Lapp Mobility Wallbox Home Pro 11 kW 16a 1-phase type 2

The ev Charging Station ns 22 kW (mpn: evC200300200) from Victron Energy is a powerful e-vehicle charging station that you can operate in both 3-phase and 1-phase mode. It delivers an impressive 22 kW aC power in 3-phase mode, while a solid 7.3 kW is still available in 1-phase mode. Although technically identical to the ev Charging Station, the new version features a modern design, which is available in 3 different colors. Setup, configuration and monitoring are conveniently carried out from VictronConnect via Bluetooth and/or the integrated web interface, which can be accessed via a WiFi access point or WiFi LaN. Furthermore, a gx device can be integrated to allow remote control. It is particularly noteworthy that excess solar energy is used directly to charge your vehicle. Manual and timed modes offer additional flexibility to meet the requirements of the electric vehicle, the energy supply system and your general electric mobility. about the ev Charging Station ns Powerful e-vehicle charging station WLaN communication 1- or 3-phase operation Simple operation and control Via Bluetooth and VictronConnect app Illuminated ring for status display 3 operating modes available Optionally available colored fronts: Black White Operation. Control and display A single glance at the VictronConnect app or via Bluetooth gives you full control and an overview of all operating parameters and statistics. Furthermore, for remote monitoring, an optional Cerbo-gx Communication center can be used for remote monitoring. The charging station is equipped with a fully programmable RGB light ring around the charging port, which makes it possible to see the status of the device at a glance. Using the integrated web interface, this light ring can be individually configured to display different light effects according to the current status (disconnected, charging, in operation, etc.). Operating modes Manual mode to configure the output current: In manual mode, it is possible to configure the output current flexibly in the range from 6 to 32 a. The charging power can be controlled in various ways. Either via the web interface, from a gx device and VRM remote monitoring or via VictronConnect. In this way, it is easy to initiate or end the charging process manually as soon as a vehicle is connected to the charging station. Optional gx device for VRM remote monitoring: Victron gx Touch 50 display panel for Cerbo gx Victron gx Touch 70 display panel for Cerbo gx automatic mode to ensure maximum efficiency of the PV system: The charging station automatically detects when excess energy is available and uses only this to charge the vehicle. instead of energy loss that would occur if excess energy were lost, it is instead stored in the vehicle's battery. Timed mode for charging the vehicle at specific times: Thanks to a fully programmable timer, the vehicle can be charged at different times. For example, during the night when grid costs are lower. Technical data Input voltage range: 170-265v aC Nominal charging current: 32a / phase Rated power: 22 kW Current output range: 6-32 a Self-consumption: 15 ma at 230 V Operating temperature range: -25°C - +50°C Storage temperature range: -40°C - +80°C Protection class: IP44 Weight: 3 kg dimensions: 372 x 292 x 122 mm Data communication: Modbus tcp via WLaN, Bluetooth Scope of delivery: 1x Victron Energy ev Charging Station ns 22 kW