The FSP-Max 400W from Offgridtec (MPN 014560) is a foldable high-end solar module with connection kit, as well as permanently integrated fold-out supports to enable the module to be set up easily and anywhere at a 45 degree angle. The module is equipped with high-efficiency monocrystalline PERC solar cells with an efficiency of over 23%, delivering a full 400Wp of solar power in optimum orientation and sunshine. The combination of the compact dimensions when closed and the low total weight of just under 13kg sets new standards in terms of the flexibility and efficiency of mobile solar modules. This makes it flexible and easy to supply mobile or permanently installed energy storage systems. The solution for solar-supported, mobile battery charging: In the camping area For expeditions For vehicles and boats without a fixed solar installation For off-grid power supply at home And numerous other applications in a wide variety of areas Important properties: High output power Compatible with various 1-2.5 kWh mobile power stations Made from high-quality polymer composite material Quick to set up and connect Cell efficiency of over 23% Compact dimensions With practical carrying handle and protective bag Solar module protection class: IP65 Cabling (Anderson) protection class: IP20 Simple and can be used anywhere Four feet are permanently attached to the solar case, which can be easily folded out if required to place the panel on the ground at a sharp 45 degrees. This means that the module is fully assembled and ready for use within a minute. The angled orientation ensures an ideal solar yield. In combination with the low weight, the folding module with its compact dimensions and practical carrying handle is suitable for many different applications and is ready for use quickly and easily. The professional connection kit supplied The connection kit included in the scope of delivery contains everything you need to quickly commission the mobile solar module. It has a 6m connection cable with a high-quality Anderson plug connector at one end. A second 0.5 metre connection cable is also supplied, which is screwed directly to the solar input of your charge controller and is fitted with the corresponding Anderson plug on the other end. This allows you to connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. A 1 metre long Plug&Play connection cable is also included for connecting the charge controller to your battery. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be easily connected to all standard battery terminals. The battery cable also has a flat fuse holder with corresponding fuse. The 6 metre connection cable can also be used to connect to a suitable power station (with integrated charge controller) using a suitable adapter. The cabling has protection class IP20. If MC4 plugs are crimped (on request), the protection class increases to the next possible part. (estimated at IP44) Technical data: Nominal power (Pmax): 400Wp (4x100W) Module voltage (Vmp): 36.5V Module current max. (Imp): 10.96A Open circuit voltage (Voc): 43.1V Short-circuit current (Isc): 11.62A Max. System voltage: 200V/DC Cell efficiency: 23.4% Cell type: MONO-PERC Weight: 12.6kg Dimensions closed: 900 x 590 x 90 mm Dimensions open: 900 x 2362 x 22.5 mm Scope of delivery: 1x Offgridtec FSP-Max 400W foldable solar module 1x Profi-Connection Kit 1x protective bag

The fsp-2 225w 12v is the largest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in the range. It has a 5-sided design and comes with a matching connection kit, which allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. The fsp-2 225w 12v can be ordered in three variants. Offgridtec is also happy to customize any fsp module in terms of cable set and charging technology on request. The connection kit is stored in a lockable bag, directly on the module. So you always have a ready to use small power plant at your side. Performance that sets standards The fsp-2 225w Ultra is equipped with American SPR back-contact cells from a well-known manufacturer. The cells are completely black, which gives the fsp-2 225w a very modern, high-quality look. The SPR cells provide a very high efficiency of the panel and set in combination with the low weight and compact dimensions of the fsp-2 panel new standards in this power class. extensive application possibilities: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... technical highlights fsp 2 225w ultra foldable solar panel Rated power: 225wp Number of sides: 5 x 45 Wp Module voltage (Vmp): 37,2V Max. Charge current (Imp): 6,05A Open circuit voltage (Voc): 43,7V Short circuit current (Isc): 6,41A Dimensions closed: 560 x 440 x 20 mm Dimensions open designed: 560 x 2430 x 8 mm Weight: 6 kg ETFE coating SunPower high performance cells 6.0m 2x6mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse the included Profi-Connection Kit The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal alligator clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 225w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp 2 series is coated with ETFE for better protection and very high light transmission. Furthermore, we produce our solar modules according to current norms and standards, which together with the high quality materials makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec FSP-2 225W 12/24V, 3-01-010765 1x 6m 2x6mm² module connection with Anderson SB50 connector 1x Offgridtec FSP-2 Connection-Kit

