Pylontech Force-H1 v2 control unit bms fc0500-40s

Bei dem Force-H2 3,55kWh Batteriemodul von Pylontech (MPN FH9637M) handelt es sich um einen 96V Hochvolt-Akku der neuesten Generation, welcher zum erneuten Male die bewährte Lithium-Eisenphosphat Speichertechnologie besitzt. Diese Akkumulatoren zeichnen sich vor allem, auch bei hoher Leistung, durch eine lange Lebensdauer und einer hohen Sicherheit aus. Durch eine sehr gute Zyklenfestigkeit und hohe Belastungsgrenze, sind die Batteriespeicher ein idealer Partner für eine Leistungsstarke Photovoltaikanlage, welche täglich den Speicher mehrfach laden kann. Eine Kompatibilitätsliste für passende Wechselrichter zu Pylontech-Akkus mit über 30 Marken und Unternehmen, darunter beispielsweise Victron Energy, Growatt, Solis uvm., finden Sie als Download in unseren Anhängen! (Pylontech Compatibility List) Eigenschaften der Force-H2 Serie LiFePO4 Speichertechnologie Dualer aktiver Schutz auf BMS-Ebene Hohe Lade- und Entladeleistung möglich Zyklenlebensdauer: über 5000 bei 95% DoD Vorladefunktion zum Schutz des ESS-Systems vor Überspannungsfunktion Zuverlässige Leistung dank langlebiger Komponenten Flexibel erweiterbar Kompakt und platzsparend Lebensdauer über 15 Jahre Mit vielen verfügbaren Wechselrichtern kompatibel Einfache Installation dank modularem Design Flexibel Erweitern Bei der Force-H2 - Serie tritt die flexible Konfiguration der Kapazität zum Vorschein. Diese ist von 7,1 kWh bis 14,2 kWh erweiterbar. Das modulare Design ist einfach gestaltet und erlaubt somit eine einfach Installation mit unkomplizierter Verbindungen der Kabel. Ein weiterer Fortschritt des neuen Speichersystems besteht darin, dass im Gegensatz zu anderen Systemen, kein Batterieschrank mehr benötigt wird. Durch den vielseitigen und platzsparenden Einsatz eignet sich die Force H2-Serie für verschiedenste Anwendungsszenarien. Hohe Zyklen-Lebensdauer Die extrem hohe Zyklen-Lebensdauer der verbauten LiFePo4 Zellen machen Pylontech Force-H2 Module zur optimalen Speicherlösung für Photovoltaikanlagen. Unabhängig ob es sich bei dem Solarsystem um eine netzgeführte- oder eine Inselanlage handelt, bietet der Pylontech Speicher einige Vorteile gegenüber typischen Bleibatterien und anderen Lithium Technologien. Eigenverbrauch optimal abdecken In Wohngebäuden ist der Energiebedarf morgens und abends höher, während die erzeugte Solarenergie erst am Mittag den Höchstwert erreicht. Die Batteriespeichersysteme der Force Serie von Pylontech gleichen diese Differenz zwischen Verbrauch und Erzeugung elektrischer Energie aus. Selbst ein kleiner Batteriespeicher mit einer Kapazität von bis zu 15 kWh kann den Eigenverbrauch in einem Mehrpersonenhaushalt spürbar optimieren und den ständig steigenden Stromkosten entgegenwirken. Größere Speicher ermöglichen durch gezielte Reduzierung der Entladetiefe eine längere Lebensdauer oder erhöhen die Reserven bei einem bewölkten Tag oder Stromausfall. Technische Daten Batterie-Typ: Lithium-Eisenphosphat (LiFePo4) Nennspannung: 96V DC Speicherkapazität: 3552 Wh Kommunikation: CAN, Modbus Gewicht: 35 kg Abmessungen: 450 x 296 x 296 mm Schutzart: IP55 Betriebstemperaturbereich: 0 - +50°C Temperaturbereich Lagerung: -20°C - +60°C Garantie: 15 Jahre Herstellergarantie Zertifizierung: VDE2510-50,IEC62619, IEC62477-1, IEC62040-1, CEC, CE, UN38.8 Aufgrund der Klassifizierung als Gefahrgut wird dieses Produkt per Spedition verschickt! Lieferumfang: 1x Pylontech Force-H2 3,55 kWh 96V Speicher 1x 3,5m DC-Kabelsatz 1x RJ45 Datenkabel 1x Montageschrauben 1x Bedienungsanleitung

The Pylontech H1 storage system embodies the future of energy storage. With a modular design, it redefines versatility. From 7.1 kWh to a maximum 149.1 kWh capacity, the stackable high voltage system offers flexible configurations that seamlessly adapt to your needs. The redesign of this system simplifies installation with effortless connections, saving installers valuable time. Whether for indoor or outdoor use, the H1 storage system is synonymous with reliability and safety. With the ability to connect up to 7 systems to one bms and 6 battery towers in parallel, the Pylontech H1 storage system redefines the boundaries of energy availability. A Kompatibilitätsliste for suitable inverters for Pylontech batteries with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our attachments! (Pylontech Compatibility List) The Force H1 system contains Pylontech Force-H1 3.55 kWh 48v storage (2-7 modules depending on selection) Pylontech Force-H1 control unit bms 3.5m DC cable set RJ45 data cable Mounting screws Operating instructions The Force-H1 series: LiFePO4 storage technology Cycle life: over 5000 at 95% DoD Dual active protection at bms level High charging and discharging capacity possible Pre-charging function to protect the ESS system from overvoltage function Reliable performance thanks to durable components Flexibly expandable Compact and space-saving Service life over 15 years Compatible with many available inverters Easy installation thanks to modular design Flexible expansion With the Force-H1 series, the flexible configuration of the capacity comes to the fore. This can be expanded from 7.1 kWh to 24.86 kWh per tower. A total of up to 6 battery towers are possible. The modular design is simple and therefore allows easy installation with uncomplicated connection of the cables. Another advantage of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Thanks to its versatile and space-saving use, the Force H1 series is suitable for a wide range of application scenarios. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech Force-H1 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Optimum coverage of self-consumption In residential buildings, the energy demand is higher in the morning and evening, while the solar energy generated only reaches its maximum value at midday. The battery storage systems in the Force series from Pylontech compensate for this difference between consumption and generation of electrical energy. Even a small battery storage system with a capacity of up to 15 kWh can noticeably optimize self-consumption in a multi-person household and counteract the constantly rising cost of electricity. Larger storage systems enable a longer service life by specifically reducing the depth of discharge or increase the reserves in the event of a cloudy day or power outage. Intuitive control panel with LED displays The control panel on the control unit makes it possible to check the current status of the battery tower at any time. The panel also allows the communication speed (baud rate) to be set directly on the unit. Technical data Force-H1 bms Dimensions: 600 x 380 x 150 mm Weight: 14 kg Manufacturer part number: FC0500-40S-V2 The Force-H1 bms protects against: Deep discharge and overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Technical data Force-H1 battery Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48v DC Storage capacity: 3552 Wh Communication: can, Modbus Weight: 36 kg Dimensions: 600 x 380 x 170 Protection class: IP55 Operating temperature range: 0 - +50°C Storage temperature range: -20°C - +60°C Warranty: 15-year manufacturer's warranty Certification: vde2510-50,iec62619, iec62477-1, iec62040-1, cec, CE, UN38.8 Due to the classification as dangerous goods, this product will be shipped by a forwarding agent!

The Pylontech H1 storage system embodies the future of energy storage. With a modular design, it redefines versatility. From 7.1 kWh to a maximum 149.1 kWh capacity, the stackable high voltage system offers flexible configurations that seamlessly adapt to your needs. The redesign of this system simplifies installation with effortless connections, saving installers valuable time. Whether for indoor or outdoor use, the H1 storage system is synonymous with reliability and safety. With the ability to connect up to 7 systems to one bms and 6 battery towers in parallel, the Pylontech H1 storage system redefines the boundaries of energy availability. A Kompatibilitätsliste for suitable inverters for Pylontech batteries with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our attachments! (Pylontech Compatibility List) The Force H1 system contains Pylontech Force-H1 3.55 kWh 48v storage (2-7 modules depending on selection) Pylontech Force-H1 control unit bms 3.5m DC cable set RJ45 data cable Mounting screws Operating instructions The Force-H1 series: LiFePO4 storage technology Cycle life: over 5000 at 95% DoD Dual active protection at bms level High charging and discharging capacity possible Pre-charging function to protect the ESS system from overvoltage function Reliable performance thanks to durable components Flexibly expandable Compact and space-saving Service life over 15 years Compatible with many available inverters Easy installation thanks to modular design Flexible expansion With the Force-H1 series, the flexible configuration of the capacity comes to the fore. This can be expanded from 7.1 kWh to 24.86 kWh per tower. A total of up to 6 battery towers are possible. The modular design is simple and therefore allows easy installation with uncomplicated connection of the cables. Another advantage of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Thanks to its versatile and space-saving use, the Force H1 series is suitable for a wide range of application scenarios. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech Force-H1 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Optimum coverage of self-consumption In residential buildings, the energy demand is higher in the morning and evening, while the solar energy generated only reaches its maximum value at midday. The battery storage systems in the Force series from Pylontech compensate for this difference between consumption and generation of electrical energy. Even a small battery storage system with a capacity of up to 15 kWh can noticeably optimize self-consumption in a multi-person household and counteract the constantly rising cost of electricity. Larger storage systems enable a longer service life by specifically reducing the depth of discharge or increase the reserves in the event of a cloudy day or power outage. Intuitive control panel with LED displays The control panel on the control unit makes it possible to check the current status of the battery tower at any time. The panel also allows the communication speed (baud rate) to be set directly on the unit. Technical data Force-H1 bms Dimensions: 600 x 380 x 150 mm Weight: 14 kg Manufacturer part number: FC0500-40S-V2 The Force-H1 bms protects against: Deep discharge and overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Technical data Force-H1 battery Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48v DC Storage capacity: 3552 Wh Communication: can, Modbus Weight: 36 kg Dimensions: 600 x 380 x 170 Protection class: IP55 Operating temperature range: 0 - +50°C Storage temperature range: -20°C - +60°C Warranty: 15-year manufacturer's warranty Certification: vde2510-50,iec62619, iec62477-1, iec62040-1, cec, CE, UN38.8 Due to the classification as dangerous goods, this product will be shipped by a forwarding agent!

The Pylontech H1 storage system embodies the future of energy storage. With a modular design, it redefines versatility. From 7.1 kWh to a maximum 149.1 kWh capacity, the stackable high voltage system offers flexible configurations that seamlessly adapt to your needs. The redesign of this system simplifies installation with effortless connections, saving installers valuable time. Whether for indoor or outdoor use, the H1 storage system is synonymous with reliability and safety. With the ability to connect up to 7 systems to one bms and 6 battery towers in parallel, the Pylontech H1 storage system redefines the boundaries of energy availability. A Kompatibilitätsliste for suitable inverters for Pylontech batteries with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our attachments! (Pylontech Compatibility List) The Force H1 system contains Pylontech Force-H1 3.55 kWh 48v storage (2-7 modules depending on selection) Pylontech Force-H1 control unit bms 3.5m DC cable set RJ45 data cable Mounting screws Operating instructions The Force-H1 series: LiFePO4 storage technology Cycle life: over 5000 at 95% DoD Dual active protection at bms level High charging and discharging capacity possible Pre-charging function to protect the ESS system from overvoltage function Reliable performance thanks to durable components Flexibly expandable Compact and space-saving Service life over 15 years Compatible with many available inverters Easy installation thanks to modular design Flexible expansion With the Force-H1 series, the flexible configuration of the capacity comes to the fore. This can be expanded from 7.1 kWh to 24.86 kWh per tower. A total of up to 6 battery towers are possible. The modular design is simple and therefore allows easy installation with uncomplicated connection of the cables. Another advantage of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Thanks to its versatile and space-saving use, the Force H1 series is suitable for a wide range of application scenarios. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech Force-H1 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Optimum coverage of self-consumption In residential buildings, the energy demand is higher in the morning and evening, while the solar energy generated only reaches its maximum value at midday. The battery storage systems in the Force series from Pylontech compensate for this difference between consumption and generation of electrical energy. Even a small battery storage system with a capacity of up to 15 kWh can noticeably optimize self-consumption in a multi-person household and counteract the constantly rising cost of electricity. Larger storage systems enable a longer service life by specifically reducing the depth of discharge or increase the reserves in the event of a cloudy day or power outage. Intuitive control panel with LED displays The control panel on the control unit makes it possible to check the current status of the battery tower at any time. The panel also allows the communication speed (baud rate) to be set directly on the unit. Technical data Force-H1 bms Dimensions: 600 x 380 x 150 mm Weight: 14 kg Manufacturer part number: FC0500-40S-V2 The Force-H1 bms protects against: Deep discharge and overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Technical data Force-H1 battery Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48v DC Storage capacity: 3552 Wh Communication: can, Modbus Weight: 36 kg Dimensions: 600 x 380 x 170 Protection class: IP55 Operating temperature range: 0 - +50°C Storage temperature range: -20°C - +60°C Warranty: 15-year manufacturer's warranty Certification: vde2510-50,iec62619, iec62477-1, iec62040-1, cec, CE, UN38.8 Due to the classification as dangerous goods, this product will be shipped by a forwarding agent!

