The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands placed on a solar accumulator today. Maximum safety and a long service life are guaranteed even with regular deep discharge thanks to the latest technology. The latest battery of the market-leading manufacturer with now 3.5 kWh per module has again a battery management system (bms) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters. Features Extremely cycle resistant - over 6000 cycles at 95% DoD More usable energy content than the previous model US3000 Lifetime over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging power possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharge overvoltage during charging excessive currents during charging and discharging over and under temperature Short circuit and reverse polarity Constant monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS. High cycle life The extremely high cycle life of the installed LiFePo4 cells make Pylontech us3000c modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-connected or stand-alone, the Pylontech storage system offers several advantages over typical lead-acid batteries and other lithium technologies. Technical data Battery Type: Lithium Iron Phosphate (LiFePo4) Rated voltage: 48V Rated capacity: 3552 Wh Usable capacity (95% DoD): 3374 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 90A Max. (Discharge) charging current: 74A Recommended charge/discharge current: 37A Communication: rs485, CAN Weight: 32 kg Dimensions: 442 x 420 x 132 mm Protection class: IP20 Temperature range charge: 0°C - +50°C Temperature range discharge: -10°C - +50°C Temperature range storage: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 years manufacturer warranty Certification: TÜV, ce, UN38.8 Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1x Pylontech us3000c LiFePO4 3.5 kWh 1x cable set parallel connection incl. grounding 1x rj45 data cable 1x mounting screws 1x user manual
From
€1,013.31*
From €851.52**
The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands...
The Pytes e-box 48100r-c (mpn 110402100007) is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, sophisticated design and impressive performance. The battery is compact, easy to install, maintenance-free and can be used as the basic building block of an energy storage system by connecting it in parallel. Applications range from self-consumption coverage in private homes to small commercial and industrial energy storage systems, as well as in telecommunication stations.The Pytes E-BoxLatest generation LFP storageOver 6000 cycles at 90% DoDIntelligent energy managementIdeal for emergency power supplyExtensive compatibilityModularly expandableCAN and rs485 communicationIntelligent energy managementThe intelligent Pytes battery offers a comprehensive energy management system. Through real-time measurements, monitoring and management, it optimizes the system service life using intelligent algorithms. The battery thus ensures efficient and sustainable use of the available energy.Reliable emergency power supplyThe simple installation and user-friendly design make Pytes batteries a practical option for ensuring an uninterrupted power supply in your home. With their intelligent control features, Pytes batteries can optimize energy consumption and maximize battery life to ensure your backup power supply is efficient and reliable.Long service life and maximum safetyPytes batteries are characterized by their impressive service life and high level of safety. With over 6000 cycles at 90% depth of discharge (dod), they offer an exceptionally long service life. Whether it is a grid-connected solar system or a self-sufficient stand-alone system, the Pytes storage system offers several clear advantages over conventional lead batteries and other lithium technologies.Technical dataBattery chemistry: Lithium iron phosphate (LFP)Nominal voltage: 51.2 VVoltage range: 47.5-57.6 VNominal power: 100 AhNominal energy: 5.12 kWhMax. Charging current: 50 AMax. Discharge: 50 ACharging temperature: 0~50°CDischarging temperature: -10~50°CEfficiency: =95%Communication protocol: rs-232, rs-485, CANCycle life: >6000 cycles at 90% DoDDimensions: 440 x 620 x 117 mmWeight: 51 kgScope of delivery:1x Pytes E-Box 48100r-c
€1,307.81*
€1,099.00**
The Pytes e-box 48100r-c (mpn 110402100007) is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, s...
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A variety of different board battery types can be charged via the primary charging output (BATT-1). The battery spectrum ranges from AGM, GEL and liquid lead acid to state-of-the-art LiFePO4 and Li-NiCoMn battery systems. The secondary battery charge output (BATT-2) is designed for a starter battery that is at the same voltage level as BATT-1. The unit automatically detects the system voltage of the starter battery (BATT-2) and charging of the BATT-2 begins as soon as the preset conditions are met.
The controller uses the advanced MPPT control algorithm that minimises the maximum power point loss rate and loss time, quickly tracks the maximum power point (MPP) of the PV generator, and processes the maximum energy from the PV generator under all conditions. Energy utilisation in a PV system with MPPT controller is increased by 20 to 30% compared to the PWM charging method.
Features Highlights of the MPPT Pro DUO 30 A
Max Power-Point Tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%.
Advanced MPPT control algorithm to minimise MPP loss rate and minimise time loss.
Higher range of MPP operating voltage to improve PV module utilisation.
Possibility of limiting the charging power by user or automatic charging current (BATT-1).
Digital circuit control of adaptive three-stage charging mode to improve BATT-1 lifetime.
The product will enter power saving mode if no manual input has been made for a long time and charging conditions are not met (PV<5v).>
100% charge and discharge in the operating temperature range.
AES control signal for auto-refrigerator to avoid energy waste.
Standard Modbus protocol and RS485 communication port (5V/200mA).
Overview of the most important technical features
Maximum charging current: 30A at a battery voltage of 12V or 24V.
Optional remote display with mounting frame available.
Supports all major battery types.
Active temperature equalisation for optimal charging and ensuring long battery life.
Max. Solar power 390W at 12V system voltage and 780W at 24V system voltage.
100V max. PV input voltage
Grounding: Negative
Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH)
Connection terminals Battery 1: 16mm² (AWG6) / Battery 2: 4mm² (AWG12)
Weight: 1,4KG
Diameter of mounting holes: 5mm
Energy consumption: 26mA at 12V / 15mA at 24V
Max. Efficiency: 98
Intelligent energy saver
If there is no manual operation for an extended period of time and charging conditions are not present, the MPPT-Pro Duo will switch to energy saving mode, reducing the unit's energy consumption to a minimum. This behaviour also reduces wear and tear on the unit, which is reflected in a significantly longer service life. The system parameters are displayed and set directly via the intuitive control panel on the controller or via the MT11 remote control (accessory).
System communication and protection functions
The refrigerator's AES control signal is built into the controller, which delivers excess solar power to the refrigerator to prevent energy waste. The protection class of the MPPT Duo is IP33. It resists splashing water and is dust-tight. Our MPPT Pro DUO has multiple protection functions, including battery overcharge protection, discharge protection and reverse polarity protection of PV and battery, which effectively ensure the safety, stability and service life of the solar system.
Scope of delivery:
1x Offgridtec 1-01-011200 MPPT DUO charge controller.
1x instruction manual
€111.84*
€93.98**
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A vari...
The Multiplus-II 48/3000/35-32 gx is a high-end device combination from victron Energy (mpn pmp482306000) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 50 a and the potential range of use to ess applications. The inverter module delivers a whopping 3000 w at non-linear load, or 2400 w at linear continuous load. the 48 v battery charger is also very well proportioned, with 35 a charging power, and is complemented by a 32 a transfer switch that allows lightning-fast switching between aC connections. Compared to the rest of the series, the gx variants have an integrated gx display with numerous other connection options. important features of the Multiplus-II 48/3000/35-32 gx integrated gx control unit with various communication ports PowerControl and Powerassist -increase of mains or generator performance built-in anti-islanding function and connection for external current sensor (optional) can be used as a backup device in grid-connected systems for power supply in case of grid failures can be used in various ess (Energy Storage System) applications best suited for professional seafaring, yachts, vehicles and land-based, off-grid applications vE.Bus interface for parallel and three-phase operation, remote monitoring and system integration virtually unlimited power through parallel and three-phase operation can be configured on-site or remotely using vEConfigure software* technical features 3000w power at non-linear load 2400 w continuous load and 6000 w peak power for 48 v battery voltage, 32 a transfer switch and 35 a battery charger output voltage: 230 vaC, frequency: 50 Hz max. efficiency is 95%, protection class IP22 always enough power thanks to PowerControl and Powerassist a maximum mains or generator current can be set on the Multiplus-II 48/3000/35-32 gx. The MultiPlus-II then takes into account other connected AC consumers and only uses the current that is "left over" to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The Powerassist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus-II immediately compensates for insufficient generator, shore power or mains power with energy from the battery. if the load is reduced, i.e. if consumers are switched off, the energy that is then available again in sufficient quantities can be used to charge the batteries Solar power: alternating current even in the event of a power failure The device can be used with both non-grid-connected and grid-connected pv systems, as well as with other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters. maximum flexibility thanks to two AC outputs The main output ensures uninterrupted operation. In the event of a grid failure or interruption of the shore/generator power, the MultiPlus-II takes over the supply of the connected consumers. Switching occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic equipment is guaranteed. The second output supplies power only when AC power is available at the input of the MultiPlus-II. consumers that must not discharge the battery, such as a water heater, can be connected to this output. Scope of the integrated gx device A vE.Can interface This can be used to connect vE.Can devices from victron (e.g. vE.Can mppt). The port can also be reconfigured via the remote console for use with a compatible CaN bus Li-Ion battery. 1xUSB connection 1x Ethernet port 1x vE.Direct connection many possibilities for system expansion Settings can be changed within minutes using the vEConfigure software (requires a computer or laptop and MK3 USB interface).multiple monitoring and control options are available: Color Control gx, venus gx, Octo gx, CaNvu gx, laptop, computer, Bluetooth (with the optional vE.Bus Smart Dongle), battery monitor, Digital Multi control panel Remote configuration and monitoring Install a Color Control gx or other gx products to connect to the Internet. Operating data can be stored and viewed free of charge on our vRM (victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed. Scope of delivery: 1x victron pmp482306000 Multiplus-II 48/3000/35-32 gx 230 v 1x instruction manual
€800.10*
€672.35**
The Multiplus-II 48/3000/35-32 gx is a high-end device combination from victron Energy (mpn pmp482306000) that combines classic Multiplus components w...
The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal for 12v systems thanks to its 20v operating voltage. In Offgridtec mono solar modules only cells of the highest quality grade are installed and guarantee a constant high quality and performance with maximum service life thanks to state-of-the-art manufacturing. Features of Offgridtec 150w 12v mono solar panel proven quality directly from Offgridtec manufactured according to the latest standards monocrystalline solar cells extremely resistant ESG glass makes the module usable even in the most adverse environmental conditions ideal for 12v systems on land or in mobile solar systems 2 bypass diodes - minimized power loss in shaded conditions The mono 150w 12v is one of over 40 proven solar panels from the Offgridtec portfolio and participates in Offgridtecs experience in manufacturing high quality 12v and 24v solar cells. The module can be used in very adverse operating conditions thanks to the extremely resistant solar glass. It can withstand heavy hail and storms or extreme cold and heat without any problems and thanks to the integrated bypass diodes, the module can continue to produce power even in shaded or low light conditions. The most important technical data at a glance Power (Pmax): 150w Working voltage (Vmp): 20 V Open circuit voltage (Voc): 24 V max. current (Imp): 7.5 A Short circuit current (Isc): 8.1 A max. system voltage: 1000 V permissible ambient temperature: -40°C - +85°C Dimensions: 1140 x 680 x 35 mm Weight: 12 kg Universally applicable Offgridtecs 150w 12v Mono is universally applicable for example in 12 Volt Solaranlagen on garden houses, allotments or for the power supply of lighting applications, self-sufficient systems of signal and surveillance technology and many more. But also in mobile systems such as in mobile home solar systems this panel makes a good figure. The connection cables are 80 cm long and equipped with MC4 connectors. Scope of delivery: Offgridtec 3-01-001255 150w mono 12v solar panel
€130.78*
€109.90**
The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal f...
The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in the range. It has a 3-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged.
Performance that sets standards
The fsp-2 195w Ultra is equipped with American SPR back-contact cells from SunPower. The look of the cells is completely black, which also gives the fsp-2 195w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and set new standards in this power class in combination with the low weight and compact dimensions of the fsp-2 panel.
extensive application possibilities:
excellent usable in the camping area
or for expeditions, climbing tours and much more...
for vehicles and boats without fixed solar installation ...
and numerous other applications in different areas...
technical highlights fsp-2 195w ultra foldable solar panel
Rated power: 195wp
Number of sides: 3 x 65 Wp
Module voltage (Vmp): 33,5 V
Max. Charge current (Imp): 5,82 A
Open circuit voltage (Voc): 39,4 V
Short circuit current (Isc): 6,17 A
Dimensions closed: 820 x 440 x 40 mm
Dimensions open designed: 820 x 1545 x 60 mm
Weight: 7,12 Kg
ETFE coating
SunPower high performance cells
6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side
0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller)
1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side
Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse
the included Profi-Connection Kit
The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller.
For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse.
customizable on request
All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred.
about the fsp-2 series
As with all Offgridtec solar module series, high quality has been emphasized in the fsp-2 series. The fsp-2 195w works with highly effective solar cells. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is coated with ETFE coating, which provides better protection and at the same time ensures very high light transmittance. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions.
Scope of delivery
1x Offgridtec fsp-2 195w 12v, 3-01-012680
1x Offgridtec fsp-2 Connection-Kit
€403.23*
€338.85**
The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in...
Besides a 290ml cartridge this handy Dekalin adhesive-set also includes the Dekalin Dekavator, DEKACLEAN cloths and a sheet of very fine sandpaper for an ideal preparation of the surface.
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various components.Thanks to it's adhesive power the use of clamps is mostly unnecassary. The Dekasyl MS-5 also serves as sealent between similar materials or when mechanical connections are used.
Application:
Elastic connections and sealing for trains, caravans, trucks, cars,...
Glueing windows of buses, trains, caravans,...
Glueing of edge profiles (aluminium or polyester) of trailers
Glueing of polyester components with metal frame
Characteristics:
Free of solvents, isocyanate and PVC
Very UV- and age-resistant
Very high initial strength. Very high adhesion in general even without priming on various surfaces.
Constantly elastic within a temperature range of -40°C to +120°
Neutral, odorless and quick-setting
After skim-development paintable - normally this does not influence the setting-process
Compatible with most industrial painting systems, alkyd resin paint as well as dispersion paint (because of the many different types of industrial paints a material compatibility test is recommended)
We recommend to mount our spoilers and cable entries only with Dekasyl adhesive together with DEKAvator as this connection had the best outcome in a laboratory test.
Why Dekasyl?
