small consumers, to 230V household appliances with a maximum continuous power of 1500W (15min).
Features of the Autark XL-Master
If required, can be extended by 2 x 150W on the module side with little installation effort.
Average daily yield between March and October: approx. 1200Wh (approx. 100Ah)
Plug & Play ready-to-connect system - plug together and go
Allows operation of 12V and 230V loads, as well as 5V USB consumers
USB charging possibility directly at the charge controller (max. 2.4A)
Easy-to-read LCD display provides information on all operating parameters
Flexible installation thanks to 8m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage cut-off, short-circuit protection, reverse polarity protection, etc.
RS485 communication port on the voltage transformer offers extensive configuration options via PC (interface cable RS485 to USB included)
Charge controller enables temperature-compensated charging - temperature sensor included in delivery
Configurable 12V load output on the charge controller for loads up to max. 45A - suitable e.g. for lighting control
Areas of application
This complete system can be used in a variety of ways. Whether as a stationary system on a mountain hut or in an allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of mobile phones and laptops, is easy with this system. Installation on a motor home is also conceivable - we also have the corresponding brackets and adhesive sets for mounting.
Extensive connection options
230V AC 50HZ 1500W (15min - 1500W / permanent - 1200W) Schuko socket on the sine wave voltage converter
12V consumer output with 45A power directly at the charge controller
2 x USB charging port on the charge controller with max. 2.4A (total)
1 x USB charging port on the voltage converter with max. 1A output
Parts list - what's inside
2 x 150W Offgridtec MONO Solar Panel V2 23V Black Frame - 018395 - 1350 x 590 x 35 mm
1 x 1 pair of solar connectors compatible junction sockets for connecting the two solar modules in parallel
1 x 45A PWM charge controller with clear LCD display and USB charging option - the unit also has a 45A load output and is easy to operate - all important parameters can be read on the display
1 x 154Ah AGM battery with M8 screw terminal terminal Dimensions: 485 x 172 x 240mm (+5mm terminal) - the battery is absolutely maintenance-free and leak-proof and lasts up to 10 years depending on use
1 x 1500W 12V to 230V sine wave voltage converter with a shock-proof socket incl. connection cable - the rated power of 1500W can be output by the unit for 15 minutes - in addition, the inverter has an output of 1200W and can handle short-time starting currents of up to 2400W
1 x 8m 6mm² professional connection cable solar module to charge controller with solar connector plug
1 x 1.5m 10mm² battery connection cable with MIDI fuse holder and M8 ring terminals for connection between charge controller and battery
1 x Temperature sensor with 3m length for connecting the controller to the battery
1 x Battery connection cable 25mm² 40cm Ozone, UV and temperature resistant
1 x Fuse holder
1 x 150A Mega fuse For installation between voltage transformer and battery positive pole for protection against short circuit
1 x 50A Midi Fusse
Roof bracket for the solar module
As there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mounting as standard. This can, of course, be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Solarmodulhalter für Flachdach- oder Wandmontage
Fastening kit for pitched roof installation on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
Fixing kit for pitched roof mounting on beavertail tiles
Scope of delivery:
1x Solar system Autark XL-Master with 2x150W solar module, 45A PWM charge controller with LCD display and USB ports, 1500W sine wave voltage converter, 154Ah AGM battery, operating instructions
Powerful All-in-One Complete Solar System
The Autark XXL-Master is one of the larger complete systems of the Autark family and delivers an average daily yield of 2400 watt hours between March and October. The generated power is stored in the cycle-proof 260Ah agm battery - the high quality charge controller with integrated display gives you information about the battery charge status while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 2000w
Features of the Autark XL-Master
Average daily yield between March and October: approx. 2400Wh (approx. 200Ah)
Plug & Play ready-to-connect system - plug it together and go
Allows operation of 12v and 230v loads, as well as 5v usb consumers
usb charging possibility directly at the charge controller (max. 2,4A)
Easy to read lcd display informs about all operating parameters
Flexible mounting possibility thanks to 10m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb included)
Charge controller enables temperature compensated charging - temperature sensor included in delivery
Configurable 12v load output at the charge controller for loads up to max. 45a - suitable e.g. for lighting control
Application areas
This complete system can be used in many different ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. Installation on the motor home is also conceivable - we also carry the corresponding brackets and adhesive sets for mounting.
Extensive connection options
230v ac 50hz 2000w (permanent 2000w - peak power 4000w) Schuko socket at the sine wave voltage converter
12v consumer output with 45a power directly at the charge controller
2 x usb charging port at the charge controller with max. 2.4a (total)
1 x usb charging port at the voltage converter with max. 1a power
Parts list - what's inside
4 x 150W Offgridtec MONO Solar Panel V2 23V Black Frame - 018395 - 1350 x 590 x 35 mm
1 x ready made cable harness with Junction boxes and Connecting cablesfor connection of all modules
1 x 45a pwm charge controller with clear lcd display and usb charging possibility - the device also has a 45a load output and is easy to operate - all important parameters can be read on the display
1 x Offgridtec AGM 260Ah 20HR 12V solar battery with M8 screw terminal - dimensions: 520 x 268 x 220mm (+29mm terminal) - the battery is absolutely maintenance-free and leak-proof and lasts up to 10 years depending on use
1 x 2000w 12v to 230v sine wave voltage converter with an earthed socket - it outputs a constant continuous power of 2000w - and can handle short time starting currents up to 4000w
1 x 10m 10mm² professional connection cable solar module to charge controller with original Stäubli mc4 connectors and high quality Lapp Ölflex 2x10mm² solar cable
1 x 1.5m 10mm² professional battery connection cable with MIDI fuse holder and 50a MIDI fuse and m8 ring terminals for the connection between charge controller and battery
1 x Temperature sensor with 3m length for connection of the controller to the battery
1 x 1m 35mm² connection cable from inverter to battery (fuse holder included with the voltage converter)
1 xHolder for Mega fuse +250a Mega fuse for installation between voltage transformer and battery positive pole for protection against short circuit
Roof mount for the solar module
Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne etc.)
Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
Fastening kit for pitched roof installation on Bieberschwanz tiles
Scope of delivery:
1x Solaranlage Autark XXL-Master with 4x150W solar panel, 45a pwm charge controller with lcd display and usb ports, 2000w sine wave voltage transformer, 260Ah agm battery, user manuals
€1,500.17*
€1,260.65**
Powerful All-in-One Complete Solar System
The Autark XXL-Master is one of the larger complete systems of the Autark family and delivers an average da...
Powerful All-in-One Complete Solar System
The Autark XXL-Master is one of the larger complete systems of the Autark family and delivers an average daily yield of 2400 watt hours between March and October. The generated power is stored in the cycle-proof 260Ah agm battery - the high quality charge controller with integrated display gives you information about the battery charge status while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 2000w
Features of the Autark XL-Master
Average daily yield between March and October: approx. 2400Wh (approx. 200Ah)
Plug & Play ready-to-connect system - plug it together and go
Allows operation of 12v and 230v loads, as well as 5v usb consumers
usb charging possibility directly at the charge controller (max. 2,4A)
Easy to read lcd display informs about all operating parameters
Flexible mounting possibility thanks to 10m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb included)
Charge controller enables temperature compensated charging - temperature sensor included in delivery
Configurable 12v load output at the charge controller for loads up to max. 45a - suitable e.g. for lighting control
Application areas
This complete system can be used in many different ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. Installation on the motor home is also conceivable - we also carry the corresponding brackets and adhesive sets for mounting.
Extensive connection options
230v ac 50hz 2000w (permanent 2000w - peak power 4000w) Schuko socket at the sine wave voltage converter
12v consumer output with 45a power directly at the charge controller
2 x usb charging port at the charge controller with max. 2.4a (total)
1 x usb charging port at the voltage converter with max. 1a power
Parts list - what's inside
4 x 150W Offgridtec MONO Solar Panel V2 23V Black Frame - 018395 - 1350 x 590 x 35 mm
1 x ready made cable harness with Junction boxes and Connecting cablesfor connection of all modules
1 x 45a pwm charge controller with clear lcd display and usb charging possibility - the device also has a 45a load output and is easy to operate - all important parameters can be read on the display
1 x Offgridtec AGM 260Ah 20HR 12V solar battery with M8 screw terminal - dimensions: 520 x 268 x 220mm (+29mm terminal) - the battery is absolutely maintenance-free and leak-proof and lasts up to 10 years depending on use
1 x 2000w 12v to 230v sine wave voltage converter with an earthed socket - it outputs a constant continuous power of 2000w - and can handle short time starting currents up to 4000w
1 x 10m 10mm² professional connection cable solar module to charge controller with original Stäubli mc4 connectors and high quality Lapp Ölflex 2x10mm² solar cable
1 x 1.5m 10mm² professional battery connection cable with MIDI fuse holder and 50a MIDI fuse and m8 ring terminals for the connection between charge controller and battery
1 x Temperature sensor with 3m length for connection of the controller to the battery
1 x 1m 35mm² connection cable from inverter to battery (fuse holder included with the voltage converter)
1 xHolder for Mega fuse +250a Mega fuse for installation between voltage transformer and battery positive pole for protection against short circuit
Roof mount for the solar module
Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne etc.)
Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
Fastening kit for pitched roof installation on Bieberschwanz tiles
Scope of delivery:
1x Solaranlage Autark XXL-Master with 4x150W solar panel, 45a pwm charge controller with lcd display and usb ports, 2000w sine wave voltage transformer, 260Ah agm battery, user manuals
Our low-cost 150 Watt solar set for do-it-yourself installation. This low-cost version does without prefabricated cables and relies on solid charge controller technology. The result is an unbeatable package price for which you receive a 150W Offgridtec Mono solar module, a Victron PWM Light 20 A charge controller as well as 15m of 4mm² solar cable, 1 pair of MC-4 plugs, 1 pair of battery terminals and the Offgridtec Basic battery connection cable with M8 ring terminals for assembling your system.
Technical highlights of the 150W 12V basic starter complete set
Powerful: Set works with the 150W V2 module from Offgridtec and is equipped with monocrystalline cells, only modules with power tolerances in the + range are supplied.
flexible: the PWM-Light 20A 12V / 24V charge controller is ideal for leisure and hobby applications. It has a controllable load output with 20A power via which you can control e.g. lighting or light via adjustable timers.
Expandable: a second module can easily be connected to the 20A controller if you want to expand the solar power in the future. In 24V mode, the system can even be expanded to a total of 600W solar power.
Versatile applications: The kit is the ideal starting point for building a 150W garden solar system and, with optional mounting components, is also great for caravan solar systems
Solid solar power yields: The 150W panel produces an average of 600Wh of clean energy per day in summer. More on sunny days, less on rainy days. Other factors (inclination, temperature, pollution, latitude, weather conditions, etc.) also affect the performance of a solar system.
Contains all cables required for commissioning: The kit is equipped with all cables and plugs required for commissioning the system.
The 150 Watt Basic Starter Solar Kit - what's inside
1 x 150W V2 mono solar panel, Offgridtec 018395
1 x 20A 12V 24V PWM Light Solar charger, Victron Energy SCC010020020
1 x 1,5m 2x6mm² Basic battery connection cable, Offgridtec 002180
1 x 15m solar cable 4mm² from Lapp-Kabel
1 pair of MC4 solar connectors from Multi-Contact (4mm²)
1 pair of wire end ferrules
1 pair of battery terminals
Information on the cables and small parts (plugs)
In addition to the module and charge controller, the set also contains all the plugs, cables and small parts you need to make the connection cables for your solar system.
The following parts belong to the module connection cable:
- 15m solar cable 4mm², MC4 plug, wire end sleeves 4mm²
The following parts belong to the battery connection cable
- 2 x 1.5m 6mm² solar cable, 6mm² wire end ferrules, M8 ring cable lugs and battery pole terminals
Tip: If you prefer not to do it yourself or do not have the appropriate specialist tools, you can find complete sets with ready-made professional connection cables in various lengths in our shop in the category "Accessories / Solar modules".
Questions or customisation requests? Contact us at +49 (0) 8721 77861-87 or write to us at [email protected].
€181.71*
€152.70**
Our low-cost 150 Watt solar set for do-it-yourself installation. This low-cost version does without prefabricated cables and relies on solid charge co...
Our low-cost 150 Watt solar set for do-it-yourself installation. This low-cost version does without prefabricated cables and relies on solid charge controller technology. The result is an unbeatable package price for which you receive a 150W Offgridtec Mono solar module, a Victron PWM Light 20 A charge controller as well as 15m of 4mm² solar cable, 1 pair of MC-4 plugs, 1 pair of battery terminals and the Offgridtec Basic battery connection cable with M8 ring terminals for assembling your system.
Technical highlights of the 150W 12V basic starter complete set
Powerful: Set works with the 150W V2 module from Offgridtec and is equipped with monocrystalline cells, only modules with power tolerances in the + range are supplied.
flexible: the PWM-Light 20A 12V / 24V charge controller is ideal for leisure and hobby applications. It has a controllable load output with 20A power via which you can control e.g. lighting or light via adjustable timers.
Expandable: a second module can easily be connected to the 20A controller if you want to expand the solar power in the future. In 24V mode, the system can even be expanded to a total of 600W solar power.
Versatile applications: The kit is the ideal starting point for building a 150W garden solar system and, with optional mounting components, is also great for caravan solar systems
Solid solar power yields: The 150W panel produces an average of 600Wh of clean energy per day in summer. More on sunny days, less on rainy days. Other factors (inclination, temperature, pollution, latitude, weather conditions, etc.) also affect the performance of a solar system.
Contains all cables required for commissioning: The kit is equipped with all cables and plugs required for commissioning the system.
The 150 Watt Basic Starter Solar Kit - what's inside
1 x 150W V2 mono solar panel, Offgridtec 018395
1 x 20A 12V 24V PWM Light Solar charger, Victron Energy SCC010020020
1 x 1,5m 2x6mm² Basic battery connection cable, Offgridtec 002180
1 x 15m solar cable 4mm² from Lapp-Kabel
1 pair of MC4 solar connectors from Multi-Contact (4mm²)
1 pair of wire end ferrules
1 pair of battery terminals
Information on the cables and small parts (plugs)
In addition to the module and charge controller, the set also contains all the plugs, cables and small parts you need to make the connection cables for your solar system.
The following parts belong to the module connection cable:
- 15m solar cable 4mm², MC4 plug, wire end sleeves 4mm²
The following parts belong to the battery connection cable
- 2 x 1.5m 6mm² solar cable, 6mm² wire end ferrules, M8 ring cable lugs and battery pole terminals
Tip: If you prefer not to do it yourself or do not have the appropriate specialist tools, you can find complete sets with ready-made professional connection cables in various lengths in our shop in the category "Accessories / Solar modules".
Questions or customisation requests? Contact us at +49 (0) 8721 77861-87 or write to us at [email protected].
Powerful All-in-One Complete Solar System
The 24v Autark XXL-Master is one of the larger complete systems of the Autark family and delivers an average daily yield of 4800 watt hours between March and October. The generated power is stored in two series connected 260Ah agm batteries - the high quality charge controller with integrated display gives you information about the state of charge of the battery while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 24v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 3000w (15min)
Features of the 24v Autarkic XXL-Master
Average daily output between March and October: approx. 4.8KW
Plug & Play ready to connect system - plug together and go
Allows operation of 24v and 230v loads, as well as 5v usb consumers
usb charging possibility directly at the charge controller (max. 2,4A)
Easy to read lcd display informs about all operating parameters
Flexible mounting possibility thanks to 8m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb not included)
Charge controller enables temperature compensated charging - temperature sensor included in scope of delivery
Configurable 12/24v load output at the charge controller for loads up to max. 45a - suitable e.g. for lighting control
Application areas
This complete system can be used in many ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. The installation on the motor home is also conceivable - we also have the corresponding brackets and adhesive sets for the attachment.
