The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands placed on a solar accumulator today. Maximum safety and a long service life are guaranteed even with regular deep discharge thanks to the latest technology. The latest battery of the market-leading manufacturer with now 3.5 kWh per module has again a battery management system (bms) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters. Features Extremely cycle resistant - over 6000 cycles at 95% DoD More usable energy content than the previous model US3000 Lifetime over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging power possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharge overvoltage during charging excessive currents during charging and discharging over and under temperature Short circuit and reverse polarity Constant monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS. High cycle life The extremely high cycle life of the installed LiFePo4 cells make Pylontech us3000c modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-connected or stand-alone, the Pylontech storage system offers several advantages over typical lead-acid batteries and other lithium technologies. Technical data Battery Type: Lithium Iron Phosphate (LiFePo4) Rated voltage: 48V Rated capacity: 3552 Wh Usable capacity (95% DoD): 3374 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 90A Max. (Discharge) charging current: 74A Recommended charge/discharge current: 37A Communication: rs485, CAN Weight: 32 kg Dimensions: 442 x 420 x 132 mm Protection class: IP20 Temperature range charge: 0°C - +50°C Temperature range discharge: -10°C - +50°C Temperature range storage: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 years manufacturer warranty Certification: TÜV, ce, UN38.8 Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1x Pylontech us3000c LiFePO4 3.5 kWh 1x cable set parallel connection incl. grounding 1x rj45 data cable 1x mounting screws 1x user manual
From
€1,013.31*
From €851.52**
The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands...
The Pytes e-box 48100r-c (mpn 110402100007) is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, sophisticated design and impressive performance. The battery is compact, easy to install, maintenance-free and can be used as the basic building block of an energy storage system by connecting it in parallel. Applications range from self-consumption coverage in private homes to small commercial and industrial energy storage systems, as well as in telecommunication stations.The Pytes E-BoxLatest generation LFP storageOver 6000 cycles at 90% DoDIntelligent energy managementIdeal for emergency power supplyExtensive compatibilityModularly expandableCAN and rs485 communicationIntelligent energy managementThe intelligent Pytes battery offers a comprehensive energy management system. Through real-time measurements, monitoring and management, it optimizes the system service life using intelligent algorithms. The battery thus ensures efficient and sustainable use of the available energy.Reliable emergency power supplyThe simple installation and user-friendly design make Pytes batteries a practical option for ensuring an uninterrupted power supply in your home. With their intelligent control features, Pytes batteries can optimize energy consumption and maximize battery life to ensure your backup power supply is efficient and reliable.Long service life and maximum safetyPytes batteries are characterized by their impressive service life and high level of safety. With over 6000 cycles at 90% depth of discharge (dod), they offer an exceptionally long service life. Whether it is a grid-connected solar system or a self-sufficient stand-alone system, the Pytes storage system offers several clear advantages over conventional lead batteries and other lithium technologies.Technical dataBattery chemistry: Lithium iron phosphate (LFP)Nominal voltage: 51.2 VVoltage range: 47.5-57.6 VNominal power: 100 AhNominal energy: 5.12 kWhMax. Charging current: 50 AMax. Discharge: 50 ACharging temperature: 0~50°CDischarging temperature: -10~50°CEfficiency: =95%Communication protocol: rs-232, rs-485, CANCycle life: >6000 cycles at 90% DoDDimensions: 440 x 620 x 117 mmWeight: 51 kgScope of delivery:1x Pytes E-Box 48100r-c
€1,307.81*
€1,099.00**
The Pytes e-box 48100r-c (mpn 110402100007) is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, s...
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A variety of different board battery types can be charged via the primary charging output (BATT-1). The battery spectrum ranges from AGM, GEL and liquid lead acid to state-of-the-art LiFePO4 and Li-NiCoMn battery systems. The secondary battery charge output (BATT-2) is designed for a starter battery that is at the same voltage level as BATT-1. The unit automatically detects the system voltage of the starter battery (BATT-2) and charging of the BATT-2 begins as soon as the preset conditions are met.
The controller uses the advanced MPPT control algorithm that minimises the maximum power point loss rate and loss time, quickly tracks the maximum power point (MPP) of the PV generator, and processes the maximum energy from the PV generator under all conditions. Energy utilisation in a PV system with MPPT controller is increased by 20 to 30% compared to the PWM charging method.
Features Highlights of the MPPT Pro DUO 30 A
Max Power-Point Tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%.
Advanced MPPT control algorithm to minimise MPP loss rate and minimise time loss.
Higher range of MPP operating voltage to improve PV module utilisation.
Possibility of limiting the charging power by user or automatic charging current (BATT-1).
Digital circuit control of adaptive three-stage charging mode to improve BATT-1 lifetime.
The product will enter power saving mode if no manual input has been made for a long time and charging conditions are not met (PV<5v).>
100% charge and discharge in the operating temperature range.
AES control signal for auto-refrigerator to avoid energy waste.
Standard Modbus protocol and RS485 communication port (5V/200mA).
Overview of the most important technical features
Maximum charging current: 30A at a battery voltage of 12V or 24V.
Optional remote display with mounting frame available.
Supports all major battery types.
Active temperature equalisation for optimal charging and ensuring long battery life.
Max. Solar power 390W at 12V system voltage and 780W at 24V system voltage.
100V max. PV input voltage
Grounding: Negative
Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH)
Connection terminals Battery 1: 16mm² (AWG6) / Battery 2: 4mm² (AWG12)
Weight: 1,4KG
Diameter of mounting holes: 5mm
Energy consumption: 26mA at 12V / 15mA at 24V
Max. Efficiency: 98
Intelligent energy saver
If there is no manual operation for an extended period of time and charging conditions are not present, the MPPT-Pro Duo will switch to energy saving mode, reducing the unit's energy consumption to a minimum. This behaviour also reduces wear and tear on the unit, which is reflected in a significantly longer service life. The system parameters are displayed and set directly via the intuitive control panel on the controller or via the MT11 remote control (accessory).
System communication and protection functions
The refrigerator's AES control signal is built into the controller, which delivers excess solar power to the refrigerator to prevent energy waste. The protection class of the MPPT Duo is IP33. It resists splashing water and is dust-tight. Our MPPT Pro DUO has multiple protection functions, including battery overcharge protection, discharge protection and reverse polarity protection of PV and battery, which effectively ensure the safety, stability and service life of the solar system.
Scope of delivery:
1x Offgridtec 1-01-011200 MPPT DUO charge controller.
1x instruction manual
€111.84*
€93.98**
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A vari...
The Multiplus-II 48/3000/35-32 gx is a high-end device combination from victron Energy (mpn pmp482306000) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 50 a and the potential range of use to ess applications. The inverter module delivers a whopping 3000 w at non-linear load, or 2400 w at linear continuous load. the 48 v battery charger is also very well proportioned, with 35 a charging power, and is complemented by a 32 a transfer switch that allows lightning-fast switching between aC connections. Compared to the rest of the series, the gx variants have an integrated gx display with numerous other connection options. important features of the Multiplus-II 48/3000/35-32 gx integrated gx control unit with various communication ports PowerControl and Powerassist -increase of mains or generator performance built-in anti-islanding function and connection for external current sensor (optional) can be used as a backup device in grid-connected systems for power supply in case of grid failures can be used in various ess (Energy Storage System) applications best suited for professional seafaring, yachts, vehicles and land-based, off-grid applications vE.Bus interface for parallel and three-phase operation, remote monitoring and system integration virtually unlimited power through parallel and three-phase operation can be configured on-site or remotely using vEConfigure software* technical features 3000w power at non-linear load 2400 w continuous load and 6000 w peak power for 48 v battery voltage, 32 a transfer switch and 35 a battery charger output voltage: 230 vaC, frequency: 50 Hz max. efficiency is 95%, protection class IP22 always enough power thanks to PowerControl and Powerassist a maximum mains or generator current can be set on the Multiplus-II 48/3000/35-32 gx. The MultiPlus-II then takes into account other connected AC consumers and only uses the current that is "left over" to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The Powerassist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus-II immediately compensates for insufficient generator, shore power or mains power with energy from the battery. if the load is reduced, i.e. if consumers are switched off, the energy that is then available again in sufficient quantities can be used to charge the batteries Solar power: alternating current even in the event of a power failure The device can be used with both non-grid-connected and grid-connected pv systems, as well as with other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters. maximum flexibility thanks to two AC outputs The main output ensures uninterrupted operation. In the event of a grid failure or interruption of the shore/generator power, the MultiPlus-II takes over the supply of the connected consumers. Switching occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic equipment is guaranteed. The second output supplies power only when AC power is available at the input of the MultiPlus-II. consumers that must not discharge the battery, such as a water heater, can be connected to this output. Scope of the integrated gx device A vE.Can interface This can be used to connect vE.Can devices from victron (e.g. vE.Can mppt). The port can also be reconfigured via the remote console for use with a compatible CaN bus Li-Ion battery. 1xUSB connection 1x Ethernet port 1x vE.Direct connection many possibilities for system expansion Settings can be changed within minutes using the vEConfigure software (requires a computer or laptop and MK3 USB interface).multiple monitoring and control options are available: Color Control gx, venus gx, Octo gx, CaNvu gx, laptop, computer, Bluetooth (with the optional vE.Bus Smart Dongle), battery monitor, Digital Multi control panel Remote configuration and monitoring Install a Color Control gx or other gx products to connect to the Internet. Operating data can be stored and viewed free of charge on our vRM (victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed. Scope of delivery: 1x victron pmp482306000 Multiplus-II 48/3000/35-32 gx 230 v 1x instruction manual
€800.10*
€672.35**
The Multiplus-II 48/3000/35-32 gx is a high-end device combination from victron Energy (mpn pmp482306000) that combines classic Multiplus components w...