Manufacturers of caravans like Fendt, Dethleffs, Burstner, Carthago, Pilote and Hymer use Dekalin-products in many different areas, for example as sealent for roofs, side panels, undercoating, glueing of PMMA-windows, sound-proofing, engine-covering, and many more.As a global partner of the caravan and camping industry Dekalin provides you with a wide range of latest technology and supports sellers in realizing their demands. They offer special solutions for sealing, glueing, damming and repairing.
Details:Glue color: blackDelivery scope: 1x cartridge 290ml Dekalin 6252412 Dekasyl MS-5 adhesive black, 1x sheet of sandpaper, 1x Dekalin Dekavator 6257812 bottle 30ml, DEKACLEAN cleaning cloths
Besides a 290ml cartridge this handy Dekalin adhesive-set also includes the Dekalin Dekavator, DEKACLEAN cloths and a sheet of very fine sandpaper for...
Dieses Set enthält alles was Sie brauchen um Module mit je max. 1m Breite auf einem Ziegeldach zu befestigen. Die enthaltenen Dach-Haken sind spezielle für Ziegeldächer konstruiert. Durch hochwertigste korrosionsfreie Materialien aus Edelstahl und Aluminium ist eine sichere und langlebige Montage gewährleistet.
Die Stücklisten der Befestigungskits sind für eine Montage der Module direkt nebeneinander konzipiert. Sollten Sie z.B. zwei Reihen untereinander mit je drei Solarmodulen planen benötigen Sie zwei Kits für je drei Module.
Beinhaltet:
Dachhaken 3-fach verstellbar (Edelstahl)
Solar-Profilschienen (Aluminium)
Endklemmen (Aluminium)
Nutensteine (Aluminium)
Endkappen
Alle notwendigen Schrauben und Muttern
Hinweis:
Nur für gerahmte Module mit 30mm/35mm Rahmenstärke
Module sind nicht im Lieferumfang enthalten
Variants from €106.95*
€255.45*
€214.66**
Dieses Set enthält alles was Sie brauchen um Module mit je max. 1m Breite auf einem Ziegeldach zu befestigen. Die enthaltenen Dach-Haken sind spe...
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and October. The generated power is stored in the cycle-proof 122Ah agm battery - the high-quality charge controller with integrated display gives you information about the charge status of the battery while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 1000w (15min)
Features of the Autark M-Master
If required, module side expandable by 2 x 100w with low installation effort
Average daily yield between March and October: approx. 800wh (approx. 66Ah)
Plug & Play ready-to-connect system - plug together and go
Allows operation of 12v and 230v loads, as well as 5v usb consumers
usb charging possibility directly at the charge controller (max. 2,4A)
Easy to read lcd display informs about all operating parameters
Flexible mounting possibility thanks to 8m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb included)
Charge controller enables temperature compensated charging - temperature sensor included in delivery
Configurable 12v load output at the charge controller for loads up to max. 30a - suitable e.g. for lighting control
Application areas
This complete system can be used in many ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. The installation on the motor home is also conceivable - we also have the corresponding brackets and adhesive sets for the attachment.
Extensive connection options
230v ac 50hz 1000w (15min - 1000w / permanent - 800w / short time (starting currents) - 1600w) Schuko socket on the sine wave voltage converter
12v consumer output with 30a power directly at the charge controller
2 x usb charging port at the charge controller with max. 2.4a (total)
1 x usb charging port at the voltage converter with max. 1a power
Parts list - what's inside
2 x Offgridtec 100w V2 Solarpanel 23V black frame
1 x Pair of solar connector compatible junction boxes for parallel connection of the two solar modules
1 x 30a pwm charge controller with clear lcd display and usb charging possibility - the device also has a 30a load output and is easy to operate - all important parameters can be read on the display
1 x 122Ah agm battery with m8 screw terminal Dimensions: 406 x 174 x 233 mm(+5mm terminal) - the battery is absolutely maintenance free and leak proof and lasts up to 10 years depending on use
1 x 1000w 12v to 230v sine wave voltage converter with a shockproof socket incl. connection cable - the rated power of 1000w can be output by the device for 15 minutes - beyond that the inverter outputs 800w and can handle short time starting currents up to 1600w
1 x 8m 6mm² professional connection cable solar module to charge controller with original Stäubli solar-connectors and high quality Lapp Ölflex 2x6mm² solar cable
1 x 1.5m 10mm² professional battery connection cable with MIDI fuse holder, 40a MIDI fuse and m8 ring terminals for connection between charge controller and battery
1 x Temperature sensor with 3m length for connection of the controller to the batrie
1 x 1m 25mm² connection cable from inverter to battery (included with the voltage converter)
1 x Fuse holder + 125A Mega fuse for installation between voltage transformer and battery positive pole for protection against short circuit
Roof mount for the solar module
Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne etc.)
Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
Fastening kit for pitched roof installation on Bieberschwanz tiles
Scope of delivery:
1x Solaranlage Autark M-Master with 2x100w solar panel, 30a pwm charge controller with lcd display and usb ports, 1000w sine wave voltage converter, 122Ah agm battery, user manuals
€741.44*
€623.06**
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and O...
Extremely versatile complete package The Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. As well as being used as a usv backup solution with a choice between mains and battery priority, this PV system can also be used as a self-consumption system. There are virtually no limits to the performance of this Solarasystem - depending on personal requirements and on request, extensions are possible, both on the module and battery side. if a higher output power is required on the inverter, additional identical devices can also be connected here to increase performance. In addition to the power electronics, the storage system and the solar modules, all components required for the connection are also included in the scope of delivery, with the exception of the solar module holder, which must be ordered separately. all other components are plug and play - this means no annoying plug installation or the like - connect and you're done. Depending on your choice, the system is supplied with or without an electricity meter. Parts list - what's inside 30x Luxen Solar 430w Full Black Solar panel Luxneri Series 5 4 x 4.8kwh Pylontech us5000 LiFePo4 storage batteries 1x victron Energy mppt SmartSolar charge controller 450/200 48v 3x victron pmp482505010 Multiplus-II 48/5000/70-50a 1x Cerbo gx + 1x gx Touch 50 from victron Energy - the communication center of your system 1x victron Energy Lynx Distributor for dc distribution and protection 1x victron Energy Lynx Power In 3x 10m Offgridtec® Professional connection cable 6mm² solar module to charge controller for the connection between solar modules and charge controller 2 x Pylontechbattery connection cable set Pylontech to inverter 2 x 2.0m 25mm² amphenol to m8 1x 1m battery cable 50mm² m8 eyelets on both sides 3x 1m battery cable 35mm² m8 eyelets on both sides 3x 10m 6mm² mc-4 connection cable 1x vE.Can to CaN-Bus bms Type a cable 1.8m aSS030710018 for connecting the Cerbo gx to the memory 2x 3m victron rj45 utp cable for connecting the MultiPlus to the Cerbo gx 3x Mega fuse 125a / 70v 1x Mega fuse 250a / 70a 2x 0.9m victron rj45 utp cable 1x Pylontech Battery cabinet for us5000 When selecting electricity meter: 1x victron vm-3p75ct Energy Meter 1x victron 5m rj45 utp cable Extended use of your HomePremium system The HomePremium system is supplied either with or without victron electricity meter and cable, whereby an energy meter with connection cable is mandatory for the installation of an Energy Storage System. With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem. Luxen Solar 430w Full Black solar module The monocrystalline and bifacial 430w Full Black Series n5 solar module fromLuxen Solarsolar module impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. The smbb half-cut cell technology was also used during production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE. Features Glass-glass module N-TOPCon cell technology smbb Half-Cut cell technology Low bos & LCOE Bifacial cell module technology excellent anti-PID and low lid performance 3 bypass diodes 30-year performance guarantee and 15-year product guarantee high cell efficiency of over 22% Half-cell technology In half-cell technology ("half-cut"), conventional silicon cells are cut in half using a laser. The resulting halves are then centrally connected in parallel, which leads to an increased output of the solar module by reducing resistance losses. Bifacial cells Bifacial means two-faced. And the name says it all: the Luxen Solar 430w n5 module is also equipped with solar cells on the back, which means that sunlight can be absorbed even better and the efficiency of the overall module is increased. Technical data maximum output: 430w Module voltage (vmp): 32.04v max. current (imp): 13.42a Open circuit voltage (voc): 38.96v Short-circuit current (Isc): 14.13a Module efficiency: 22.02% dimensions: 1722 x 1134 x 30 mm Operating temperature range: -40°C to +85°C Cells: 108 (6x18) max. operating voltage: 1500v dc Weight: 23,5kg LiFePo4 storage technology from Pylontech - proven, reliable, safe The us3000c storage battery from Pylontech is a latest-generation lithium iron phosphate battery that offers maximum safety and service life. Each module has a battery management system (bms) for comprehensive protection against deep discharge, overcharging and damage caused by high currents or extreme temperatures. Short circuits and reverse polarity are also excluded. Features of the Pylontech us3000c memory modules Extremely cycle-proof - over 6000 cycles at 95% DoD (discharge per cycle) absolutely intrinsically safe due to integrated protective shutdown (bms) High charging and discharging capacity of up to 5kw per module High storage density Low weight and compact design absolutely maintenance-free and easy to install 10-year guarantee The heart of the system - the victron MultiPlus-II 48/5000 The Multiplus-II 48/5000/70-50 from victron Energy combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 100a and enables use in ESS applications. The setting options on the MultiPlus-II are extremely varied, as are its possible applications. We have already made the most important settings for you so that the system, as it is supplied, lives up to the description "Plug and Play" - the system can therefore be used immediately without any further configuration. Performance features and characteristics of the MultiPlus-II 48/5000 PowerControl and Powerassist - increasing mains or generator output Built-in anti-islanding function and connection option for external current sensor (optional) Can be used as a backup device in grid-connected systems vE.Bus interface for parallel and three-phase operation Remote monitoring and system integration Parallel and three-phase operation Approved according to vde-ar-n 4105 Technical data 5000 w power with non-linear load - 4000 w continuous load - 9000 w peak power For 48 v battery voltage, 50 a transfer switch and 70a battery charger output voltage: 230 vaC, frequency: 50 Hz Max. efficiency: 95% Protection class IP22 Maximum flexibility thanks to two AC outputs The MultiPlus-II offers uninterrupted operation by automatically taking over the supply to consumers in the event of mains failures or interruptions to the shore/generator power. The switchover takes place in less than 20 milliseconds to ensure continuous operation of electronic devices. A second output supplies power only when alternating current is present at the input of the MultiPlus-II. This makes it possible to connect consumers such as a water heater that should not be discharged from the battery. Configuration The MultiPlus-II is supplied unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system, we can do this for you for an additional charge. To do this, place the article linked above "Offgridtec pre-configuration" in the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed. victron Energy Cerbo gx and gx Touch 50 - the communication center of your system The latest development in system monitoring from the company allows you to control and configure your system with ease. rounded off by the gxC Touch 50 - a waterproof 5 inch touchscreen - you always have an overview of your system parameters. The Cerbo's functions allow you to control and monitor your system perfectly and maximize system performance in an unprecedentedly simple way. victron Energy has developed a new system monitor that allows you to easily control and configure your system. The gx Touch 50, a waterproof 5-inch touchscreen, provides a clear overview of your system parameters. The Cerbo module allows you to precisely monitor your system and maximize performance. It is compatible with both solar charge controllers and grid-connected inverters. Mounting material and connection cable are included in the scope of delivery. The Bluetooth function of the gx Touch 50 makes accessing your system even quicker and easier. An optional wall bracket is available. victron Remote portal The victron Remote Portal (vRM) is a free victron Energy service that allows you to read out your system data remotely and configure the devices accordingly. This means that you always have full control and an overview of all relevant system parameters, even when you are away. The functionality is available online as a demo version and is ideal for getting a first impression - https://vrm.victronenergy.com/landingpage Safety note: Only have this complete system installed and commissioned by a qualified electrician.
Variants from €16,173.02*
€0.00*
€0.00**
Extremely versatile complete package The Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. As well a...
The Growatt Connection cable effortlessly connects your Growatt neo 800m-x inverter to a conventional earthed socket.The cable is equipped with a BC05A plug on the inverter side and a Schuko plug on the socket side. This cable is used to connect the micro inverter to your domestic power supply.Ready for immediate use as delivered as plug and playfor flexible installation of the neo 800m-x inverter in your homeTechnical featuresManufacturer part number: Power Cord 018.0728800Cable length: 5mUsage: Connection of the neo 800m-x Microinverter to the domestic power supply via a Schuko socket outletPlug connector on the socket outlet side: Schuko plugConnector on the inverter side: BC05A plugCompatible micro inverterGrowatt neo 800m-x micro inverterScope of delivery:1x Growatt Power Cord AC cable
€17.18*
€14.44**
The Growatt Connection cable effortlessly connects your Growatt neo 800m-x inverter to a conventional earthed socket.The cable is equipped with a BC05...
The Growatt Connection cable effortlessly connects your Growatt neo 800m-x inverter to a conventional earthed socket.The cable is equipped with a BC05A plug on the inverter side and a Schuko plug on the socket side. This cable is used to connect the micro inverter to your domestic power supply.Ready for immediate use as delivered as plug and playfor flexible installation of the neo 800m-x inverter in your homeTechnical featuresManufacturer part number: Power Cord 018.0728800Cable length: 5mUsage: Connection of the neo 800m-x Microinverter to the domestic power supply via a Schuko socket outletPlug connector on the socket outlet side: Schuko plugConnector on the inverter side: BC05A plugCompatible micro inverterGrowatt neo 800m-x micro inverterScope of delivery:1x Growatt Power Cord AC cable
The Growatt Battery Cable Set is required to connect Growatt ark2.5h-a1 batteries to min or MOD-XH series inverters.Content2x 2m power cable (plus/minus)2m communication cable2m grounding cableark high voltage battery systemGrowatt's ark battery system offers high flexibility through its expandable configuration options, ranging from 2.56 kWh up to 25.6 kWh. Installation and expansion of the system is simple and straightforward due to its modular design and use of cables. Another innovation of the ark system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand.Scope of delivery:1x Growatt battery connection cable set to min and MOD-XH inverters
€44.68*
€37.55**
The Growatt Battery Cable Set is required to connect Growatt ark2.5h-a1 batteries to min or MOD-XH series inverters.Content2x 2m power cable (plus/min...
