Ecoflow backup kit Retrofit kit with DeltaPro Powerstation Optional additional batteries and Smart Home Panel
Shipped in 2-5 days
€5,499.00*
€4,621.01**
The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a matching MultiPlus-II inverter and a Cerbo gx from Victron Energy for system monitoring. This allows you to secure your energy supply even if there is a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply of the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Areas of application of the Offgridtec backup kit:
- Emergency power supply
- Off-grid solar systems (stand-alone systems)
- Retrofitting of existing PV systems
- Grid-connected power supply
- UPS systems
What does the Offgridtec backup system contain?
- Pylontech us2000c 2.4kWh LiFePO4 battery (2x or 4x depending on selection)
- 1x Victron MultiPlus-II 48/3000/35-32 230v device combination
- 1x Victron Lynx Distributor
- 1x Victron Cerbo gx control panel
- 1x Victron gx Touch 50 display panel for Cerbo gx
- 1x 1,8m VE.Can to Can-Bus bms type A cable
- 1x 3m Victron rj45 utp cable
- 1x 1m Offgridtec battery cable 50mm² M8 eyelets
- 1x 125a 70v mega fuse
- 1x Pylontech battery connection cable set
The Multiplus device combination is pre-configured to fit the Pylontech batteries.
The storage solution - Pylontech us2000c batteries
The us2000c storage is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage. Thanks to state-of-the-art technology, the highest level of safety and a long service life are guaranteed, even with regular deep discharge.
- Extremely cycle resistant - over 6000 cycles at 95% DoD
- Absolutely intrinsically safe lithium technology
- High charge and discharge capacity possible
- Integrated bms
- Very high storage density - low weight and compact design
- Absolutely maintenance-free and durable
- Pre-charge function to protect the ESS system from overvoltage function
The electronics core - the Victron Multiplus-II device combination
The Multiplus-II is a high-end device combination from Victron Energy, consisting of 48v battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50a and extends the potential range of use to energy storage system applications. The Multiplus can therefore be ideally used as a backup device in grid-connected and grid-independent power supply systems.
- 3000W non-linear load power - 2400w continuous load - 6000w peak power
- for 48v battery voltage
- 32A transfer switch
- 35A battery charger
- Output voltage: 230 vac, frequency: 50 Hz
- max. efficiency: 95%
- Protection class: IP22
System monitoring with the Victron Cerbo gx and gx Toch display
Easily control and monitor your system with the Cerbo gx communication center. The flexible connectivity options maximize your system performance. Control of your system is possible regardless of location thanks to the Cerbo gx. With the gx Touch 50 display, you always have all the parameters of your system in view and can make changes easily and quickly.