The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal for 12v systems thanks to its 20v operating voltage. In Offgridtec mono solar modules only cells of the highest quality grade are installed and guarantee a constant high quality and performance with maximum service life thanks to state-of-the-art manufacturing. Features of Offgridtec 150w 12v mono solar panel proven quality directly from Offgridtec manufactured according to the latest standards monocrystalline solar cells extremely resistant ESG glass makes the module usable even in the most adverse environmental conditions ideal for 12v systems on land or in mobile solar systems 2 bypass diodes - minimized power loss in shaded conditions The mono 150w 12v is one of over 40 proven solar panels from the Offgridtec portfolio and participates in Offgridtecs experience in manufacturing high quality 12v and 24v solar cells. The module can be used in very adverse operating conditions thanks to the extremely resistant solar glass. It can withstand heavy hail and storms or extreme cold and heat without any problems and thanks to the integrated bypass diodes, the module can continue to produce power even in shaded or low light conditions. The most important technical data at a glance Power (Pmax): 150w Working voltage (Vmp): 20 V Open circuit voltage (Voc): 24 V max. current (Imp): 7.5 A Short circuit current (Isc): 8.1 A max. system voltage: 1000 V permissible ambient temperature: -40°C - +85°C Dimensions: 1140 x 680 x 35 mm Weight: 12 kg Universally applicable Offgridtecs 150w 12v Mono is universally applicable for example in 12 Volt Solaranlagen on garden houses, allotments or for the power supply of lighting applications, self-sufficient systems of signal and surveillance technology and many more. But also in mobile systems such as in mobile home solar systems this panel makes a good figure. The connection cables are 80 cm long and equipped with MC4 connectors. Scope of delivery: Offgridtec 3-01-001255 150w mono 12v solar panel
€130.78*
€109.90**
The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal f...
The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in the range. It has a 3-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged.
Performance that sets standards
The fsp-2 195w Ultra is equipped with American SPR back-contact cells from SunPower. The look of the cells is completely black, which also gives the fsp-2 195w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and set new standards in this power class in combination with the low weight and compact dimensions of the fsp-2 panel.
extensive application possibilities:
excellent usable in the camping area
or for expeditions, climbing tours and much more...
for vehicles and boats without fixed solar installation ...
and numerous other applications in different areas...
technical highlights fsp-2 195w ultra foldable solar panel
Rated power: 195wp
Number of sides: 3 x 65 Wp
Module voltage (Vmp): 33,5 V
Max. Charge current (Imp): 5,82 A
Open circuit voltage (Voc): 39,4 V
Short circuit current (Isc): 6,17 A
Dimensions closed: 820 x 440 x 40 mm
Dimensions open designed: 820 x 1545 x 60 mm
Weight: 7,12 Kg
ETFE coating
SunPower high performance cells
6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side
0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller)
1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side
Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse
the included Profi-Connection Kit
The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller.
For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse.
customizable on request
All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred.
about the fsp-2 series
As with all Offgridtec solar module series, high quality has been emphasized in the fsp-2 series. The fsp-2 195w works with highly effective solar cells. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is coated with ETFE coating, which provides better protection and at the same time ensures very high light transmittance. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions.
Scope of delivery
1x Offgridtec fsp-2 195w 12v, 3-01-012680
1x Offgridtec fsp-2 Connection-Kit
€403.23*
€338.85**
The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in...
Besides a 290ml cartridge this handy Dekalin adhesive-set also includes the Dekalin Dekavator, DEKACLEAN cloths and a sheet of very fine sandpaper for an ideal preparation of the surface.
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various components.Thanks to it's adhesive power the use of clamps is mostly unnecassary. The Dekasyl MS-5 also serves as sealent between similar materials or when mechanical connections are used.
Application:
Elastic connections and sealing for trains, caravans, trucks, cars,...
Glueing windows of buses, trains, caravans,...
Glueing of edge profiles (aluminium or polyester) of trailers
Glueing of polyester components with metal frame
Characteristics:
Free of solvents, isocyanate and PVC
Very UV- and age-resistant
Very high initial strength. Very high adhesion in general even without priming on various surfaces.
Constantly elastic within a temperature range of -40°C to +120°
Neutral, odorless and quick-setting
After skim-development paintable - normally this does not influence the setting-process
Compatible with most industrial painting systems, alkyd resin paint as well as dispersion paint (because of the many different types of industrial paints a material compatibility test is recommended)
We recommend to mount our spoilers and cable entries only with Dekasyl adhesive together with DEKAvator as this connection had the best outcome in a laboratory test.
Why Dekasyl?
Manufacturers of caravans like Fendt, Dethleffs, Burstner, Carthago, Pilote and Hymer use Dekalin-products in many different areas, for example as sealent for roofs, side panels, undercoating, glueing of PMMA-windows, sound-proofing, engine-covering, and many more.As a global partner of the caravan and camping industry Dekalin provides you with a wide range of latest technology and supports sellers in realizing their demands. They offer special solutions for sealing, glueing, damming and repairing.
Details:Glue color: blackDelivery scope: 1x cartridge 290ml Dekalin 6252412 Dekasyl MS-5 adhesive black, 1x sheet of sandpaper, 1x Dekalin Dekavator 6257812 bottle 30ml, DEKACLEAN cleaning cloths
Besides a 290ml cartridge this handy Dekalin adhesive-set also includes the Dekalin Dekavator, DEKACLEAN cloths and a sheet of very fine sandpaper for...
Dieses Set enthält alles was Sie brauchen um Module mit je max. 1m Breite auf einem Ziegeldach zu befestigen. Die enthaltenen Dach-Haken sind spezielle für Ziegeldächer konstruiert. Durch hochwertigste korrosionsfreie Materialien aus Edelstahl und Aluminium ist eine sichere und langlebige Montage gewährleistet.
Die Stücklisten der Befestigungskits sind für eine Montage der Module direkt nebeneinander konzipiert. Sollten Sie z.B. zwei Reihen untereinander mit je drei Solarmodulen planen benötigen Sie zwei Kits für je drei Module.
Beinhaltet:
Dachhaken 3-fach verstellbar (Edelstahl)
Solar-Profilschienen (Aluminium)
Endklemmen (Aluminium)
Nutensteine (Aluminium)
Endkappen
Alle notwendigen Schrauben und Muttern
Hinweis:
Nur für gerahmte Module mit 30mm/35mm Rahmenstärke
Module sind nicht im Lieferumfang enthalten
Variants from €106.95*
€255.45*
€214.66**
Dieses Set enthält alles was Sie brauchen um Module mit je max. 1m Breite auf einem Ziegeldach zu befestigen. Die enthaltenen Dach-Haken sind spe...
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and October. The generated power is stored in the cycle-proof 122Ah agm battery - the high-quality charge controller with integrated display gives you information about the charge status of the battery while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 1000w (15min)
Features of the Autark M-Master
If required, module side expandable by 2 x 100w with low installation effort
Average daily yield between March and October: approx. 800wh (approx. 66Ah)
Plug & Play ready-to-connect system - plug together and go
Allows operation of 12v and 230v loads, as well as 5v usb consumers
usb charging possibility directly at the charge controller (max. 2,4A)
Easy to read lcd display informs about all operating parameters
Flexible mounting possibility thanks to 8m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb included)
Charge controller enables temperature compensated charging - temperature sensor included in delivery
Configurable 12v load output at the charge controller for loads up to max. 30a - suitable e.g. for lighting control
Application areas
This complete system can be used in many ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. The installation on the motor home is also conceivable - we also have the corresponding brackets and adhesive sets for the attachment.
Extensive connection options
230v ac 50hz 1000w (15min - 1000w / permanent - 800w / short time (starting currents) - 1600w) Schuko socket on the sine wave voltage converter
12v consumer output with 30a power directly at the charge controller
2 x usb charging port at the charge controller with max. 2.4a (total)
1 x usb charging port at the voltage converter with max. 1a power
Parts list - what's inside
2 x Offgridtec 100w V2 Solarpanel 23V black frame
1 x Pair of solar connector compatible junction boxes for parallel connection of the two solar modules
1 x 30a pwm charge controller with clear lcd display and usb charging possibility - the device also has a 30a load output and is easy to operate - all important parameters can be read on the display
1 x 122Ah agm battery with m8 screw terminal Dimensions: 406 x 174 x 233 mm(+5mm terminal) - the battery is absolutely maintenance free and leak proof and lasts up to 10 years depending on use
1 x 1000w 12v to 230v sine wave voltage converter with a shockproof socket incl. connection cable - the rated power of 1000w can be output by the device for 15 minutes - beyond that the inverter outputs 800w and can handle short time starting currents up to 1600w
1 x 8m 6mm² professional connection cable solar module to charge controller with original Stäubli solar-connectors and high quality Lapp Ölflex 2x6mm² solar cable
1 x 1.5m 10mm² professional battery connection cable with MIDI fuse holder, 40a MIDI fuse and m8 ring terminals for connection between charge controller and battery
1 x Temperature sensor with 3m length for connection of the controller to the batrie
1 x 1m 25mm² connection cable from inverter to battery (included with the voltage converter)
1 x Fuse holder + 125A Mega fuse for installation between voltage transformer and battery positive pole for protection against short circuit
Roof mount for the solar module
Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne etc.)
Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
Fastening kit for pitched roof installation on Bieberschwanz tiles
Scope of delivery:
1x Solaranlage Autark M-Master with 2x100w solar panel, 30a pwm charge controller with lcd display and usb ports, 1000w sine wave voltage converter, 122Ah agm battery, user manuals
€741.44*
€623.06**
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and O...