The Growatt Battery Cable Set is required to connect Growatt ark2.5h-a1 batteries to min or MOD-XH series inverters.Content2x 2m power cable (plus/minus)2m communication cable2m grounding cableark high voltage battery systemGrowatt's ark battery system offers high flexibility through its expandable configuration options, ranging from 2.56 kWh up to 25.6 kWh. Installation and expansion of the system is simple and straightforward due to its modular design and use of cables. Another innovation of the ark system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand.Scope of delivery:1x Growatt battery connection cable set to min and MOD-XH inverters
The Growatt Battery Cable Set is required to connect Growatt ark2.5h-a1 batteries to three-phase sph or SPA series inverters.Contents2x 2m power cable (plus/minus)2m communication cableark high voltage battery systemGrowatt's ark battery system offers high flexibility through its expandable configuration options, ranging from 2.56 kWh up to 25.6 kWh. Installation and expansion of the system is simple and straightforward due to its modular design and use of cables. Another innovation of the ark system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand.Scope of delivery:1x ark-2.5H-A1 connection cable set to sph and SPA inverters
€44.68*
€37.55**
The Growatt Battery Cable Set is required to connect Growatt ark2.5h-a1 batteries to three-phase sph or SPA series inverters.Contents2x 2m power cable...
The Growatt Battery Cable Set is required to connect Growatt ark2.5h-a1 batteries to three-phase sph or SPA series inverters.Contents2x 2m power cable (plus/minus)2m communication cableark high voltage battery systemGrowatt's ark battery system offers high flexibility through its expandable configuration options, ranging from 2.56 kWh up to 25.6 kWh. Installation and expansion of the system is simple and straightforward due to its modular design and use of cables. Another innovation of the ark system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand.Scope of delivery:1x ark-2.5H-A1 connection cable set to sph and SPA inverters
The Growatt ark Battery Base is suitable for floor installation of Growatt ark battery modules and provides a secure stand for the battery tower. The Growatt ark system is modular, meaning that multiple batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules, as well as the associated bms, can be stacked on one base.ark battery basefor base mounting of Growatt ark hv and xh batteriesone base per battery towerWeight: 3kgThe ark battery systemThe Growatt ark battery system is modular. Additional batteries can be stacked on top of each other. The ark-2.5L-A1 has a capacity of 2.56 kWh and a maximum (discharge) current of 25a. The rated voltage is 51.2 v and the operating voltage is between 47.2 v and 56.8 v. The lithium iron phosphate (lfp) battery is free of cobalt, for example, resulting in a lower cost battery. The battery has a service life of over 6000 cycles.Scope of delivery:1x Growatt ark battery base
€42.97*
€36.11**
The Growatt ark Battery Base is suitable for floor installation of Growatt ark battery modules and provides a secure stand for the battery tower. The ...
The Growatt ark Battery Base is suitable for floor installation of Growatt ark battery modules and provides a secure stand for the battery tower. The Growatt ark system is modular, meaning that multiple batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules, as well as the associated bms, can be stacked on one base.ark battery basefor base mounting of Growatt ark hv and xh batteriesone base per battery towerWeight: 3kgThe ark battery systemThe Growatt ark battery system is modular. Additional batteries can be stacked on top of each other. The ark-2.5L-A1 has a capacity of 2.56 kWh and a maximum (discharge) current of 25a. The rated voltage is 51.2 v and the operating voltage is between 47.2 v and 56.8 v. The lithium iron phosphate (lfp) battery is free of cobalt, for example, resulting in a lower cost battery. The battery has a service life of over 6000 cycles.Scope of delivery:1x Growatt ark battery base
Die SYN 50-XH-30 von Growatt ist eine Back-Up Box, die für das Haus als Notersatzstromversorgung agiert. Sie ist in der Lage, im Falle eines Stromausfalls, bis zu 10kW aus dem Solarspeicher zur Verfügung zu stellen. Hierbei beträgt die Umschaltzeit 0,5 Sekunden. Die Back-Up Box zeichnet sich durch ein anwenderfreundliches Design aus, was eine unkomplizierte Installation und Bedienung ermöglicht.
Die SYN Back-Up Box
Ersatzstromversorgung für das gesamte Haus, bis zu 10 kW
100% 3-phasiger Asymmetrieausgang
Integrierter Schalter
Einfach zu installieren
Kombinationsmöglichkeiten mit der gesamten Growatt MOD-XH BP-Serie
Kompatibilität
Um einen Offgrid-Betrieb eines Growatt MOD-XH BP Wechselrichters zu erreichen, kann optional die SYN 50-XH-30 kombiniert werden. Folgende Hybrid-Wechselrichter sind dafür vorgesehen:
MOD 3KTL3-XH BP
MOD 4KTL3-XH BP
MOD 5KTL3-XH BP
MOD 6KTL3-XH BP
MOD 7KTL3-XH BP
MOD 8KTL3-XH BP
MOD 9KTL3-XH BP
MOD 10KTL3-XH BP
Die MOD-XH-BP Serie
2 unabhängige MPPTs
Battery-ready, zukunftssicher
Typ II SPD auf DC- und AC-Seite
Integrierte AFCI-Funktion
Unterstützung der Exportbegrenzung
OLED und Touch Taste
DC/AC-Verhältnis bis zu 2,0
Offgrid-Funktion mit optionalem Zubehör möglich
Hybrid-Wechselrichter
Im Gegensatz zu herkömmlichen Wechselrichtern können Hybrid-Wechselrichter den erzeugten Strom aus der Solaranlage nicht nur in das Stromnetz einspeisen, sondern auch in Batterien speichern. Dadurch wird der Solarstrom auch dann verfügbar, wenn die Sonne nicht scheint. Ein weiteres Merkmal von Hybrid-Wechselrichtern ist ihre Fähigkeit, den Stromverbrauch eines Haushalts zu optimieren, indem sie den Solarstrom bevorzugt direkt im Haushalt nutzen, bevor er ins Netz eingespeist wird.
Aktive Sicherheit mit AFCI-Funktion
Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen. Umgangssprachlich wird der AFCI auch Brandschutzschalter genannt, da durch eigehende Signale Überhitzungen an schlechten Kontaktstellen oder bei Überschlägen zwischen zwei Leitern, Brände verhindert werden können.
Das APX Batteriesystem
Alle oben genannten Wechselrichter sind mit dem APX-Batteriesystem kompatibel. Durch das modulare Konzept ist das APX-System flexibel einsetzbar und bei Bedarf erweiterbar. Ein Batterieturm kann mit mindestens einem bis maximal sechs APX 5.0P-B1 Batteriemodulen errichtet werden. Zum Betrieb wird pro Turm ein Leistungsmodul benötigt. Hierbei wird zwischen dem APX 98020-P1 oder dem APX 98034-P2 gewählt. Das BMS ist separat zu erwerben und für die Bodenmontage ist ein zusätzlicher Sockel erforderlich.
Flexibel Erweitern
Das APX Batteriesystem von Growatt zeigt hierbei seine flexiblen Konfigurationsmöglichkeiten. Diese sind von 5kWh bis zu 30kWh erweiterbar. Durch das einfache und modulare Design, gestaltet sich die Installation und Erweiterung sehr unkompliziert mit Hilfe von Kabeln. Ein weiterer Fortschritt des neuen Speichersystems besteht darin, dass im Gegensatz zu anderen Systemen, kein Batterieschrank mehr benötigt wird. Lediglich eine Batteriebasis wird für einen sicheren Stand benötigt. Die APX-Serie unterstützt das Kombinieren von gemischten Batterie-Packs aus neuen und alten Chargen, sowie unterschiedlichen Kapazitäten.
Technische Daten der Back-Up Box
Max. Überstromschutz AC-Eingang: 63 A
Max. Dauer-Einsatzstrom: 50 A
AC-Ausgangsspannung: 230 V/400 V
AC-Ausgangsspannungsbereich: 180-280 V
AC-Frequenz: 50/60 Hz
AC-Frequenzbereich: 45-65 Hz
AC-Nennleistung: 18 kW
Max. kontinuierlicher Eingangsstrom bei 230V: 26,1 A
AC-Spitzenleistung im Backup-Betrieb: 19,8k W
AC-Spitzenstrom im Backup-Betrieb: 28,7 A
Kommunikation: RS485
Betriebstemperaturbereich: -40°C - +60°C
Schutzart: IP65
Gewicht: 10,8 kg
Abmessungen: 365 x 450 x 123 mm
Lieferumfang:
1x Growatt SYN 50-XH-30 Back-Up Box
€608.64*
€511.46**
Die SYN 50-XH-30 von Growatt ist eine Back-Up Box, die für das Haus als Notersatzstromversorgung agiert. Sie ist in der Lage, im Falle eines...
Die SYN 50-XH-30 von Growatt ist eine Back-Up Box, die für das Haus als Notersatzstromversorgung agiert. Sie ist in der Lage, im Falle eines Stromausfalls, bis zu 10kW aus dem Solarspeicher zur Verfügung zu stellen. Hierbei beträgt die Umschaltzeit 0,5 Sekunden. Die Back-Up Box zeichnet sich durch ein anwenderfreundliches Design aus, was eine unkomplizierte Installation und Bedienung ermöglicht.
Die SYN Back-Up Box
Ersatzstromversorgung für das gesamte Haus, bis zu 10 kW
100% 3-phasiger Asymmetrieausgang
Integrierter Schalter
Einfach zu installieren
Kombinationsmöglichkeiten mit der gesamten Growatt MOD-XH BP-Serie
Kompatibilität
Um einen Offgrid-Betrieb eines Growatt MOD-XH BP Wechselrichters zu erreichen, kann optional die SYN 50-XH-30 kombiniert werden. Folgende Hybrid-Wechselrichter sind dafür vorgesehen:
MOD 3KTL3-XH BP
MOD 4KTL3-XH BP
MOD 5KTL3-XH BP
MOD 6KTL3-XH BP
MOD 7KTL3-XH BP
MOD 8KTL3-XH BP
MOD 9KTL3-XH BP
MOD 10KTL3-XH BP
Die MOD-XH-BP Serie
2 unabhängige MPPTs
Battery-ready, zukunftssicher
Typ II SPD auf DC- und AC-Seite
Integrierte AFCI-Funktion
Unterstützung der Exportbegrenzung
OLED und Touch Taste
DC/AC-Verhältnis bis zu 2,0
Offgrid-Funktion mit optionalem Zubehör möglich
Hybrid-Wechselrichter
Im Gegensatz zu herkömmlichen Wechselrichtern können Hybrid-Wechselrichter den erzeugten Strom aus der Solaranlage nicht nur in das Stromnetz einspeisen, sondern auch in Batterien speichern. Dadurch wird der Solarstrom auch dann verfügbar, wenn die Sonne nicht scheint. Ein weiteres Merkmal von Hybrid-Wechselrichtern ist ihre Fähigkeit, den Stromverbrauch eines Haushalts zu optimieren, indem sie den Solarstrom bevorzugt direkt im Haushalt nutzen, bevor er ins Netz eingespeist wird.
Aktive Sicherheit mit AFCI-Funktion
Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen. Umgangssprachlich wird der AFCI auch Brandschutzschalter genannt, da durch eigehende Signale Überhitzungen an schlechten Kontaktstellen oder bei Überschlägen zwischen zwei Leitern, Brände verhindert werden können.
Das APX Batteriesystem
Alle oben genannten Wechselrichter sind mit dem APX-Batteriesystem kompatibel. Durch das modulare Konzept ist das APX-System flexibel einsetzbar und bei Bedarf erweiterbar. Ein Batterieturm kann mit mindestens einem bis maximal sechs APX 5.0P-B1 Batteriemodulen errichtet werden. Zum Betrieb wird pro Turm ein Leistungsmodul benötigt. Hierbei wird zwischen dem APX 98020-P1 oder dem APX 98034-P2 gewählt. Das BMS ist separat zu erwerben und für die Bodenmontage ist ein zusätzlicher Sockel erforderlich.
Flexibel Erweitern
Das APX Batteriesystem von Growatt zeigt hierbei seine flexiblen Konfigurationsmöglichkeiten. Diese sind von 5kWh bis zu 30kWh erweiterbar. Durch das einfache und modulare Design, gestaltet sich die Installation und Erweiterung sehr unkompliziert mit Hilfe von Kabeln. Ein weiterer Fortschritt des neuen Speichersystems besteht darin, dass im Gegensatz zu anderen Systemen, kein Batterieschrank mehr benötigt wird. Lediglich eine Batteriebasis wird für einen sicheren Stand benötigt. Die APX-Serie unterstützt das Kombinieren von gemischten Batterie-Packs aus neuen und alten Chargen, sowie unterschiedlichen Kapazitäten.
Technische Daten der Back-Up Box
Max. Überstromschutz AC-Eingang: 63 A
Max. Dauer-Einsatzstrom: 50 A
AC-Ausgangsspannung: 230 V/400 V
AC-Ausgangsspannungsbereich: 180-280 V
AC-Frequenz: 50/60 Hz
AC-Frequenzbereich: 45-65 Hz
AC-Nennleistung: 18 kW
Max. kontinuierlicher Eingangsstrom bei 230V: 26,1 A
AC-Spitzenleistung im Backup-Betrieb: 19,8k W
AC-Spitzenstrom im Backup-Betrieb: 28,7 A
Kommunikation: RS485
Betriebstemperaturbereich: -40°C - +60°C
Schutzart: IP65
Gewicht: 10,8 kg
Abmessungen: 365 x 450 x 123 mm
Lieferumfang:
1x Growatt SYN 50-XH-30 Back-Up Box
Die SYN 100-XH-30 von Growatt stellt eine zuverlässige Back-Up Lösung für dein zu Hause dar, um im Falle eines Stromausfalls eine kontinuierliche Stromversorgung sicherzustellen. Diese innovative Box kann beeindruckende 40kW aus dem Solarspeicher liefern und bietet dabei eine sehr schnelle Umschaltzeit von nur 0,5 Sekunde. Darüber hinaus überzeugt sie durch ihr benutzerfreundliches Design, welches eines mühelose Installation und Nutzung gewährleistet.