The Pylontech H1 storage system embodies the future of energy storage. With a modular design, it redefines versatility. From 7.1 kWh to a maximum 149.1 kWh capacity, the stackable high voltage system offers flexible configurations that seamlessly adapt to your needs. The redesign of this system simplifies installation with effortless connections, saving installers valuable time. Whether for indoor or outdoor use, the H1 storage system is synonymous with reliability and safety. With the ability to connect up to 7 systems to one bms and 6 battery towers in parallel, the Pylontech H1 storage system redefines the boundaries of energy availability. A Kompatibilitätsliste for suitable inverters for Pylontech batteries with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our attachments! (Pylontech Compatibility List) The Force H1 system contains Pylontech Force-H1 3.55 kWh 48v storage (2-7 modules depending on selection) Pylontech Force-H1 control unit bms 3.5m DC cable set RJ45 data cable Mounting screws Operating instructions The Force-H1 series: LiFePO4 storage technology Cycle life: over 5000 at 95% DoD Dual active protection at bms level High charging and discharging capacity possible Pre-charging function to protect the ESS system from overvoltage function Reliable performance thanks to durable components Flexibly expandable Compact and space-saving Service life over 15 years Compatible with many available inverters Easy installation thanks to modular design Flexible expansion With the Force-H1 series, the flexible configuration of the capacity comes to the fore. This can be expanded from 7.1 kWh to 24.86 kWh per tower. A total of up to 6 battery towers are possible. The modular design is simple and therefore allows easy installation with uncomplicated connection of the cables. Another advantage of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Thanks to its versatile and space-saving use, the Force H1 series is suitable for a wide range of application scenarios. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech Force-H1 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Optimum coverage of self-consumption In residential buildings, the energy demand is higher in the morning and evening, while the solar energy generated only reaches its maximum value at midday. The battery storage systems in the Force series from Pylontech compensate for this difference between consumption and generation of electrical energy. Even a small battery storage system with a capacity of up to 15 kWh can noticeably optimize self-consumption in a multi-person household and counteract the constantly rising cost of electricity. Larger storage systems enable a longer service life by specifically reducing the depth of discharge or increase the reserves in the event of a cloudy day or power outage. Intuitive control panel with LED displays The control panel on the control unit makes it possible to check the current status of the battery tower at any time. The panel also allows the communication speed (baud rate) to be set directly on the unit. Technical data Force-H1 bms Dimensions: 600 x 380 x 150 mm Weight: 14 kg Manufacturer part number: FC0500-40S-V2 The Force-H1 bms protects against: Deep discharge and overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Technical data Force-H1 battery Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48v DC Storage capacity: 3552 Wh Communication: can, Modbus Weight: 36 kg Dimensions: 600 x 380 x 170 Protection class: IP55 Operating temperature range: 0 - +50°C Storage temperature range: -20°C - +60°C Warranty: 15-year manufacturer's warranty Certification: vde2510-50,iec62619, iec62477-1, iec62040-1, cec, CE, UN38.8 Due to the classification as dangerous goods, this product will be shipped by a forwarding agent!

The Pylontech H1 storage system embodies the future of energy storage. With a modular design, it redefines versatility. From 7.1 kWh to a maximum 149.1 kWh capacity, the stackable high voltage system offers flexible configurations that seamlessly adapt to your needs. The redesign of this system simplifies installation with effortless connections, saving installers valuable time. Whether for indoor or outdoor use, the H1 storage system is synonymous with reliability and safety. With the ability to connect up to 7 systems to one bms and 6 battery towers in parallel, the Pylontech H1 storage system redefines the boundaries of energy availability. A Kompatibilitätsliste for suitable inverters for Pylontech batteries with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our attachments! (Pylontech Compatibility List) The Force H1 system contains Pylontech Force-H1 3.55 kWh 48v storage (2-7 modules depending on selection) Pylontech Force-H1 control unit bms 3.5m DC cable set RJ45 data cable Mounting screws Operating instructions The Force-H1 series: LiFePO4 storage technology Cycle life: over 5000 at 95% DoD Dual active protection at bms level High charging and discharging capacity possible Pre-charging function to protect the ESS system from overvoltage function Reliable performance thanks to durable components Flexibly expandable Compact and space-saving Service life over 15 years Compatible with many available inverters Easy installation thanks to modular design Flexible expansion With the Force-H1 series, the flexible configuration of the capacity comes to the fore. This can be expanded from 7.1 kWh to 24.86 kWh per tower. A total of up to 6 battery towers are possible. The modular design is simple and therefore allows easy installation with uncomplicated connection of the cables. Another advantage of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Thanks to its versatile and space-saving use, the Force H1 series is suitable for a wide range of application scenarios. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech Force-H1 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Optimum coverage of self-consumption In residential buildings, the energy demand is higher in the morning and evening, while the solar energy generated only reaches its maximum value at midday. The battery storage systems in the Force series from Pylontech compensate for this difference between consumption and generation of electrical energy. Even a small battery storage system with a capacity of up to 15 kWh can noticeably optimize self-consumption in a multi-person household and counteract the constantly rising cost of electricity. Larger storage systems enable a longer service life by specifically reducing the depth of discharge or increase the reserves in the event of a cloudy day or power outage. Intuitive control panel with LED displays The control panel on the control unit makes it possible to check the current status of the battery tower at any time. The panel also allows the communication speed (baud rate) to be set directly on the unit. Technical data Force-H1 bms Dimensions: 600 x 380 x 150 mm Weight: 14 kg Manufacturer part number: FC0500-40S-V2 The Force-H1 bms protects against: Deep discharge and overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Technical data Force-H1 battery Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48v DC Storage capacity: 3552 Wh Communication: can, Modbus Weight: 36 kg Dimensions: 600 x 380 x 170 Protection class: IP55 Operating temperature range: 0 - +50°C Storage temperature range: -20°C - +60°C Warranty: 15-year manufacturer's warranty Certification: vde2510-50,iec62619, iec62477-1, iec62040-1, cec, CE, UN38.8 Due to the classification as dangerous goods, this product will be shipped by a forwarding agent!

The Pylontech H1 storage system embodies the future of energy storage. With a modular design, it redefines versatility. From 7.1 kWh to a maximum 149.1 kWh capacity, the stackable high voltage system offers flexible configurations that seamlessly adapt to your needs. The redesign of this system simplifies installation with effortless connections, saving installers valuable time. Whether for indoor or outdoor use, the H1 storage system is synonymous with reliability and safety. With the ability to connect up to 7 systems to one bms and 6 battery towers in parallel, the Pylontech H1 storage system redefines the boundaries of energy availability. A Kompatibilitätsliste for suitable inverters for Pylontech batteries with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our attachments! (Pylontech Compatibility List) The Force H1 system contains Pylontech Force-H1 3.55 kWh 48v storage (2-7 modules depending on selection) Pylontech Force-H1 control unit bms 3.5m DC cable set RJ45 data cable Mounting screws Operating instructions The Force-H1 series: LiFePO4 storage technology Cycle life: over 5000 at 95% DoD Dual active protection at bms level High charging and discharging capacity possible Pre-charging function to protect the ESS system from overvoltage function Reliable performance thanks to durable components Flexibly expandable Compact and space-saving Service life over 15 years Compatible with many available inverters Easy installation thanks to modular design Flexible expansion With the Force-H1 series, the flexible configuration of the capacity comes to the fore. This can be expanded from 7.1 kWh to 24.86 kWh per tower. A total of up to 6 battery towers are possible. The modular design is simple and therefore allows easy installation with uncomplicated connection of the cables. Another advantage of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Thanks to its versatile and space-saving use, the Force H1 series is suitable for a wide range of application scenarios. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech Force-H1 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Optimum coverage of self-consumption In residential buildings, the energy demand is higher in the morning and evening, while the solar energy generated only reaches its maximum value at midday. The battery storage systems in the Force series from Pylontech compensate for this difference between consumption and generation of electrical energy. Even a small battery storage system with a capacity of up to 15 kWh can noticeably optimize self-consumption in a multi-person household and counteract the constantly rising cost of electricity. Larger storage systems enable a longer service life by specifically reducing the depth of discharge or increase the reserves in the event of a cloudy day or power outage. Intuitive control panel with LED displays The control panel on the control unit makes it possible to check the current status of the battery tower at any time. The panel also allows the communication speed (baud rate) to be set directly on the unit. Technical data Force-H1 bms Dimensions: 600 x 380 x 150 mm Weight: 14 kg Manufacturer part number: FC0500-40S-V2 The Force-H1 bms protects against: Deep discharge and overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Technical data Force-H1 battery Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48v DC Storage capacity: 3552 Wh Communication: can, Modbus Weight: 36 kg Dimensions: 600 x 380 x 170 Protection class: IP55 Operating temperature range: 0 - +50°C Storage temperature range: -20°C - +60°C Warranty: 15-year manufacturer's warranty Certification: vde2510-50,iec62619, iec62477-1, iec62040-1, cec, CE, UN38.8 Due to the classification as dangerous goods, this product will be shipped by a forwarding agent!