The lfp-bms 12.8v 200Ah (mpn BAT512120610from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, lfp 12.8/200 stores a whopping 2560Wh of power with a very low self-discharge rate and superior cycle life. The lfp battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. important technical data of the lfp bms 12.8v 200Ah: Rated voltage: 12.8v Victron Part number: BAT512120610 Rated energy at 25°C*: 2560Wh Rated capacity at 25°C/0°C/-25°C: 200Ah / 160Ah / 100Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: <=200A maximum continuous discharge current: 500A Weight: 20kg Connection terminal: M10 For more technical data, please refer to the official data sheet and below in the "technical data" section. Efficient and economical: the lfp-bms 12.8v 200Ah Although Victrons lfp-batteries are expensive compared to AGM batteries or GEL batteries, the higher purchase cost will more than pay off in most cases. With a service life of up to 5000 cycles, they exceed the maximum service life of even the best lead-acid batteries many times over. In addition, the lfp 12.8/200 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be essential for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy lfp lithium batteries from Victron can be integrated into almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 3000 Ah at 48 V - this corresponds to a maximum storable nominal energy of around 154,000 Wh. 5 models available in total The lfp-bms family consists of a total of 5 models. In addition to the lfp 12.8/200, there are the following other power classes: 12.8v 60Ah LiFePO4 768Wh 12.8v 90Ah LiFePO4 1152Wh 12.8v 160Ah LiFePO4 2048Wh 12.8v 300Ah LiFePO4 3840Wh IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt or shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°C. For this you have the choice between the bms 12/200 and the VE.Bus bms - For further details of the devices, please refer to the respective item descriptions.Due to the classification as dangerous goods, this product is shipped by freight forwarding! Scope of delivery: 1x LiFePO4 battery lfp-CB 12,8/200, Victron Energy BAT512120610 1x instruction manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category of VE Category Lithium Batteries - Total program with all available batteries from this range

The lfp-bms 12.8v 160Ah (mpn bat512116610) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, lfp 12.8/160 stores a whopping 1152Wh of power with a very low self-discharge rate and superior cycle life. The lfp battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. important technical data of the lfp bms 12.8v 160Ah: Rated voltage: 12.8v Victron Part number: bat512116610 Rated energy at 25°c*: 2048Wh Rated capacity at 25°C/0°C/-25°C: 160Ah / 130Ah / 80Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: <=160A maximum continuous discharge current: 400a Weight: 20kg Connection terminal: M8 For more technical data, please refer to the official datasheet and below in the "technical data" section. Efficient and economical: the lfp-bms 12.8v 160Ah Although Victrons lfp-batteries are expensive compared to AGM batteries or GEL batteries, the higher purchase cost will more than pay off in most cases. With a service life of up to 5000 cycles, they exceed the maximum service life of even the best lead-acid batteries many times over. In addition, the lfp 12.8/160 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be essential for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy lfp lithium batteries from Victron can be integrated into almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 3000 Ah at 48 V - this corresponds to a maximum storable nominal energy of around 154,000 Wh 5 models available in total The lfp-bms family consists of a total of 5 models. In addition to the lfp 12.8/160, there are the following other power classes: 12.8v 60Ah LiFePO4 768Wh 12.8v 90Ah LiFePO4 1152Wh 12,8v 200Ah LiFePO4 2560Wh 12.8v 300Ah LiFePO4 3840Wh IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt or shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°c. For this you have the choice between the bms 12/200 and the ve.bus bms - For further details of the devices, please refer to the respective article descriptions. Due to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery: 1x LiFePO4 battery lfp-CB 12.8/160, Victron Energy bat512116610 1x instruction manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category by ve Category Lithium Batteries - Total program with all available batteries from this range

The LiFePO4 12.8v 100ah Smart Battery (mpn bat512110610) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, the LiFePO4 12.8/100 Smart stores a whopping 1280Wh of power, with a very low self-discharge rate and superior battery life. The LiFePO4 battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. The integrated Bluetooth for connection with the Li-Ion App completes the overall package. Victron LiFePO4 12.8v 100ah Smart Battery Rated voltage: 12.8v built-in bluetooth to connect with Victron Li-Ion app Victron Part number: bat512110610 Rated energy at 25°c*: 1280Wh Rated capacity at 25°c/0°c/-25°c: 100ah / 80Ah / 50Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: 100a maximum continuous discharge current: 200a Weight: 16kg Connection terminal: m8 For more technical data, please refer to the official data sheet and below in the "technical data" section. efficient, economical..: LiFePO4 12.8v 100ah Smart Battery While LiFePO4 batteries are expensive compared to agm batteries or gel batteries, the higher initial cost will more than pay for itself in most cases. With a lifetime of up to 5000 cycles, they exceed the maximum lifetime of even the best lead-acid batteries many times over. In addition, the lfp 12.8/100 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be of essential importance for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy LiFePO4 smart batteries from Victron can be implemented in almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 3000Ah at 48v - this corresponds to a maximum storable nominal energy of around 154,000 Wh (when used with the 300Ah 12.8v version). integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful to detect a (possible) problem like cell imbalance in time. IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt/shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°c. For this you have the choice between the bms 12/200 and the ve.bus bms - For further details of the devices, please refer to the respective article descriptions. Due to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery: 1x Victron Energy bat512110610 LiFePO4 12.8v 100ah Smart Battery1x user manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category by ve Category Lithium Batteries - Total program with all available batteries from this range

The LiFePO4 25.6v 200Ah Smart Battery (mpn bat524120610) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, the LiFePO4 25.6/200 Smart stores a whopping 5120Wh of power and does so with a very low self-discharge rate and an outstanding lifespan. The LiFePO4 battery family from Victron already has integrated cell balancing and a bms (battery management system) interface. The integrated Bluetooth for connection with the Li-Ion App completes the overall package. Victron LiFePO4 25.6v 200ah Smart Battery Rated voltage: 25.6v built-in bluetooth to connect with Victron Li-Ion app Victron Part number: bat524120610 Nominal energy at 25°C*: 5120Wh Rated capacity at 25°C/0°C/-25°C: 200Ah / 160Ah / 100Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: <200A maximum continuous discharge current: 400A Dimensions: 237 x 650 x 163 mm Weight: 39kg Connection terminal: M8 For more technical data, please refer to the official data sheet and below in the "technical data" section. efficient, economical..: LiFePO4 25.6v 200Ah Smart Battery While LiFePO4 batteries are expensive compared to agm batteries or gel batteries, the higher initial cost will more than pay for itself in most cases. With a lifetime of up to 5000 cycles, they exceed the maximum lifetime of even the best lead-acid batteries many times over. In addition, the lfp 25.6/200 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be of essential importance for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy LiFePO4 smart batteries from Victron can be implemented in almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 3000Ah at 48v - this corresponds to a maximum storable nominal energy of around 154,000 Wh (when used with the 300Ah 12.8v version). integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful to detect a (possible) problem like cell imbalance in time. IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt/shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°C. Suitable for this purpose is the VE.Bus bms - for further details please refer to the respective item descriptions.Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1x Victron Energy bat524120610 LiFePO4 25.6v 200ah Smart Battery 1x user manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category of VE Category Lithium Batteries - Total program with all available batteries from this range