Fothermo psu charger 230v / 12v

With the 10L water boiler from Fothermo (mpn pvb-10) you can generate your hot water with sustainable and cost-effective solar power. The connection of the solar panels is done in a few seconds with a few simple steps and provides you with a reliable hot water supply. Product highlights 10 liter photovoltaic hot water boiler Hot water for the sink, shower or kitchen No connection to the mains required Complete system with MC4 PV connections No specialist required for installation Digital temperature display 1/2" water connection on the water heater Optional reheating via mains possible (mains adapter not included) Recommended solar power We recommend the connection of a 150Wp solar module Connect modules with at least 100Wp power and rated voltage 18v Connect max. 3 x 325Wp modules in parallel Technical data Volume: 10 liters max. heating power: 550W max. current: 15,5A Protection class: ip X1 Energy efficiency class: A+ Dimensions: 280 x 280 x 440 mm Weight: 7,2 kg Scope of delivery: 1x Fothermo 10 liter hot water boiler (pvb-10) 1x mounting set

With this 3m battery cable (MPN BC-03), Fothermo water boilers can be connected directly to a suitable battery and heated. This allows excess energy from photovoltaically charged batteries to be converted into heat in the boiler. The Fothermo boilers can be used with 12V and 24V batteries. Depending on the mode set, the boiler either uses the energy provided by the battery immediately or the surplus energy after the battery is fully charged. The 10 litre boiler can be charged excellently via a 12V or 24V battery system. The 30-litre boiler can easily be charged via a 24V battery. If it were heated with a 12V battery, the heating times would be very long. The 80 litre boiler can be charged via the 24V battery. However, the relatively long heating times must be taken into account here. Depending on the application and water consumption, this can still be useful. Scope of delivery: 1x Fothermo 3m battery cable (BC-03)

With the 10L caravan water boiler from Fothermo (mpn 1004-cpvb-10) you can generate your hot water with sustainable and cost-effective solar power. Connecting the solar panels takes just a few seconds and provides you with a reliable hot water supply. With the mounting set a vertical, but also horizontal application is possible. Product highlights 10 liter photovoltaic hot water boiler with mounting Hot water for your caravan No connection to the mains required Complete system with MC4 PV connections No specialist required for installation Digital temperature display 1/2" water connection on the water heater Anti Frost: Easy to drain the water in winter. Recommended solar power We recommend the connection of a 100-300Wp solar module Connection of max. 5x1500Wp modules in parallel. Simple mounting The suspension bar is securely attached to the wall using two supplied dowels and screws. After mounting the wall mounting bracket, the hot water tank is hung. After hanging, the hot water tank is attached to the wall using the third dowel and screw (hexagonal screw) through the eyelet at the bottom of the casing. A drill hole template is included with the product. Technical data Volume: 10 liters max. heating power: 550W max. current: 15,5A Protection class: ip X1 Energy efficiency class: A+ Dimensions: 280 x 280 x 440 mm Weight: 7,2 kg Scope of delivery: 1x Fothermo 10 liter hot water boiler (1004-cpvb-10) 1x mounting set