Recommended
4 Results
Sorting
VAT-exempt delivery possible*
3-01-011070
Offgridtec® olp 100w solar panel 12v shingle technology perc
The Offgridtec olp 100w (mpn 3-01-011070) is a powerful 12v solar module with innovative overlapping design wafer assembly and features dimensions that almost reach the range of high power solar modules. The shingle arrangement of the wafers ensures optimal current flow due to minimized power losses and significantly higher module efficiency due to better space utilization. The PERC technology used improves light absorption and increases the power yield.
Unique selling points of the olp series of Offgridtec
Unique module design with overlapping wafer arrangement (overlapping design) ensures very high module efficiency through better area utilization and reduced power losses due to line resistances.
Modern, homogeneous appearance without visible conductor tracks.
Innovative PERC technology ensures improved absorption at longer wavelengths, e.g. at flat irradiation angles (early morning and evening) or in cloudy conditions
No hotspot hazard
Less loss in case of partial shading
Thanks to finishing according to overlapping design, the module has a footprint of just 988 x 560 x 30mm at a rated power of 100w. The cell efficiency is over 23%.
Innovative PERC technology
The PERC technology (Passivated Emitter Rear Cell) in the Offgridtec olp solar modules ensures a higher efficiency of the solar cells with its key technology. A dielectric layer is created on the back of the cell between the conventional aluminum metallization and the silicon wafer layer, which is provided with tiny holes by a laser. This dielectric layer reflects light, which penetrates to the back side without generating charge carriers, into the solar cell. The reflection gives the photons a "second chance" to generate electricity. In addition to higher efficiency at different wavelengths and the increased likelihood that electrons will contribute to power, PERC technology contributes to lower system costs and an increase in area energy yield.
Technical Data
Generator output: 100Wp
System voltage: 12V/DC
Module voltage (Vmp): 18.7V
Max. Current (Imp): 5.53A
Open-circuit voltage (Voc): 22.1V
Short-circuit current (Isc): 5.67A
Max. System voltage: 1000V/DC
Cell type: monocrystalline PERC
Ambient temperature: -40°C to +85°C
Cell efficiency: >23
Dimensions: 988 x 560 x 30mm
Weight: 6.09 kg
Scope of delivery:
3-01-011070 Offgridtec® olp 100w 12v PERC overlapping solar panel 12v shingle technology
The Offgridtec olp 100w (mpn 3-01-011070) is a powerful 12v solar module with innovative overlapping design wafer assembly and features dimensions tha...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
The Offgridtec olp 100w (mpn 3-01-011070) is a powerful 12v solar module with innovative overlapping design wafer assembly and features dimensions that almost reach the range of high power solar modules. The shingle arrangement of the wafers ensures optimal current flow due to minimized power losses and significantly higher module efficiency due to better space utilization. The PERC technology used improves light absorption and increases the power yield.
Unique selling points of the olp series of Offgridtec
Unique module design with overlapping wafer arrangement (overlapping design) ensures very high module efficiency through better area utilization and reduced power losses due to line resistances.
Modern, homogeneous appearance without visible conductor tracks.
Innovative PERC technology ensures improved absorption at longer wavelengths, e.g. at flat irradiation angles (early morning and evening) or in cloudy conditions
No hotspot hazard
Less loss in case of partial shading
Thanks to finishing according to overlapping design, the module has a footprint of just 988 x 560 x 30mm at a rated power of 100w. The cell efficiency is over 23%.
Innovative PERC technology
The PERC technology (Passivated Emitter Rear Cell) in the Offgridtec olp solar modules ensures a higher efficiency of the solar cells with its key technology. A dielectric layer is created on the back of the cell between the conventional aluminum metallization and the silicon wafer layer, which is provided with tiny holes by a laser. This dielectric layer reflects light, which penetrates to the back side without generating charge carriers, into the solar cell. The reflection gives the photons a "second chance" to generate electricity. In addition to higher efficiency at different wavelengths and the increased likelihood that electrons will contribute to power, PERC technology contributes to lower system costs and an increase in area energy yield.