Extremely versatile complete package The Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. As well as being used as a usv backup solution with a choice between mains and battery priority, this PV system can also be used as a self-consumption system. There are virtually no limits to the performance of this Solarasystem - depending on personal requirements and on request, extensions are possible, both on the module and battery side. if a higher output power is required on the inverter, additional identical devices can also be connected here to increase performance. In addition to the power electronics, the storage system and the solar modules, all components required for the connection are also included in the scope of delivery, with the exception of the solar module holder, which must be ordered separately. all other components are plug and play - this means no annoying plug installation or the like - connect and you're done. Depending on your choice, the system is supplied with or without an electricity meter. Parts list - what's inside 30x Luxen Solar 430w Full Black Solar panel Luxneri Series 5 4 x 4.8kwh Pylontech us5000 LiFePo4 storage batteries 1x victron Energy mppt SmartSolar charge controller 450/200 48v 3x victron pmp482505010 Multiplus-II 48/5000/70-50a 1x Cerbo gx + 1x gx Touch 50 from victron Energy - the communication center of your system 1x victron Energy Lynx Distributor for dc distribution and protection 1x victron Energy Lynx Power In 3x 10m Offgridtec® Professional connection cable 6mm² solar module to charge controller for the connection between solar modules and charge controller 2 x Pylontechbattery connection cable set Pylontech to inverter 2 x 2.0m 25mm² amphenol to m8 1x 1m battery cable 50mm² m8 eyelets on both sides 3x 1m battery cable 35mm² m8 eyelets on both sides 3x 10m 6mm² mc-4 connection cable 1x vE.Can to CaN-Bus bms Type a cable 1.8m aSS030710018 for connecting the Cerbo gx to the memory 2x 3m victron rj45 utp cable for connecting the MultiPlus to the Cerbo gx 3x Mega fuse 125a / 70v 1x Mega fuse 250a / 70a 2x 0.9m victron rj45 utp cable 1x Pylontech Battery cabinet for us5000 When selecting electricity meter: 1x victron vm-3p75ct Energy Meter 1x victron 5m rj45 utp cable Extended use of your HomePremium system The HomePremium system is supplied either with or without victron electricity meter and cable, whereby an energy meter with connection cable is mandatory for the installation of an Energy Storage System. With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem. Luxen Solar 430w Full Black solar module The monocrystalline and bifacial 430w Full Black Series n5 solar module fromLuxen Solarsolar module impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. The smbb half-cut cell technology was also used during production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE. Features Glass-glass module N-TOPCon cell technology smbb Half-Cut cell technology Low bos & LCOE Bifacial cell module technology excellent anti-PID and low lid performance 3 bypass diodes 30-year performance guarantee and 15-year product guarantee high cell efficiency of over 22% Half-cell technology In half-cell technology ("half-cut"), conventional silicon cells are cut in half using a laser. The resulting halves are then centrally connected in parallel, which leads to an increased output of the solar module by reducing resistance losses. Bifacial cells Bifacial means two-faced. And the name says it all: the Luxen Solar 430w n5 module is also equipped with solar cells on the back, which means that sunlight can be absorbed even better and the efficiency of the overall module is increased. Technical data maximum output: 430w Module voltage (vmp): 32.04v max. current (imp): 13.42a Open circuit voltage (voc): 38.96v Short-circuit current (Isc): 14.13a Module efficiency: 22.02% dimensions: 1722 x 1134 x 30 mm Operating temperature range: -40°C to +85°C Cells: 108 (6x18) max. operating voltage: 1500v dc Weight: 23,5kg LiFePo4 storage technology from Pylontech - proven, reliable, safe The us3000c storage battery from Pylontech is a latest-generation lithium iron phosphate battery that offers maximum safety and service life. Each module has a battery management system (bms) for comprehensive protection against deep discharge, overcharging and damage caused by high currents or extreme temperatures. Short circuits and reverse polarity are also excluded. Features of the Pylontech us3000c memory modules Extremely cycle-proof - over 6000 cycles at 95% DoD (discharge per cycle) absolutely intrinsically safe due to integrated protective shutdown (bms) High charging and discharging capacity of up to 5kw per module High storage density Low weight and compact design absolutely maintenance-free and easy to install 10-year guarantee The heart of the system - the victron MultiPlus-II 48/5000 The Multiplus-II 48/5000/70-50 from victron Energy combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 100a and enables use in ESS applications. The setting options on the MultiPlus-II are extremely varied, as are its possible applications. We have already made the most important settings for you so that the system, as it is supplied, lives up to the description "Plug and Play" - the system can therefore be used immediately without any further configuration. Performance features and characteristics of the MultiPlus-II 48/5000 PowerControl and Powerassist - increasing mains or generator output Built-in anti-islanding function and connection option for external current sensor (optional) Can be used as a backup device in grid-connected systems vE.Bus interface for parallel and three-phase operation Remote monitoring and system integration Parallel and three-phase operation Approved according to vde-ar-n 4105 Technical data 5000 w power with non-linear load - 4000 w continuous load - 9000 w peak power For 48 v battery voltage, 50 a transfer switch and 70a battery charger output voltage: 230 vaC, frequency: 50 Hz Max. efficiency: 95% Protection class IP22 Maximum flexibility thanks to two AC outputs The MultiPlus-II offers uninterrupted operation by automatically taking over the supply to consumers in the event of mains failures or interruptions to the shore/generator power. The switchover takes place in less than 20 milliseconds to ensure continuous operation of electronic devices. A second output supplies power only when alternating current is present at the input of the MultiPlus-II. This makes it possible to connect consumers such as a water heater that should not be discharged from the battery. Configuration The MultiPlus-II is supplied unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system, we can do this for you for an additional charge. To do this, place the article linked above "Offgridtec pre-configuration" in the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed. victron Energy Cerbo gx and gx Touch 50 - the communication center of your system The latest development in system monitoring from the company allows you to control and configure your system with ease. rounded off by the gxC Touch 50 - a waterproof 5 inch touchscreen - you always have an overview of your system parameters. The Cerbo's functions allow you to control and monitor your system perfectly and maximize system performance in an unprecedentedly simple way. victron Energy has developed a new system monitor that allows you to easily control and configure your system. The gx Touch 50, a waterproof 5-inch touchscreen, provides a clear overview of your system parameters. The Cerbo module allows you to precisely monitor your system and maximize performance. It is compatible with both solar charge controllers and grid-connected inverters. Mounting material and connection cable are included in the scope of delivery. The Bluetooth function of the gx Touch 50 makes accessing your system even quicker and easier. An optional wall bracket is available. victron Remote portal The victron Remote Portal (vRM) is a free victron Energy service that allows you to read out your system data remotely and configure the devices accordingly. This means that you always have full control and an overview of all relevant system parameters, even when you are away. The functionality is available online as a demo version and is ideal for getting a first impression - https://vrm.victronenergy.com/landingpage Safety note: Only have this complete system installed and commissioned by a qualified electrician.
Variants from €16,173.02*
€0.00*
€0.00**
Extremely versatile complete package The Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. As well a...
Der 1-Phasige Stromzähler DDSU666-H von Huawei (MPN: 20022248) dient dazu, den Lastverbrauch, die Exportleistung oder die PV-Stromversorgung bis zu 100A deiner Solaranlage zu messen und anzeigen zu lassen. Durch den intergierten LCD-Bildschirm, sowie dessen leichter Bedienung, lassen sich alle erfassten Daten problemlos Auslesen. Die Kommunikation wird über einen RS485-Anschluss gewährleistet. Diese erfolgt in Echtzeit und wird auch bei einer Stromunterbrechung nicht verloren gegangen. Per One-Click gestaltet sich die Inbetriebnahme des Stromzählers sehr leicht und sicher. Falls dennoch Hilfe benötigt wird, hilft ein digitaler Assistent durch die Integration.
Der DDSU666-H:
1-phasiger Smart Power Sensor
Präzise - Genauigkeitsklasse > 1
Nachhaltig - Energieverbrauch <1W
Einfache Bedienung über LCD-Display
Kommunikation per RS485
One-Click Inbetriebnahme mit Assistent
Hohe Zuverlässigkeit
Anwendung auf Industrieebene
Montageart: DIN35 Hutschiene
Technische Daten
Eingangsspannung: 176-288V AC
Abmessungen: 100 x 36 x 65,5 mm
Gewicht: 1,2 kg
Stromnetz-Typ: 1P2W
Kommunikation: RS485
Betriebstemperaturbereich: -25°C - +60°C
Lagertemperatur: -40°C - +70°C
Lieferumfang
1x Huawei Stromzähler DDSU666-H (100A 40mA) 1-Phasig
1x RS485 Anschlusskabel 10m
€117.81*
€99.00**
Der 1-Phasige Stromzähler DDSU666-H von Huawei (MPN: 20022248) dient dazu, den Lastverbrauch, die Exportleistung oder die PV-Stromversorgung...
With the luna2000-15-s0 battery storage system from Huawei is one of the three Huawei luna2000 battery systems that feature the proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. The good cycle stability and high load capacity make the battery storage system an ideal partner for a powerful photovoltaic system, which can charge the storage system several times a day. The luna2000 is modularly expandable and cascadable.In addition to the 15kWh battery modules, the luna2000-15-s0 battery storage system has a battery management system (bms), which is built into every fully-fledged Huawei battery system and therefore offers a high level of safety. The individual cells are monitored internally and protected against overvoltage, overtemperature, deep discharge, etc. in a balanced manner.Other systems:Huawei luna2000-05-S0Huawei luna2000-10-S0Compatible inverters:SUN2000-2/3/3,68/4/4,6/5/6KTL-L1SUN2000-3/4/5/6/8/10KTL-M0SUN2000-3/4/5/6/8/10KTL-M1CharacteristicsLiFePO4 storage technologyFlexible expansionIntegrated bmsMulti-scenario and multi-working modeFlexible scalabilityIntelligent operation and maintenance processesCompact and space-savingProven safetyService life over 10 yearsCompatible with many invertersHigh charging and discharging capacity possibleSimple installation and easy replacementBattery management system in every operating systemThe luna bms control module from Huawei is a battery management system that protects every battery module in the luna2000 series from unfavorable conditions and thus ensures safe and failure-free continuous operation. It does not matter how many storage modules are in use. The important thing is that one bms is used per tower. A tower consists of a maximum of three 5kWh battery modules, resulting in a capacity of 5-15kWh.Protection against:Deep discharge and overchargingOvervoltage during chargingexcessive currents during charging and dischargingOver- and undertemperatureShort circuit and reverse polarityMulti-scenario and multi-working modeThe system's on-grid and off-grid scenarios and modes allow users to view the total charging capacity of the product life cycle in real time.High cycle lifeThe extremely long cycle life of the LiFePo4 cells used make Huawei luna2000 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Huawei storage system offers several advantages over typical lead-acid batteries and other lithium technologies.Intelligent operation and maintenance proceduresThe factory settings of the system meet the requirements of the target markets. The battery can be started by pressing a single switch and supports black start. The integrated LED display of the operation management system shows the status. In addition, each user can also use the app function to carry out operations on site or remotely. Commissioning is carried out by recognizing the product in the app. With the cloud data management system, the battery can be managed anytime and anywhere.Technical specificationsBattery type: Lithium iron phosphate (LiFePo4)Nominal voltage (1-phase inverter/L1): 450 VOperating voltage range (1-phase inverter/L1): 350-560 VNominal voltage (3-phase inverter/M1): 600 VOperating voltage range (3-phase inverter/M1): 600-980 VNominal capacity: 15000 WhNormal discharge power: 5 kWMaximum discharge power: 7 kW, 10sCommunication: rs485, can (parallel operation only)Weight: 163.8 kgDimensions: 670 x 150 x 1320 mmProtection class: IP66Operating temperature range: -20°C - +55°CInstallation: Stand (standard), wall mounting (optional)Cooling: Confection coolingWarranty: 10-year manufacturer's warrantyCertificates: ce, rcm, cec, vde2510-50, iec62619, iec60730, UN38.3Due to the classification as dangerous goods, this product is shipped by a forwarding agent!Scope of delivery:3x Huawei luna2000-5-E0 battery module 5kWh1x Huawei luna bms control module
€7,376.81*
€6,199.00**
With the luna2000-15-s0 battery storage system from Huawei is one of the three Huawei luna2000 battery systems that feature the proven lithium iron ph...