Extensive connection options
230v ac 50hz 2000w (15min - 3000w / peak - 6000w) sine wave voltage converter
24v consumer output with 45a power directly on the charge controller
2 x usb charge port on the charge controller with max. 2.4a (total)
1 x usb charge port at the voltage converter with max. 1a power
Parts list - what's inside
6 x 200w monocrystalline solar panel of Offgridtec1500 x 680 x 35mm
1 x 45a pwm charge controller with clear lcd display and usb charging possibility - the unit also has a 45a load output and is easy to operate - all important parameters can be read on the display
2 x 260Ah agm battery with m8 screw terminal Dimensions: 520 x 268 x 220mm(+29mm terminal) - the batteries are absolutely maintenance free and leak proof and last up to 10 years depending on usage
1 x 3000w 24v to 230v sine wave voltage converter- the rated power of 3000w can be output by the device for 15 minutes - beyond that the inverter can handle short time starting currents up to 6000w
1 x 10m 10mm² professional connection cable solar module to charge controller with original Stäubli mc4 connectors and high quality Lapp Ölflex 1x10mm² solar cable (ready to connect cable harness to connect the 6 modules)
1 x 1.5m 10mm² professional battery connection cablewith MIDI fuse holder, 50a MIDI fuse and m8 ring terminals for the connection between charge controller and battery
1 x Temperature sensor with 3m length for connection of the controller to the battery
1 x 1m 35mm² connection cable from inverter to battery
1 x Fuse holder + 150A Mega fuse+ short connection cable for installation between voltage transformer and battery positive pole for protection against short circuit
1 x Battery jumper for connection from positive pole battery 1 to negative pole battery 2 (serial connection to 24v)
Roof mount for the solar module
Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting (6x needed)
Mounting kit for pitched roof mounting on roof tiles, Frankfurter Pfanne etc. (2x needed)
Fastening kit for pitched roof installation on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure (2x needed)
Fixing kit for pitched roof mounting on plain tiles (2x needed)
Scope of delivery:
1x 24v Solaranlage Autark XXL-Master with 6x 200w solar panel, 45a pwm charge controller with lcd display and usb ports, 3000w sine wave voltage converter, 2 x 260Ah agm rechargeable battery, user manuals
€2,346.92*
€1,972.20**
Powerful All-in-One Complete Solar System
The 24v Autark XXL-Master is one of the larger complete systems of the Autark family and delivers an averag...
Powerful All-in-One Complete Solar System
The 24v Autark XXL-Master is one of the larger complete systems of the Autark family and delivers an average daily yield of 4800 watt hours between March and October. The generated power is stored in two series connected 260Ah agm batteries - the high quality charge controller with integrated display gives you information about the state of charge of the battery while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 24v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 3000w (15min)
Features of the 24v Autarkic XXL-Master
Average daily output between March and October: approx. 4.8KW
Plug & Play ready to connect system - plug together and go
Allows operation of 24v and 230v loads, as well as 5v usb consumers
usb charging possibility directly at the charge controller (max. 2,4A)
Easy to read lcd display informs about all operating parameters
Flexible mounting possibility thanks to 8m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb not included)
Charge controller enables temperature compensated charging - temperature sensor included in scope of delivery
Configurable 12/24v load output at the charge controller for loads up to max. 45a - suitable e.g. for lighting control
Application areas
This complete system can be used in many ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. The installation on the motor home is also conceivable - we also have the corresponding brackets and adhesive sets for the attachment.
Extensive connection options
230v ac 50hz 2000w (15min - 3000w / peak - 6000w) sine wave voltage converter
24v consumer output with 45a power directly on the charge controller
2 x usb charge port on the charge controller with max. 2.4a (total)
1 x usb charge port at the voltage converter with max. 1a power
Parts list - what's inside
6 x 200w monocrystalline solar panel of Offgridtec1500 x 680 x 35mm
1 x 45a pwm charge controller with clear lcd display and usb charging possibility - the unit also has a 45a load output and is easy to operate - all important parameters can be read on the display
2 x 260Ah agm battery with m8 screw terminal Dimensions: 520 x 268 x 220mm(+29mm terminal) - the batteries are absolutely maintenance free and leak proof and last up to 10 years depending on usage
1 x 3000w 24v to 230v sine wave voltage converter- the rated power of 3000w can be output by the device for 15 minutes - beyond that the inverter can handle short time starting currents up to 6000w
1 x 10m 10mm² professional connection cable solar module to charge controller with original Stäubli mc4 connectors and high quality Lapp Ölflex 1x10mm² solar cable (ready to connect cable harness to connect the 6 modules)
1 x 1.5m 10mm² professional battery connection cablewith MIDI fuse holder, 50a MIDI fuse and m8 ring terminals for the connection between charge controller and battery
1 x Temperature sensor with 3m length for connection of the controller to the battery
1 x 1m 35mm² connection cable from inverter to battery
1 x Fuse holder + 150A Mega fuse+ short connection cable for installation between voltage transformer and battery positive pole for protection against short circuit
1 x Battery jumper for connection from positive pole battery 1 to negative pole battery 2 (serial connection to 24v)
Roof mount for the solar module
Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting (6x needed)
Mounting kit for pitched roof mounting on roof tiles, Frankfurter Pfanne etc. (2x needed)
Fastening kit for pitched roof installation on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure (2x needed)
Fixing kit for pitched roof mounting on plain tiles (2x needed)
Scope of delivery:
1x 24v Solaranlage Autark XXL-Master with 6x 200w solar panel, 45a pwm charge controller with lcd display and usb ports, 3000w sine wave voltage converter, 2 x 260Ah agm rechargeable battery, user manuals
The Offgridtec 440w Solaranlage with 30l Fothermo boiler (mpn 4-01-014145) is the perfect solar set for self-sufficient hot water supply in your garden or mountain hut and really leaves nothing to be desired. No specialist is required for installation and the installation of a solar module is done in a few simple steps. 440w Solaranlage with 30l Fothermo boiler complete set The set contains all the components you need for your hot water supply. You have hot water in the sink, shower or kitchen. No connection to the mains is required. Components of the Offgridtec 440w Solaranlage with 30l Fothermo boiler 1xJinko Tiger Neo 440w Blackframe solar module N-type 1x Fothermo Photovoltaic water boiler 30 liters - Water heater 1x 5m 2x6mm² solar connector connection cable Fothermo Photovoltaic water boiler 30 liters - water heater With the 10L water heater from Fothermo you can produce your hot water with sustainable and cost-effective solar power. The solar modules can be connected in just a few seconds and provide you with a reliable hot water supply. Technical data Fothermo 30l water boiler Volume: 30 liters max. heat output: 550W max. current: 15.5A Protection class: ip 24 Energy efficiency class: A+ Dimensions: 400 x 400 x 600 mm Weight: 15 kg The Jinko Tiger Neo 440w Blackframe solar module The Jinko Tiger Neo N-Type is a 440w solar module with monocrystalline cells and N-type technology. The solar cells use super multi-busbar technology. This efficiently reduces the loss due to microcracks, reduces the current transmission path by 50% and improves cell efficiency. The module is manufactured using Hot 2.0 technology. Technical data Jinko Tiger Neo 440w solar module Module voltage (Vmp): 32.81 V Open circuit voltage (Voc): 39.38 V max. current (Imp): 13.41 A Short-circuit current (Isc): 13.86 A max. system voltage: 10000/1500 v/dc (IEC) permissible ambient temperature: -40°C - +85°C Dimensions: 1762 x 1134 x 30 mm Weight: 22 kg Scope of delivery: 1x Jinko Tiger Neo 440w Blackframe solar module 1x Fothermo Photovoltaic water boiler 30 liters - water heater 1x 5m 2x6mm² mc4 to mc4 connection cable
€618.09*
€519.40**
The Offgridtec 440w Solaranlage with 30l Fothermo boiler (mpn 4-01-014145) is the perfect solar set for self-sufficient hot water supply in your garde...
The Offgridtec 440w Solaranlage with 30l Fothermo boiler (mpn 4-01-014145) is the perfect solar set for self-sufficient hot water supply in your garden or mountain hut and really leaves nothing to be desired. No specialist is required for installation and the installation of a solar module is done in a few simple steps. 440w Solaranlage with 30l Fothermo boiler complete set The set contains all the components you need for your hot water supply. You have hot water in the sink, shower or kitchen. No connection to the mains is required. Components of the Offgridtec 440w Solaranlage with 30l Fothermo boiler 1xJinko Tiger Neo 440w Blackframe solar module N-type 1x Fothermo Photovoltaic water boiler 30 liters - Water heater 1x 5m 2x6mm² solar connector connection cable Fothermo Photovoltaic water boiler 30 liters - water heater With the 10L water heater from Fothermo you can produce your hot water with sustainable and cost-effective solar power. The solar modules can be connected in just a few seconds and provide you with a reliable hot water supply. Technical data Fothermo 30l water boiler Volume: 30 liters max. heat output: 550W max. current: 15.5A Protection class: ip 24 Energy efficiency class: A+ Dimensions: 400 x 400 x 600 mm Weight: 15 kg The Jinko Tiger Neo 440w Blackframe solar module The Jinko Tiger Neo N-Type is a 440w solar module with monocrystalline cells and N-type technology. The solar cells use super multi-busbar technology. This efficiently reduces the loss due to microcracks, reduces the current transmission path by 50% and improves cell efficiency. The module is manufactured using Hot 2.0 technology. Technical data Jinko Tiger Neo 440w solar module Module voltage (Vmp): 32.81 V Open circuit voltage (Voc): 39.38 V max. current (Imp): 13.41 A Short-circuit current (Isc): 13.86 A max. system voltage: 10000/1500 v/dc (IEC) permissible ambient temperature: -40°C - +85°C Dimensions: 1762 x 1134 x 30 mm Weight: 22 kg Scope of delivery: 1x Jinko Tiger Neo 440w Blackframe solar module 1x Fothermo Photovoltaic water boiler 30 liters - water heater 1x 5m 2x6mm² mc4 to mc4 connection cable
Die Offgridtec 880W Solaranlage mit 80l Fothermo Boiler (MPN 4-01-014150) ist das perfekte Solar-Set für die autarke Warmwasserversorgung in Ihrer Garten- oder Berghütte und lässt wirklich keine Wünsche offen. Für die Installation wird kein Fachmann benötigt und die Installation eines Solarmoduls ist mit ein paar Handgriffen erledigt.