Die SYN Back-Up Box
Ersatzstromversorgung für das gesamte Haus, bis zu 40 kW
100% 3-phasiger Asymmetrieausgang
Integrierter Schalter
Einfach zu installieren
Kombinationsmöglichkeiten mit der gesamten Growatt MID-XH - Serie
Kompatibilität
Um einen Offgrid-Betrieb eines Growatt MID-XH Wechselrichters zu erreichen, kann optional die SYN 100-XH-30 kombiniert werden. Folgende Hybrid-Wechselrichter sind dafür vorgesehen:
MID 11KTL3-XH
MID 12KTL3-XH
MID 13KTL3-XH
MID 15KTL3-XH
MID 17KTL3-XH
MID 20KTL3-XH
MID 25KTL3-XH
MID 30KTL3-XH
Die MID-XH Serie:
2 unabhängige MPPTs
Battery-ready, zukunftssicher
Typ II SPD auf DC- und AC-Seite
Integrierte AFCI-Funktion
OLED, LED und Touch Taste
DC/AC-Verhältnis bis zu 2,0
24h Eigenverbrauchs-Monitoring
10 Jahre Herstellergarantie
Das APX Batteriesystem
Alle oben genannten Wechselrichter sind mit dem APX-Batteriesystem kompatibel. Durch das modulare Konzept ist das APX-System flexibel einsetzbar und bei Bedarf erweiterbar. Ein Batterieturm kann mit mindestens einem bis maximal sechs APX 5.0P-B1 Batteriemodulen errichtet werden. Zum Betrieb wird pro Turm ein Leistungsmodul benötigt. Hierbei wird zwischen dem APX 98020-P1 oder dem APX 98034-P2 gewählt. Das BMS ist separat zu erwerben und für die Bodenmontage ist ein zusätzlicher Sockel erforderlich.
Flexibel Erweitern
Das APX Batteriesystem von Growatt zeigt hierbei seine flexiblen Konfigurationsmöglichkeiten. Diese sind von 5kWh bis zu 30kWh erweiterbar. Durch das einfache und modulare Design, gestaltet sich die Installation und Erweiterung sehr unkompliziert mit Hilfe von Kabeln. Ein weiterer Fortschritt des neuen Speichersystems besteht darin, dass im Gegensatz zu anderen Systemen, kein Batterieschrank mehr benötigt wird. Lediglich eine Batteriebasis wird für einen sicheren Stand benötigt. Die APX-Serie unterstützt das Kombinieren von gemischten Batterie-Packs aus neuen und alten Chargen, sowie unterschiedlichen Kapazitäten.
Technische Daten der Back-Up Box
Max. Überstromschutz AC-Eingang: 125 A
Max. Dauer-Einsatzstrom: 90 A
AC-Ausgangsspannung: 230 V/400 V (340-440V)
AC-Frequenz: 50/60 Hz
AC-Frequenzbereich: 45-65 Hz
AC-Nennleistung: 40 kW
Max. kontinuierlicher Eingangsstrom bei 230V: 58 A
AC-Spitzenleistung im Backup-Betrieb: 44 kW
AC-Spitzenstrom im Backup-Betrieb: 63 A
Kommunikation: RS485
Betriebstemperaturbereich: -40°C - +60°C
Schutzart: IP65
Gewicht: 12 kg
Abmessungen: 365 x 450 x 123 mm
Lieferumfang:
1x Growatt SYN 100-XH-30 Back-Up Box
€797.69*
€670.33**
Die SYN 100-XH-30 von Growatt stellt eine zuverlässige Back-Up Lösung für dein zu Hause dar, um im Falle eines Stromausfalls eine konti...
Die SYN 100-XH-30 von Growatt stellt eine zuverlässige Back-Up Lösung für dein zu Hause dar, um im Falle eines Stromausfalls eine kontinuierliche Stromversorgung sicherzustellen. Diese innovative Box kann beeindruckende 40kW aus dem Solarspeicher liefern und bietet dabei eine sehr schnelle Umschaltzeit von nur 0,5 Sekunde. Darüber hinaus überzeugt sie durch ihr benutzerfreundliches Design, welches eines mühelose Installation und Nutzung gewährleistet.
Die SYN Back-Up Box
Ersatzstromversorgung für das gesamte Haus, bis zu 40 kW
100% 3-phasiger Asymmetrieausgang
Integrierter Schalter
Einfach zu installieren
Kombinationsmöglichkeiten mit der gesamten Growatt MID-XH - Serie
Kompatibilität
Um einen Offgrid-Betrieb eines Growatt MID-XH Wechselrichters zu erreichen, kann optional die SYN 100-XH-30 kombiniert werden. Folgende Hybrid-Wechselrichter sind dafür vorgesehen:
MID 11KTL3-XH
MID 12KTL3-XH
MID 13KTL3-XH
MID 15KTL3-XH
MID 17KTL3-XH
MID 20KTL3-XH
MID 25KTL3-XH
MID 30KTL3-XH
Die MID-XH Serie:
2 unabhängige MPPTs
Battery-ready, zukunftssicher
Typ II SPD auf DC- und AC-Seite
Integrierte AFCI-Funktion
OLED, LED und Touch Taste
DC/AC-Verhältnis bis zu 2,0
24h Eigenverbrauchs-Monitoring
10 Jahre Herstellergarantie
Das APX Batteriesystem
Alle oben genannten Wechselrichter sind mit dem APX-Batteriesystem kompatibel. Durch das modulare Konzept ist das APX-System flexibel einsetzbar und bei Bedarf erweiterbar. Ein Batterieturm kann mit mindestens einem bis maximal sechs APX 5.0P-B1 Batteriemodulen errichtet werden. Zum Betrieb wird pro Turm ein Leistungsmodul benötigt. Hierbei wird zwischen dem APX 98020-P1 oder dem APX 98034-P2 gewählt. Das BMS ist separat zu erwerben und für die Bodenmontage ist ein zusätzlicher Sockel erforderlich.
Flexibel Erweitern
Das APX Batteriesystem von Growatt zeigt hierbei seine flexiblen Konfigurationsmöglichkeiten. Diese sind von 5kWh bis zu 30kWh erweiterbar. Durch das einfache und modulare Design, gestaltet sich die Installation und Erweiterung sehr unkompliziert mit Hilfe von Kabeln. Ein weiterer Fortschritt des neuen Speichersystems besteht darin, dass im Gegensatz zu anderen Systemen, kein Batterieschrank mehr benötigt wird. Lediglich eine Batteriebasis wird für einen sicheren Stand benötigt. Die APX-Serie unterstützt das Kombinieren von gemischten Batterie-Packs aus neuen und alten Chargen, sowie unterschiedlichen Kapazitäten.
Technische Daten der Back-Up Box
Max. Überstromschutz AC-Eingang: 125 A
Max. Dauer-Einsatzstrom: 90 A
AC-Ausgangsspannung: 230 V/400 V (340-440V)
AC-Frequenz: 50/60 Hz
AC-Frequenzbereich: 45-65 Hz
AC-Nennleistung: 40 kW
Max. kontinuierlicher Eingangsstrom bei 230V: 58 A
AC-Spitzenleistung im Backup-Betrieb: 44 kW
AC-Spitzenstrom im Backup-Betrieb: 63 A
Kommunikation: RS485
Betriebstemperaturbereich: -40°C - +60°C
Schutzart: IP65
Gewicht: 12 kg
Abmessungen: 365 x 450 x 123 mm
Lieferumfang:
1x Growatt SYN 100-XH-30 Back-Up Box
Die Growatt APX Battery Base ist für die Bodeninstallation von Growatt APX-Batteriemodulen und dem dazugehörigen BMS geeignet. Sie sorgt für einen sicheren Stand des Batterieturms. Das Growatt APX-System ist modular aufgebaut, d.h. es können mehrere Batterien kombiniert werden, wobei die Growatt Base als Grundlage dient. Auf einer Basis können bis zu 10 Speichermodule, sowie das zugehörige BMS gestapelt werden.
APX Batterie-Basis
für die Bodenmontage von Growatt APX-Batterien und zugehörigem BMS
je Batterieturm eine Basis
Abmessungen: 690 x 185 x 50 mm
Das APX-Batteriesystem
Das Growatt APX Batteriesystem ist modular aufgebaut. Zusätzliche Batterien können übereinander gestapelt werden. Die APX 5.0P-B1 hat eine Kapazität von 5kWh und das BMS einen maximalen (Entlade-) Strom von 13A, bzw. 26A. Daraus ergibt sich, dass eine Kapazität von 5-30 kWh erreicht und ausgewählt werden kann. Die Nennspannung pro Batteriemodul beträgt 385 V und der Betriebsspannungsbereich liegt zwischen 330-450V. Die Lithiumeisenphosphatbatterie (LFP) ist frei von Kobalt, was beispielsweise zu einer kostengünstigeren Batterie führt.
Lieferumfang:
1x Growatt APX Batterie-Basis
€101.61*
€85.39**
Die Growatt APX Battery Base ist für die Bodeninstallation von Growatt APX-Batteriemodulen und dem dazugehörigen BMS geeignet. Sie sorgt f&u...
Die Growatt APX Battery Base ist für die Bodeninstallation von Growatt APX-Batteriemodulen und dem dazugehörigen BMS geeignet. Sie sorgt für einen sicheren Stand des Batterieturms. Das Growatt APX-System ist modular aufgebaut, d.h. es können mehrere Batterien kombiniert werden, wobei die Growatt Base als Grundlage dient. Auf einer Basis können bis zu 10 Speichermodule, sowie das zugehörige BMS gestapelt werden.
APX Batterie-Basis
für die Bodenmontage von Growatt APX-Batterien und zugehörigem BMS
je Batterieturm eine Basis
Abmessungen: 690 x 185 x 50 mm
Das APX-Batteriesystem
Das Growatt APX Batteriesystem ist modular aufgebaut. Zusätzliche Batterien können übereinander gestapelt werden. Die APX 5.0P-B1 hat eine Kapazität von 5kWh und das BMS einen maximalen (Entlade-) Strom von 13A, bzw. 26A. Daraus ergibt sich, dass eine Kapazität von 5-30 kWh erreicht und ausgewählt werden kann. Die Nennspannung pro Batteriemodul beträgt 385 V und der Betriebsspannungsbereich liegt zwischen 330-450V. Die Lithiumeisenphosphatbatterie (LFP) ist frei von Kobalt, was beispielsweise zu einer kostengünstigeren Batterie führt.
Lieferumfang:
1x Growatt APX Batterie-Basis
Das Growatt BDC 95045-A1 BMS fungiert als zentrale Überwachungs- und Steuereinheit innerhalb des ARK Hochvolt-Batteriesystems und unterstützt die Kommunikation mit den Growatt MIN- und MOD-XH-Invertern. Es ermöglicht die Verbindung von bis zu 10 Batteriemodulen mit einer individuellen Kapazität von 2,56 kWh. Diese Module können in Serie geschaltet werden, um einen Batterieturm zu bilden, der eine Gesamtkapazität von bis zu 25,64 kWh aufweist. Es können auch Speichertürme miteinander verbunden werden, pro Turm wird dabei ein BMS benötigt.
Über das BDC 95045-A1 BMS
Kompatibel mit Growatt MIN-XH und MOD-XH Invertern
Modulares, stapelbares Batteriekonzept
Überwachung und Steuerung
BMS Steuerungsparameter
Zu den Steuerparametern gehören der Ladezustand (SOC), die Netzspannung, der Strom, die Zellspannung, die Zelltemperatur und die PCBA-Temperaturmessung. Durch die präzise Überwachung dieser Parameter gewährleistet das BMS eine optimale Leistung und Langlebigkeit der Batterie.
Flexibel Erweitern
Das ARK Batteriesystem von Growatt bietet eine hohe Flexibilität durch seine erweiterbaren Konfigurationsmöglichkeiten, die von 2,56 kWh bis zu 25,6 kWh reichen. Die Installation und Erweiterung des Systems gestaltet sich einfach und unkompliziert durch das modulare Design und die Verwendung von Kabeln. Eine weitere Innovation des ARK Systems ist, dass im Gegensatz zu anderen Batteriesystemen kein Batterieschrank benötigt wird. Lediglich eine Batteriebasis ist für einen stabilen Stand erforderlich.
Technische Daten:
Schutzart: IP65
Temperaturbereich: -10~50° C
Abmessung: 650 x 260 x 185 mm
Kommunikation: CAN
Gewicht: 8 kg
10 Jahre Herstellergarantie
Lieferumfang:
1x Growatt BDC 95045-A1 Steuerungseinheit BMS
€838.94*
€704.99**
Das Growatt BDC 95045-A1 BMS fungiert als zentrale Überwachungs- und Steuereinheit innerhalb des ARK Hochvolt-Batteriesystems und unterstütz...
Das Growatt BDC 95045-A1 BMS fungiert als zentrale Überwachungs- und Steuereinheit innerhalb des ARK Hochvolt-Batteriesystems und unterstützt die Kommunikation mit den Growatt MIN- und MOD-XH-Invertern. Es ermöglicht die Verbindung von bis zu 10 Batteriemodulen mit einer individuellen Kapazität von 2,56 kWh. Diese Module können in Serie geschaltet werden, um einen Batterieturm zu bilden, der eine Gesamtkapazität von bis zu 25,64 kWh aufweist. Es können auch Speichertürme miteinander verbunden werden, pro Turm wird dabei ein BMS benötigt.
Über das BDC 95045-A1 BMS
Kompatibel mit Growatt MIN-XH und MOD-XH Invertern
Modulares, stapelbares Batteriekonzept
Überwachung und Steuerung
BMS Steuerungsparameter
Zu den Steuerparametern gehören der Ladezustand (SOC), die Netzspannung, der Strom, die Zellspannung, die Zelltemperatur und die PCBA-Temperaturmessung. Durch die präzise Überwachung dieser Parameter gewährleistet das BMS eine optimale Leistung und Langlebigkeit der Batterie.