Der SUN2000-4,6KTL-L1 von Huawei ist ein KI-gestützter Hybrid-Wechselrichter mit bis zu 4600W Ausgangsleistung. Dieser einphasige Inverter bietet zahlreiche Vorteile, darunter eine hohe Effizienz, eine zuverlässige Leistung und eine benutzerfreundliche Bedienung. Durch den Einsatz modernster Technologie wird der Energieertrag der Solaranlage maximiert, wodurch jede erzeugte Kilowattstunde optimal genutzt wird. Mit der SUN2000-Serie ist auch eine Batterieladung vom Netz möglich.
Die SUN2000-Serie:
KI-gestützte Lichtbogenerkennung AFCI
Höherer Ertrag: Bis zu 30% mehr Energie mit Optimierern
2x POWER Batterie-Ready: 5kW AC Ausgang plus 5kW Batterieladung
2 MPP-Tracker
LED-Anzeige
Spitzenwirkungsgrad von 98,4%
10 Jahre Herstellergarantie
Überwachung über die FusionSolar-App
Einfache Installation
Entspricht VDE-AR-N 4105
KI-gestützte Lichtbogenerkennung AFCI
Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen. Ein KI-gestützter Algorithmus erkennt präzise Lichtbogenfehler und ermöglicht eine schnelle Abschaltung des Wechselrichters als aktiven Schutz.
Hybrid-Wechselrichter
Im Gegensatz zu herkömmlichen Wechselrichtern bieten Hybrid-Wechselrichter die Möglichkeit, den erzeugten Solarstrom nicht nur ins Stromnetz zu speisen, sondern auch in Batterien zu speichern. Dadurch kann der gespeicherte Solarstrom genutzt werden, selbst wenn die Sonne nicht scheint. Eine weitere Funktion von Hybrid-Wechselrichtern besteht darin, den Stromverbrauch eines Haushalts zu optimieren, indem sie den erzeugten Solarstrom bevorzugt direkt im Haushalt verwenden, bevor er ins Netz eingespeist wird. Dies führt zu einer Verringerung der Energiekosten und einer geringeren Abhängigkeit von teurem Netzstrom.
Zwei MPP-Tracker für optimale Solar-Erträge
Mit der Maximum Power Point Tracker Technologie wird der bestmögliche Ertrag einer Solaranlage generiert. Der MPPT stellt dabei im Tagesverlauf das optimale Verhältnis zwischen Bestrahlungsstärke, Temperatur am Modul und Solarzellentyp fest. Durch die zwei MPP-Tracker im SUN-Inverter kann der optimale Arbeitspunkt für die zwei PV-Stränge getrennt voneinander optimiert werden. Die beiden Tracker arbeiten unabhängig voneinander und so hätte z.B. eine Verschattung bei einem Strang keinen Einfluss auf den zweiten.
Betriebs-Modi - Je nach System-Anforderungen konfigurierbar
Betriebsmodus: Der SUN2000 wandelt die DC-Leistung von PV-Strings in AC-Leistung um und speist diese in das Stromnetz ein. Sobald die Ausgangsleistung nicht den Anforderungen für die netzgekoppelte Stromerzeugung entspricht, schaltet er in den Standby-Modus.
Standby-Modus: Wenn die externe Umgebung nicht die Betriebsbedingungen erfüllt, schaltet der SUN2000 in den Standby-Modus und überprüft kontinuierlich ob die Voraussetzungen für den Betriebsmodus vorhanden sind.
Abschaltmodus: Wenn der SUN2000 im Standby- oder Betriebsmodus einen Abschaltbefehl oder Fehler erkennt, geht er in den Abschaltmodus über. Wenn er erkennt, dass der Fehler behoben ist oder ein Startbefehl ausgegeben wird, geht er in den Standby-Modus.
Schutzfunktionen
Lichtbogen- und Inselnetzerkennung
DC Lasttrennschalter
Isolations- und Fehlerstromüberwachung
DC- und AC-Überspannungsschutz: kompatibel mit Schutzart TYP II gem. EN / IEC 61643-11
AC-Überstrom- und Kurzschlussschutz
Überhitzungsschutz
Technische Daten
Eingang (PV)
Empfohlene maximale Modulleistung: 6900 Wp
Voller MPPT-Spannungsbereich: 90V bis 560V
Startspannung: 100 V
Max. Eingangsspannung: 600 V
Nenneingangsspannung: 360 V
Maximaler Eingangsstrom pro MPPT: 12,5 A
Max. Kurzschlussstrom: 18 A
Anzahl der MPP-Tracker: 2
Eingang (DC-Batterie)
Betriebsspannungsbereich: 350-560VDC
Max. Betriebsstrom: 15A
Max. Ladeleistung: 5000W
Max. Entladeleistung: 4600W
Ausgang (AC)
Nennleistung: 4600W
Nennausgangsspannung: 220/230/240VAC (50/60Hz)
Max. Ausgangsstrom: 23A
Allgemeine Daten
Betriebstemperaturbereich: -25°C - +60°C
Kühlung: Konvektionskühlung
Kommunikation: RS485, WLAN
Schutzart: IP65
Energieverbrauch nachts: <2,5W
Gewicht: 12kg
Abmessungen: 365 x 365 x 156 mm
Lieferumfang:
1x Huawei SUN2000 4,6KTL-L1 Hybridwechselrichter
1x PV-Steckverbinder
1x AC-Steckverbinder
1x Akkusteckverbinder
1x Signalkabelsteckverbinder
1x Antenne
1x Halterung
€1,069.81*
€899.00**
Der SUN2000-4,6KTL-L1 von Huawei ist ein KI-gestützter Hybrid-Wechselrichter mit bis zu 4600W Ausgangsleistung. Dieser einphasige Inverter bietet...
With the luna2000-5-s0 battery storage system from Huawei is one of the three Huawei luna2000 battery systems that feature the proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. The good cycle stability and high load capacity make the battery storage system an ideal partner for a powerful photovoltaic system, which can charge the storage system several times a day. The luna2000 is modularly expandable and cascadable.In addition to the 5kWh battery module, the luna2000-5-s0 battery storage system has a battery management system (bms), which is built into every fully-fledged Huawei battery system and therefore offers a high level of safety. Internally, the individual cells are monitored and protected against overvoltage, overtemperature, deep discharge, etc. in a balanced manner.Other systems:Huawei luna2000-10-S0Huawei luna2000-15-S0Compatible inverters:SUN2000-2/3/3,68/4/4,6/5/6KTL-L1SUN2000-3/4/5/6/8/10KTL-M0SUN2000-3/4/5/6/8/10KTL-M1CharacteristicsLiFePO4 storage technologyFlexible expansionIntegrated bmsMulti-scenario and multi-working modeFlexible scalabilityIntelligent operation and maintenance processesCompact and space-savingProven safetyService life over 10 yearsCompatible with many invertersHigh charging and discharging capacity possibleSimple installation and easy replacementBattery management system in every operating systemThe luna bms control module from Huawei is a battery management system that protects every battery module in the luna2000 series from unfavorable conditions and thus ensures safe and failure-free continuous operation. It does not matter how many storage modules are in use. The important thing is that one bms is used per tower. A tower consists of a maximum of three 5kWh battery modules, resulting in a capacity of 5-15kWh.Protection against:Deep discharge and overchargingOvervoltage during chargingexcessive currents during charging and dischargingOver- and undertemperatureShort circuit and reverse polarityMulti-scenario and multi-working modeThe system's on-grid and off-grid scenarios and modes allow users to view the total charging capacity of the product life cycle in real time.High cycle lifeThe extremely long cycle life of the LiFePo4 cells used make Huawei luna2000 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Huawei storage system offers several advantages over typical lead-acid batteries and other lithium technologies.Intelligent operation and maintenance proceduresThe factory settings of the system meet the requirements of the target markets. The battery can be started by pressing a single switch and supports black start. The integrated LED display of the operation management system shows the status. In addition, each user can also use the app function to carry out operations on site or remotely. Commissioning is carried out by recognizing the product in the app. With the cloud data management system, the battery can be managed anytime and anywhere.Technical specificationsBattery type: Lithium iron phosphate (LiFePo4)Nominal voltage (1-phase inverter/L1): 450 VOperating voltage range (1-phase inverter/L1): 350-560 VNominal voltage (3-phase inverter/M1): 600 VOperating voltage range (3-phase inverter/M1): 600-980 VNominal capacity: 5000 WhNormal discharge power: 2.5 kWMaximum discharge power: 3.5 kW, 10sCommunication: rs485, can (parallel operation only)Weight: 63.8 kgDimensions: 670 x 150 x 600 mmProtection class: IP66Operating temperature range: -20°C - +55°CInstallation: Stand (standard), wall mounting (optional)Cooling: Confection coolingWarranty: 10-year manufacturer's warrantyCertificates: ce, rcm, cec, vde2510-50, iec62619, iec60730, UN38.3Due to the classification as dangerous goods, this product is shipped by a forwarding agent!Scope of delivery:1x Huawei luna2000-5-E0 battery module 5kWh1x Huawei luna bms control module
€3,092.81*
€2,599.00**
With the luna2000-5-s0 battery storage system from Huawei is one of the three Huawei luna2000 battery systems that feature the proven lithium iron pho...
Der SUN2000-4KTL-L1 von Huawei ist ein KI-gestützter Hybrid-Wechselrichter mit bis zu 4000W Ausgangsleistung. Dieser einphasige Inverter bietet zahlreiche Vorteile, darunter eine hohe Effizienz, eine zuverlässige Leistung und eine benutzerfreundliche Bedienung. Durch den Einsatz modernster Technologie wird der Energieertrag der Solaranlage maximiert, wodurch jede erzeugte Kilowattstunde optimal genutzt wird. Mit der SUN2000-Serie ist auch eine Batterieladung vom Netz möglich.