Technical Data
Generator output: 100Wp
System voltage: 12V/DC
Module voltage (Vmp): 18.7V
Max. Current (Imp): 5.53A
Open-circuit voltage (Voc): 22.1V
Short-circuit current (Isc): 5.67A
Max. System voltage: 1000V/DC
Cell type: monocrystalline PERC
Ambient temperature: -40°C to +85°C
Cell efficiency: >23
Dimensions: 988 x 560 x 30mm
Weight: 6.09 kg
Scope of delivery:
3-01-011070 Offgridtec® olp 100w 12v PERC overlapping solar panel 12v shingle technology
Shipped in 1-3 days
VAT-exempt delivery possible*
3-01-010766
Offgridtec fsp-2 225w ultra kit mppt 15a
The fsp-2 225w ultra kit 12v is a combination of the foldable 225w fsp-2 solar panel and smart latest generation mppt controller. The fsp-2 225w is one of the newest models in the family and also one of the most powerful foldable solar modules currently available. It has a 2-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged.
When it comes to charging technology, we rely on the high-quality Victron Smart-Solar 75/15 charge controller for the fsp-2 225w kit mppt. A high quality device which can be conveniently controlled via Bluetooth and a free app and is also equipped with a 15a load output for dc consumers. The connection kit is housed in a lockable bag, directly on the module. So you always have a ready-to-use, small power plant at your side.
Performance that sets standards
The fsp-2 225w Ultra is equipped with American SPR back-contact cells from a well-known American manufacturer. The cells are completely black, which gives the fsp-2 225w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and, in combination with the low weight and compact dimensions of the fsp-2 panel, set new standards in this power class.
extensive application possibilities:
excellent usable in the camping area
or for expeditions, climbing tours and much more...
for vehicles and boats without fixed solar installation ...
and numerous other applications in different areas...
technical highlights fsp 2 225w ultra foldable solar panel
Rated power: 225wp, number of sides: 5 x 45 Wp
Dimensions closed: 560 x 440 x 20 mm, open designed: 560 x 2430 x 8 mm
Lightweight: only 6 kg weight
incl. mppt charge controller 75/15 15a and Bluetooth for configuration via free app
15a load output for dc 12v power consumers
equipped with high-end solar cells, made in USA
Module voltage (Vmp): 37,2V
max. charging current (Imp): 6,05A
Open circuit voltage (Voc): 43,7V
Short circuit current (Isc): 6,41A
6.0m 2x6mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side
0.5m 5mm² connecting cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller)
1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on battery side
Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fusethe supplied Profi-Connection Kit
The connection kit included in the scope of delivery provides everything needed for quick commissioning of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller.
For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse.
Including Victron SmartSolar mppt 75/15 charge controller
The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the BlueSolar 75/15, the Smart version has built-in Bluetooth, eliminating the need to purchase a Bluetooth dongle. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control.
The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices.
The most important technical features of the charge controller at a glance
15a load output
high peak efficiency of 98
freely programmable battery charging algorithm (via the free Victron Connect app)
Light dimming functions programmable (via the free Victron Connect app)
Ultra fast maximum power point tracking
max. PV open circuit voltage: 75V
Charging algorithm: multi-stage, adaptive
integrated Bluetooth module
Dimensions: 100 x 113 x 40 mm
Weight: 0,5 kg
customizable on request
All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred.
about the fsp-2 series
As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 225w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions.
Scope of delivery
1x Offgridtec FSP-2 225W 12V, 3-01-010765
1x Victron Energy scc075015060r Smartsolar mppt 75/15 15a 12v 24v solar charge Controller
1x 6m 2x6mm² module Connection Anderson SB50 connector
1x Offgridtec FSP-2 Connection-Kit
The fsp-2 225w ultra kit 12v is a combination of the foldable 225w fsp-2 solar panel and smart latest generation mppt controller. The fsp-2 225w is on...
Shipped in 1-3 days
Shipped in 1-3 days
3-01-010766
Offgridtec fsp-2 225w ultra kit mppt 15a
VAT-exempt delivery possible*
The fsp-2 225w ultra kit 12v is a combination of the foldable 225w fsp-2 solar panel and smart latest generation mppt controller. The fsp-2 225w is one of the newest models in the family and also one of the most powerful foldable solar modules currently available. It has a 2-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged.