Flexibel Erweitern
Das ARK Batteriesystem von Growatt bietet eine hohe Flexibilität durch seine erweiterbaren Konfigurationsmöglichkeiten, die von 2,56 kWh bis zu 25,6 kWh reichen. Die Installation und Erweiterung des Systems gestaltet sich einfach und unkompliziert durch das modulare Design und die Verwendung von Kabeln. Eine weitere Innovation des ARK Systems ist, dass im Gegensatz zu anderen Batteriesystemen kein Batterieschrank benötigt wird. Lediglich eine Batteriebasis ist für einen stabilen Stand erforderlich.
Technische Daten:
Schutzart: IP65
Temperaturbereich: -10~50° C
Abmessung: 650 x 260 x 185 mm
Kommunikation: CAN
Gewicht: 8 kg
10 Jahre Herstellergarantie
Lieferumfang:
1x Growatt BDC 95045-A1 Steuerungseinheit BMS
Der Growatt ShineWiFi-X Datenlogger (MPN: ShineWiFi-X) stattet einen Growatt-Wechselrichter mit WiFi aus, sodass man mittels Online Monitoring Daten übermitteln und einsehen kann. Dafür werden Speicherdaten über einem Monat hinweg festgehalten. Bei kabelloser Kommunikation spielt der Datenschutz eine große Rolle, sodass diese Informationen verschlüsselt werden können. Die Growatt-Server sind in Frankfurt stationiert.
Der Shine WiFi-X im Überblick
LED-Anzeige
USB-Kommunikationsschnittstelle
App Konfiguration
Online Monitoring und Wartung
Eingebauter Speicher
Kabelfreie und einfache Installation
Growatt Überwachungsplattform
Mit dem Shine WiFi-X Datenlogger kann die Growatt Monitoring-Plattform genutzt werden. Diese ist als Smartphone-App (für iOS und Android), als auch in einer Webversion verfügbar. Die Nutzung der Plattform ist kostenfrei. Über Shine können alle Growatt-Produkte, die in Besitz sind, konfiguriert und überwacht werden. Die Anzeige des Eigenverbrauchs und Trends ist ebenfalls möglich.
Kompatible Wechselrichter-Serien:
MIC 600-3300TL-X
MIN 2500-4600TL-X/XH/XA
MOD 3-15KTL3-X/XH
MID 17-22KTL3-X/XH
MID 25-40KTL3-X
MAX 50-80KTL3 LV
MAX 100-125KTL3 LV
SPH 3000-6000TL BL-UP
SPH 4000-10000TL3 BH-UP
SPA 4000-10000TL3 BH-UP
Technische Daten
Drahtloser Standard: 802,11 b/g/n
Wireless Frequenzbereich: 2,4~2,5GHz
Abmessungen: 135 x 79 x 29 mm
Gewicht: 60 g
Schutzklasse: IP65
Arbeitstemperaturbereich: -20°C - +65°C
Lieferumfang:
1x Growatt Shine WiFi-X Datenlogger
€17.18*
€14.44**
Der Growatt ShineWiFi-X Datenlogger (MPN: ShineWiFi-X) stattet einen Growatt-Wechselrichter mit WiFi aus, sodass man mittels Online Monitoring Da...
Der Growatt ShineWiFi-X Datenlogger (MPN: ShineWiFi-X) stattet einen Growatt-Wechselrichter mit WiFi aus, sodass man mittels Online Monitoring Daten übermitteln und einsehen kann. Dafür werden Speicherdaten über einem Monat hinweg festgehalten. Bei kabelloser Kommunikation spielt der Datenschutz eine große Rolle, sodass diese Informationen verschlüsselt werden können. Die Growatt-Server sind in Frankfurt stationiert.
Der Shine WiFi-X im Überblick
LED-Anzeige
USB-Kommunikationsschnittstelle
App Konfiguration
Online Monitoring und Wartung
Eingebauter Speicher
Kabelfreie und einfache Installation
Growatt Überwachungsplattform
Mit dem Shine WiFi-X Datenlogger kann die Growatt Monitoring-Plattform genutzt werden. Diese ist als Smartphone-App (für iOS und Android), als auch in einer Webversion verfügbar. Die Nutzung der Plattform ist kostenfrei. Über Shine können alle Growatt-Produkte, die in Besitz sind, konfiguriert und überwacht werden. Die Anzeige des Eigenverbrauchs und Trends ist ebenfalls möglich.
Kompatible Wechselrichter-Serien:
MIC 600-3300TL-X
MIN 2500-4600TL-X/XH/XA
MOD 3-15KTL3-X/XH
MID 17-22KTL3-X/XH
MID 25-40KTL3-X
MAX 50-80KTL3 LV
MAX 100-125KTL3 LV
SPH 3000-6000TL BL-UP
SPH 4000-10000TL3 BH-UP
SPA 4000-10000TL3 BH-UP
Technische Daten
Drahtloser Standard: 802,11 b/g/n
Wireless Frequenzbereich: 2,4~2,5GHz
Abmessungen: 135 x 79 x 29 mm
Gewicht: 60 g
Schutzklasse: IP65
Arbeitstemperaturbereich: -20°C - +65°C
Lieferumfang:
1x Growatt Shine WiFi-X Datenlogger
The Growatt ShineLink-X data logger (MPN: ShineLink-X) serves a Growatt inverter for online monitoring and maintenance. For this purpose, memory data is recorded over a month. With wireless communication, data protection plays a major role, so this information can be encrypted. The Growatt servers are based in Frankfurt.The ShineLink-X at a glanceMonitoring of up to 8 invertersRatio frequency communication120m rangePlug and PlayAutomatic IP addressingEncrypted dataBuilt-in memory for one monthCable-free, easy installationGrowatt Shine monitoring platformWith the ShineLink-X, you can use the Growatt monitoring platform. This is available as a smartphone app (for iOS and Android), as well as a web version. Use of the platform is free of charge. Through Shine, all Growatt owned products can be configured and monitored. Display of self-consumption and trends is also possible.Compatible inverter series:MIC 600-3300TL-XMIN 2500-4600TL-X/XH/XAMOD 3-15KTL3-X/XHMID 17-22KTL3-X/XHMID 25-40KTL3-XMAX 50-80ktl3 LVMAX 100-125ktl3 LVSPH 3000-6000tl BL-UPSPH 4000-10000tl3 BH-UPSPA 4000-10000tl3 BH-UPTechnical data:Communication: Rf433 - up to 120m (under free field conditions)Input voltage AC power supply: 196-250VDimensions: 105 x 85 x 26 mmWeight: 1kgMounting: table or wall mounting possibleProtection class: IP30Status indicator: LEDOperating temperature range: -20°C - +65°CManufacturer warranty: 1 yearScope of delivery:1x ShineLan Box1x ShineRF Stick-X1x network cable
€25.78*
€21.66**
The Growatt ShineLink-X data logger (MPN: ShineLink-X) serves a Growatt inverter for online monitoring and maintenance. For this purpose, memory data ...
The Growatt ShineLink-X data logger (MPN: ShineLink-X) serves a Growatt inverter for online monitoring and maintenance. For this purpose, memory data is recorded over a month. With wireless communication, data protection plays a major role, so this information can be encrypted. The Growatt servers are based in Frankfurt.The ShineLink-X at a glanceMonitoring of up to 8 invertersRatio frequency communication120m rangePlug and PlayAutomatic IP addressingEncrypted dataBuilt-in memory for one monthCable-free, easy installationGrowatt Shine monitoring platformWith the ShineLink-X, you can use the Growatt monitoring platform. This is available as a smartphone app (for iOS and Android), as well as a web version. Use of the platform is free of charge. Through Shine, all Growatt owned products can be configured and monitored. Display of self-consumption and trends is also possible.Compatible inverter series:MIC 600-3300TL-XMIN 2500-4600TL-X/XH/XAMOD 3-15KTL3-X/XHMID 17-22KTL3-X/XHMID 25-40KTL3-XMAX 50-80ktl3 LVMAX 100-125ktl3 LVSPH 3000-6000tl BL-UPSPH 4000-10000tl3 BH-UPSPA 4000-10000tl3 BH-UPTechnical data:Communication: Rf433 - up to 120m (under free field conditions)Input voltage AC power supply: 196-250VDimensions: 105 x 85 x 26 mmWeight: 1kgMounting: table or wall mounting possibleProtection class: IP30Status indicator: LEDOperating temperature range: -20°C - +65°CManufacturer warranty: 1 yearScope of delivery:1x ShineLan Box1x ShineRF Stick-X1x network cable
The Growatt hvc-60050-a1 bms is a central monitoring and control unit that is part of the ark hv high voltage battery system and supports communication with Growatt spa and sph inverters. Up to 10 battery modules, each with a capacity of 2.56 kWh, can be connected to this bms. These modules can be connected in series to form a battery tower that provides a total capacity of up to 25.64 kWh. Storage towers can also be interconnected, requiring one bms per tower.About the hvC 60050-a1 bmsCompatible with Growatt spa and sph invertersModular, stackable battery designMonitoring and controlbms control parametersControl parameters include state of charge (soc), line voltage, current, cell voltage, cell temperature and PCBA temperature measurement. By precisely monitoring these parameters, the bms ensures optimal battery performance and longevity.Flexible expansionGrowatt's ark battery system offers great flexibility through its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward due to its modular design and use of cables. Another innovation of the ark system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand.Technical data:Input/output voltage range: 90~585VRated current: 25AProtection class: IP65Temperature range: -10~50° CDimension: 650 x 260 x 185 mmCommunication: CANWeight: 8,5 kgScope of delivery:1x Growatt hvC 60050-a1 control unit bms1x connection cable set to battery1x quick installation guide
€804.57*
€676.11**
The Growatt hvc-60050-a1 bms is a central monitoring and control unit that is part of the ark hv high voltage battery system and supports communicatio...
The Growatt hvc-60050-a1 bms is a central monitoring and control unit that is part of the ark hv high voltage battery system and supports communication with Growatt spa and sph inverters. Up to 10 battery modules, each with a capacity of 2.56 kWh, can be connected to this bms. These modules can be connected in series to form a battery tower that provides a total capacity of up to 25.64 kWh. Storage towers can also be interconnected, requiring one bms per tower.About the hvC 60050-a1 bmsCompatible with Growatt spa and sph invertersModular, stackable battery designMonitoring and controlbms control parametersControl parameters include state of charge (soc), line voltage, current, cell voltage, cell temperature and PCBA temperature measurement. By precisely monitoring these parameters, the bms ensures optimal battery performance and longevity.Flexible expansionGrowatt's ark battery system offers great flexibility through its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward due to its modular design and use of cables. Another innovation of the ark system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand.Technical data:Input/output voltage range: 90~585VRated current: 25AProtection class: IP65Temperature range: -10~50° CDimension: 650 x 260 x 185 mmCommunication: CANWeight: 8,5 kgScope of delivery:1x Growatt hvC 60050-a1 control unit bms1x connection cable set to battery1x quick installation guide
Der Growatt ATS-S ist ein 1-phasiger Transferschalter und kontrolliert sowohl bei Anbindung ans Stromnetz, als auch im Inselbetrieb den Wechsel der Schaltvorrichtung, um der EPS-Belastung Strom zu geben. Er wird mit Growatt-Wechselrichtern der Serien SPH und SPA in Einsatz gebracht. Der ATS-S kann im Falle eines Stromausfalls automatisch auf Inselbetrieb switchen und somit alles weitere mit Strom versorgen, um einen reibungslosen Betrieb zu garantieren. Um Überhitzungen zu vermeiden, kommt sein natürliches Kühlungskonzept zum Einsatz.
Technische Daten
Spannung: 230 V
Frequenz: 50/60 Hz
Max. Strom: 30 A
Schutzart: IP65
Betriebstemperatur: -25°C - +50°C
Gewicht: 2,38 kg
Abmessungen: 250 x 200 x 86 mm
Lieferumfang:
1x Growatt ATS-S 1-phasiger Transferschalter
€178.95*
Der Growatt ATS-S ist ein 1-phasiger Transferschalter und kontrolliert sowohl bei Anbindung ans Stromnetz, als auch im Inselbetrieb den Wech...
Der Growatt ATS-S ist ein 1-phasiger Transferschalter und kontrolliert sowohl bei Anbindung ans Stromnetz, als auch im Inselbetrieb den Wechsel der Schaltvorrichtung, um der EPS-Belastung Strom zu geben. Er wird mit Growatt-Wechselrichtern der Serien SPH und SPA in Einsatz gebracht. Der ATS-S kann im Falle eines Stromausfalls automatisch auf Inselbetrieb switchen und somit alles weitere mit Strom versorgen, um einen reibungslosen Betrieb zu garantieren. Um Überhitzungen zu vermeiden, kommt sein natürliches Kühlungskonzept zum Einsatz.
Technische Daten
Spannung: 230 V
Frequenz: 50/60 Hz
Max. Strom: 30 A
Schutzart: IP65
Betriebstemperatur: -25°C - +50°C
Gewicht: 2,38 kg
Abmessungen: 250 x 200 x 86 mm
Lieferumfang:
1x Growatt ATS-S 1-phasiger Transferschalter
Der Smart Energy Manager (SME-E 50kW) von Growatt wurde für die intelligente Überwachung des Eigenverbrauchs und die Begrenzung des Exports von Solar- und Speichersystemen konzipiert. Zudem besitzt er die Möglichkeit flexible Stromwandler (CT`s) für verschiedene Systemgrößen mit hoher Regelgenauigkeit bereitzustellen. Durch seine Failsafe-Funktion gewährleistet er zusätzlich die Sicherheit und Zuverlässigkeit des Systems.
Eigenschaften
Intelligente Verwaltung
24h Überwachung des Eigenverbrauchs
Online Monitoring
Einspeisebegrenzungen
Ausfallsicher und hohe Regelgenauigkeit
Flexible CT`s für unterschiedliche Projektgrößen
Nutzbar für 380V und 480V Dreiphasen-Netzen
Max. Wechselrichter-Anzahl: 10
RS485- und Ethernet-Anschluss
Bestandteile vom Smart Energiemanager
ShineMaster: Ist der Steuerkern und dient als Datenkommunikation mit dem Wechselrichter und dem Stromzähler. Er realisiert die Funktion der Wechselrichterleistungsregelung und die Fernüberwachung.
Stromzähler: Er zeigt die Spannung, den Strom und die Funktionsparameter in Echtzeitüberwachung an.