Die SUN2000-Serie:
KI-gestützte Lichtbogenerkennung AFCI
Höherer Ertrag: Bis zu 30% mehr Energie mit Optimierern
2x POWER Batterie-Ready: 5kW AC Ausgang plus 5kW Batterieladung
2 MPP-Tracker
LED-Anzeige
Spitzenwirkungsgrad von 98,4%
10 Jahre Herstellergarantie
Überwachung über die FusionSolar-App
Einfache Installation
Entspricht VDE-AR-N 4105
KI-gestützte Lichtbogenerkennung AFCI
Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen. Ein KI-gestützter Algorithmus erkennt präzise Lichtbogenfehler und ermöglicht eine schnelle Abschaltung des Wechselrichters als aktiven Schutz.
Hybrid-Wechselrichter
Im Gegensatz zu herkömmlichen Wechselrichtern bieten Hybrid-Wechselrichter die Möglichkeit, den erzeugten Solarstrom nicht nur ins Stromnetz zu speisen, sondern auch in Batterien zu speichern. Dadurch kann der gespeicherte Solarstrom genutzt werden, selbst wenn die Sonne nicht scheint. Eine weitere Funktion von Hybrid-Wechselrichtern besteht darin, den Stromverbrauch eines Haushalts zu optimieren, indem sie den erzeugten Solarstrom bevorzugt direkt im Haushalt verwenden, bevor er ins Netz eingespeist wird. Dies führt zu einer Verringerung der Energiekosten und einer geringeren Abhängigkeit von teurem Netzstrom.
Zwei MPP-Tracker für optimale Solar-Erträge
Mit der Maximum Power Point Tracker Technologie wird der bestmögliche Ertrag einer Solaranlage generiert. Der MPPT stellt dabei im Tagesverlauf das optimale Verhältnis zwischen Bestrahlungsstärke, Temperatur am Modul und Solarzellentyp fest. Durch die zwei MPP-Tracker im SUN-Inverter kann der optimale Arbeitspunkt für die zwei PV-Stränge getrennt voneinander optimiert werden. Die beiden Tracker arbeiten unabhängig voneinander und so hätte z.B. eine Verschattung bei einem Strang keinen Einfluss auf den zweiten.
Betriebs-Modi - Je nach System-Anforderungen konfigurierbar
Betriebsmodus: Der SUN2000 wandelt die DC-Leistung von PV-Strings in AC-Leistung um und speist diese in das Stromnetz ein. Sobald die Ausgangsleistung nicht den Anforderungen für die netzgekoppelte Stromerzeugung entspricht, schaltet er in den Standby-Modus.
Standby-Modus: Wenn die externe Umgebung nicht die Betriebsbedingungen erfüllt, schaltet der SUN2000 in den Standby-Modus und überprüft kontinuierlich ob die Voraussetzungen für den Betriebsmodus vorhanden sind.
Abschaltmodus: Wenn der SUN2000 im Standby- oder Betriebsmodus einen Abschaltbefehl oder Fehler erkennt, geht er in den Abschaltmodus über. Wenn er erkennt, dass der Fehler behoben ist oder ein Startbefehl ausgegeben wird, geht er in den Standby-Modus.
Schutzfunktionen
Lichtbogen- und Inselnetzerkennung
DC Lasttrennschalter
Isolations- und Fehlerstromüberwachung
DC- und AC-Überspannungsschutz: kompatibel mit Schutzart TYP II gem. EN / IEC 61643-11
AC-Überstrom- und Kurzschlussschutz
Überhitzungsschutz
Technische Daten
Eingang (PV)
Empfohlene maximale Modulleistung: 6000 Wp
Voller MPPT-Spannungsbereich: 90V bis 560V
Startspannung: 100 V
Max. Eingangsspannung: 600 V
Nenneingangsspannung: 360 V
Maximaler Eingangsstrom pro MPPT: 12,5 A
Max. Kurzschlussstrom: 18 A
Anzahl der MPP-Tracker: 2
Eingang (DC-Batterie)
Betriebsspannungsbereich: 350-560VDC
Max. Betriebsstrom: 15A
Max. Ladeleistung: 5000W
Max. Entladeleistung: 4400W
Ausgang (AC)
Nennleistung: 4000W
Nennausgangsspannung: 220/230/240VAC (50/60Hz)
Max. Ausgangsstrom: 20A
Allgemeine Daten
Betriebstemperaturbereich: -25°C - +60°C
Kühlung: Konvektionskühlung
Kommunikation: RS485, WLAN
Schutzart: IP65
Energieverbrauch nachts: <2,5W
Gewicht: 12kg
Abmessungen: 365 x 365 x 156 mm
Lieferumfang:
1x Huawei SUN2000 4KTL-L1 Hybridwechselrichter
1x PV-Steckverbinder
1x AC-Steckverbinder
1x Akkusteckverbinder
1x Signalkabelsteckverbinder
1x Antenne
1x Halterung
€867.51*
€729.00**
Der SUN2000-4KTL-L1 von Huawei ist ein KI-gestützter Hybrid-Wechselrichter mit bis zu 4000W Ausgangsleistung. Dieser einphasige Inverter bietet z...
With the luna2000-10-s0 battery storage system from Huawei is one of the three Huawei luna2000 battery systems that feature the proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. The good cycle stability and high load capacity make the battery storage system an ideal partner for a powerful photovoltaic system, which can charge the storage system several times a day. The luna2000 is modularly expandable and cascadable.In addition to the 10kWh battery modules, the luna2000-10-s0 battery storage system has a battery management system (bms), which is built into every fully-fledged Huawei battery system and therefore offers a high level of safety. Internally, the individual cells are monitored and protected against overvoltage, overtemperature, deep discharge, etc. in a balanced manner.Other systems:Huawei luna2000-05-S0Huawei luna2000-15-S0Compatible inverters:SUN2000-2/3/3,68/4/4,6/5/6KTL-L1SUN2000-3/4/5/6/8/10KTL-M0SUN2000-3/4/5/6/8/10KTL-M1CharacteristicsLiFePO4 storage technologyFlexible expansionIntegrated bmsMulti-scenario and multi-working modeFlexible scalabilityIntelligent operation and maintenance processesCompact and space-savingProven safetyService life over 10 yearsCompatible with many invertersHigh charging and discharging capacity possibleSimple installation and easy replacementBattery management system in every operating systemThe luna bms control module from Huawei is a battery management system that protects every battery module in the luna2000 series from unfavorable conditions and thus ensures safe and failure-free continuous operation. It does not matter how many storage modules are in use. The important thing is that one bms is used per tower. A tower consists of a maximum of three 5kWh battery modules, resulting in a capacity of 5-15kWh.Protection against:Deep discharge and overchargingOvervoltage during chargingexcessive currents during charging and dischargingOver- and undertemperatureShort circuit and reverse polarityMulti-scenario and multi-working modeThe system's on-grid and off-grid scenarios and modes allow users to view the total charging capacity of the product life cycle in real time.High cycle lifeThe extremely long cycle life of the LiFePo4 cells used make Huawei luna2000 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Huawei storage system offers several advantages over typical lead-acid batteries and other lithium technologies.Intelligent operation and maintenance proceduresThe factory settings of the system meet the requirements of the target markets. The battery can be started by pressing a single switch and supports black start. The integrated LED display of the operation management system shows the status. In addition, each user can also use the app function to carry out operations on site or remotely. Commissioning is carried out by recognizing the product in the app. With the cloud data management system, the battery can be managed anytime and anywhere.Technical specificationsBattery type: Lithium iron phosphate (LiFePo4)Nominal voltage (1-phase inverter/L1): 450 VOperating voltage range (1-phase inverter/L1): 350-560 VNominal voltage (3-phase inverter/M1): 600 VOperating voltage range (3-phase inverter/M1): 600-980 VNominal capacity: 10000 WhNormal discharge power: 5 kWMaximum discharge power: 7 kW, 10sCommunication: rs485, can (parallel operation only)Weight: 113.8 kgDimensions: 670 x 150 x 960 mmProtection class: IP66Operating temperature range: -20°C - +55°CInstallation: Stand (standard), wall mounting (optional)Cooling: Confection coolingWarranty: 10-year manufacturer's warrantyCertificates: ce, rcm, cec, vde2510-50, iec62619, iec60730, UN38.3Due to the classification as dangerous goods, this product is shipped by a forwarding agent!Scope of delivery:2x Huawei luna2000-5-E0 battery module 5kWh1x Huawei luna bms control module
€5,234.81*
€4,399.00**
With the luna2000-10-s0 battery storage system from Huawei is one of the three Huawei luna2000 battery systems that feature the proven lithium iron ph...
Die Umschaltbox von Huawei ist eine Back-Up Box (MPN: B0), die eine Ersatzstromversorgung auf einer Phase ermöglicht. Bei einem Stromausfall erfolgt die Umschaltung automatisch. Dabei trennt sie die Stromversorgung eines bestimmten Feldes vom Netz und verbindet es mit dem Ausgang der Notstromversorgung (EPS). Sie ist kompatibel mit allen Luna2000 Speichermodellen und dreiphasigen SUN2000 KTL L1 Hybrid-Wechselrichtern. Die Installation sollte von einem qualifizierten Elektro-Fachkraft durchgeführt werden.
Über die Luna2000 Back-Up-Box
Automatische Erkennung und Umschaltung
Zuverlässige Back-Up-Power
Nachladen der Batterie aus der Sonne im Back-Up-Modus
Neustart des Systems nach Abschaltung der Batterie
Technische Daten
Allgemein
Betriebstemperaturbereich: -20°C - +45°C
Abmessungen: 400 x 350 x 130 mm
Gewicht: 11 kg
Schutzart: IP65
AC-Ausgang (Netzgebunden)
Netzanschluss: Dreiphasig
Betriebsspannung: 380V / 400 V
AC-Netzfrequenz: 50/60 Hz
AC-Spannungsbereich: 342-440 V
AC-Ausgang (Back-Up)
Lastanschluss: Einphasig
Nennspannung: 220V / 230V
AC-Frequenz: 50/60 Hz
Max. Scheinleistung: 3300 VA
Max. Ausgangsstrom: 15,2 A
Umschaltzeit: <3 Sek.
AC-Eingang (Wechselrichter)
Nennspannung: 380V / 400V
AC-Frequenz: 50/60 Hz
Kompatible Wechselrichter: SUN2000-3/4/5/6/8/10KTL-L1
Lieferumfang:
1x Huawei Luna2000 BackUp 3PH Umschaltbox
€749.58*
€629.90**
Die Umschaltbox von Huawei ist eine Back-Up Box (MPN: B0), die eine Ersatzstromversorgung auf einer Phase ermöglicht. Bei einem Stromausfall...