When it comes to charging technology, we rely on the high-quality Victron Smart-Solar 75/15 charge controller for the fsp-2 225w kit mppt. A high quality device which can be conveniently controlled via Bluetooth and a free app and is also equipped with a 15a load output for dc consumers. The connection kit is housed in a lockable bag, directly on the module. So you always have a ready-to-use, small power plant at your side.
Performance that sets standards
The fsp-2 225w Ultra is equipped with American SPR back-contact cells from a well-known American manufacturer. The cells are completely black, which gives the fsp-2 225w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and, in combination with the low weight and compact dimensions of the fsp-2 panel, set new standards in this power class.
extensive application possibilities:
excellent usable in the camping area
or for expeditions, climbing tours and much more...
for vehicles and boats without fixed solar installation ...
and numerous other applications in different areas...
technical highlights fsp 2 225w ultra foldable solar panel
Rated power: 225wp, number of sides: 5 x 45 Wp
Dimensions closed: 560 x 440 x 20 mm, open designed: 560 x 2430 x 8 mm
Lightweight: only 6 kg weight
incl. mppt charge controller 75/15 15a and Bluetooth for configuration via free app
15a load output for dc 12v power consumers
equipped with high-end solar cells, made in USA
Module voltage (Vmp): 37,2V
max. charging current (Imp): 6,05A
Open circuit voltage (Voc): 43,7V
Short circuit current (Isc): 6,41A
6.0m 2x6mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side
0.5m 5mm² connecting cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller)
1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on battery side
Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fusethe supplied Profi-Connection Kit
The connection kit included in the scope of delivery provides everything needed for quick commissioning of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller.
For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse.
Including Victron SmartSolar mppt 75/15 charge controller
The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the BlueSolar 75/15, the Smart version has built-in Bluetooth, eliminating the need to purchase a Bluetooth dongle. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control.
The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices.
The most important technical features of the charge controller at a glance
15a load output
high peak efficiency of 98
freely programmable battery charging algorithm (via the free Victron Connect app)
Light dimming functions programmable (via the free Victron Connect app)
Ultra fast maximum power point tracking
max. PV open circuit voltage: 75V
Charging algorithm: multi-stage, adaptive
integrated Bluetooth module
Dimensions: 100 x 113 x 40 mm
Weight: 0,5 kg
customizable on request
All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred.
about the fsp-2 series
As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 225w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions.
Scope of delivery
1x Offgridtec FSP-2 225W 12V, 3-01-010765
1x Victron Energy scc075015060r Smartsolar mppt 75/15 15a 12v 24v solar charge Controller
1x 6m 2x6mm² module Connection Anderson SB50 connector
1x Offgridtec FSP-2 Connection-Kit
Shipped in 1-3 days
VAT-exempt delivery possible*
1-67-011325
Victron Smart BatteryProtect 12v/24v-65a
The Smart BatteryProtect 12/24v-65a from victron Energy (mpn bpr065022000) offers solid battery protection for 12v and 24v batteries of various types. Compared to the previous series, the Smart version has an integrated Bluetooth module that connects the Smart BatteryProtect (bp-65) to a smartphone or tablet. This allows you to program all the necessary on/off thresholds or set the appropriate value from 9 predefined thresholds. The BatteryProtect 12/24v can also be used as a charge interrupter between the battery charger and a lithium battery. A wide operating voltage range of 6-35 v make the device universally applicable. The possibility to connect an external switch or alarm to the BatteryProtect makes the bp-65 Smart the perfect battery monitor. Features of the Smart BatteryProtect 12v/24v-65A 65A maximum switching capacity For 12v and 24v batteries with automatic detection of the voltage range of the battery bank Explosion protection through integrated MOSFET switches that replace the relays, reducing the risk of sparking to zero integrated Bluetooth module, optionally disengageable freely programmable switch-on and switch-off thresholds, easily and wirelessly via the victronConnect app alternative programming and status display of settings possible via seven-segment display integrated alarm output, 9 predefined thresholds selectable external alarm, led or relay can be connected to the alarm output via relay the load shedding of the bp can be controlled by external events, which can not be programmed in this way Output for delayed alarm The alarm output is activated when the battery voltage drops below the preset value for shutdown for more than 12 seconds. Therefore, turning on the engine will not activate the alarm. The alarm output is a short-circuit protected open collector output connected to the negative (minus) rail. Max. Current 50 mA. The alarm output is normally used to activate an audible signal, led or relay. solid battery protection for any type of battery With its multiple configuration options, the Smart bp-65 is the perfect protection device for your battery, ensuring maximum lifetime, because most voltage converters or charge controllers have undervoltage protection, but this only intervenes at already quite low values which are usually in the range of 10.5v / 21v. The higher this cut-off threshold, the longer you will enjoy your batteries, which are usually quite costly. Selection of the shutdown threshold Depending on the battery type, there are different minimum battery voltages that must be maintained in order not to damage the battery. For AGM/Gel batteries we recommend to set the Batteryprotect to 11,5v cutoff threshold. For lithium batteries (LifePo4) 12.0v cut-off threshold is recommended. Depending on the purpose of the battery, it may be necessary to change these limits. Manufacturers also give different specifications for their batteries. Therefore, always check with the battery manufacturer which shutdown threshold is the right one for your battery! Scope of delivery: 1x victron Energy bpR065022000 Smart BatteryProtect 12/24v 65A 1x user manual
The Smart BatteryProtect 12/24v-65a from victron Energy (mpn bpr065022000) offers solid battery protection for 12v and 24v batteries of various types....