Stromversorgung: Versorgung für den ShineMaster.
Schutzschalter: Steuert den Start und die Abschaltung des Stromzählers und der Stromversorgung.
Anschlussklemme: Hier wird die Verkabelung vorgenommen.
Der Smarte Energiemanager unterstützt sowohl netzgekoppelte, als auch Hybrid-/AC-gekoppelte Wechselrichter und arbeitet wie folgt: Der Wechselrichter wandelt den von der Sonne erzeugten Gleichstrom in den photovoltaischen String in Wechselstrom um. Die vom Wechselrichter erzeugte Energie kann für die benutzerlast, die Batterieladung oder die Einspeisung in netz verwendet werden. Der Smarte Energiemanager befindet sich zwischen dem Wechselrichter, der benutzerlast und dem netz und erfasst die Spannung und den Strom des Netzanschlusspunkts. Abhängig von den Bedürfnissen und Einstellungen des Benutzers wird die Ausgangsleistung des Wechselrichters in Echtzeit angepasst, um die endgültige Einspeisung ins Netz zu steuern.
Technische Daten
Nennspannung: 230/400 Vac
Spannungsbereich: 173-400 Vac
Netzanschluss: 3W/N/PE
Frequenz: 50/60 Hz
Frequenzbereich: 45-55 Hz/55-65 Hz
Max. Strom: 150 A
Max. Eingangsstrom: 40 mA
Abmessungen: 350 x 330 x 107 mm
Gewicht: 6 kg
Betriebstemperaturbereich: -25°C - +60°C
Schutzklasse: IP65
Lieferumfang:
1x Growatt SEM-E 50 kW
€350.82*
€294.81**
Der Smart Energy Manager (SME-E 50kW) von Growatt wurde für die intelligente Überwachung des Eigenverbrauchs und die Begrenzu...
Der Smart Energy Manager (SME-E 50kW) von Growatt wurde für die intelligente Überwachung des Eigenverbrauchs und die Begrenzung des Exports von Solar- und Speichersystemen konzipiert. Zudem besitzt er die Möglichkeit flexible Stromwandler (CT`s) für verschiedene Systemgrößen mit hoher Regelgenauigkeit bereitzustellen. Durch seine Failsafe-Funktion gewährleistet er zusätzlich die Sicherheit und Zuverlässigkeit des Systems.
Eigenschaften
Intelligente Verwaltung
24h Überwachung des Eigenverbrauchs
Online Monitoring
Einspeisebegrenzungen
Ausfallsicher und hohe Regelgenauigkeit
Flexible CT`s für unterschiedliche Projektgrößen
Nutzbar für 380V und 480V Dreiphasen-Netzen
Max. Wechselrichter-Anzahl: 10
RS485- und Ethernet-Anschluss
Bestandteile vom Smart Energiemanager
ShineMaster: Ist der Steuerkern und dient als Datenkommunikation mit dem Wechselrichter und dem Stromzähler. Er realisiert die Funktion der Wechselrichterleistungsregelung und die Fernüberwachung.
Stromzähler: Er zeigt die Spannung, den Strom und die Funktionsparameter in Echtzeitüberwachung an.
Stromversorgung: Versorgung für den ShineMaster.
Schutzschalter: Steuert den Start und die Abschaltung des Stromzählers und der Stromversorgung.
Anschlussklemme: Hier wird die Verkabelung vorgenommen.
Der Smarte Energiemanager unterstützt sowohl netzgekoppelte, als auch Hybrid-/AC-gekoppelte Wechselrichter und arbeitet wie folgt: Der Wechselrichter wandelt den von der Sonne erzeugten Gleichstrom in den photovoltaischen String in Wechselstrom um. Die vom Wechselrichter erzeugte Energie kann für die benutzerlast, die Batterieladung oder die Einspeisung in netz verwendet werden. Der Smarte Energiemanager befindet sich zwischen dem Wechselrichter, der benutzerlast und dem netz und erfasst die Spannung und den Strom des Netzanschlusspunkts. Abhängig von den Bedürfnissen und Einstellungen des Benutzers wird die Ausgangsleistung des Wechselrichters in Echtzeit angepasst, um die endgültige Einspeisung ins Netz zu steuern.
Technische Daten
Nennspannung: 230/400 Vac
Spannungsbereich: 173-400 Vac
Netzanschluss: 3W/N/PE
Frequenz: 50/60 Hz
Frequenzbereich: 45-55 Hz/55-65 Hz
Max. Strom: 150 A
Max. Eingangsstrom: 40 mA
Abmessungen: 350 x 330 x 107 mm
Gewicht: 6 kg
Betriebstemperaturbereich: -25°C - +60°C
Schutzklasse: IP65
Lieferumfang:
1x Growatt SEM-E 50 kW
Der Smart Energy Manager (SME-E 100kW) von Growatt wurde für die intelligente Überwachung des Eigenverbrauchs und die Begrenzung des Exports von Solar- und Speichersystemen konzipiert. Zudem besitzt er die Möglichkeit flexible Stromwandler (CT`s) für verschiedene Systemgrößen mit hoher Regelgenauigkeit bereitzustellen. Durch seine Failsave-Funktion gewährleistet er zusätzlich die Sicherheit und Zuverlässigkeit des Systems.
Eigenschaften
Intelligente Verwaltung
24h Überwachung des Eigenverbrauchs
Online Monitoring
Einspeisebegrenzungen
Ausfallsicher und hohe Regelgenauigkeit
Flexible CT`s für unterschiedliche Projektgrößen
Nutzbar für 380V und 480V Dreiphasen-Netzen
Max. Wechselrichter-Anzahl: 10
RS485- und Ethernet-Anschluss
Bestandteile vom Smart Energiemanager
ShineMaster: Ist der Steuerkern und dient als Datenkommunikation mit dem Wechselrichter und dem Stromzähler. Er realisiert die Funktion der Wechselrichterleistungsregelung und die Fernüberwachung.
Stromzähler: Er zeigt die Spannung, den Strom und die Funktionsparameter in Echtzeitüberwachung an.
Stromversorgung: Versorgung für den ShineMaster.
Schutzschalter: Steuert den Start und die Abschaltung des Stromzählers und der Stromversorgung.
Anschlussklemme: Hier wird die Verkabelung vorgenommen.
Der Smarte Energiemanager unterstützt sowohl netzgekoppelte, als auch Hybrid-/AC-gekoppelte Wechselrichter und arbeitet wie folgt: Der Wechselrichter wandelt den von der Sonne erzeugten Gleichstrom in den photovoltaischen String in Wechselstrom um. Die vom Wechselrichter erzeugte Energie kann für die benutzerlast, die Batterieladung oder die Einspeisung in netz verwendet werden. Der Smarte Energiemanager befindet sich zwischen dem Wechselrichter, der benutzerlast und dem netz und erfasst die Spannung und den Strom des Netzanschlusspunkts. Abhängig von den Bedürfnissen und Einstellungen des Benutzers wird die Ausgangsleistung des Wechselrichters in Echtzeit angepasst, um die endgültige Einspeisung ins Netz zu steuern.
Technische Daten
Nennspannung: 230/400 Vac
Spannungsbereich: 173-400 Vac
Netzanschluss: 3W/N/PE
Frequenz: 50/60 Hz
Frequenzbereich: 45-55 Hz/55-65 Hz
Max. Strom: 250 A
Max. Eingangsstrom: 40 mA
Abmessungen: 350 x 330 x 107 mm
Gewicht: 6 kg
Betriebstemperaturbereich: -25°C - +60°C
Schutzklasse: IP65
Lieferumfang:
1x Growatt SEM-E 100 kW
€522.70*
€439.24**
Der Smart Energy Manager (SME-E 100kW) von Growatt wurde für die intelligente Überwachung des Eigenverbrauchs und die Begrenz...
Der Smart Energy Manager (SME-E 100kW) von Growatt wurde für die intelligente Überwachung des Eigenverbrauchs und die Begrenzung des Exports von Solar- und Speichersystemen konzipiert. Zudem besitzt er die Möglichkeit flexible Stromwandler (CT`s) für verschiedene Systemgrößen mit hoher Regelgenauigkeit bereitzustellen. Durch seine Failsave-Funktion gewährleistet er zusätzlich die Sicherheit und Zuverlässigkeit des Systems.
Eigenschaften
Intelligente Verwaltung
24h Überwachung des Eigenverbrauchs
Online Monitoring
Einspeisebegrenzungen
Ausfallsicher und hohe Regelgenauigkeit
Flexible CT`s für unterschiedliche Projektgrößen
Nutzbar für 380V und 480V Dreiphasen-Netzen
Max. Wechselrichter-Anzahl: 10
RS485- und Ethernet-Anschluss
Bestandteile vom Smart Energiemanager
ShineMaster: Ist der Steuerkern und dient als Datenkommunikation mit dem Wechselrichter und dem Stromzähler. Er realisiert die Funktion der Wechselrichterleistungsregelung und die Fernüberwachung.
Stromzähler: Er zeigt die Spannung, den Strom und die Funktionsparameter in Echtzeitüberwachung an.
Stromversorgung: Versorgung für den ShineMaster.
Schutzschalter: Steuert den Start und die Abschaltung des Stromzählers und der Stromversorgung.
Anschlussklemme: Hier wird die Verkabelung vorgenommen.
Der Smarte Energiemanager unterstützt sowohl netzgekoppelte, als auch Hybrid-/AC-gekoppelte Wechselrichter und arbeitet wie folgt: Der Wechselrichter wandelt den von der Sonne erzeugten Gleichstrom in den photovoltaischen String in Wechselstrom um. Die vom Wechselrichter erzeugte Energie kann für die benutzerlast, die Batterieladung oder die Einspeisung in netz verwendet werden. Der Smarte Energiemanager befindet sich zwischen dem Wechselrichter, der benutzerlast und dem netz und erfasst die Spannung und den Strom des Netzanschlusspunkts. Abhängig von den Bedürfnissen und Einstellungen des Benutzers wird die Ausgangsleistung des Wechselrichters in Echtzeit angepasst, um die endgültige Einspeisung ins Netz zu steuern.
Technische Daten
Nennspannung: 230/400 Vac
Spannungsbereich: 173-400 Vac
Netzanschluss: 3W/N/PE
Frequenz: 50/60 Hz
Frequenzbereich: 45-55 Hz/55-65 Hz
Max. Strom: 250 A
Max. Eingangsstrom: 40 mA
Abmessungen: 350 x 330 x 107 mm
Gewicht: 6 kg
Betriebstemperaturbereich: -25°C - +60°C
Schutzklasse: IP65
Lieferumfang:
1x Growatt SEM-E 100 kW
Der Growatt Shine Master Datenlogger (MPN: Shine Master) dient als hervorragende Überwachungslösung und wurde speziell für Solaranlagen entwickelt. Zudem ist er in der Lage, mit bis zu 500m Reichweite, insgesamt 32 Wechselrichter zu überwachen. Diese werden mit der Kommunikationsmöglichkeit RS485 mit dem Shine Master verbunden.
Der ShineMaster im Überblick
Lokaler Webserver zur einfachen Konfiguration
Einspeiseregelung verfügbar mit Stromzähler
Anschluss von bis zu 32 Wechselrichtern
Multifunktional und hohe Leistung
Growatt Shine-Überwachungsplattform
Mit dem ShineMaster kann die Growatt Monitoring-Plattform nutzen. Diese ist als Smartphone-App (für iOS und Android), als auch in einer Webversion verfügbar. Die Nutzung der Plattform ist kostenfrei. Über Shine können alle Growatt-Produkte, die in Besitz sind, konfiguriert und überwacht werden. Die Anzeige des Eigenverbrauchs und Trends ist ebenfalls möglich.
Kompatible Wechselrichter-Serien:
MID 17-22KTL3-X/XH
MID 25-40KTL3-X
MAX 50-80KTL3 LV
MAX 100-125KTL3 LV
SPH 3000-6000TL BL-UP
SPH 4000-10000TL3 BH-UP
SPA 4000-10000TL3 BH-UP
Technische Daten:
Netzteil Input: 100-240V, 50/60Hz AC
Netzteil Output: 5V, 1A DC
Energieverbrauch: 2,5W
Max. Kommunikationsreichweite: 500m
Abmessungen: 130 x 84 x 25 mm
Gewicht: 180g
Montage: Wandmontage
Schutzklasse: IP30
Statusanzeige: LED
Betriebstemperaturbereich: -30°C - +60°C
Herstellergarantie: 1 Jahr
Lieferumfang:
1x Growatt Shine Master
€350.82*
€294.81**
Der Growatt Shine Master Datenlogger (MPN: Shine Master) dient als hervorragende Überwachungslösung und wurde spezi...
Der Growatt Shine Master Datenlogger (MPN: Shine Master) dient als hervorragende Überwachungslösung und wurde speziell für Solaranlagen entwickelt. Zudem ist er in der Lage, mit bis zu 500m Reichweite, insgesamt 32 Wechselrichter zu überwachen. Diese werden mit der Kommunikationsmöglichkeit RS485 mit dem Shine Master verbunden.
Der ShineMaster im Überblick
Lokaler Webserver zur einfachen Konfiguration
Einspeiseregelung verfügbar mit Stromzähler
Anschluss von bis zu 32 Wechselrichtern
Multifunktional und hohe Leistung
Growatt Shine-Überwachungsplattform
Mit dem ShineMaster kann die Growatt Monitoring-Plattform nutzen. Diese ist als Smartphone-App (für iOS und Android), als auch in einer Webversion verfügbar. Die Nutzung der Plattform ist kostenfrei. Über Shine können alle Growatt-Produkte, die in Besitz sind, konfiguriert und überwacht werden. Die Anzeige des Eigenverbrauchs und Trends ist ebenfalls möglich.