880W Solaranlage mit 80l Fothermo Boiler Komplett Set
Das Set enthält alle Komponenten, die Sie für die Warmwasserversorgung brauchen. Sie haben warmes Wasser im Waschbecken, in der Dusche oder in der Küche. Es ist kein Anschluss an das Stromnetz erforderlich.
Komponenten der Offgridtec 880W Solaranlage mit 80l Fothermo Boiler
2x Jinko Tiger Neo 440W Solarmodul
4x 2m 6mm² Solarsteckverbinder-Verbindungskabel Stecker / Buchse Verlängerung
1x Offgridtec 2-fach Abzweigbuchsen Y-Verbinder inkl. Kabelverlängerung (Paar)
1x Fothermo Photovoltaischer Wasser-Boiler 80 Liter - Warmwasserbereiter
1x 5m 2x6mm² Solarsteckverbinder Verbindungskabel
Fothermo Photovoltaischer Wasser-Boiler 80 Liter - Warmwasserbereiter
Mit dem 80L-Wasser-Boiler von Fothermo können Sie Ihr Warmwasser mit nachhaltigem und kostengünstigem Solarstrom erzeugen. Der Anschluss der Solarmodule ist mit ein paar Handgriffen in wenigen Sekunden erledigt und bietet Ihnen eine zuverlässige Warmwasserversorgung.
Technische Daten Fothermo 80l Wasser-Boiler
Volumen: 80 Liter
max. Heizleistung: 550W
max. Strom: 15,5A
Schutzklasse: IP 24
Energieeffizienzklasse: A+
Abmessungen: 470 x 480 x 900 mm
Gewicht: 25 kg
Das Jinko Tiger Neo 440W Blackframe Solarmodul
Das Jinko Tiger Neo N-Type ist ein 440W starkes Solarmodul mit monokristallinen Zellen und N-Typ-Technologie. Die Solarzellen nutzen die Super-Multi-Busbar-Technologie. Mit dieser wird der Verlust durch Microcracks effizient reduziert, der Stromübertragungsweg um 50% reduziert und die Zelleffizienz verbessert. Das Modul ist mit der Hot 2.0 Technologie gefertigt.
Technische Daten Jinko Tiger Neo 440W Solarmodul
Modulspannung (Vmp): 32,81 V
Leerlaufspannug (Voc): 39,38 V
max. Strom (Imp): 13,41 A
Kurzschlussstrom (Isc): 13,86 A
max. Systemspannung: 10000/1500 V/DC (IEC)
zulässige Umgebungstemperatur: -40°C - +85°C
Abmessungen: 1762 x 1134 x 30 mm
Gewicht: 22 kg
Lieferumfang:
2x Jinko Tiger Neo 440W Blackframe Solarmodul
4x 2m 6mm² Solarsteckverbinder-Verbindungskabel Stecker / Buchse Verlängerung
1x Offgridtec 2-fach Abzweigbuchsen Y-Verbinder inkl. Kabelverlängerung (Paar)
1x Fothermo Photovoltaischer Wasser-Boiler 80 Liter - Warmwasserbereiter
1x 5m 2x6mm² Solarsteckverbinder Verbindungskabel
€901.69*
€757.72**
Die Offgridtec 880W Solaranlage mit 80l Fothermo Boiler (MPN 4-01-014150) ist das perfekte Solar-Set für die autarke Warmwasserversorgung in Ihre...
Die Offgridtec 880W Solaranlage mit 80l Fothermo Boiler (MPN 4-01-014150) ist das perfekte Solar-Set für die autarke Warmwasserversorgung in Ihrer Garten- oder Berghütte und lässt wirklich keine Wünsche offen. Für die Installation wird kein Fachmann benötigt und die Installation eines Solarmoduls ist mit ein paar Handgriffen erledigt.
880W Solaranlage mit 80l Fothermo Boiler Komplett Set
Das Set enthält alle Komponenten, die Sie für die Warmwasserversorgung brauchen. Sie haben warmes Wasser im Waschbecken, in der Dusche oder in der Küche. Es ist kein Anschluss an das Stromnetz erforderlich.
Komponenten der Offgridtec 880W Solaranlage mit 80l Fothermo Boiler
2x Jinko Tiger Neo 440W Solarmodul
4x 2m 6mm² Solarsteckverbinder-Verbindungskabel Stecker / Buchse Verlängerung
1x Offgridtec 2-fach Abzweigbuchsen Y-Verbinder inkl. Kabelverlängerung (Paar)
1x Fothermo Photovoltaischer Wasser-Boiler 80 Liter - Warmwasserbereiter
1x 5m 2x6mm² Solarsteckverbinder Verbindungskabel
Fothermo Photovoltaischer Wasser-Boiler 80 Liter - Warmwasserbereiter
Mit dem 80L-Wasser-Boiler von Fothermo können Sie Ihr Warmwasser mit nachhaltigem und kostengünstigem Solarstrom erzeugen. Der Anschluss der Solarmodule ist mit ein paar Handgriffen in wenigen Sekunden erledigt und bietet Ihnen eine zuverlässige Warmwasserversorgung.
Technische Daten Fothermo 80l Wasser-Boiler
Volumen: 80 Liter
max. Heizleistung: 550W
max. Strom: 15,5A
Schutzklasse: IP 24
Energieeffizienzklasse: A+
Abmessungen: 470 x 480 x 900 mm
Gewicht: 25 kg
Das Jinko Tiger Neo 440W Blackframe Solarmodul
Das Jinko Tiger Neo N-Type ist ein 440W starkes Solarmodul mit monokristallinen Zellen und N-Typ-Technologie. Die Solarzellen nutzen die Super-Multi-Busbar-Technologie. Mit dieser wird der Verlust durch Microcracks effizient reduziert, der Stromübertragungsweg um 50% reduziert und die Zelleffizienz verbessert. Das Modul ist mit der Hot 2.0 Technologie gefertigt.
Technische Daten Jinko Tiger Neo 440W Solarmodul
Modulspannung (Vmp): 32,81 V
Leerlaufspannug (Voc): 39,38 V
max. Strom (Imp): 13,41 A
Kurzschlussstrom (Isc): 13,86 A
max. Systemspannung: 10000/1500 V/DC (IEC)
zulässige Umgebungstemperatur: -40°C - +85°C
Abmessungen: 1762 x 1134 x 30 mm
Gewicht: 22 kg
Lieferumfang:
2x Jinko Tiger Neo 440W Blackframe Solarmodul
4x 2m 6mm² Solarsteckverbinder-Verbindungskabel Stecker / Buchse Verlängerung
1x Offgridtec 2-fach Abzweigbuchsen Y-Verbinder inkl. Kabelverlängerung (Paar)
1x Fothermo Photovoltaischer Wasser-Boiler 80 Liter - Warmwasserbereiter
1x 5m 2x6mm² Solarsteckverbinder Verbindungskabel
The Offgridtec 440w Solaranlage with 10l Fothermo boiler (mpn 4-01-014140) is the perfect solar set for self-sufficient hot water supply in your garden or mountain hut and really leaves nothing to be desired. No specialist is required for installation and the installation of a solar module is done in a few simple steps. 440w Solaranlage with 10l Fothermo boiler complete set The set contains all the components you need for your hot water supply. You have hot water in the sink, shower or kitchen. No connection to the mains is required. Components of the Offgridtec 4400w Solaranlage with 10l Fothermo boiler 1xJinko Tiger Neo 440w 1x Fothermo Photovoltaic water boiler 10 liters - Water heater 1x 5m 2x6mm² mc4 to mc4 connection cable Fothermo Photovoltaic water boiler 10 liters - water heater With the 10 liter water heater from Fothermo you can produce your hot water with sustainable and cost-effective solar power. The solar modules can be connected in just a few seconds and provide you with a reliable hot water supply. Technical data Fothermo 10l water boiler Volume: 10 liters max. heat output: 550W max. current: 15.5A Protection class: ip X1 Energy efficiency class: A+ Dimensions: 280 x 280 x 440 mm Weight: 7.2 kg The Jinko Tiger Neo 440w Blackframe solar module The Jinko Tiger Neo N-Type is a 440w solar module with monocrystalline cells and N-type technology. The solar cells use super multi-busbar technology. This efficiently reduces the loss due to microcracks, reduces the current transmission path by 50% and improves cell efficiency. The module is manufactured using Hot 2.0 technology. Technical data Jinko Tiger Neo 440w solar module Module voltage (Vmp): 32.81 V Open circuit voltage (Voc): 39.38 V max. current (Imp): 13.41 A Short-circuit current (Isc): 13.86 A max. system voltage: 10000/1500 v/dc (IEC) permissible ambient temperature: -40°C - +85°C Dimensions: 1762 x 1134 x 30 mm Weight: 22 kg Scope of delivery: 1x Jinko Tiger Neo 440w Blackframe solar module 1x Fothermo Photovoltaic water boiler 10 liters - water heater 1x 5m 2x6mm² mc4 to mc4 connection cable
€504.60*
€424.03**
The Offgridtec 440w Solaranlage with 10l Fothermo boiler (mpn 4-01-014140) is the perfect solar set for self-sufficient hot water supply in your garde...