Shipped in 1-3 days
Shipped in 1-3 days
1-67-011325
Victron Smart BatteryProtect 12v/24v-65a
VAT-exempt delivery possible*
The Smart BatteryProtect 12/24v-65a from victron Energy (mpn bpr065022000) offers solid battery protection for 12v and 24v batteries of various types. Compared to the previous series, the Smart version has an integrated Bluetooth module that connects the Smart BatteryProtect (bp-65) to a smartphone or tablet. This allows you to program all the necessary on/off thresholds or set the appropriate value from 9 predefined thresholds. The BatteryProtect 12/24v can also be used as a charge interrupter between the battery charger and a lithium battery. A wide operating voltage range of 6-35 v make the device universally applicable. The possibility to connect an external switch or alarm to the BatteryProtect makes the bp-65 Smart the perfect battery monitor. Features of the Smart BatteryProtect 12v/24v-65A 65A maximum switching capacity For 12v and 24v batteries with automatic detection of the voltage range of the battery bank Explosion protection through integrated MOSFET switches that replace the relays, reducing the risk of sparking to zero integrated Bluetooth module, optionally disengageable freely programmable switch-on and switch-off thresholds, easily and wirelessly via the victronConnect app alternative programming and status display of settings possible via seven-segment display integrated alarm output, 9 predefined thresholds selectable external alarm, led or relay can be connected to the alarm output via relay the load shedding of the bp can be controlled by external events, which can not be programmed in this way Output for delayed alarm The alarm output is activated when the battery voltage drops below the preset value for shutdown for more than 12 seconds. Therefore, turning on the engine will not activate the alarm. The alarm output is a short-circuit protected open collector output connected to the negative (minus) rail. Max. Current 50 mA. The alarm output is normally used to activate an audible signal, led or relay. solid battery protection for any type of battery With its multiple configuration options, the Smart bp-65 is the perfect protection device for your battery, ensuring maximum lifetime, because most voltage converters or charge controllers have undervoltage protection, but this only intervenes at already quite low values which are usually in the range of 10.5v / 21v. The higher this cut-off threshold, the longer you will enjoy your batteries, which are usually quite costly. Selection of the shutdown threshold Depending on the battery type, there are different minimum battery voltages that must be maintained in order not to damage the battery. For AGM/Gel batteries we recommend to set the Batteryprotect to 11,5v cutoff threshold. For lithium batteries (LifePo4) 12.0v cut-off threshold is recommended. Depending on the purpose of the battery, it may be necessary to change these limits. Manufacturers also give different specifications for their batteries. Therefore, always check with the battery manufacturer which shutdown threshold is the right one for your battery! Scope of delivery: 1x victron Energy bpR065022000 Smart BatteryProtect 12/24v 65A 1x user manual
Shipped in 1-3 days
VAT-exempt delivery possible*
Preorder 10.05.2024
3-01-010515
Offgridtec BMS200M Solarkoffer 200W 12 V MPPT Regler
The Offgridtec bms200 12v solar case (010515) delivers a whopping 200w of solar power and comes as a complete solution ready for immediate use. The case is based on 2 high quality 100w mono solar panels and comes standard without charge controller - so you can use your preferred controller with the help of the connection cable kit. Furthermore, the case has 2 solid supports, for setting up the case. The supports can be easily and conveniently adjusted to the conditions of the ground via stainless steel wing nuts and optimally adjust the inclination to the sun. The high-quality connection cable set completes the system. It is based on extremely solid h07rnf rubber cables which defy even the most adverse conditions. The battery connection cable is equipped with alligator clips on the battery side, which you can safely and quickly clamp to the