Kompatible Wechselrichter-Serien:
MID 17-22KTL3-X/XH
MID 25-40KTL3-X
MAX 50-80KTL3 LV
MAX 100-125KTL3 LV
SPH 3000-6000TL BL-UP
SPH 4000-10000TL3 BH-UP
SPA 4000-10000TL3 BH-UP
Technische Daten:
Netzteil Input: 100-240V, 50/60Hz AC
Netzteil Output: 5V, 1A DC
Energieverbrauch: 2,5W
Max. Kommunikationsreichweite: 500m
Abmessungen: 130 x 84 x 25 mm
Gewicht: 180g
Montage: Wandmontage
Schutzklasse: IP30
Statusanzeige: LED
Betriebstemperaturbereich: -30°C - +60°C
Herstellergarantie: 1 Jahr
Lieferumfang:
1x Growatt Shine Master
Der Growatt ATS-T ist ein 3-phasiger Transferschalter und kontrolliert sowohl bei Anbindung ans Stromnetz, als auch im Inselbetrieb den Wechsel der Schaltvorrichtung, um der EPS-Belastung Strom zu geben. Er wird mit Growatt-Wechselrichtern der Serien SPH und SPA in Einsatz gebracht. Der ATS-T kann im Falle eines Stromausfalls automatisch auf Inselbetrieb switchen und somit alles weitere mit Strom versorgen, um einen reibungslosen Betrieb zu garantieren. Um Überhitzungen zu vermeiden, kommt sein natürliches Kühlungskonzept zum Einsatz.
Technische Daten
Spannung: 230V/400Vac
Frequenz: 50/60 Hz
Max. Strom: 30 A
Schutzart: IP65
Betriebstemperatur: -25°C - +50°C
Gewicht: 3,8 kg
Abmessungen: 312 x 295,4 x 85 mm
Lieferumfang:
1x Growatt ATS-T 3-phasiger Transferschalter
€350.82*
Der Growatt ATS-T ist ein 3-phasiger Transferschalter und kontrolliert sowohl bei Anbindung ans Stromnetz, als auch im Inselbetrieb den Wech...
Der Growatt ATS-T ist ein 3-phasiger Transferschalter und kontrolliert sowohl bei Anbindung ans Stromnetz, als auch im Inselbetrieb den Wechsel der Schaltvorrichtung, um der EPS-Belastung Strom zu geben. Er wird mit Growatt-Wechselrichtern der Serien SPH und SPA in Einsatz gebracht. Der ATS-T kann im Falle eines Stromausfalls automatisch auf Inselbetrieb switchen und somit alles weitere mit Strom versorgen, um einen reibungslosen Betrieb zu garantieren. Um Überhitzungen zu vermeiden, kommt sein natürliches Kühlungskonzept zum Einsatz.
Technische Daten
Spannung: 230V/400Vac
Frequenz: 50/60 Hz
Max. Strom: 30 A
Schutzart: IP65
Betriebstemperatur: -25°C - +50°C
Gewicht: 3,8 kg
Abmessungen: 312 x 295,4 x 85 mm
Lieferumfang:
1x Growatt ATS-T 3-phasiger Transferschalter
The spm-e electricity meter from Growatt is a complete 1-phase solution for grid export limitation and self-consumption monitoring, whose data can be read on an LCD display. It is characterized by high measurement accuracy and simple installation through plug and play. With RS485 communication and direct connections, the electricity meter is compatible with many Growatt inverters.Quick plug-and-play installationPrecise measurement of current consumptionFor single-phase systemsSupports zero export function with Growatt invertersTechnical dataDimensions: 36 x 99 x 63 mmWeight: 223 gOperating temperature range: -25°C - +55°CStorage temperature range: -40°C - +70°CProtection class: IP51Current type: 1P2WInput voltage: 184 - 276v ACFrequency: 50/60 HzMax. Current: 100 ACommunication: RS485Scope of delivery:1x Growatt spm-e 1-phase electricity meter
€84.42*
€70.94**
The spm-e electricity meter from Growatt is a complete 1-phase solution for grid export limitation and self-consumption monitoring, whose data can be ...
The spm-e electricity meter from Growatt is a complete 1-phase solution for grid export limitation and self-consumption monitoring, whose data can be read on an LCD display. It is characterized by high measurement accuracy and simple installation through plug and play. With RS485 communication and direct connections, the electricity meter is compatible with many Growatt inverters.Quick plug-and-play installationPrecise measurement of current consumptionFor single-phase systemsSupports zero export function with Growatt invertersTechnical dataDimensions: 36 x 99 x 63 mmWeight: 223 gOperating temperature range: -25°C - +55°CStorage temperature range: -40°C - +70°CProtection class: IP51Current type: 1P2WInput voltage: 184 - 276v ACFrequency: 50/60 HzMax. Current: 100 ACommunication: RS485Scope of delivery:1x Growatt spm-e 1-phase electricity meter
Das AXE 5.0L Batterie-Anschlusskabel von Growatt verbindet den Wechselrichter mit der Growatt AXE LV-Batterie. Für die Verbindung zwischen Wechselrichter und der LFP-Batterie von Growatt wird nur ein Kabelstrang benötigt, denn das praktische AXE 5.0L Batterie Kabel beinhaltet bereits Pluskabel, Minuskabel, Erdungskabel sowie ein RS 485 Kommunikationsanschlusskabel. Es hat eine Länge von 2 Meter, 33 mm² im Kabel-Querschnitt und ist für eine maximale Betriebsspannung von 1000V geeignet.
Wichtigste Eigenschaften
Kabel-Querschnitt: 33mm²
Länge des Anschlusskabels: 2 Meter
Maximale Betriebsspannung: 1000V
Das AXE-Batteriesystem
Die AXE 5.0L-Batterie basiert auf der bewährten LiFePO4 (Lithium-Eisenphosphat) Technologie, die eine Reihe von Vorteilen bietet. Diese fortschrittliche Batterietechnologie zeichnet sich durch hohe Sicherheit, eine lange Lebensdauer und zuverlässige Leistung aus. Die kobaltfreien LiFePO4-Batterien sind bekannt für ihre thermische Stabilität und ihre Fähigkeit, hohe Entladeströme zu liefern. Im Vergleich zu anderen Batterietechnologien sind sie weniger anfällig für Überhitzung und thermische Ausfälle. Die AXE 5.0L-Batterie zeigt eine hohe Temperaturbeständigkeit und Stabilität und bietet mit bis zu 5.000 Ladezyklen eine zu erwartende Lebensdauer von mehr als 10 Jahren.
Lieferumfang:
1x AXE 5.0L Batterie Kabel
€130.83*
€109.94**
2 Meter
(€65.42* / 1 Meter)
Content:
2 Meter
(€65.42* / 1 Meter)
Das AXE 5.0L Batterie-Anschlusskabel von Growatt verbindet den Wechselrichter mit der Growatt AXE LV-Batterie. Für die Verbindung zwischen Wechse...
Das AXE 5.0L Batterie-Anschlusskabel von Growatt verbindet den Wechselrichter mit der Growatt AXE LV-Batterie. Für die Verbindung zwischen Wechselrichter und der LFP-Batterie von Growatt wird nur ein Kabelstrang benötigt, denn das praktische AXE 5.0L Batterie Kabel beinhaltet bereits Pluskabel, Minuskabel, Erdungskabel sowie ein RS 485 Kommunikationsanschlusskabel. Es hat eine Länge von 2 Meter, 33 mm² im Kabel-Querschnitt und ist für eine maximale Betriebsspannung von 1000V geeignet.
Wichtigste Eigenschaften
Kabel-Querschnitt: 33mm²
Länge des Anschlusskabels: 2 Meter
Maximale Betriebsspannung: 1000V
Das AXE-Batteriesystem
Die AXE 5.0L-Batterie basiert auf der bewährten LiFePO4 (Lithium-Eisenphosphat) Technologie, die eine Reihe von Vorteilen bietet. Diese fortschrittliche Batterietechnologie zeichnet sich durch hohe Sicherheit, eine lange Lebensdauer und zuverlässige Leistung aus. Die kobaltfreien LiFePO4-Batterien sind bekannt für ihre thermische Stabilität und ihre Fähigkeit, hohe Entladeströme zu liefern. Im Vergleich zu anderen Batterietechnologien sind sie weniger anfällig für Überhitzung und thermische Ausfälle. Die AXE 5.0L-Batterie zeigt eine hohe Temperaturbeständigkeit und Stabilität und bietet mit bis zu 5.000 Ladezyklen eine zu erwartende Lebensdauer von mehr als 10 Jahren.
Lieferumfang:
1x AXE 5.0L Batterie Kabel
Auf dem AXE 5.0L Batterie Sockel von Growatt können bis zu 10 Growatt AXE LV-Batterien (MPN AXE 5.0L) in einem Turm gestapelt werden und somit Speicherkapazitäten von 5kWh bis 50kWh verbunden werden.
AXE Batterie-Basis
Für die Bodenmontage von Growatt AXE Batterien
Für bis zu 10 AXE 5.0L Batterien geeignet
Je Batterieturm eine Basis
Abmessungen (B/H/T): 654/25/353 mm
Das AXE-Battriesystem
Das modulare Batteriesystem verfügt über ein integriertes Stecksystem, so dass durch die stapelbare Installation keine zusätzlichen Kabelverbindungen nötig sind. Es können bis zu 10 Batterien zusammen gesteckt und max. 8 Türme im Verbund betrieben werden. Somit bietet das System eine flexible Kapazität zwischen 5kWh und 400kWh und lässt sich mit nur einem einzigen Kabelstrang an den Wechselrichter anschließen, da alle externen Kabel in einem Stecker integriert sind.
Lieferumfang:
1x AXE 5.0L Batteriebasis
€75.83*
€63.72**
Auf dem AXE 5.0L Batterie Sockel von Growatt können bis zu 10 Growatt AXE LV-Batterien (MPN AXE 5.0L) in einem Turm gestapelt werden und som...
Auf dem AXE 5.0L Batterie Sockel von Growatt können bis zu 10 Growatt AXE LV-Batterien (MPN AXE 5.0L) in einem Turm gestapelt werden und somit Speicherkapazitäten von 5kWh bis 50kWh verbunden werden.
AXE Batterie-Basis
Für die Bodenmontage von Growatt AXE Batterien
Für bis zu 10 AXE 5.0L Batterien geeignet
Je Batterieturm eine Basis
Abmessungen (B/H/T): 654/25/353 mm
Das AXE-Battriesystem
Das modulare Batteriesystem verfügt über ein integriertes Stecksystem, so dass durch die stapelbare Installation keine zusätzlichen Kabelverbindungen nötig sind. Es können bis zu 10 Batterien zusammen gesteckt und max. 8 Türme im Verbund betrieben werden. Somit bietet das System eine flexible Kapazität zwischen 5kWh und 400kWh und lässt sich mit nur einem einzigen Kabelstrang an den Wechselrichter anschließen, da alle externen Kabel in einem Stecker integriert sind.
Lieferumfang:
1x AXE 5.0L Batteriebasis
The spm-ct-e electricity meter from Growatt(MPN sdm120ct) is a complete 1-phase solution for limiting grid export and monitoring the self-consumption of your Solarasystem, the data of which can be read on an LCD display. By accurately monitoring your self-consumption, you can optimize your energy consumption and maximize the efficiency of your Solarasystem. The smart meter is characterized by its high measuring accuracy and easy installation through plug and play. With rs485 communication and direct connections, the electricity meter is compatible with most Growatt inverters and storage systems. The smart meter spm-ct-e at a glance Control of export power & self-consumption For single-phase systems High measuring accuracy (class 1) Quick installation - plug & play Meter with ct to simplify cabling Technical data Rated voltage: 230V Max. Current: 100 A Current type: 1P2W Input voltage: 184 - 276v AC Communication: rs485, Modbus-RTU Operating temperature range: -25°C - +55°C Storage temperature range: -40°C - +70°C Frequency: 50/60Hz Humidity: 0 to 90%, non-condensing Weight: 80g Dimensions: 118 x 18 x 64 mm Protection class: IP51 rs485 cable length: 15m ct cable length: 5m Scope of delivery 1x Growatt electricity meter spm-ct-e Smart Meter 1x 5m ct cable 1x 15m rs485 cable
€178.95*
€150.38**
The spm-ct-e electricity meter from Growatt(MPN sdm120ct) is a complete 1-phase solution for limiting grid export and monitoring the self-consumption ...
The spm-ct-e electricity meter from Growatt(MPN sdm120ct) is a complete 1-phase solution for limiting grid export and monitoring the self-consumption of your Solarasystem, the data of which can be read on an LCD display. By accurately monitoring your self-consumption, you can optimize your energy consumption and maximize the efficiency of your Solarasystem. The smart meter is characterized by its high measuring accuracy and easy installation through plug and play. With rs485 communication and direct connections, the electricity meter is compatible with most Growatt inverters and storage systems. The smart meter spm-ct-e at a glance Control of export power & self-consumption For single-phase systems High measuring accuracy (class 1) Quick installation - plug & play Meter with ct to simplify cabling Technical data Rated voltage: 230V Max. Current: 100 A Current type: 1P2W Input voltage: 184 - 276v AC Communication: rs485, Modbus-RTU Operating temperature range: -25°C - +55°C Storage temperature range: -40°C - +70°C Frequency: 50/60Hz Humidity: 0 to 90%, non-condensing Weight: 80g Dimensions: 118 x 18 x 64 mm Protection class: IP51 rs485 cable length: 15m ct cable length: 5m Scope of delivery 1x Growatt electricity meter spm-ct-e Smart Meter 1x 5m ct cable 1x 15m rs485 cable
The combination of a GroBoost from Growattand a Solaranlage, you can effectively use the surplus solar energy to heat your hot water buffer tank. This leads to a significant increase in the efficiency of your Solarasystem. Depending on the output of the Solarasystem, it is possible, for example, to heat all the water during the summer months using only the surplus solar energy. The GroBoost enables adjustable output control from 0 to 10.8 kW. It divides the power into three zones, for which three independent power outputs are available. When integrated into the smart home system, the GroBoost can achieve a solar self-consumption rate of up to 92%. about the GroBoost Compatible with single-phase and three-phase immersion heaters up to 10.8 kW Compatible with three 3.6 kW immersion heaters Adjustable power control from 0-10.8 kW Dynamic power control leads to zero export Three independent power outputs Three-zone room heating Intelligent and economical Smart home energy management Application flexibility Operating modes Smart mode: The GroBoost will operate according to the set time period and temperature, with 5 groups of adjustable time periods. During Smart mode, the appliance operates at its rated power, but the power output of phase l1 is adjustable. PV linking mode: The GroBoost can receive a real-time energy flow via the ShineLink system. By setting the execution strategy, it will automatically operate and adjust its output power when a certain power is exported to or imported from the grid to make the best use of solar energy and maximize the self-consumption of solar power. In addition, there is also a thermal protection function to guarantee the water temperature during the set time period and temperature pinch if a grid failure occurs or the solar energy is insufficient. Forced operation mode: Triggered by manually pressing the button, the GroBoost can be force activated and will continue to run until it reaches the maximum temperature (default temperature is 65°C). This is often used in emergencies. For safety reasons, the maximum duration of forced operation mode is 2 hours as standard. Growatt Shine monitoring platform With the ShineLink-X can use the Growatt monitoring platform. This is available as a smartphone app (for iOS and Android) and as a web version. Use of the platform is free of charge. all Growatt products that are owned can be configured and monitored via Shine. It is also possible to display self-consumption and trends. Technical data AC voltage range: 230v AC AC frequency range: 50-60 Hz Linear power control: 0-3.6 kW, 3 outputs Max. Power control 10.8 kW Max. Relay output: 16 a, 230v AC Communication: RF/RS485 Max. Radio communication distance: 120 m Protection class: IP54 Operating temperature range: -25°C - +60°C Storage temperature range: -40°C - +70°C Weight: 3.45 kg Dimensions: 288 x 227 x 101 mm Scope of delivery: 1x Growatt GroBoost control unit for water heating
€350.82*
The combination of a GroBoost from Growattand a Solaranlage, you can effectively use the surplus solar energy to heat your hot water buffer tank. This...