The Offgridtec 440w Solaranlage with 10l Fothermo boiler (mpn 4-01-014140) is the perfect solar set for self-sufficient hot water supply in your garden or mountain hut and really leaves nothing to be desired. No specialist is required for installation and the installation of a solar module is done in a few simple steps. 440w Solaranlage with 10l Fothermo boiler complete set The set contains all the components you need for your hot water supply. You have hot water in the sink, shower or kitchen. No connection to the mains is required. Components of the Offgridtec 4400w Solaranlage with 10l Fothermo boiler 1xJinko Tiger Neo 440w 1x Fothermo Photovoltaic water boiler 10 liters - Water heater 1x 5m 2x6mm² mc4 to mc4 connection cable Fothermo Photovoltaic water boiler 10 liters - water heater With the 10 liter water heater from Fothermo you can produce your hot water with sustainable and cost-effective solar power. The solar modules can be connected in just a few seconds and provide you with a reliable hot water supply. Technical data Fothermo 10l water boiler Volume: 10 liters max. heat output: 550W max. current: 15.5A Protection class: ip X1 Energy efficiency class: A+ Dimensions: 280 x 280 x 440 mm Weight: 7.2 kg The Jinko Tiger Neo 440w Blackframe solar module The Jinko Tiger Neo N-Type is a 440w solar module with monocrystalline cells and N-type technology. The solar cells use super multi-busbar technology. This efficiently reduces the loss due to microcracks, reduces the current transmission path by 50% and improves cell efficiency. The module is manufactured using Hot 2.0 technology. Technical data Jinko Tiger Neo 440w solar module Module voltage (Vmp): 32.81 V Open circuit voltage (Voc): 39.38 V max. current (Imp): 13.41 A Short-circuit current (Isc): 13.86 A max. system voltage: 10000/1500 v/dc (IEC) permissible ambient temperature: -40°C - +85°C Dimensions: 1762 x 1134 x 30 mm Weight: 22 kg Scope of delivery: 1x Jinko Tiger Neo 440w Blackframe solar module 1x Fothermo Photovoltaic water boiler 10 liters - water heater 1x 5m 2x6mm² mc4 to mc4 connection cable
Our low-priced 300W solar construction kit. This low-cost version comes without prefabricated cables and relys on simple but solid charge controller technology without displays.
The outcome is a very favourable price.
Components:
1 x Offgridtec 130W V2 solar module mono
1 x 12V 10A Steca Solsum 10.10F charge controller
1 x battery to charge controller connection cable (2x6mm²)
1 x 15m Helukabel solar cable 4mm²
1 x pair of Multi-Contact MC4-plugs (4mm²)
1 x pair of ferrules (4mm²)
This construction-kit is the basis for a 12V solar system. The charge controller's output provides 10A 12V current for your consumers. This is a very versatile set that includes everything to charge a 12V battery.
The 130W solar panel produces an annual average output of about 520Wh daily. More on sunny days, less on rainy ones. Also other factors like temerature, installation angle or climatic conditions may effect the amount of produced energy.
€174.73*
€146.83**
Our low-priced 300W solar construction kit. This low-cost version comes without prefabricated cables and relys on simple but solid charge controller t...
Our low-priced 300W solar construction kit. This low-cost version comes without prefabricated cables and relys on simple but solid charge controller technology without displays.
The outcome is a very favourable price.
Components:
1 x Offgridtec 130W V2 solar module mono
1 x 12V 10A Steca Solsum 10.10F charge controller
1 x battery to charge controller connection cable (2x6mm²)
1 x 15m Helukabel solar cable 4mm²
1 x pair of Multi-Contact MC4-plugs (4mm²)
1 x pair of ferrules (4mm²)
This construction-kit is the basis for a 12V solar system. The charge controller's output provides 10A 12V current for your consumers. This is a very versatile set that includes everything to charge a 12V battery.
The 130W solar panel produces an annual average output of about 520Wh daily. More on sunny days, less on rainy ones. Also other factors like temerature, installation angle or climatic conditions may effect the amount of produced energy.
All BIG-L systems are dimensioned for our 100W mono solar cells. The BIG-M 12V / 100W / 101Ah produces about 400Wh clean energy during summer. The included Offgridtec AGM accumulator
has a capacity of about 1280Wh. With a discharge of 50% you can use 642W each day and ensure a high battery life-span at the same time.
Energy production and storage
This system produces a daily output of about 400Wh during summer - about 50 - 90 during winter. Reference site for the measurement was Hamburg - the further you go south the more output can be expected.
On sunny days the output clearly exceeded the average.
The included Steca PR 2020 charge controller is designed for high requirements and allows the extention of the system by up to 3 x 100W modules. Therefore even in winter enough energy can be produced. With a
discharge of 50% the AGM battery can store up to 643Wh. Charge controllers out of the Steca PR series come with a LCD-display and a huge range of functions.
What can be supplied?
The system is designed to supply small 12V consumers like laptops, smart phones, 12V TVs or simply lamps. Such consumers can even be run together for several hours.
You can also add a 230V inverter to your system to even expand its functionality.
Components:
1 x Offgridtec 100w V2 Solarpanel 23V black frame
1 x Offgridtec 100Ah AGM battery
1 x 15A Steca PR 2020 charge controller with LCD-display
1 x 8m professional module connection cable (2x6mm²) - Plug & Play with Multi-Contact-connectors for a safe solar system
1 x professional battery cable (2x6mm²) with 15A-fuse
€462.91*
€389.00**
All BIG-L systems are dimensioned for our 100W mono solar cells. The BIG-M 12V / 100W / 101Ah produces about 400Wh clean energy during summer. The inc...
All BIG-L systems are dimensioned for our 100W mono solar cells. The BIG-M 12V / 100W / 101Ah produces about 400Wh clean energy during summer. The included Offgridtec AGM accumulator
has a capacity of about 1280Wh. With a discharge of 50% you can use 642W each day and ensure a high battery life-span at the same time.
Energy production and storage
This system produces a daily output of about 400Wh during summer - about 50 - 90 during winter. Reference site for the measurement was Hamburg - the further you go south the more output can be expected.
On sunny days the output clearly exceeded the average.
The included Steca PR 2020 charge controller is designed for high requirements and allows the extention of the system by up to 3 x 100W modules. Therefore even in winter enough energy can be produced. With a
discharge of 50% the AGM battery can store up to 643Wh. Charge controllers out of the Steca PR series come with a LCD-display and a huge range of functions.
What can be supplied?
The system is designed to supply small 12V consumers like laptops, smart phones, 12V TVs or simply lamps. Such consumers can even be run together for several hours.
You can also add a 230V inverter to your system to even expand its functionality.
Components:
1 x Offgridtec 100w V2 Solarpanel 23V black frame
1 x Offgridtec 100Ah AGM battery
1 x 15A Steca PR 2020 charge controller with LCD-display
1 x 8m professional module connection cable (2x6mm²) - Plug & Play with Multi-Contact-connectors for a safe solar system
1 x professional battery cable (2x6mm²) with 15A-fuse
This starter-kit includes everything to charge a battery with solar energy and to feed it into a 12V-system. The included Steca Solsum 6.6F allows the supply of 12V-consumers and provides a lot of
useful functions. with this system it is possible to realize many small solar projects at a fair price.
Besides module, charge controller and cable this set also includes everthing you need to make a proper battery and a module connection cable. We added a detailled illustrated manual to support you during the installation of your system.