Der DTSU666-H von Huawei (MPN: 20022249) ist ein 3-phasiger Stromzähler und dient dazu, den Lastverbrauch, die Exportleistung oder die PV-Stromversorgung bis zu 250A zu messen und anzeigen zu lassen. Durch den intergierten LCD-Bildschirm, sowie dessen leichter Bedienung, lassen sich alle erfassten Daten problemlos Auslesen. Die Kommunikation wird über einen RS485-Anschluss gewährleistet. Diese erfolgt in Echtzeit und wird auch bei einer Stromunterbrechung nicht verloren gegangen. Per One-Click gestaltet sich die Inbetriebnahme des Stromzählers sehr leicht und sicher. Falls dennoch Hilfe benötigt wird, hilft ein digitaler Assistent durch die Integration.
Der DTSU666-H:
3-phasiger Smart Power Sensor
Präzise - Genauigkeitsklasse > 1
Nachhaltig - Energieverbrauch <1W
Einfache Bedienung über LCD-Display
Kommunikation per RS485
Leistungsaufnahme < 1W
Montageart: DIN35 Hutschiene
Technische Daten
Eingangsspannung: 176-288V AC
Netzspannung Phase-Phase: 304-499V AC
Abmessungen: 100 x 72 x 65,5 mm
Gewicht: 1,5 kg
Stromnetz-Typ: 3P4W
Kommunikation: RS485
Betriebstemperaturbereich: -25°C - +60°C
Lagertemperatur: -40°C - +70°C
Lieferumfang
1x Huawei Stromzähler DTSU666-H (250A 50mA) 3-Phasig
1x RS485 Anschlusskabel 10m
€178.38*
€149.90**
Der DTSU666-H von Huawei (MPN: 20022249) ist ein 3-phasiger Stromzähler und dient dazu, den Lastverbrauch, die Exportleistung oder die PV-St...
Wir präsentieren den KI-gestützten und batteriebetriebenen SUN2000-5KTL-L1 Hybrid-Wechselrichter von Huawei mit einer Ausgangsleistung von 5000 W im schicken und kompakten Gehäuse. Speziell konzipiert für private PV-Anlagen mit einphasigem Netzanschluss, wird dieser leistungsstarke Wechselrichter deine Energieerzeugung durch intelligentes Energiemanagement und zuverlässige Performance optimieren. Er wandelt die Energie deiner Photovoltaikmodule in nutzbaren Strom für dein Zuhause und zeichnet sich durch seine hohe Effizienz aus.
Die SUN2000-Serie:
Hybrid-Wechselrichter 1-phasig
2 MPP-Tracker mit intelligenter Steuerung und Fehlerdiagnose
KI-gestützte Lichtbogenerkennung AFCI
Natürliche Konvektionskühlung
10 Jahre Herstellergarantie
Überspannungsschutz AC&DC Typ II
Drahtlose Netzwerkverbindung möglich
Akkubereit, kompatibel mit Huawei LUNA2000
Schutzart IP65, geeignet für den Innen- und Außenbereich
LED-Anzeige
Maximierte Sicherheit und Effizienz
Dank fortschrittlicher Sicherheitsfeatures und modernster Schutzmechanismen kannst du dich auf einen sicheren Betrieb verlassen. Der gemäß IP65 zertifizierte Wechselrichter verfügt über zwei MPP-Tracker, die für eine clevere Steuerung und fehlerfreie Diagnose sorgen und somit die maximale Ausbeute deiner Energiequelle sicherstellen. Ein Überspannungsschutz vom Typ II auf AC- und DC-Seite gewährleistet zuverlässigen Anlagenschutz und die natürliche Konvektionskühlung maximiert die Effizienz, während der serienmäßige KI-gestützte Lichtbogenschutz die Sicherheit erhöht. Außerdem punktet der einphasige Hybrid-Wechselrichter mit smarten Überwachungsfunktionen, die es dir ermöglichen, den Status deiner Solaranlage über die zugehörige App in Echtzeit zu verfolgen und eventuelle Probleme frühzeitig zu erkennen.
KI-gestützte Lichtbogenerkennung AFCI
Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen. Ein KI-gestützter Algorithmus erkennt präzise Lichtbogenfehler und ermöglicht eine schnelle Abschaltung des Wechselrichters als aktiven Schutz.
Überspannungsschutz AC&DC Typ II
Überspannungsschutzgeräte, auch SPDs genannt, stellen essentielle Sicherheitsvorrichtungen dar, die die elektrischen Komponenten des Wechselrichters vor schädlichen Überspannungen bewahren. AC-SPDs schirmen die Wechselstromseite ab, während DC-SPDs die Gleichstromseite schützen. Dadurch werden überschüssige Spannungsimpulse, welche z.B. durch Blitzeinschläge oder Netzschwankungen verursacht werden, direkt abgeleitet.
Hybrid-Wechselrichter
Im Gegensatz zu herkömmlichen Wechselrichtern bieten Hybrid-Wechselrichter die Möglichkeit, den erzeugten Solarstrom nicht nur ins Stromnetz zu speisen, sondern auch in Batterien zu speichern. Dadurch kann der gespeicherte Solarstrom genutzt werden, selbst wenn die Sonne nicht scheint. Eine weitere Funktion von Hybrid-Wechselrichtern besteht darin, den Stromverbrauch eines Haushalts zu optimieren, indem sie den erzeugten Solarstrom bevorzugt direkt im Haushalt verwenden, bevor er ins Netz eingespeist wird. Dies führt zu einer Verringerung der Energiekosten und einer geringeren Abhängigkeit von teurem Netzstrom.
Einfach, kompakt und kompatibel
Die Installation des kompakten Huawei-Wechselrichters gestaltet sich dank durchdachtem Design und drahtloser Netzwerkverbindung einfach und unkompliziert. Der batteriebetriebene SUN2000-5KTL-L1 Hybrid-Wechselrichter ist akkubereit und ergänzt sich perfekt mit dem Batteriemodul LUNA2000-5-E0 mit 5 kWh oder den kompletten Speichereinheiten der Serie LUNA2000 mit 5 kWh, 10 kWh oder 15 kWh inkl. BMS von Huawei.
Technische Daten:
Eingang (PV)
Empfohlene maximale Modulleistung: 7500 Wp
Voller MPPT-Spannungsbereich: 90V bis 560 V
Startspannung: 100 V
Max. Eingangsspannung:600 V
Nenneingangsspannung: 360 V
Maximaler Eingangsstrom pro MPPT: 12,5 A
Max. Kurzschlussstrom: 18 A
Anzahl der MPP-Tracker: 2
Eingang (DC-Batterie)
Betriebsspannungsbereich: 350-560 VDC
Max. Betriebsstrom: 15 A
Max. Ladeleistung: 5000 W
Max. Entladeleistung: 5000 W
Ausgang (AC)
Nennleistung AC: 5000 W
Nennausgangsspannung: 220 Vac / 230 Vac / 240 Vac
Max. Ausgangsstrom: 25 A
Allgemeine Daten:
Max. Wirkungsgrad: 98,4 %
Betriebstemperaturbereich: -25°C - +60°C
Kühlung: Konvektionskühlung
Kommunikation: RS485, WLAN, optional Ethernet
Schutzart: IP65
Energieverbrauch nachts: <2,5W
Abmessungen: 365×365×156 mm
Gewicht: 12 kg
Lieferumfang:
1× Huawei SUN2000-5KTL-L1 Hybrid-Wechselrichter
1× PV-Steckverbinder
1× AC-Steckverbinder
1× Akkusteckverbinder
1× Signalkabelsteckverbinder
1× Antenne
1× Halterung
€1,392.56*
€1,170.22**
Wir präsentieren den KI-gestützten und batteriebetriebenen SUN2000-5KTL-L1 Hybrid-Wechselrichter von Huawei mit einer Ausgangsleis...
Das Huawei LUNA2000-5-E0 ist ein Speichermodul mit langlebiger und innovativer Lithium-Eisenphosphat-Technologie. Das Modul zeichnet sich, auch bei hoher Leistung, durch seine lange Lebensdauer und einer hohen Sicherheit aus. Des Weiteren verfügt sie über einen Energie-Optimierer für maximale Effizienz und benötigt ein Schutzmodul, welches für Langlebigkeit und störungsfreien Betrieb sorgt.
Der LUNA2000-5-S0 Batteriespeicher besitzt neben dem 5kWh starken Batteriemodul ein Batterie Management System (BMS), dass in jedem vollwertigen Huawei Batteriesystem eingebaut ist und aufgrund dessen viel Sicherheit bietet. Intern werden die einzelnen Zellen überwacht und ausgeglichen vor Überspannung, Übertemperatur, Tiefentladung usw. geschützt.
Die LUNA2000-Speicher
LiFePO4 Speichertechnologie
Flexibel Erweitern
Multi-Szenario- und Multi-Arbeitsmodus
Flexible Skalierbarkeit
Intelligente Betriebs- und Wartungsvorgänge
Kompakt und platzsparend
Bewährte Sicherheit
Lebensdauer über 10 Jahre
Mit vielen Wechselrichtern kompatibel
Hohe Lade- und Entladeleistung möglich
Einfache Installation und einfacher Ersatz
Zugehörige Systeme:
Huawei LUNA2000-5-S0
Huawei LUNA2000-10-S0
Huawei LUNA2000-15-S0
Kompatible Wechselrichter:
SUN2000-2/3/3,68/4/4,6/5/6KTL-L1
SUN2000-3/4/5/6/8/10KTL-M0
SUN2000-3/4/5/6/8/10KTL-M1
Multi-Szenario- und Multi-Arbeitsmodus
Die netzgekoppelten und netzentkoppelten Szenarien und Modi des Systems ermöglichen den Nutzern, die Gesamtladekapazität des Produktlebenszyklus in Echtzeit abzufragen.
Sicherheitskonzept und Ersatzversorgung
Die LUNA2000 sorgt für eine zuverlässige Stromversorgung im Haushalt. Ihr mehrstufiges Sicherheitssystem schützt auf allen Ebenen und schaltet bei Problemen einzelne Speichermodule sicher ab, ohne die anderen zu beeinträchtigen. Bei Stromausfällen kann eine zusätzliche HUAWEI Backup-Box als Notstromversorgung dienen. Tagsüber laden Solarpaneele den Speicher nach, was selbst bei langen Ausfällen die Energieversorgung sichert.