The fsp-2 225w ultra kit 12v is a combination of the foldable 225w fsp-2 solar panel and smart latest generation mppt controller. The fsp-2 225w is one of the newest models in the family and also one of the most powerful foldable solar modules currently available. It has a 2-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. When it comes to charging technology, we rely on the high-quality Victron Smart-Solar 75/15 charge controller for the fsp-2 225w kit mppt. A high quality device which can be conveniently controlled via Bluetooth and a free app and is also equipped with a 15a load output for dc consumers. The connection kit is housed in a lockable bag, directly on the module. So you always have a ready-to-use, small power plant at your side. Performance that sets standards The fsp-2 225w Ultra is equipped with American SPR back-contact cells from a well-known American manufacturer. The cells are completely black, which gives the fsp-2 225w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and, in combination with the low weight and compact dimensions of the fsp-2 panel, set new standards in this power class. extensive application possibilities: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... technical highlights fsp 2 225w ultra foldable solar panel Rated power: 225wp, number of sides: 5 x 45 Wp Dimensions closed: 560 x 440 x 20 mm, open designed: 560 x 2430 x 8 mm Lightweight: only 6 kg weight incl. mppt charge controller 75/15 15a and Bluetooth for configuration via free app 15a load output for dc 12v power consumers equipped with high-end solar cells, made in USA Module voltage (Vmp): 37,2V max. charging current (Imp): 6,05A Open circuit voltage (Voc): 43,7V Short circuit current (Isc): 6,41A 6.0m 2x6mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connecting cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fusethe supplied Profi-Connection Kit The connection kit included in the scope of delivery provides everything needed for quick commissioning of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. Including Victron SmartSolar mppt 75/15 charge controller The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the BlueSolar 75/15, the Smart version has built-in Bluetooth, eliminating the need to purchase a Bluetooth dongle. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control. The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. The most important technical features of the charge controller at a glance 15a load output high peak efficiency of 98 freely programmable battery charging algorithm (via the free Victron Connect app) Light dimming functions programmable (via the free Victron Connect app) Ultra fast maximum power point tracking max. PV open circuit voltage: 75V Charging algorithm: multi-stage, adaptive integrated Bluetooth module Dimensions: 100 x 113 x 40 mm Weight: 0,5 kg customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 225w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec FSP-2 225W 12V, 3-01-010765 1x Victron Energy scc075015060r Smartsolar mppt 75/15 15a 12v 24v solar charge Controller 1x 6m 2x6mm² module Connection Anderson SB50 connector 1x Offgridtec FSP-2 Connection-Kit

The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in the range. It has a 3-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. Performance that sets standards The fsp-2 195w Ultra is equipped with American SPR back-contact cells from a well-known manufacturer. The look of the cells is completely black, which also gives the fsp-2 180w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and set new standards in this power class in combination with the low weight and compact dimensions of the fsp-2 panel. extensive application possibilities: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... technical highlights fsp-2 195w ultra foldable solar panel Rated power: 195wp Number of sides: 3 x 69wp Module voltage (Vmp): 33,5 V Max. Charge current (Imp): 5,82 A Open circuit voltage (Voc): 39,4 V Short circuit current (Isc): 6,17 A Dimensions closed: 820 x 440 x 40 mm Dimensions open designed: 820 x 1545 x 6 mm Weight: 8,2 Kg ETFE coating SunPower high performance cells 6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse Including Victron SmartSolar 75/15 charge controller The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the Bluesolar 75/15, the Smart version has integrated Bluetooth, which eliminates the need to purchase a Bluetooth dongel. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control. The integrated Bluetooth in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices. The most important technical features at a glance 15a load output high peak efficiency of 98 freely programmable battery charging algorithm (via the free Victron Connect APP) Light dimming functions programmable (via the free Victron Connect APP) Ultra fast maximum power point tracking max. PV open circuit voltage: 75V Charging algorithm: multi-stage, adaptive integrated Bluetooth module Dimensions: 100 x 113 x 40 mm Weight: 0,5 kg The included Profi-Connection Kit The included connection kit provides everything needed to get the mobile solar set up and running quickly. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal alligator clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. Customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 195w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp 2 series is coated with ETFE for better protection and very high light transmission. Furthermore, we produce our solar modules according to current norms and standards, which together with the high quality materials makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec fsp-2 195w 12v, 3-01-012680 with Victron SmartSolar 75/15 mppt charge controller 1x Offgridtec fsp-2 connection kit  

The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in the range. It has a 3-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. Performance that sets standards The fsp-2 195w Ultra is equipped with American SPR back-contact cells from SunPower. The look of the cells is completely black, which also gives the fsp-2 195w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and set new standards in this power class in combination with the low weight and compact dimensions of the fsp-2 panel. extensive application possibilities: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... technical highlights fsp-2 195w ultra foldable solar panel Rated power: 195wp Number of sides: 3 x 65 Wp Module voltage (Vmp): 33,5 V Max. Charge current (Imp): 5,82 A Open circuit voltage (Voc): 39,4 V Short circuit current (Isc): 6,17 A Dimensions closed: 820 x 440 x 40 mm Dimensions open designed: 820 x 1545 x 60 mm Weight: 7,12 Kg ETFE coating SunPower high performance cells 6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse the included Profi-Connection Kit The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, high quality has been emphasized in the fsp-2 series. The fsp-2 195w works with highly effective solar cells. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is coated with ETFE coating, which provides better protection and at the same time ensures very high light transmittance. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec fsp-2 195w 12v, 3-01-012680 1x Offgridtec fsp-2 Connection-Kit

The fsp-2 180w ultra kit 12v is a combination of the foldable 180w fsp-2 solar panel and a smart latest generation mppt controller. The fsp-2 180w is one of the newest models in the family and also one of the most powerful foldable solar modules currently available. It has a 4-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. In terms of charging technology, we rely on the fsp-2 180w kit mppt on the high-quality Victron Smart-Solar 75/15 charge controller. A high quality device which can be conveniently controlled via Bluetooth and a free app and is also equipped with a 15a load output for dc consumers. The connection kit is housed in a lockable bag, directly on the module. So you always have a ready-to-use, small power plant at your side. Performance that sets standards The fsp-2 180w Ultra is equipped with American SPR back-contact cells from a well-known American manufacturer. The cells are completely black, which gives the fsp-2 180w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and, in combination with the low weight and compact dimensions of the fsp-2 panel, set new standards in this power class. Extensive range of applications: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... Technical Highlights fsp 2 180w Ultra Foldable Solar Panel Rated power: 180wp, number of sides: 4 x 45 Wp Dimensions closed: 560 x 440 x 30 mm, open designed: 560 x 1970 x 6 mm Lightweight: only 5.4 kg weight incl. mppt charge controller 75/15 15a and Bluetooth for configuration via free app 15a load output for dc 12v power consumers equipped with high-end solar cells, made in USA Module voltage (Vmp): 39.6 v, max. charge current (Imp): 4.55 A Open circuit voltage (Voc): 46.6 v, short circuit current (Isc): 4.81 A 6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0,5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse Including Victron SmartSolar 75/15 charge controller The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the BlueSolar 75/15, the Smart version has built-in Bluetooth, eliminating the need to purchase a Bluetooth dongle. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control. The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. The most important technical data at a glance 15a load output High peak efficiency of 98 Freely programmable battery charging algorithm (via the free Victron Connect app) Light dimming functions programmable (via the free Victron Connect app) Ultra fast maximum power point tracking Max. PV open circuit voltage: 75V Charging algorithm: multi-stage, adaptive Integrated Bluetooth module Dimensions: 100 x 113 x 40 mm Weight: 0,5 kg The included Profi-Connection Kit The included connection kit provides everything needed to get the mobile solar set up and running quickly. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal alligator clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. Customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 180w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 24% and are the best currently available on the market. In addition, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec FSP-2 180W 12V, 3-01-010760 1x Victron Energy scc075015060r Smartsolar mppt 75/15 15a 12v 24v solar charge controller 1x 6m 2x6mm² module Connection cable with Anderson SB50 connector 1x Ofgridtec FSP-2 Connection-Kit

The fsp-2 180w is one of the newest models in the fsp-2 family and is also one of the most powerful foldable solar modules in the range. It has a 4-sided design and comes with a matching connection kit, which allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. The fsp-2 180w can be ordered in three variants. Offgridtec is also happy to customize any fsp module in terms of cable set and charging technology on request. The connection kit is stored in a lockable bag, directly on the module. So you always have a ready to use small power plant at your side. Performance that sets standards The fsp-2 180w Ultra is equipped with American spr back-contact cells from a well-known manufacturer. The cells are completely black, which gives the fsp-2 180w a very modern, high-quality look. The spr cells provide a very high efficiency of the panel and set in conjunction with the low weight and compact dimensions of the fsp-2 panel new standards in this power class. extensive range of applications: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... technical highlights fsp 2 180w ultra foldable solar panel Rated power: 180wp Number of sides: 4 x 45 Wp Module voltage (Vmp): 39,6 V Max. Charge current (Imp): 4,55 A Open circuit voltage (Voc): 46,6 V Short circuit current (Isc): 4,81 A Dimensions closed: 560 x 440 x 30 mm Dimensions open designed: 560 x 1970 x 6 mm Weight: 5,4 kg ETFE coating SunPower high performance cells 6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse the included Profi-Connection Kit The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 180w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is provided with an ETFE coating, which ensures better protection and at the same time guarantees a very high light transmission. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec FSP-2 180W 12V, 3-01-010760 1x 6m 2x6mm² module Connection with Anderson SB50 connector 1x FSP-2 Connection Kit

The 100w solar bag from Offgridtec (mpn 012715) is a portable solar module and suitable for those who value flexibility. The module is foldable, lightweight and space-saving, making it suitable for many applications. It can be placed horizontally or at a 45° angle using the integrated supports to ensure the best possible solar yield. In good weather, the module can generate approximately 500-550Wh of energy per day. Due to the integrated usb-connectors in the handle, you can also charge small consumers without charge controller and battery. The Offgridtec solar bag is therefore the ideal companion for the spontaneous camping trip and the perfect addition to your outdoor equipment. Features Rated power: 100w High efficiency of 22.3% 2x usb 5v 2a connectors for direct charging Robust and water repellent fabric 5 meter connection cable with Anderson Powerpole connector 1.5 meter battery connection cable with 10a fuse Stand feet with