The system comes with a 50W mono solar panel. If needed we can also exchange the standard charge controller with a stronger one - just let us know before ordering.
Components:
1 x Offgridtec 50W mono solar module
1 x Steca Solsum 6.6F charge controller
1 x 15m solar cable 4mm² (module connection)
1 x Mc4 connector pair 4mm²
2 x ferrules 4mm²
2 x ferrules 6mm²
2 x ring cable lugs
2 x 1,5m solar cable 6mm² (battery connection)
1 pair of battery pole clamps
€114.89*
€96.55**
This starter-kit includes everything to charge a battery with solar energy and to feed it into a 12V-system. The included Steca Solsum 6.6F allows the...
This starter-kit includes everything to charge a battery with solar energy and to feed it into a 12V-system. The included Steca Solsum 6.6F allows the supply of 12V-consumers and provides a lot of
useful functions. with this system it is possible to realize many small solar projects at a fair price.
Besides module, charge controller and cable this set also includes everthing you need to make a proper battery and a module connection cable. We added a detailled illustrated manual to support you during the installation of your system.
The system comes with a 50W mono solar panel. If needed we can also exchange the standard charge controller with a stronger one - just let us know before ordering.
Components:
1 x Offgridtec 50W mono solar module
1 x Steca Solsum 6.6F charge controller
1 x 15m solar cable 4mm² (module connection)
1 x Mc4 connector pair 4mm²
2 x ferrules 4mm²
2 x ferrules 6mm²
2 x ring cable lugs
2 x 1,5m solar cable 6mm² (battery connection)
1 pair of battery pole clamps
The BIG-M 12V / 130W / 122Ah produces about 520Wh clean energy during summer. With a battery discharge of 50% you can use 732W each day and ensure a high battery life-span at the same time.
Energy production and storage
This system produces a daily output of about 520Wh during summer - about 40 - 100 during winter. Reference site for the measurement was Hamburg - the further you
go south the more output can be expected.
On sunny days the output clearly exceeded the average.
The included Steca PR 3030 charge controller is designed for high requirements and allows the extention of the system by up to 4 x 135W modules. Therefore even in winter enough energy can be produced.
Charge controllers out of the Steca PR series come with a LCD-display and a huge range of functions.
What can be supplied?
The system is designed to supply small 12V consumers like laptops, smart phones, 12V TVs or simply lamps. Such consumers can even be run together for several hours.
You can also add a 230V inverter to your system to even expand its functionality.
Components:
1 x Offgridtec 130W V2 Mono solar panel - 018390
1 x 122Ah AGM Longex battery
1 x Steca PR 3030 charge controller with LCD-display
1 x 8m professional module connection cable (2x6mm²) - Plug & Play with Multi-Contact-connectors for a safe solar system
1 x professional battery cable (2x6mm²) with 30A-fuse
€522.41*
€439.00**
The BIG-M 12V / 130W / 122Ah produces about 520Wh clean energy during summer. With a battery discharge of 50% you can use 732W each day and ensure a h...
The BIG-M 12V / 130W / 122Ah produces about 520Wh clean energy during summer. With a battery discharge of 50% you can use 732W each day and ensure a high battery life-span at the same time.
Energy production and storage
This system produces a daily output of about 520Wh during summer - about 40 - 100 during winter. Reference site for the measurement was Hamburg - the further you
go south the more output can be expected.
On sunny days the output clearly exceeded the average.
The included Steca PR 3030 charge controller is designed for high requirements and allows the extention of the system by up to 4 x 135W modules. Therefore even in winter enough energy can be produced.
Charge controllers out of the Steca PR series come with a LCD-display and a huge range of functions.
What can be supplied?
The system is designed to supply small 12V consumers like laptops, smart phones, 12V TVs or simply lamps. Such consumers can even be run together for several hours.
You can also add a 230V inverter to your system to even expand its functionality.
Components:
1 x Offgridtec 130W V2 Mono solar panel - 018390
1 x 122Ah AGM Longex battery
1 x Steca PR 3030 charge controller with LCD-display
1 x 8m professional module connection cable (2x6mm²) - Plug & Play with Multi-Contact-connectors for a safe solar system
1 x professional battery cable (2x6mm²) with 30A-fuse
The basicPremium-XL 310W solar system 12V 24V from Offgridtec (MPN 4-01-002595), is based on two high-quality monocrystalline 155 Wp solar modules from the OLP series and the convenient PWM-12/24-45A charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable. The average daily yield in the period from March to October is about 1200 Wh*. The solar output of the system can easily be increased by several modules at a later date if your demand should increase. The system offers all the basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect basis for a wide range of possible solar applications.
High-quality basic set for a wide range of applications
Offgridtec solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, garage or in the mobile sector. We constantly focus on the high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 155W solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The Plug & Play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. With its convenient display and up-to-date charging algorithms, the PWM-12/24-45A Pro charge controller ensures that the system is easy to operate and your batteries are perfectly charged. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
Applications solar system
12V or 24V DC power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging smartphones, tablets or other devices with 12V / 5V DC power supply
Performance parameters at a glance
Average daily yield: 1200 Wh
Solar output can be extended to max. 450 Wp (at 24V = 1050 Wp) if the same panel is used
Available power outputs: 5V DC and 12V DC at the charge controller (230V only with optional voltage converter)
Components of the basicPremium-XL 310W solar system 12V 24V
2 x Offgridtec OLP 155W Solar Panel 12V PERC
Rated power: 155W, Module voltage: 21,8V, Max. System voltage: 1000V/DC
Max. Current: 7.11A, Short circuit current: 7.54A, Open circuit voltage: 25.7V
Weight: 9.37kg, Dimensions: 1310x650x35mm
Cell efficiency: >23%, Cell type: Monocrystalline PERC
1 x PWM-12/24-45 Pro solar controller 12V/24V
max. charging current 45 A, max. PV power with 12V / 24V system: 590 W / 1180 W
modern, 3-stage PWM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: AGM, GEL, and liquid lead acid
Intuitive operation via 2 buttons directly on the unit
Large LCD display with numerous display options, including kWh meter
2 USB ports with a maximum output of 2.4A
Load output with numerous configuration options, e.g. for light control
Temperature-compensated battery charging (optional temperature sensor required)
1x 8m 2x6mm² solar connection cable controller/solar module
TWIN cable, plug & play - ready for immediate use
Solar connectors on the solar module side, wire end sleeves on the charge controller side
High-quality solar cable: TWIN cable
Wire cross-section: 2x6mm², length: 8m
1x 1.5m 10mm² battery cable with MIDI fuse holder
Plug & Play - immediately ready for use
wire cross-section: 10mm², length: 1.5m
MIDI fuse holder included
Screw terminal connection on charge controller side, M8 ring terminals on battery side
1x Solar-Y connector (Offgridtec, 000-000-002)
1x Battery pole terminal set
1x MIDI fuse 50A 58V
Flexible and very easy to install
The system is very easy to install, even for people who have little experience with solar technology. The cables are all supplied plug & play, i.e. ready for connection. You only need to connect the components and the electricity production can begin.
Expandable, customisable
Like every Offgridtec system, the basicPremium-S can be individually adapted and modified to your requirements. Our technical sales team looks forward to your enquiry. Please contact customer service for any costs that may be incurred.
Scope of delivery:
1x Offgridtec 3-01-011075 basicPremium-XL 310W 12V 24V solar system1x instruction manualincluding all components listed above
€439.11*
€369.00**
The basicPremium-XL 310W solar system 12V 24V from Offgridtec (MPN 4-01-002595), is based on two high-quality monocrystalline 155 Wp solar modules fro...
The basicPremium-XL 310W solar system 12V 24V from Offgridtec (MPN 4-01-002595), is based on two high-quality monocrystalline 155 Wp solar modules from the OLP series and the convenient PWM-12/24-45A charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable. The average daily yield in the period from March to October is about 1200 Wh*. The solar output of the system can easily be increased by several modules at a later date if your demand should increase. The system offers all the basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect basis for a wide range of possible solar applications.