Hohe Zyklen-Lebensdauer
Die extrem hohe Zyklen-Lebensdauer der verbauten LiFePo4 Zellen machen Huawei LUNA2000 Module zur optimalen Speicherlösung für Photovoltaikanlagen. Unabhängig ob es sich bei dem Solarsystem um eine netzgeführte- oder eine Inselanlage handelt, bietet der Huawei Speicher einige Vorteile gegenüber typischen Bleibatterien und anderen Lithium Technologien.
Intelligente Betriebs- und Wartungsvorgänge
Die Werkseinstellungen des Systems entsprechen den Anforderungen der Zielmärkte. Der Akku kann durch den Druck eines einzelnen Schalters gestartet werden und unterstützt den Schwarzstart. Die integrierte LED-Anzeige des Betriebsmanagementsystems zeigt den Status an. Darüber hinaus kann jeder Nutzer auch die App-Funktion nutzen, um die Vorgänge vor Ort oder aus der Ferne durchzuführen. Die Inbetriebnahme erfolgt über die Erkennung des Produkts in der App. Mit dem Cloud-Datenverwaltungssystem kann der Akku jederzeit und überall verwaltet werden.
Technische Daten
Batterie-Typ: Lithium-Eisenphosphat (LiFePo4)
Nennspannung (1-phasiger Wechselrichter/L1): 450 V
Betriebsspannungsbereich (1-phasiger Wechselrichter/L1): 350-560 V
Nennspannung (3-phasiger Wechselrichter/M1): 600 V
Betriebsspannungsbereich (3-phasiger Wechselrichter/M1): 600-980 V
Nennkapazität: 5000 Wh
Normale Entladeleistung: 2,5 kW
Maximale Entladeleistung: 3,5 kW, 10s
Kommunikation: RS485, CAN (nur Parallelbetrieb)
Gewicht: 50 kg
Abmessungen: 670 x 150 x 360 mm
Schutzart: IP66
Betriebstemperaturbereich: -20°C - +55°C
Installation: Standfuß (Standard), Wandmontage (optional)
Kühlung: Konfektionskühlung
Garantie: 10 Jahre Herstellergarantie
Zertifikate: CE, RCM, CEC, VDE2510-50, IEC62619, IEC60730, UN38.3
Aufgrund der Klassifizierung als Gefahrgut wird dieses Produkt per Spedition verschickt!
Lieferumfang:
1x Huawei LUNA2000-5-E0 Batteriemodul 5kWh
€2,207.33*
€1,854.90**
Das Huawei LUNA2000-5-E0 ist ein Speichermodul mit langlebiger und innovativer Lithium-Eisenphosphat-Technologie. Das Modul zeichnet sich, auch bei ho...
Der SUN2000-3KTL-L1 von Huawei ist ein KI-gestützter Hybrid-Wechselrichter mit bis zu 3000W Ausgangsleistung. Dieser einphasige Inverter bietet zahlreiche Vorteile, darunter eine hohe Effizienz, eine zuverlässige Leistung und eine benutzerfreundliche Bedienung. Durch den Einsatz modernster Technologie wird der Energieertrag der Solaranlage maximiert, wodurch jede erzeugte Kilowattstunde optimal genutzt wird. Mit der SUN2000-Serie ist auch eine Batterieladung vom Netz möglich.
Die SUN2000-Serie:
KI-gestützte Lichtbogenerkennung AFCI
Höherer Ertrag: Bis zu 30% mehr Energie mit Optimierern
2x POWER Batterie-Ready: 5kW AC Ausgang plus 5kW Batterieladung
2 MPP-Tracker
LED-Anzeige
Spitzenwirkungsgrad von 98,3%
10 Jahre Herstellergarantie
Überwachung über die FusionSolar-App
Einfache Installation
Entspricht VDE-AR-N 4105
KI-gestützte Lichtbogenerkennung AFCI
Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen. Ein KI-gestützter Algorithmus erkennt präzise Lichtbogenfehler und ermöglicht eine schnelle Abschaltung des Wechselrichters als aktiven Schutz.
Hybrid-Wechselrichter
Im Gegensatz zu herkömmlichen Wechselrichtern bieten Hybrid-Wechselrichter die Möglichkeit, den erzeugten Solarstrom nicht nur ins Stromnetz zu speisen, sondern auch in Batterien zu speichern. Dadurch kann der gespeicherte Solarstrom genutzt werden, selbst wenn die Sonne nicht scheint. Eine weitere Funktion von Hybrid-Wechselrichtern besteht darin, den Stromverbrauch eines Haushalts zu optimieren, indem sie den erzeugten Solarstrom bevorzugt direkt im Haushalt verwenden, bevor er ins Netz eingespeist wird. Dies führt zu einer Verringerung der Energiekosten und einer geringeren Abhängigkeit von teurem Netzstrom.
Zwei MPP-Tracker für optimale Solar-Erträge
Mit der Maximum Power Point Tracker Technologie wird der bestmögliche Ertrag einer Solaranlage generiert. Der MPPT stellt dabei im Tagesverlauf das optimale Verhältnis zwischen Bestrahlungsstärke, Temperatur am Modul und Solarzellentyp fest. Durch die zwei MPP-Tracker im SUN-Inverter kann der optimale Arbeitspunkt für die zwei PV-Stränge getrennt voneinander optimiert werden. Die beiden Tracker arbeiten unabhängig voneinander und so hätte z.B. eine Verschattung bei einem Strang keinen Einfluss auf den zweiten.
Betriebs-Modi - Je nach System-Anforderungen konfigurierbar
Betriebsmodus: Der SUN2000 wandelt die DC-Leistung von PV-Strings in AC-Leistung um und speist diese in das Stromnetz ein. Sobald die Ausgangsleistung nicht den Anforderungen für die netzgekoppelte Stromerzeugung entspricht, schaltet er in den Standby-Modus.
Standby-Modus: Wenn die externe Umgebung nicht die Betriebsbedingungen erfüllt, schaltet der SUN2000 in den Standby-Modus und überprüft kontinuierlich ob die Voraussetzungen für den Betriebsmodus vorhanden sind.
Abschaltmodus: Wenn der SUN2000 im Standby- oder Betriebsmodus einen Abschaltbefehl oder Fehler erkennt, geht er in den Abschaltmodus über. Wenn er erkennt, dass der Fehler behoben ist oder ein Startbefehl ausgegeben wird, geht er in den Standby-Modus.
Schutzfunktionen
Lichtbogen- und Inselnetzerkennung
DC Lasttrennschalter
Isolations- und Fehlerstromüberwachung
DC- und AC-Überspannungsschutz: kompatibel mit Schutzart TYP II gem. EN / IEC 61643-11
AC-Überstrom- und Kurzschlussschutz
Überhitzungsschutz
Technische Daten
Eingang (PV)
Empfohlene maximale Modulleistung: 4500 Wp
Voller MPPT-Spannungsbereich: 90V bis 560V
Startspannung: 100 V
Max. Eingangsspannung: 600 V
Nenneingangsspannung: 360 V
Maximaler Eingangsstrom pro MPPT: 12,5 A
Max. Kurzschlussstrom: 18 A
Anzahl der MPP-Tracker: 2
Eingang (DC-Batterie)
Betriebsspannungsbereich: 350-560VDC
Max. Betriebsstrom: 15A
Max. Ladeleistung: 5000W
Max. Entladeleistung: 3300W
Ausgang (AC)
Nennleistung: 3000W
Nennausgangsspannung: 220/230/240VAC (50/60Hz)
Max. Ausgangsstrom: 15A
Allgemeine Daten
Betriebstemperaturbereich: -25°C - +60°C
Kühlung: Konvektionskühlung
Kommunikation: RS485, WLAN
Schutzart: IP65
Energieverbrauch nachts: <2,5W
Gewicht: 12kg
Abmessungen: 365 x 365 x 156 mm
Lieferumfang:
1x Huawei SUN2000 3KTL-L1 Hybridwechselrichter
1x PV-Steckverbinder
1x AC-Steckverbinder
1x Akkusteckverbinder
1x Signalkabelsteckverbinder
1x Antenne
1x Halterung
€533.93*
€499.00**
Der SUN2000-3KTL-L1 von Huawei ist ein KI-gestützter Hybrid-Wechselrichter mit bis zu 3000W Ausgangsleistung. Dieser einphasige Inverter bietet z...
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions: 70 x 30 x 39mm
€1.27*
€1.07**
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions...
The bc01 Female from Betteri (mpn bc01B) is used for connection to a Envertech-, Hoymiles- or Huayu inverter. The opposite side can be connected to a h07rn-f rubber hose cable with a diameter of 10-14mm. It is a three-pole socket made of UV-resistant material. In addition, it is dustproof and waterproof according to protection class ip67, making it suitable for indoor and outdoor use. Product features Suitable for 1-phase inverters from e.g. Envertech, Hoymiles or Huayu Suitable for cables with a diameter of 10-14mm Dust and waterproof according to ip67 UV resistant - Suitable for indoor and outdoor installation Technical features Number of poles: 3-pole Material: plastic Operating temperature range: -40°C - +85°C Rated voltage: 230v AC Rated current: 25A Dimensions: 85.5 x 34.8 x 34.8 mm Weight: approx. 50g Scope of delivery: 1x Betteri bc01 female power plug
€5.34*
€4.49**
The bc01 Female from Betteri (mpn bc01B) is used for connection to a Envertech-, Hoymiles- or Huayu inverter. The opposite side can be connected to a ...
The end cap of Betterie (mpn bc01c) is used to close the unused 3 pole AC socket of the PV inverter of e.g. Envertech, Hoymiles or Huayu. Product features Suitable for 1-phase inverter from e.g. Envertech, Hoymiles or Huayu Closure of Betteri bc01 Female connector Dust and waterproof according to ip67 UV resistant - Suitable for indoor and outdoor mounting Scope of delivery: 1x Betteri Closure cap for bc01 socket
€3.56*
€2.99**
The end cap of Betterie (mpn bc01c) is used to close the unused 3 pole AC socket of the PV inverter of e.g. Envertech, Hoymiles or Huayu. Product f...
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various components.Thanks to it's adhesive power the use of clamps is mostly unnecassary. The Dekasyl MS-5 also serves as sealent between similar materials or when mechanical connections are used.
Application:
Elastic connections and sealing for trains, caravans, trucks, cars,...
Glueing windows of buses, trains, caravans,...
Glueing of edge profiles (aluminium or polyester) of trailers
Glueing of polyester components with metal frame
Characteristics:
Free of solvents, isocyanate and PVC
Very UV- and age-resistant
Very high initial strength. Very high adhesion in general even without priming on various surfaces.