ring eyelets Always ready for use You will achieve the greatest benefit with the solar bag in combination with a charge controller and a battery to store the generated energy. But also solo the foldable module is always ready for use. Through the two usb 5v connections you can charge your cell phone or other small consumers via usb directly at the module. The connections are located directly in the handle of the module, so it is ideal for the spontaneous camping trip. High quality workmanship The 100w solar bag from Offgridtec is both robust and space-saving, giving you a high degree of flexibility. The durable and water-resistant polyamide fabric makes the solar bag the ideal companion for camping trips. As with all Offgridtec solar modules, the solar bag is designed with high quality and durability in mind. We produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver top technical performance even under the most adverse conditions. Flexible alignability The Offgridtec solar pocket can be aligned to match the position of the sun at any time to generate optimal yields throughout the day. Thanks to the integrated supports, the module is positioned at a 45° angle and can thus capture the last rays of the sun even in spring and autumn, when conventional solar panels produce only low currents due to flat sun angles. Its light weight and integrated handles make it easy to transport and ready for use at any time. Technical data: Rated power: 100w Module voltage (Vmp): 20V Max. Charge current (Imp): 5.06A Open circuit voltage (Voc): 23.3V Short circuit current (Isc): 5.45A Cell efficiency: 22.3% Max. System voltage: 200 VDC Tolerance: ±3% Temperature coefficient: -0.38%/°C Dimensions closed: 605 x 535 x 45 mm Dimensions opened: 1200 x 535 x 22.5 mm Weight: 4.85 kg incl. carrying bag Connection Kit included Scope of delivery: 1x Offgridtec solar bag 100w 1x 5 meter connection cable with Anderson Powerpole plug 1x 1,5 meter battery connection cable with 10a fuse

The Offgridtec bms200 12v solar case (010515) delivers a whopping 200w of solar power and comes as a complete solution ready for immediate use. The case is based on 2 high quality 100w mono solar panels and comes standard without charge controller - so you can use your preferred controller with the help of the connection cable kit. Furthermore, the case has 2 solid supports, for setting up the case. The supports can be easily and conveniently adjusted to the conditions of the ground via stainless steel wing nuts and optimally adjust the inclination to the sun. The high-quality connection cable set completes the system. It is based on extremely solid h07rnf rubber cables which defy even the most adverse conditions. The battery connection cable is equipped with alligator clips on the battery side, which you can safely and quickly clamp to the terminal of your battery. For additional safety, the integrated flat fuse holder which is equipped with a standard flat fuse from the automotive sector. This can be easily replaced if necessary. Features integrated aluminum elevation for floor installation integrated connection cable set for immediate use high quality mono solar cells - identical to the mono cells in our solar modules freely adjustable tilt angle for optimal yield at any time of the year comfortable black anodized carrying handle with fabric cover including bag for safe transport of your mobile power plant Technical data Solar power: 200wp max. charging current (Imp): 10.10A Voltage (vmp): 19.8v HAN: 010515 Model: bms200 Dimensions opened (without elevation): 1360 x 780 x 35 mm (LxWxH) Dimensions closed: 680 x 780 x 70mm (LxWxH) Weight: 15Kg 2x Offgridtec® 100w mono 12v solar panel - Manufacturer Offgridtec - Generator power (wp): 100 wp - Module voltage (vmp): 19,8 v - max. current (imp): 2x 5,05 A - Open circuit voltage (voc): 23,3 v - Short circuit current (Isc): 2x 5,46 A connection cable set - 6,0m 5mm² connection cable from solar case to solar charge controller with Anderson connector on solar side - 0,5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) - 0,5m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side for immediate use Scope of delivery: 1x Offgridtec bms200 solar case 200w 12 v 3-01-010515 1x connection cable set for charge controller (charge controller not included) and battery connection cable

