Jinko Tiger Neo 415W Solar Panel Mono N-Type Blackframe

Robust and versatile connection cable The cable is suitable for connecting a battery with M8 round terminals to a device that also has an M8 screw terminal. This includes the following device classes, among others: Victron Energy Phoenix inverter Victron Energy Inverter / charger combination All other devices such as charge controllers, inverteres or battery chargers which have an M8 screw terminal and are to be connected to a battery with the same terminal Features Length: 1m Connections: M8 -> M8 Wire cross section: 35mm² Wire Color: red / black Suitable for installation in dry and damp rooms, as well as vehicles Suitable for applications with medium mechanical stress Oil, cold and UV resistant, flame retardant Note and accessories redommendation To select the correct connection cable, always follow instructions in the operation manual of the device to be connected. The cable cross-section should be selectecd so that the power loss is max. 2%. In our online store you will find additional accessoires such as  Mega fuse holders and Mega-Fuses. Scope of delivery: Battery connection cable 35mm² - 2 single wires red / black 1m

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional Tools. The cable is manufactured in our factory in Lower Bavaria. Details: suitable for 24V-systems or higher length: 10m MC4-connectors 6mm conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

3m 6mm² MC4 extension cable (MC4 plug and socket). The cable is manufactured in our factory in Lower Bavaria. The plugs themselves are also German originals from MutliContact. We use high-quality special tools and thus ensure an extremely strong connection that can withstand even very harsh conditions and that is not affected by the weather over a very long period of time. Scope of application ideal for flexible cabling of solar modules on different roof sides or module rows for the parallel connection of solar modules Benefit Plug and play, unpack and use, no specialist tools required Available in different lengths and colours and therefore suitable for almost any task Technical data max. voltage: 1000V Cable length: 3m Equipment: 1 MC4 male + 1x MC4 female  

1.5m 6mm² MC4 extension cable (MC4 plug and socket). The cable is manufactured in our factory in Lower Bavaria. The plugs themselves are also German originals from MutliContact. We use high-quality special tools and thus ensure an extremely strong connection that can withstand even very harsh conditions and that is not affected by the weather over a very long period of time. Scope of application ideal for flexible cabling of solar modules on different roof sides or module rows for the parallel connection of solar modules Benefit Plug and play, unpack and insert, no specialist tools required Available in different lengths and colours and therefore suitable for almost any task Technical data max. voltage: 1000V Cable length: 1.5m Equipment: 1 MC4 male + 1x MC4 female

The Victron Lynx Distributor (mpn lyn060102000) is a modular DC busbar with provisions for four DC fuses. It monitors the status of each fuse and displays their respective states via a led on the front panel. The Lynx Distributor contains one positive and one negative busbar and provides a connection for 4 individual DC device circuits, loads or DC groups. It provides space for individual DC fuses per DC group. Features of the Victron Lynx Distributor Connection for four individual DC device circuits, loads or groups Positive and negative busbar MEGA fuses easy installation Part of the Lynx modular distribution system Fuse display leds If you wish to use the fuse indicator leds on the Lynx Distributor, a connection to a Lynx Shunt is also required. The Lynx Shunt contains the required wide input power supply (8v - 70v dc) to output the required 5v (4.5v - 5.5v) current requirement of the Lynx Distributor PCB. The RJ11 cable required for connection is included. The Lynx Shunt has two ports, either of which can be used. When fully functional, only the central led will be green. If a fuse is blown (or missing), the leds of the central and fuse circuits will light red. If you are not using all the connection points in your DC distribution, dummy fuses may need to be fitted to clear the red leds. Fuses The Lynx distributor uses MEGA fuses. Please note that some MEGA fuses are rated for 36v only (suitable for 24V systems). For 48v systems, fuses rated at 58/64v must be used. Scope of delivery: 1x Victron Lynx Distributor 1x RJ11 cable

Robust and versatile battery connection cable The cable is suitable for connecting a battery with m8 round terminals to a device that also has an m8 screw terminal. This includes, among others, the following device classes: Victron Energy Phoenix inverter Victron Energy inverter / charger combination All other devices such as charge controllers, inverters or battery chargers which have an m8 display terminal and are to be connected to a battery with the same terminal Features Length: 1m Connections: m8 -> m8 Wire cross section: 50mm² Wire color: red / black Suitable for installation in dry and damp rooms, as well as vehicles Suitable for applications with medium mechanical stress oil, cold and UV resistant, flame retardant Note and accessories Recommendation To select the correct connection cable, always follow instructions in the operating manual of the device to be connected. The cable cross-section should be selected so that the power loss is max. 2%. In our online store you will find further accessories like Mega fuse holder and Mega fuses Scope of delivery: Battery connection cable 50mm² - 2 single wires red / black 1m

The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands placed on a solar accumulator today. Maximum safety and a long service life are guaranteed even with regular deep discharge thanks to the latest technology. The latest battery of the market-leading manufacturer with now 3.5 kWh per module has again a battery management system (bms) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters. Features Extremely cycle resistant - over 6000 cycles at 95% DoD More usable energy content than the previous model US3000 Lifetime over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging power possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharge overvoltage during charging excessive currents during charging and discharging over and under temperature Short circuit and reverse polarity Constant monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS. High cycle life The extremely high cycle life of the installed LiFePo4 cells make Pylontech us3000c modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-connected or stand-alone, the Pylontech storage system offers several advantages over typical lead-acid batteries and other lithium technologies. Technical data Battery Type: Lithium Iron Phosphate (LiFePo4) Rated voltage: 48V Rated capacity: 3552 Wh Usable capacity (95% DoD): 3374 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 90A Max. (Discharge) charging current: 74A Recommended charge/discharge current: 37A Communication: rs485, CAN Weight: 32 kg Dimensions: 442 x 420 x 132 mm Protection class: IP20 Temperature range charge: 0°C - +50°C Temperature range discharge: -10°C - +50°C Temperature range storage: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 years manufacturer warranty Certification: TÜV, ce, UN38.8 Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1x Pylontech us3000c LiFePO4 3.5 kWh 1x cable set parallel connection incl. grounding 1x rj45 data cable 1x mounting screws 1x user manual

The end cap of Betterie (mpn bc01c) is used to close the unused 3 pole AC socket of the PV inverter of e.g. Envertech, Hoymiles or Huayu. Product features Suitable for 1-phase inverter from e.g. Envertech, Hoymiles or Huayu Closure of Betteri bc01 Female connector Dust and waterproof according to ip67 UV resistant - Suitable for indoor and outdoor mounting Scope of delivery: 1x Betteri Closure cap for bc01 socket