Constantly elastic within a temperature range of -40°C to +120°
Neutral, odorless and quick-setting
After skim-development paintable - normally this does not influence the setting-process
Compatible with most industrial painting systems, alkyd resin paint as well as dispersion paint (because of the many different types of industrial paints a material compatibility test is recommended)
We recommend to mount our spoilers and cable entries only with Dekasyl adhesive together with DEKAvator as this connection had the best outcome in a laboratory test.
Why Dekasyl?
Manufacturers of caravans like Fendt, Dethleffs, Burstner, Carthago, Pilote and Hymer use Dekalin-products in many different areas, for example as sealent for roofs, side panels, undercoating, glueing of PMMA-windows, sound-proofing, engine-covering, and many more.As a global partner of the caravan and camping industry Dekalin provides you with a wide range of latest technology and supports sellers in realizing their demands. They offer special solutions for sealing, glueing, damming and repairing.
Details:Filling: 290mlMPN: 6252412Color: blackDelivery scope: 1 tube 290ml
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various compone...
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various components.Thanks to it's adhesive power the use of clamps is mostly unnecassary. The Dekasyl MS-5 also serves as sealent between similar materials or when mechanical connections are used.
Application:
Elastic connections and sealing for trains, caravans, trucks, cars,...
Glueing windows of buses, trains, caravans,...
Glueing of edge profiles (aluminium or polyester) of trailers
Glueing of polyester components with metal frame
Characteristics:
Free of solvents, isocyanate and PVC
Very UV- and age-resistant
Very high initial strength. Very high adhesion in general even without priming on various surfaces.
Constantly elastic within a temperature range of -40°C to +120°
Neutral, odorless and quick-setting
After skim-development paintable - normally this does not influence the setting-process
Compatible with most industrial painting systems, alkyd resin paint as well as dispersion paint (because of the many different types of industrial paints a material compatibility test is recommended)
We recommend to mount our spoilers and cable entries only with Dekasyl adhesive together with DEKAvator as this connection had the best outcome in a laboratory test.
Why Dekasyl?
Manufacturers of caravans like Fendt, Dethleffs, Burstner, Carthago, Pilote and Hymer use Dekalin-products in many different areas, for example as sealent for roofs, side panels, undercoating, glueing of PMMA-windows, sound-proofing, engine-covering, and many more.As a global partner of the caravan and camping industry Dekalin provides you with a wide range of latest technology and supports sellers in realizing their demands. They offer special solutions for sealing, glueing, damming and repairing.
Details:Filling: 290mlMPN: 6252212Color: whiteDelivery scope: 1 tube 290ml
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various compone...
Dekaseal 8936 from Dekalin is the classic sealant. The dab-on sealant impresses with high tightness, uv-resistance, as well as elasticity, since it does not harden and remains somewhat permanently tacky. Optimal for use in applications without visible joint edges (flaps, hatches, side windows, keder strips, exterior sockets, etc.). The simple processing convinces professionals and laymen alike. There is no need for additional cleaning work, as protruding rust can be easily removed by dabbing without leaving any residue. The sealant can be used without pretreatment on clean, dry, dust- and grease-free surfaces used in vehicle construction/caravaning. Dekaseal 8936 can be applied by hand or with the aid of a compressed air gun. Its strengths, apart from its high impermeability, are that it is easy to dismantle, i.e. it is well suited for connections that need to be undone at a later date. Applications Sealing of overlaps and joints in e.g. bus, caravan, motor home, train and truck construction Sealing of screw connections Sealing of sun roof systems Application under facing strips for installation of windows and skylights in caravans and motor homes, trailers and in container construction Suitable for application between metal plates, glass, gfk, wood and other materials Sealing rubber-glass joints in buses, cars, trains and trucks Properties Very low water vapor permeability (0.1 - 0.2 g/day/m²) excess Dekaseal 8936 can be easily removed after a few minutes Very good uv aging resistance, proven quality Resistant to water, road salt, weathering influences Sealant must be fixed between a mechanical joint Generally good adhesion to most substrates without pretreatment Long shelf life, unopened min. two years Cannot be overpainted Adhesion In general, Dekaseal 8936 adheres well without pretreatment to clean, dry, dust and grease free substrates of aluminum, stainless steel, zinc, copper, brass, powder coated metal, most painted metal surfaces, glass, pvc, polyester (grp), painted wood and other surfaces. No adhesion without pretreatment on polyethylene, polypropylene and Teflon®. For properties on substrates not mentioned and further information, please contact Dekalin. Processing Dekaseal 8936 can be applied by hand or with a compressed air gun. When using compressed air, 2 - 3 bar are required. The areas to be sealed must be solid, clean, dry and free of grease. Paint and smooth into joints, crevices, etc. excess material can be dabbed off with itself after a short flash-off time. The material can be removed with turpentine substitute. The sealant remains slightly tacky after drying, but is odorless and compatible with paint. Technical data Base material: polyisobutene, synthetic resins, fillers and solvents Specific gravity (20°C), din 51757: approx. 1.4 kg/liter Temperature resistance: -30°C - +100°C Application temperature: +5°C - +35°C Color: anthracite Packaging size: 310ml cartridge Scope of delivery: 1x Dekalin Dekaseal 8936 cartridge 310ml anthracite
Dekaseal 8936 from Dekalin is the classic sealant. The dab-on sealant impresses with high tightness, uv-resistance, as well as elasticity, since it do...
Self-drilling screws are used, for example, to connect supporting structures, sheet metal or façade cladding. The high-quality a2 stainless steel provides a high level of corrosion protection and durability, making the screw ideal for indoor and outdoor use.
€0.49*
Self-drilling screws are used, for example, to connect supporting structures, sheet metal or façade cladding. The high-quality a2 stainless steel prov...
The hm-350 from Hoymiles is the perfect micro inverter for your balcony power plant. The compact lightweight (only 1.98kg including the 1.35m AC cable) is suitable for solar power production with a solar panel up to 440 watts peak. Just like all other microinverters from Hoymiles, it is suitable for long operating hours and wide PV panel application because its startup is very low (only 22v) and the DC input range of the operating voltage (16-60V) is extremely wide.
Features
Minimize the effects of e.g. shading, dust or aging due to mppt
High-quality energy harvesting with high mppt accuracy
Optimal system reliability
Peak efficiency of 96.7%
12-year product warranty
High level of security thanks to integrated protection functions
Easy installation
Long service life
6000V surge protection
Complies with vde-ar-n 4105: 2018 and EN50549-1:2019
Optionally possible: Monitoring via S-Miles App or S-Miles Cloud
A DTU Lite is required for system monitoring.
To have the option of changing settings in addition to monitoring, a DTU Pro is required instead of the DTU Lite.
How it works
The Hoymiles microinverter converts the solar power generated by your photovoltaic system, AC grid compliant and feeds it directly into the utility grid. Each Hoymiles microinverter is individually connected to a PV module of your system for this purpose. This unique configuration means that each PV module is controlled by an individual maximum peak power point tracker (mppt). This ensures that the maximum available power from each individual module is fed into the utility grid, regardless of the output of the other PV modules in the system. Thus, if individual PV modules in the system are affected by shading, soiling, orientation, or mismatch, the hm-350 still ensures peak power for its associated PV module. The result is the maximum possible energy production from your PV system.
Optimal reliability
Microinverter systems are inherently more reliable than conventional inverters. The decentralized design of a microinverter system ensures that the entire PV system will not fail in the event of a malfunction. Hoymiles microinverters are designed to operate at full power in ambient temperatures up to +65°C (150°F). The microinverter enclosure is designed for outdoor installation and is IP67 rated.
Simple design
PV systems with Hoymiles microinverters are very easy to design and install. You can install a combination of PV modules of different types, in any orientation and in a desired number (Maximum number of devices in series: 14). You do not need to install cumbersome conventional inverters. Each microinverter can be quickly mounted on the PV mounting rack or directly under the PV module. The PV module is connected to the microinverter directly on site, eliminating the risk of exposing people to dangerously high DC voltage.
Technical data
Recommended module power: up to 440W
Peak power mppt of voltage range: 33~48V
Starting voltage: 22V
Battery voltage range: 16~60V
Maximum input voltage: 60V
Maximum input current: 11.5A
Maximum input short circuit current: 15A
Rated output power: 350VA
Rated output voltage: 1.52a at 230V
Rated output current: 230V
CEC weighted efficiency: 96.50%
Ambient temperature range: -40~+65°C
Dimensions (WxHxD): 182 x 164 x 29mm
Weight: 1.98kg (including 1.35m AC cable)
Enclosure rating: IP67
Scope of delivery
Hoymiles hm-350 micro inverter
€261.68*
€219.90**
The hm-350 from Hoymiles is the perfect micro inverter for your balcony power plant. The compact lightweight (only 1.98kg including the 1.35m AC cable...
The Hoymiles hms Field-Connector is an essential part of the Hoymiles hms PlugandPlay cable system, specifically designed for PV systems with a single microinverter.The Field-Connector connects directly to the inverter and provides an easy connection option to an AC cable. This straightforward plug-and-play design allows users to quickly and easily connect the single inverter system to the power grid.Connection to the power grid must only be done by an electrician.Hoymiles hms cable systemThe hms cable system is an innovative solution for wiring hms inverters in PV systems. It offers a user-friendly plug-and-play design that allows for easier, faster and more reliable installation. The flexible hms cable system allows users to combine cables of different sizes or lengths to cost-effectively implement the desired cabling configuration.ExamplesIn a system with one hms inverter:1x hms Connection cable PlugandPlay with field connector and Schuko plugor1x hms Field connector for own assembly of a cableFor a system with e.g. 2 hms inverters:1x hms Sealing Cap1x hms Connection Cable2x hms Trunk ConnectorOptional: - hms Extension Connector for extension of the cable - hms Disconnect Tool for disassembling the connectorTechnical DataRated voltage: 300VRated current: 12APower frequency and dielectric strength: 3000VACTemperature range: -40 to 85°CDimensions: 135 x 38 x 25mmProtection class: IP68for cables with outer diameter 8 - 9,5mmApplicable cables: 16/18 awg, 1.0/1.5mm² copper cableScope of delivery:1x Hoymiles hms Field Connector
€10.59*
€8.90**
The Hoymiles hms Field-Connector is an essential part of the Hoymiles hms PlugandPlay cable system, specifically designed for PV systems with a single...