Product is expected to be back in stock on 25 June 2024
Product is expected to be back in stock on 25 June 2024
The combination of a GroBoost from Growattand a Solaranlage, you can effectively use the surplus solar energy to heat your hot water buffer tank. This leads to a significant increase in the efficiency of your Solarasystem. Depending on the output of the Solarasystem, it is possible, for example, to heat all the water during the summer months using only the surplus solar energy. The GroBoost enables adjustable output control from 0 to 10.8 kW. It divides the power into three zones, for which three independent power outputs are available. When integrated into the smart home system, the GroBoost can achieve a solar self-consumption rate of up to 92%. about the GroBoost Compatible with single-phase and three-phase immersion heaters up to 10.8 kW Compatible with three 3.6 kW immersion heaters Adjustable power control from 0-10.8 kW Dynamic power control leads to zero export Three independent power outputs Three-zone room heating Intelligent and economical Smart home energy management Application flexibility Operating modes Smart mode: The GroBoost will operate according to the set time period and temperature, with 5 groups of adjustable time periods. During Smart mode, the appliance operates at its rated power, but the power output of phase l1 is adjustable. PV linking mode: The GroBoost can receive a real-time energy flow via the ShineLink system. By setting the execution strategy, it will automatically operate and adjust its output power when a certain power is exported to or imported from the grid to make the best use of solar energy and maximize the self-consumption of solar power. In addition, there is also a thermal protection function to guarantee the water temperature during the set time period and temperature pinch if a grid failure occurs or the solar energy is insufficient. Forced operation mode: Triggered by manually pressing the button, the GroBoost can be force activated and will continue to run until it reaches the maximum temperature (default temperature is 65°C). This is often used in emergencies. For safety reasons, the maximum duration of forced operation mode is 2 hours as standard. Growatt Shine monitoring platform With the ShineLink-X can use the Growatt monitoring platform. This is available as a smartphone app (for iOS and Android) and as a web version. Use of the platform is free of charge. all Growatt products that are owned can be configured and monitored via Shine. It is also possible to display self-consumption and trends. Technical data AC voltage range: 230v AC AC frequency range: 50-60 Hz Linear power control: 0-3.6 kW, 3 outputs Max. Power control 10.8 kW Max. Relay output: 16 a, 230v AC Communication: RF/RS485 Max. Radio communication distance: 120 m Protection class: IP54 Operating temperature range: -25°C - +60°C Storage temperature range: -40°C - +70°C Weight: 3.45 kg Dimensions: 288 x 227 x 101 mm Scope of delivery: 1x Growatt GroBoost control unit for water heating
Product is expected to be back in stock on 25 June 2024
With the help of the Growatt ShineWifi-S data logger, data from the Growatt S inverter series can be transmitted and viewed in online monitoring via WiFi. Memory data is recorded over a period of one month. Data protection plays a major role in wireless communication, which is why the information is encrypted. The Growatt servers are based in Frankfurt am Main.The Shine WiFi-S at a glanceLED displayRS232 connectionApp configurationOnline monitoring and maintenanceBuilt-in memoryCable-free and easy installationGrowatt monitoring platformThe Growatt monitoring platform can be used with the Shine WiFi-S data logger. This is available as a smartphone app (for iOS and Android) and as a web version. Use of the platform is free of charge. All Growatt products that are owned can be configured and monitored via Shine. It is also possible to display self-consumption and trends.Compatible inverter series:SPH 3000-6000TLSPA 4000-10000tl3 BH-UPTechnical specificationsWireless standard: 802.11 b/g/nWireless frequency range: 2412 - 2472 MHzDimensions: 135 x 79 x 29 mmWeight: 60 gProtection class: IP65Operating temperature range: -40°C - +85°CScope of delivery:1x Growatt Shine WiFi-S data logger
€8.59*
€7.22**
With the help of the Growatt ShineWifi-S data logger, data from the Growatt S inverter series can be transmitted and viewed in online monitoring via W...
With the help of the Growatt ShineWifi-S data logger, data from the Growatt S inverter series can be transmitted and viewed in online monitoring via WiFi. Memory data is recorded over a period of one month. Data protection plays a major role in wireless communication, which is why the information is encrypted. The Growatt servers are based in Frankfurt am Main.The Shine WiFi-S at a glanceLED displayRS232 connectionApp configurationOnline monitoring and maintenanceBuilt-in memoryCable-free and easy installationGrowatt monitoring platformThe Growatt monitoring platform can be used with the Shine WiFi-S data logger. This is available as a smartphone app (for iOS and Android) and as a web version. Use of the platform is free of charge. All Growatt products that are owned can be configured and monitored via Shine. It is also possible to display self-consumption and trends.Compatible inverter series:SPH 3000-6000TLSPA 4000-10000tl3 BH-UPTechnical specificationsWireless standard: 802.11 b/g/nWireless frequency range: 2412 - 2472 MHzDimensions: 135 x 79 x 29 mmWeight: 60 gProtection class: IP65Operating temperature range: -40°C - +85°CScope of delivery:1x Growatt Shine WiFi-S data logger
Der Growatt Shine Lan-X Dongle (MPN: Shine Lan-X) dient einem Growatt-Wechselrichter für die Online-Überwachung und-Wartung. Dafür werden Speicherdaten über einem Monat hinweg festgehalten. Die Growatt-Server sind in Frankfurt stationiert.
Der Shine Lan-X im Überblick
LED-Anzeige
Direkte Ethernet-Verbindung
Einfache Installation
Plug & Play
App Konfiguration
Online-Überwachung und Wartung
Eingebauter Speicher
Growatt Überwachungsplattform
Mit dem Shine Lan-X Dongle kann die Growatt Monitoring-Plattform genutzt werden. Diese ist als Smartphone-App (für iOS und Android), als auch in einer Webversion verfügbar. Die Nutzung der Plattform ist kostenfrei. Über Shine können alle Growatt-Produkte, die in Besitz sind, konfiguriert und überwacht werden. Die Anzeige des Eigenverbrauchs und Trends ist ebenfalls möglich.
Kompatible Wechselrichter-Serien:
MIC 600-3300TL-X
MIN 2500-4600TL-X/XH/XA
MOD 3-15KTL3-X/XH
MID 17-22KTL3-X
MID 25-40KTL3-X
MAX 50-80KTL3 LV
MAX 100-125KTL3 LV
Technische Daten
Nennspannung: 5 V
Nennstromstärke: 400 mA
Wireless Frequenzbereich: 2,4~2,5 GHz
Abmessungen: 152 x 47 x 28 mm
Gewicht: 84 g
Schutzklasse: IP65
Arbeitstemperaturbereich: -30°C - +65°C
Lieferumfang:
1x Growatt Shine Lan-X
€17.18*
€14.44**
Der Growatt Shine Lan-X Dongle (MPN: Shine Lan-X) dient einem Growatt-Wechselrichter für die Online-Überwachung und-Wartung. Dafür...
Der Growatt Shine Lan-X Dongle (MPN: Shine Lan-X) dient einem Growatt-Wechselrichter für die Online-Überwachung und-Wartung. Dafür werden Speicherdaten über einem Monat hinweg festgehalten. Die Growatt-Server sind in Frankfurt stationiert.
Der Shine Lan-X im Überblick
LED-Anzeige
Direkte Ethernet-Verbindung
Einfache Installation
Plug & Play
App Konfiguration
Online-Überwachung und Wartung
Eingebauter Speicher
Growatt Überwachungsplattform
Mit dem Shine Lan-X Dongle kann die Growatt Monitoring-Plattform genutzt werden. Diese ist als Smartphone-App (für iOS und Android), als auch in einer Webversion verfügbar. Die Nutzung der Plattform ist kostenfrei. Über Shine können alle Growatt-Produkte, die in Besitz sind, konfiguriert und überwacht werden. Die Anzeige des Eigenverbrauchs und Trends ist ebenfalls möglich.
Kompatible Wechselrichter-Serien:
MIC 600-3300TL-X
MIN 2500-4600TL-X/XH/XA
MOD 3-15KTL3-X/XH
MID 17-22KTL3-X
MID 25-40KTL3-X
MAX 50-80KTL3 LV
MAX 100-125KTL3 LV
Technische Daten
Nennspannung: 5 V
Nennstromstärke: 400 mA
Wireless Frequenzbereich: 2,4~2,5 GHz
Abmessungen: 152 x 47 x 28 mm
Gewicht: 84 g
Schutzklasse: IP65
Arbeitstemperaturbereich: -30°C - +65°C
Lieferumfang:
1x Growatt Shine Lan-X
Das Verbindungskabel für die APX-Serie von Growatt verbindet zwei Batterietürme des Systems miteinander. Somit wird eine störungsfreie Kommunikation aller Bestandteile gewährleistet.
Das APX-Batteriesystem
Das Growatt APX Batteriesystem ist modular aufgebaut. Zusätzliche Batterien können übereinander gestapelt werden. Die APX 5.0P-B1 hat eine Kapazität von 5kWh und das BMS einen maximalen (Entlade-) Strom von 13A, bzw. 26A. Daraus ergibt sich, dass eine Kapazität von 5-30 kWh erreicht und ausgewählt werden kann. Die Nennspannung pro Batteriemodul beträgt 385 V und der Betriebsspannungsbereich liegt zwischen 330-450V. Die Lithiumeisenphosphatbatterie (LFP) ist frei von Kobalt, was beispielsweise zu einer kostengünstigeren Batterie führt.
Lieferumfang:
1x Growatt APX Verbindungskabel Serienschaltung
€110.21*
€92.61**
Das Verbindungskabel für die APX-Serie von Growatt verbindet zwei Batterietürme des Systems miteinander. Somit wird eine störungsfreie ...
Das Verbindungskabel für die APX-Serie von Growatt verbindet zwei Batterietürme des Systems miteinander. Somit wird eine störungsfreie Kommunikation aller Bestandteile gewährleistet.
Das APX-Batteriesystem
Das Growatt APX Batteriesystem ist modular aufgebaut. Zusätzliche Batterien können übereinander gestapelt werden. Die APX 5.0P-B1 hat eine Kapazität von 5kWh und das BMS einen maximalen (Entlade-) Strom von 13A, bzw. 26A. Daraus ergibt sich, dass eine Kapazität von 5-30 kWh erreicht und ausgewählt werden kann. Die Nennspannung pro Batteriemodul beträgt 385 V und der Betriebsspannungsbereich liegt zwischen 330-450V. Die Lithiumeisenphosphatbatterie (LFP) ist frei von Kobalt, was beispielsweise zu einer kostengünstigeren Batterie führt.
Lieferumfang:
1x Growatt APX Verbindungskabel Serienschaltung
Discover our wide range of accessories for intelligent energy management products from Growatt for efficient monitoring and control of your energy consumption.
With the optional accessories from Growatt's innovative Shine series, you can configure and monitor all your Growatt products. The free Growatt monitoring platform is available as a smartphone app for iOS and Android as well as a web version. You can use the platform to monitor and analyze the energy yield, self-consumption and other important data in real time. It also allows you to display self-consumption and track trends.
Which data logger from the Shine series meets your requirements?
The Shine WiFi-X is a WLAN data logger that provides a wireless connection for monitoring your solar system. It allows you to conveniently record and transfer your system data via your WLAN network.
The Shine LAN-X is a data logger that connects to your network via a LAN connection. It provides a reliable and stable connection for monitoring and recording your system data.
The Shine Link-X is an RF data logger that communicates wirelessly with your Growatt inverters. It enables simple and convenient transmission of your system data to the monitoring platform.
The Shine RF Stick-X is a USB stick that acts as a data logger. It can be connected directly to a compatible inverter and records the system data, which can then be transferred to the monitoring platform via the stick.
The Shine Master is a system data logger that allows you to monitor multiple devices in your solar system and analyze their performance in detail. With the Shine Master, you have a comprehensive overview of your solar system and can quickly identify potential problems.
Other Growatt products:
Growatt's SEM-E energy managers with a capacity of 50 to 100 kW are particularly suitable for larger systems.
With Growatt's smart meter, you can precisely record and optimize your electricity consumption by limiting grid export and accurately measuring your own consumption.
The SPM-E electricity meter for single-phase systems and the TPM-E electricity meter for three-phase systems allow you to accurately measure and monitor your electricity consumption.
The SYN 50-XH Backup Box from Growatt allows you to access your self-generated solar power even in the event of grid outages or unstable grid conditions. Thanks to the intelligent control system, the energy flow is optimally regulated to ensure that your most important consumers are continuously supplied with power.
Open questions?
Our customer service team will be happy to help you. Just give us a call on 08721 91994-00 or send us an e-mail to [email protected]. We look forward to helping you!