The fsp-2 135w Ultra is a foldable high-end solar panel with battery connection clamps as well as 3 integrated fold-out supports that allow you to easily set up the fsp-2 panel anywhere at a 45 degree angle. The fsp-2 Ultra is the successor of our mp-105w and is equipped with highly effective solar cells and provides a full 120w of solar power at optimal orientation and sunshine. Together with the very compact dimensions when folded and the low overall weight, the fsp-2 sets new standards in flexibility and efficiency among mobile, foldable solar modules. The price of the new Offgridtec fsp-2 Ultra also sets standards among comparable panels and stands up to any comparison. The basic solution for solar-assisted, mobile charging of batteries up to max. 200Ah: in the camping area for expeditions for vehicles and boats without fixed solar installation and numerous other applications in different areas Technical data foldable solar panel fsp-2 135w Ultra Rated power: 135wp Module voltage (Vmp): 19.8V Max. Charging current (Imp): 6,82A Open circuit voltage (Voc): 23.3V Short circuit current (Isc): 7,22A Charge controller: not included Dimensions closed: 560 x 440 x 20 mm Dimensions open designed: 560 x 1545 x 6 mm Weight: 4,8 kg ETFE coating SunPower high performance cells 6.0m 2x6mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0,5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse The included Profi-Connection Kit The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal alligator clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. Easy to set up thanks to 3 firmly integrated feet Three feet are sewn to the pocket of the fsp, which can be easily folded out to place the panel on the ground at an angle of 45 degrees. Thus, the module is fully assembled and ready for use within one minute. Customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, the fsp-2 series is designed with high quality in mind. The fsp-2 120 uses high performance solar cells from SunPower. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series has an ETFE coating, which provides better protection and at the same time ensures very high light transmission. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Lieferumfang: 1x Offgridtec FSP-2 135W 12V 1x 6m 2x6mm² modul Connection calbe with Anderson SB50 connector 1x Offgridtec FSP-2 Connection-Kit

The fsp-2 135w ultra mppt kit 12v is a combination of the foldable 135w fsp-2 solar panel and a latest generation smart mppt controller. The fsp-2 135w is one of the newest models in the family and also one of the most powerful foldable solar panels available. It has a 3-sided design and is delivered with a matching Connectino Kit with which you can quickly and easily establish a connection to the charge controller and the battery to be charged. In terms of charging technology, we rely on the fsp-2 135w kit mppt on the high-quality Victron Smart-Solar 75/15 charge controller. A high quality device which can be conveniently controlled via Bluetooth and a free app and is also equipped with a 15a load output for DC consumers. The connection kit is housed in a lockable bag, directly on the module. So you always have a ready-to-use, small power plant at your side. Performance that sets standards The fsp-2 135w Ultra is equipped with American SPR back-contact cells from a well-known manufacturer. The look of the cells is completely black, which additionally gives the fsp-2 135w a very modern, high-quality look. The SPR cells ensure a high efficiency of the panel and, in combination with the low weight and compact dimensions of the fsp-2 panel, set new standards in this power class. Extensive range of applications: Excellent for use in camping applications Or for expeditions, climbing tours, etc For vehicles and boats without fixed solar installation And numerous other applications in different areas Technical highlights fsp-2 135w solar panel Rated power: 135wp, number of sides: 3 x 45 Wp Dimensions closed: 560 x 440 x 20 mm; open designed: 560 x 1545 x 6 mm Weight module: 4,8 kg equipped with high-end solar cells Module voltage (Vmp): 19,8v - Max. Charge current (Imp): 6.82A Open circuit voltage (Voc): 23.3v - Short circuit current (Isc): 7.22A ETFE coating SunPower high power cells 6.0m 2x6mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse Including Victron SmartSolar mppt 75/15 charge controller The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the BlueSolar 75/15, the Smart version has built-in Bluetooth, eliminating the need to purchase a Bluetooth dongle. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control. The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. The most important technical features of the charge controller at a glance 15a load output high peak efficiency of 98 freely programmable battery charging algorithm (via the free Victron Connect app) Light dimming functions programmable (via the free Victron Connect app) Ultra fast maximum power point tracking max. PV open circuit voltage: 75V Charging algorithm: multi-stage, adaptive integrated Bluetooth module Dimensions: 100 x 113 x 40 mm Weight: 0,5 kg The included Profi-Connection Kit The included connection kit provides everything needed to get the mobile solar set up and running quickly. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller and is also equipped with an Anderson connector on the other side. This allows you to quickly connect or disconnect the controller at any time using the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal alligator clips on the battery side, which are compatible and can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. Customizable upon request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the FSP series. The fsp-2 135w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is coated with an ETFE coating, which provides better protection and at the same time ensures a very high light transmission. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery: 1x Offgridtec FSP-2 135W 12V 1x Victron Energy SCC075015060R SmartSoalr MPPT 75/15 15A 12V 24V Solar Laderegler 1x 6m 2x6mm² module Connection cable with Anderson SB50 connector 1x Offgridtec FSP-2 Connection-Kit

The fsp 2 135w Ultra is a foldable high-end solar panel with integrated charge controller, battery terminals as well as 3 integrated fold-out supports with the help of which you can set up the fsp 2 panel easily and anywhere at a 45 degree angle. The fsp 2 Ultra is the successor of our mp-105w and is equipped with the latest spr back-contact cells and delivers a whopping 135w of solar power in optimal orientation and sunshine. Together with the very compact dimensions when folded and the low overall weight, the fsp 2 sets new standards in terms of flexibility and efficiency among mobile, foldable solar modules. The price of the new Offgridtec fsp 2 Ultra also sets standards among comparable panels and stands up to any comparison. The basic solution for solar-powered, mobile charging of batteries up to max. 200Ah: in the camping area for expeditions for vehicles and boats without fixed solar installation and numerous other applications in different areas overview power management fsp 2 135w Ultra Supported battery types (12v): agm, lead acid, gel usb output: 1a 5v directly to the charge controller 12v consumer output: 10a 12v directly on charge controller Technical data foldable solar panel fsp 2 135w Ultra Module voltage (Vmp): 19,8V Max. Charging current (Imp): 6,82A Open circuit voltage (Voc): 23,3V Short circuit current (Isc): 7,22A Charge controller: Offgridtec pwm Pro 12/24-10 Supported battery types(12v): agm, lead acid, gel 2 usb outputs: 5v max 2,4A directly on charge controller 12v consumer output: 10a 12v directly on charge controller Dimensions closed: 560 x 440 x 20 mm Dimensions open designed: 560 x 1545 x 6 mm Weight: 4,8 kg Cable length module to controller: 6,5m Cable length controller to battery: 1m Battery connection: alligator clips Rated power: 120WP Technical note: The charge controller is positively grounded - this may cause problems when connecting to a system where the ground is grounded to negative easy to set up thanks to 3 firmly integrated feet Three feet are sewn to the pocket of the fsp, which can be easily folded out to place the panel on the ground at an angle of 45 degrees. Thus, the module is fully assembled and ready for use within one minute. Offgridtec pwm Pro charge controller 10a The Offgridtec pwm 12/24-10 (mpn 1-01-010910) is a microprocessor controlled solar charge controller with 10a max charge power and can charge both 12v and 24v batteries. It uses advanced 3-stage pwm modulation to get the most out of your agm, gel or lead acid batteries. It is suitable for Solarasystems of 130w at 12v and 260w at 24v battery voltage. Features pwm pro charge controller 10a max. charge current 10a, for up to 130w PV power at 12v and 260w at 24v systems modern, 3-stage pwm charge control for gentle and efficient charging of your battery(ies) 3 battery types adjustable, agm, gel and liquid lead acid intuitive operation via 2 buttons directly on the device large LCD display with numerous display options, incl. kWh meter 2 usb-ports with a maximum output power of 2.4A Load output with numerous configuration options, e.g. for light control Temperature compensated battery charging (optional temperature sensor required, not included) customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp series As with all Offgridtec solar module series, the fsp-2 series is designed with high quality in mind. The fsp-2 120 uses back-contacted solar cells like those used in our SP high-performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Lieferumfang: 1x Offgridtec FSP-2 135W 12V 1x Offgridtec PWM Pro Laderegler 12V/24V 10A USB-Port 1x 6m 2x6mm² modul Connection calbe with Anderson SB50 connector 1x Ofgridtec FSP-2 Connection-Kit