High-quality basic set for a wide range of applications
Offgridtec solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, garage or in the mobile sector. We constantly focus on the high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 155W solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The Plug & Play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. With its convenient display and up-to-date charging algorithms, the PWM-12/24-45A Pro charge controller ensures that the system is easy to operate and your batteries are perfectly charged. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
Applications solar system
12V or 24V DC power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging smartphones, tablets or other devices with 12V / 5V DC power supply
Performance parameters at a glance
Average daily yield: 1200 Wh
Solar output can be extended to max. 450 Wp (at 24V = 1050 Wp) if the same panel is used
Available power outputs: 5V DC and 12V DC at the charge controller (230V only with optional voltage converter)
Components of the basicPremium-XL 310W solar system 12V 24V
2 x Offgridtec OLP 155W Solar Panel 12V PERC
Rated power: 155W, Module voltage: 21,8V, Max. System voltage: 1000V/DC
Max. Current: 7.11A, Short circuit current: 7.54A, Open circuit voltage: 25.7V
Weight: 9.37kg, Dimensions: 1310x650x35mm
Cell efficiency: >23%, Cell type: Monocrystalline PERC
1 x PWM-12/24-45 Pro solar controller 12V/24V
max. charging current 45 A, max. PV power with 12V / 24V system: 590 W / 1180 W
modern, 3-stage PWM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: AGM, GEL, and liquid lead acid
Intuitive operation via 2 buttons directly on the unit
Large LCD display with numerous display options, including kWh meter
2 USB ports with a maximum output of 2.4A
Load output with numerous configuration options, e.g. for light control
Temperature-compensated battery charging (optional temperature sensor required)
1x 8m 2x6mm² solar connection cable controller/solar module
TWIN cable, plug & play - ready for immediate use
Solar connectors on the solar module side, wire end sleeves on the charge controller side
High-quality solar cable: TWIN cable
Wire cross-section: 2x6mm², length: 8m
1x 1.5m 10mm² battery cable with MIDI fuse holder
Plug & Play - immediately ready for use
wire cross-section: 10mm², length: 1.5m
MIDI fuse holder included
Screw terminal connection on charge controller side, M8 ring terminals on battery side
1x Solar-Y connector (Offgridtec, 000-000-002)
1x Battery pole terminal set
1x MIDI fuse 50A 58V
Flexible and very easy to install
The system is very easy to install, even for people who have little experience with solar technology. The cables are all supplied plug & play, i.e. ready for connection. You only need to connect the components and the electricity production can begin.
Expandable, customisable
Like every Offgridtec system, the basicPremium-S can be individually adapted and modified to your requirements. Our technical sales team looks forward to your enquiry. Please contact customer service for any costs that may be incurred.
Scope of delivery:
1x Offgridtec 3-01-011075 basicPremium-XL 310W 12V 24V solar system1x instruction manualincluding all components listed above
Powerful all-in-one solar complete system The Autark S-Master is the smallest complete system of the Autark family and delivers an average daily yield of 520 watt hours between March and October. The generated power is stored in the cycle resistant 101ah agm battery - the high quality charge controller with integrated display gives you information about the charge status of the battery while your 230v consumers can be operated up to the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a whole range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a continuous output of 3000w Features of the Autark S-Master If necessary, module-side expandable by 1 x 130w with little installation effort Average daily yield between March and October: approx. 520Wh (approx. 45Ah) Plug & Play System ready for connection - plug together and go Enables operation of 12v and 230v consumers, as well as 5v usb consumers usb charging possibility directly at the charge controller (5vDC/1) Easy to read lcd display informs about all operating parameters Flexible installation possibility thanks to 8m connection cable from module to controller Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage cut-off, short-circuit protection, reverse polarity, etc. Charge controller enables temperature-compensated charging - temperature sensor included Configurable 24v load output on the charge controller Areas of application This complete system can be used in a variety of ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and charging of cell phone and laptop succeeds easily with this system. Also the installation on the motorhome is conceivable - we also carry appropriate brackets and adhesive sets for mounting on such. Extensive connection options 12v consumer output with 20a power directly on the charge controller 2 x usb charging port on the charge controller with max. 2.4a (total) 1 x usb charging port on the voltage converter with max. 1a power Parts list - what's inside 1 x 135w V2 monocrystalline solar panel from Offgridtec -018390. 1 x 20a pwm charge controller with clear lcd display and usb charging capability - the unit also has a 20a load output and is easy to use - all important parameters can be read on the display 1 x 101ah agm battery with m8 screw terminal Dimensions: 330 x 172 x 215mm(+5mm terminal) - the battery is absolutely maintenance free and leak proof and lasts up to 10 years depending on usage 1 x 3000w 24v to 230v sine wave voltage converter incl. 1 x 8m 6mm² professional connection cable solar module to charge controller with original Stäubli mc4 connectors and high quality Lapp Ölflex 2x6mm² solar cable 1 x 1.5m professional battery connection cable with 25a flat fuse and m8 ring terminals for the connection between charge controller and battery 1 x temperature sensor with 3m length for the connection of the controller to the battery fuse holder + 80a mega fuse for installation between voltage converter and battery positive pole to protect against short circuitRoof mount for the solar module Since there are different requirements for the mount for a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here: Solar module holder for flat roof or wall mounting Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne and similar.) Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure Mounting kit for pitched roof mounting on beavertail tiles Scope of delivery: 1x Solaranlage Autark S-Master with 130w V2 solar module, 20a pwm charge controller with lcd display and usb ports, 3000w sine wave voltage converter, 101ah agm battery, operating instructions
€571.08*
€479.90**
Powerful all-in-one solar complete system The Autark S-Master is the smallest complete system of the Autark family and delivers an average daily yield...
Powerful all-in-one solar complete system The Autark S-Master is the smallest complete system of the Autark family and delivers an average daily yield of 520 watt hours between March and October. The generated power is stored in the cycle resistant 101ah agm battery - the high quality charge controller with integrated display gives you information about the charge status of the battery while your 230v consumers can be operated up to the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a whole range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a continuous output of 3000w Features of the Autark S-Master If necessary, module-side expandable by 1 x 130w with little installation effort Average daily yield between March and October: approx. 520Wh (approx. 45Ah) Plug & Play System ready for connection - plug together and go Enables operation of 12v and 230v consumers, as well as 5v usb consumers usb charging possibility directly at the charge controller (5vDC/1) Easy to read lcd display informs about all operating parameters Flexible installation possibility thanks to 8m connection cable from module to controller Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage cut-off, short-circuit protection, reverse polarity, etc. Charge controller enables temperature-compensated charging - temperature sensor included Configurable 24v load output on the charge controller Areas of application This complete system can be used in a variety of ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and charging of cell phone and laptop succeeds easily with this system. Also the installation on the motorhome is conceivable - we also carry appropriate brackets and adhesive sets for mounting on such. Extensive connection options 12v consumer output with 20a power directly on the charge controller 2 x usb charging port on the charge controller with max. 2.4a (total) 1 x usb charging port on the voltage converter with max. 1a power Parts list - what's inside 1 x 135w V2 monocrystalline solar panel from Offgridtec -018390. 1 x 20a pwm charge controller with clear lcd display and usb charging capability - the unit also has a 20a load output and is easy to use - all important parameters can be read on the display 1 x 101ah agm battery with m8 screw terminal Dimensions: 330 x 172 x 215mm(+5mm terminal) - the battery is absolutely maintenance free and leak proof and lasts up to 10 years depending on usage 1 x 3000w 24v to 230v sine wave voltage converter incl. 1 x 8m 6mm² professional connection cable solar module to charge controller with original Stäubli mc4 connectors and high quality Lapp Ölflex 2x6mm² solar cable 1 x 1.5m professional battery connection cable with 25a flat fuse and m8 ring terminals for the connection between charge controller and battery 1 x temperature sensor with 3m length for the connection of the controller to the battery fuse holder + 80a mega fuse for installation between voltage converter and battery positive pole to protect against short circuitRoof mount for the solar module Since there are different requirements for the mount for a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here: Solar module holder for flat roof or wall mounting Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne and similar.) Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure Mounting kit for pitched roof mounting on beavertail tiles Scope of delivery: 1x Solaranlage Autark S-Master with 130w V2 solar module, 20a pwm charge controller with lcd display and usb ports, 3000w sine wave voltage converter, 101ah agm battery, operating instructions
The basicPremium-XL 600W solar system 12V 24V from Offgridtec (MPN 4-01-002605), is based on four high-quality, monocrystalline 150 Wp V2 solar modules of the OLP series and the convenient PWM-12/24-45A charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable. The average daily yield in the period from March to October is about 2400 Wh*. The system offers all the basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect basis for a wide range of possible solar applications.
High-quality basic set for a wide range of applications
Offgridtec solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, the garage or in a mobile area. We constantly focus on the high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 150W V2 solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The Plug & Play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. With its convenient display and up-to-date charging algorithms, the PWM-12/24-45A Pro charge controller ensures that the system is easy to operate and your batteries are perfectly charged. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
Applications solar system
12V or 24V DC power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging smartphones, tablets or other devices with 12V / 5V DC power supply
Performance parameters at a glance
Average daily yield: 2400 Wh
Solar output can be extended to max. 750 Wp (at 24V = 1050 Wp) if the same panel is used.