terminal of your battery. For additional safety, the integrated flat fuse holder which is equipped with a standard flat fuse from the automotive sector. This can be easily replaced if necessary. Features integrated aluminum elevation for floor installation integrated connection cable set for immediate use high quality mono solar cells - identical to the mono cells in our solar modules freely adjustable tilt angle for optimal yield at any time of the year comfortable black anodized carrying handle with fabric cover including bag for safe transport of your mobile power plant Technical data Solar power: 200wp max. charging current (Imp): 10.10A Voltage (vmp): 19.8v HAN: 010515 Model: bms200 Dimensions opened (without elevation): 1360 x 780 x 35 mm (LxWxH) Dimensions closed: 680 x 780 x 70mm (LxWxH) Weight: 15Kg 2x Offgridtec® 100w mono 12v solar panel - Manufacturer Offgridtec - Generator power (wp): 100 wp - Module voltage (vmp): 19,8 v - max. current (imp): 2x 5,05 A - Open circuit voltage (voc): 23,3 v - Short circuit current (Isc): 2x 5,46 A connection cable set - 6,0m 5mm² connection cable from solar case to solar charge controller with Anderson connector on solar side - 0,5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) - 0,5m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side for immediate use Scope of delivery: 1x Offgridtec bms200 solar case 200w 12 v 3-01-010515 1x connection cable set for charge controller (charge controller not included) and battery connection cable
The Offgridtec bms200 12v solar case (010515) delivers a whopping 200w of solar power and comes as a complete solution ready for immediate use. The ca...
Product is expected to be back in stock on 10 May 2024
Product is expected to be back in stock on 10 May 2024
VAT-exempt delivery possible*
Preorder 10.05.2024
The Offgridtec bms200 12v solar case (010515) delivers a whopping 200w of solar power and comes as a complete solution ready for immediate use. The case is based on 2 high quality 100w mono solar panels and comes standard without charge controller - so you can use your preferred controller with the help of the connection cable kit. Furthermore, the case has 2 solid supports, for setting up the case. The supports can be easily and conveniently adjusted to the conditions of the ground via stainless steel wing nuts and optimally adjust the inclination to the sun. The high-quality connection cable set completes the system. It is based on extremely solid h07rnf rubber cables which defy even the most adverse conditions. The battery connection cable is equipped with alligator clips on the battery side, which you can safely and quickly clamp to the terminal of your battery. For additional safety, the integrated flat fuse holder which is equipped with a standard flat fuse from the automotive sector. This can be easily replaced if necessary. Features integrated aluminum elevation for floor installation integrated connection cable set for immediate use high quality mono solar cells - identical to the mono cells in our solar modules freely adjustable tilt angle for optimal yield at any time of the year comfortable black anodized carrying handle with fabric cover including bag for safe transport of your mobile power plant Technical data Solar power: 200wp max. charging current (Imp): 10.10A Voltage (vmp): 19.8v HAN: 010515 Model: bms200 Dimensions opened (without elevation): 1360 x 780 x 35 mm (LxWxH) Dimensions closed: 680 x 780 x 70mm (LxWxH) Weight: 15Kg 2x Offgridtec® 100w mono 12v solar panel - Manufacturer Offgridtec - Generator power (wp): 100 wp - Module voltage (vmp): 19,8 v - max. current (imp): 2x 5,05 A - Open circuit voltage (voc): 23,3 v - Short circuit current (Isc): 2x 5,46 A connection cable set - 6,0m 5mm² connection cable from solar case to solar charge controller with Anderson connector on solar side - 0,5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) - 0,5m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side for immediate use Scope of delivery: 1x Offgridtec bms200 solar case 200w 12 v 3-01-010515 1x connection cable set for charge controller (charge controller not included) and battery connection cable
Product is expected to be back in stock on 10 May 2024