Pylontech Powercube x1 v2 4.8kWh storage set h48050 with bms sc500-100s

The Powercube x1 v2 high-voltage battery storage set from Pylontech is characterized by its modular and stackable design, which makes the system highly adaptable and can be expanded to up to 16.8kWh in a tower if required. A battery tower can be set up with a minimum of 2 to a maximum of 10 h48050 high-voltage battery modules. Each module has a capacity of 2.4 kWh and is connected in series. The system is only complete with the sc500-100s battery management system with additional connection cable set. If several towers are to be put into operation together, the Mbms control module is available as an option. Caution: The Powercube does not have a soft start circuit!

One Kompatibilitätsliste for Pylontech with over 30 brands and companies, including Victron Energy, Growatt, Solis and many more, can be found as a download in our appendices! (Pylontech Compatibility List)

The Powercube x1 v2 series:

• >5000 cycles at 90% DoD
• LiFePO4 cell technology
• High cycle stability and long service life
• Expandable from 4.8kWh to 24kWh capacity
• Automatic management of charging and discharging current
• Self-cooling mode reduces system noise
• Low self-discharge, no memory effect
• Flexible and stackable
• Very low failure rate
• Comprehensive protection and monitoring functions

Powercube x1 high-voltage battery module h48050

The h48050 (v2) battery module from Pylontech is a high-voltage storage system with LiFePO4 cell technology and offers you a very long service life with high cycle stability. The flexible and stackable concept enables flexible application for different scenarios and is very easy to install. With a nominal voltage of 48v and a capacity of 2.4 kWh, the battery offers you outstanding performance under high loads.

High cycle life

The Pylontech h48050 battery modules are an ideal storage solution for photovoltaic systems due to their extremely long cycle life and the use of LiFePo4 cells. Regardless of whether it is a grid-connected or off-grid system, the Powercube x1 storage system offers numerous advantages compared to conventional lead batteries and other lithium technologies.

Technical data:

• Battery chemistry: LiFePO4
• Capacity: 2.4 kWh
• Nominal voltage: 48v
• Operating voltage range: 45-54V
• Nominal capacity: 50 Ah
• Max. Charging current: 50A
• Discharge depth: 90%
• Communication: RS232/CAN
• Protection class: IP20
• Weight: 24 kg
• Operating temperature range: 0°C - +50°C
• Storage temperature: -20°C - +60°C
• Dimensions: 442 x 390 x 100 mm
• Certificate: TÜV (iec62619), UN38.3

bms control unit

The SC0500-100S-v2 from Pylontech acts as a central unit for monitoring and controlling the latest generation. The bms forms an important part of the Powercube x1 high-voltage battery system and enables seamless communication with compatible inverters. To complete the entire system, a further 2-10 battery modules can be connected in addition to the bms, with each high-voltage battery having a capacity of 2.4 kWh. These are connected in series to form a battery tower with a control unit, which can have a maximum capacity of 24kWh. If several towers are to be connected in parallel, one control unit is required per tower.

The Powercube x1 control unit protects against:

• Deep discharge and overcharging
• overvoltage during charging
• currents too high during charging and discharging
• over- and undertemperature
• Short circuit and reverse polarity

monitoring functions:

• Operation recording
• Current
• Voltage
• Temperature
• State of charge

Technical data:

• Operating voltage range: 60~600V
• Max. Charging/discharging current: 100A
• Protection class: IP20
• Power consumption: 8W
• Operating temperature range: -20°C - +65°C
• Storage temperature range: -40°C - +80°C
• Communication: Modbus RTU/CAN
• Dimensions. 442 x 390 x 132 mm
• Weight: 8.5 kg

Scope of delivery:

2-10x Pylontech Powerube x1 v2 high-voltage storage system 2.4kWh (depending on selection)
1x Pylontech Powercube x1 v2 control unit bms
1x connection cable set