Available current outputs: 5V DC and 12V DC at the charge controller (230V only with optional voltage converter)
Components of the basicPremium-XL 620W solar system 12V 24V
4 x Offgridtec OLP 150W Solar Panel V2 PERC
Rated power: 150W, Part number 3-01-018480
Module voltage: 19,4V, Max. System voltage: 1000V/DC
Max. Current: 7.74A, Short circuit current: 8,20A, Open circuit voltage: 22,90V
Weight: 9.8kg, Dimensions: 670 x 1195 x 35mm
Cell efficiency: >22%, Cell type: Monocrystalline PERC
1 x PWM-12/24-45 Pro solar controller 12V/24V
max. charging current 45 A, max. PV power with 12V / 24V system: 590 W / 1180 W
modern, 3-stage PWM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: AGM, GEL, and liquid lead acid
Intuitive operation via 2 buttons directly on the unit
Large LCD display with numerous display options, including kWh meter
2 USB ports with a maximum output of 2.4A
Load output with numerous configuration options, e.g. for light control
Temperature-compensated battery charging (optional temperature sensor required)
1x 10m 2x10mm² solar connection cable controller/solar module
TWIN cable, Plug & Play - ready for immediate useSolar connector on the solar module side, wire end sleeves on the charge controller side
High-quality solar cable: TWIN cable
Wire cross-section: 2x10mm², length: 10m
1x 1.5 2x10mm² 50A battery connection cable controller/battery
Plug & Play - ready for immediate usewire cross-section: 10mm², length: 1.5m
MIDI fuse holder included
Screw terminal connection on charge controller side, M8 ring terminals on
battery side
6x 50cm solar plug connection cable 6mm²
3x Solar-Y connectors (Offgridtec, 000-000-002)
1x battery pole terminal set
1x MIDI fuse 50A 58V
Flexible and very easy to install
The system is very easy to install, even for people who have little experience with solar technology. The cables are all supplied plug & play, i.e. ready for connection. You only need to connect the components and the electricity production can begin.
Expandable, customisable
Like every Offgridtec system, the basicPremium-S can be individually adapted and modified to your requirements. Our technical sales team looks forward to your enquiry. Please contact customer service for any costs that may be incurred.
Scope of delivery:
1x Offgridtec 4-01-002605 basicPremium-XL 620W 12V 24V solar system
1x instruction manual
including all components listed above
€761.48*
€639.90**
The basicPremium-XL 600W solar system 12V 24V from Offgridtec (MPN 4-01-002605), is based on four high-quality, monocrystalline 150 Wp V2 solar module...
The basicPremium-XL 600W solar system 12V 24V from Offgridtec (MPN 4-01-002605), is based on four high-quality, monocrystalline 150 Wp V2 solar modules of the OLP series and the convenient PWM-12/24-45A charge controller with LCD display. The basicPremium series also comes with a matching 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable. The average daily yield in the period from March to October is about 2400 Wh*. The system offers all the basic components needed to charge your battery with self-produced solar power. This combination makes it the perfect basis for a wide range of possible solar applications.
High-quality basic set for a wide range of applications
Offgridtec solar sets of the basicPremium series consist of basic components that every self-sufficient solar power system needs, regardless of whether the system is to be used on a garden shed, the garage or in a mobile area. We constantly focus on the high quality of all delivered components to ensure reliability and a long life expectancy of the system. Our 150W V2 solar module is equipped with the best monocrystalline cells and is produced and tested using the latest manufacturing technology. The remaining components of the set also follow this quality standard: The Plug & Play connection cables "made in Germany" are designed to keep the installation effort as low as possible without compromising on the connection quality. With its convenient display and up-to-date charging algorithms, the PWM-12/24-45A Pro charge controller ensures that the system is easy to operate and your batteries are perfectly charged. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide range of applications.
Applications solar system
12V or 24V DC power supply in garden sheds, allotments and similar objects
self-sufficient systems for outdoor lighting applications
self-sufficient monitoring and communication systems or weather stations
charging smartphones, tablets or other devices with 12V / 5V DC power supply
Performance parameters at a glance
Average daily yield: 2400 Wh
Solar output can be extended to max. 750 Wp (at 24V = 1050 Wp) if the same panel is used.
Available current outputs: 5V DC and 12V DC at the charge controller (230V only with optional voltage converter)
Components of the basicPremium-XL 620W solar system 12V 24V
4 x Offgridtec OLP 150W Solar Panel V2 PERC
Rated power: 150W, Part number 3-01-018480
Module voltage: 19,4V, Max. System voltage: 1000V/DC
Max. Current: 7.74A, Short circuit current: 8,20A, Open circuit voltage: 22,90V
Weight: 9.8kg, Dimensions: 670 x 1195 x 35mm
Cell efficiency: >22%, Cell type: Monocrystalline PERC
1 x PWM-12/24-45 Pro solar controller 12V/24V
max. charging current 45 A, max. PV power with 12V / 24V system: 590 W / 1180 W
modern, 3-stage PWM charge control for gentle and efficient charging of your battery(ies)
3 battery types adjustable: AGM, GEL, and liquid lead acid
Intuitive operation via 2 buttons directly on the unit
Large LCD display with numerous display options, including kWh meter
2 USB ports with a maximum output of 2.4A
Load output with numerous configuration options, e.g. for light control
Temperature-compensated battery charging (optional temperature sensor required)
1x 10m 2x10mm² solar connection cable controller/solar module
TWIN cable, Plug & Play - ready for immediate useSolar connector on the solar module side, wire end sleeves on the charge controller side
High-quality solar cable: TWIN cable
Wire cross-section: 2x10mm², length: 10m
1x 1.5 2x10mm² 50A battery connection cable controller/battery
Plug & Play - ready for immediate usewire cross-section: 10mm², length: 1.5m
MIDI fuse holder included
Screw terminal connection on charge controller side, M8 ring terminals on
battery side
6x 50cm solar plug connection cable 6mm²
3x Solar-Y connectors (Offgridtec, 000-000-002)
1x battery pole terminal set
1x MIDI fuse 50A 58V
Flexible and very easy to install
The system is very easy to install, even for people who have little experience with solar technology. The cables are all supplied plug & play, i.e. ready for connection. You only need to connect the components and the electricity production can begin.
Expandable, customisable
Like every Offgridtec system, the basicPremium-S can be individually adapted and modified to your requirements. Our technical sales team looks forward to your enquiry. Please contact customer service for any costs that may be incurred.
Scope of delivery:
1x Offgridtec 4-01-002605 basicPremium-XL 620W 12V 24V solar system
1x instruction manual
including all components listed above
All BIG-M systems are dimensioned for our 80W mono solar cells. The BIG-M 12V / 50W / 50Ah produces about 200Wh clean energy during summer. On sunny days in summer the system can even produce up to 400Wh and more.
The included AGM battery stores about 600Wh. With a discharge of 50% you can use about 300Wh daily and ensure a higher battery life-span of 5 to 10 years at the same time.
All components and cables are perfectly matched together - there is nothing you have to care about.
If this set is not exactly what meets your requirements please let us know. We gladly provide you with an individual offer with other specifications according to your needs.
Components:1 x Offgridtec 50W Mono solar panel1 x Offgridtec 51Ah AGM battery1 x Steca PR 1010 charge controller with LCD-display1 x 8m professional module to charge controller connection cable (2x6mm²)1 x 1,5m professional battery cable with 10A-fuse
€282.01*
€236.98**
All BIG-M systems are dimensioned for our 80W mono solar cells. The BIG-M 12V / 50W / 50Ah produces about 200Wh clean energy during summer. On sunny d...
All BIG-M systems are dimensioned for our 80W mono solar cells. The BIG-M 12V / 50W / 50Ah produces about 200Wh clean energy during summer. On sunny days in summer the system can even produce up to 400Wh and more.
The included AGM battery stores about 600Wh. With a discharge of 50% you can use about 300Wh daily and ensure a higher battery life-span of 5 to 10 years at the same time.
All components and cables are perfectly matched together - there is nothing you have to care about.
If this set is not exactly what meets your requirements please let us know. We gladly provide you with an individual offer with other specifications according to your needs.
Components:1 x Offgridtec 50W Mono solar panel1 x Offgridtec 51Ah AGM battery1 x Steca PR 1010 charge controller with LCD-display1 x 8m professional module to charge controller connection cable (2x6mm²)1 x 1,5m professional battery cable with 10A-fuse