Offgridtec SolarFlow 5.76kWh 1780w Hyper 2000 balcony power station Dual-Glass TOPCon incl. Satellite Smart Plug

Offgridtec presents a revolutionary balcony power system including the SolarFlow storage system (MPN: 020210), featuring numerous technologies and safety functions. The key to your flexibility is the Hyper 2000 hybrid inverter, which allows you to charge your balcony power station's batteries with solar or grid power. You can integrate up to four AB2000S batteries into your system, reaching a maximum capacity of 7.68kWh. For solar energy generation, the system includes four reliable solar panels with a generator output of 445W each using TopCon technology. The four solar inputs on the Hyper make installation simple while reducing energy loss compared to parallel wiring.

System Highlights

• Plug & Play – just plug in and save money
• Monitor your self-consumption
• Make your lifestyle more eco-friendly
• Fast return on investment
• Flexible storage with expansion (0.96kWh–7.68kWh)
• Breakthrough technologies and protection features
• Monitoring and control via app
• Save up to €779/year in electricity costs*

*A balcony system with 1780W solar output, 1200W Hyper 2000 output, and two AB2000S batteries can produce up to 5.34kWh per day. Based on a power rate of €0.40/kWh, this equals annual savings of up to €744. Optimal panel alignment, ideal weather, and a suitable base load are assumed. Source: Ertragsdatenbank & Bundesregierung

The System Includes:

• 4x Trina Solar 445W Vertex S+ Dual-Glass N-Type TopCon Solar Modules
• 1x Zendure SolarFlow Hyper 2000 Hub with Microinverter
• 1x Zendure Satellite Smart Plug with App Control (optional)
• 1–4x AB2000S 1920Wh Add-on LiFePO4 Batteries (depending on selection)
• 4x MC4 to MC4 connection cables 6mm², 5m

How Does the SolarFlow Balcony Power System with Hyper 2000 Work?

During the Day: The Hyper converts solar power from the panels into AC electricity for your home. If excess energy is produced that would otherwise feed into the grid, the Hyper 2000 stores it in the batteries, reducing waste. This can be configured via the Zendure app or with a compatible smart meter.
At Night: The Hyper converts the stored energy into AC electricity for your home, significantly improving efficiency and maximizing the system's cost benefits.

• If solar production exceeds the AC output setting, the Hyper 2000 stores the surplus in the connected batteries
• If solar production is below the AC output setting, the full solar output is used directly, and the battery discharges to reach the set AC output
• If no solar energy is generated, the Hyper 2000 uses the batteries to power your home

Trina Solar Vertex S+ 445W Dual-Glass Module

The Trina Solar Vertex S+ (MPN: TSM-NEG9R.28) is a high-efficiency 445W solar module featuring monocrystalline TOPCon cells and dual-glass technology. Thanks to its multi-busbar design, it offers improved absorption, low series resistance, better current conduction, and enhanced reliability. It is certified for extreme wind and snow loads (5400/4000 Pa) and features highly transparent, anti-reflective 1.6 mm glass. The frame is made from 30 mm anodized aluminum alloy.

• Multi-busbar technology
• Dual-glass design
• High-density cell interconnection
• N-Type i-TOPCon cell technology

Technical Specifications

• Power (Pmax): 445 W
• Voltage (Vmp): 44.3 V
• Current (Imp): 10.05 A
• Open Circuit Voltage (Voc): 52.6 V
• Short Circuit Current (Isc): 10.71 A
• Cell count: 144
• Junction box protection: IP68
• Dimensions: 1762 x 1134 x 30 mm
• Weight: 21.1 kg

Zendure Hyper 2000

The innovative Hyper 2000 from Zendure is a hybrid inverter that connects your SolarFlow balcony power station to the grid via plug-and-play. It enables battery charging from both solar and grid power. You can also configure up to 1200W bidirectional AC output. Multiple Hyper modules automatically recognize and link if installed on the same phase, and three-phase installations are supported.

• Automatic multi-set connection via ZenLink
• Time-of-use automation
• Smart anti-discharge technology

Technical Specifications

• PV Input
  • Rated voltage: 15V–55V
  • Recommended power: 350W–550W
  • MPPT trackers: 2
  • MPPT voltage range: 16–48V
  • Rated current: 20A per MPPT
  • Rated power: 900W per MPPT
• AC Input/Output
  • Rated power: 1200W
  • Rated voltage: 220V/230V/240V
  • Frequency: 50Hz
  • Rated current: 5.5A
• General
  • Protection class: IP65
  • Weight: 5.4 kg (excluding cables and bracket)
  • Dimensions: 350 x 202 x 78 mm

Zendure SolarFlow AB2000S Expansion Batteries

• Capacity: 1920Wh (40Ah / 48V)
• Battery type: LiFePO4
• Max. expandable capacity: 4 x 1920Wh = 7680Wh
• Protection class: IP65
• Weight: 25 kg
• Dimensions: 450 x 280 x 420 mm

Technologies at a Glance

Aerosol Fire Suppression System: Prevents the formation of flames in the battery without releasing harmful gases. This advanced technology ensures the safety of your solar system.
Anti-Thermal-Runaway Technology: Keeps your energy storage system at optimal temperatures at all times, preventing overheating and fire hazards.
Smart AC Overcharge Protection: If solar input is insufficient, the system automatically switches to grid power. This seamless transition prevents over-discharge and extends battery lifespan.
Battery Balancing Technology: Prioritizes charging of low-capacity cells, preventing overcharging and undercharging, and ensuring balanced operation.
Automatic Self-Heating Function: Maintains performance even in extreme cold. The system uses solar energy to preheat the battery, allowing reliable charging in low temperatures.