Offgridtec KStar 10.2kWh ess hybrid system 6.45kWp Luxen Full Black 3-phase

Discover the future of energy supply now with the Offgridtec All-in-one system KStar BluE-S and the matching solar modules from Luxen Solar. The powerful 3-phase system consists of an efficient 10 kW hybrid inverter, the latest LFP batteries with a combined capacity of 10.2 kWh and bifacial 430w Full Black solar modules, which impresses with its smbb half-cut cell technology and excellent anti-PID and low lid performance. Thanks to the hybrid function, the inverter can use both solar energy and mains power to efficiently cover your energy needs. The integrated distribution box enables space-saving and convenient distribution of the generated electricity. The modular battery packs are characterized by their catl LFP cell technology and are among the safest and most efficient on the market. Their innovative thermal foil enables uninterrupted operation, even at temperatures as low as -10°C.

Mobile app monitoring allows you to keep control of your system anytime, anywhere. The adjustable output in each phase and support for diesel generator control offer you maximum flexibility. Of course, you can also make settings directly on the device via the practical display. The intelligent energy management and the various operating modes ensure a reliable power supply in the event of a power failure or blackout.

Compact, safe, efficient

• Plug&Play - simple installation
• Three-phase output
• Adjustable power in each phase
• Glass-glass module
• N-TOPCon cell technology
• smbb Half-Cut cell technology
• Low bos & LCOE
• Bifacial cell module technology
• excellent anti-PID and low lid performance
• 3 bypass diodes
• Supports high PV voltage
• Mobile app monitoring
• On&Off grid parallel system
• Supports diesel generator control (DI/DO)
• Two MPP trackers (Maximum Power Point)
• catl-LFP battery
• 90% depth of discharge (DoD)
• Service life: ~10,000 cycles

The hybrid system contains

• Luxen Solar 430w Mono Bifacial Glass-Glass Solar Module Full Black Luxneri Series n5(depending on selection 15x, 30x, 50x)
• 1x Offgridtec KStar BluE-S-10KT Hybrid Inverter 10kW 3 phase
• 2x Offgridtec KStar BluE-Pack battery 5.1kWh
• 1x Offgridtec KStar Battery pack stand base
• 1x Offgridtec KStar connection cable set inverter battery
• 1x 70m Lapp solar cable h1z2z2-k 1x6 WH/BK
• 10x MC4 plug coupling connector 10mm² PV-KST4/10II & PV-KBT4/10II
• 1x MC4 key tensioner (assembly tool for MC4 connectors)

The 430w Luxen Solar - Bifacial, Full Black

The monocrystalline and bifacial 430w Full Black Series n5 solar module from Luxen Solar (mpn lnvb-430nd) impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. The smbb half-cut cell technology was also used in production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE.

The glass-glass module also offers excellent anti-PID and low lid performance, as well as high hotspot resistance. Its elegant full-black design makes it the ideal choice for Solaranstallations on residential buildings, balcony power plants and many other applications. The manufacturer is confident in its product and guarantees a 30-year service life.

about the 430w Luxen n5 solar module

• Glass-glass module
• N-TOPCon cell technology
• smbb Half-Cut cell technology
• Low bos & LCOE
• Bifacial cell module technology
• excellent anti-PID and low lid performance
• 3 bypass diodes
• 30-year performance guarantee and 15-year product guarantee
• high cell efficiency of over 22%

Half-cell technology

In half-cell technology ("half-cut"), conventional silicon cells are cut in half using a laser. The resulting halves are then centrally connected in parallel, which leads to an increased output of the solar module by reducing resistance losses.

Bifacial cells

Bifacial means two-faced. And the name says it all: the Luxen Solar 430w n5 module is also equipped with solar cells on the back, which means that sunlight can be absorbed even better and the efficiency of the overall module is increased.

Technical data

• maximum output: 430w
• Module voltage (Vmp): 32.04V
• max. current (Imp): 13.42A
• Open circuit voltage (Voc): 38.96V
• Short-circuit current (Isc): 14.13A
• Module efficiency: 22.02%
• Dimensions: 1722 x 1134 x 30 mm
• Operating temperature range: -40°C to +85°C
• Cells: 108 (6x18)
• max. operating voltage: 1500v DC
• Weight: 23,5kg

Hybrid inverter

Compared to conventional inverters, hybrid inverters offer extended functionality. They not only enable the solar power generated to be fed into the grid, but also to be stored in batteries. This means that the stored solar power can be used even when there is no solar radiation. In addition, hybrid inverters optimize power consumption by using the generated solar power primarily in the household before feeding it into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. It also offers comprehensive protection functions, including short circuit, ac leakage current, earth fault, islanding, overload, overvoltage and DC polarity protection. This ensures safe and reliable use of the inverter and protects against potential hazards and damage.

about the Blue-S-10KT Hybrid Inverter

• Plug&Play - simple installation
• Three-phase output
• Adjustable power in each phase
• Supports high PV voltage
• Modular and stackable design
• supports up to 8 BluE-S 5.1kWh batteries
• Mobile app monitoring
• On&Off parallel grid system
• Supports diesel generator control (DI/DO)
• Two MPP trackers (Maximum Power Point)
• Supports Blue-S batteries

Technical data

Input

PV input

• Recommended module power: up to 20kW
• Max. DC voltage: 1100V
• Nominal voltage: 720V
• MPPT voltage range: 140V-1000V
• Starting voltage: 200V
• Max. Input current per mppt: 15A
• Max. Short-circuit current per mppt: 20A

Battery input

• Battery nominal voltage 51.2V
• Charging voltage range: 44-58V
• Max. Charging current: 160A
• Max. Discharge current: 200A

Output

Grid output

• ac rated output power: 10kW
• Max. ac apparent power: 11kVa
• rated ac voltage: 400Vac
• ac frequency range: 50/60Hz+/- 5Hz
• Rated output current: 13.3A
• Max. Output current: 16A

Backup output:

• ac rated output power: 9kW
• Max. ac output current: 10kVa
• Rated output current: 13.3A
• Max. Output voltage: 14.5A
• Nominal output voltage: 400V
• Rated output frequency: 50/60Hz

Further information

• Dimensions: 540 x 980 x 240mm
• Weight: 51kg
• Operating temperature: -25°C~60°C
• Protection class: IP65

Blue-Pack 5.1kWh battery

The KStar Blue-Pack 5.1kWh battery module is part of the BluE Residential ess system and offers flexible and customized energy expansion with modular LFP battery technology. It has an integrated bms and can easily expand the BluE Residential ess system up to 20kWh to meet individual requirements. A reliable energy supply for residential and commercial applications and new possibilities for a sustainable future are made possible.

about the 5.1kWh battery

• Modular and stackable design
• Plug&Play - easy installation
• Mobile app monitoring
• catl-LFP battery
• Flexible capacity options up to 20kWh
• 90% depth of discharge (DoD)

Heating film

The Heating Film is an innovative technology used in the BluE system to improve performance at extreme temperatures. The Heating Film is a thin layer of heatable material that is applied around the battery cells. At low temperatures, the Heating Film automatically activates to heat the battery and maintain an optimum operating temperature. This reduces the battery's sensitivity to cold and improves the performance and service life of the battery. The Heating Film is an effective solution to ensure the reliability of battery systems even under adverse climatic conditions and to guarantee stable performance.

Technical data:

• Battery type: catl Lithium Iron Phosphate (LiFePO4)
• Capacity: 5.12kWh
• Nominal voltage: 51.2V
• DC circuit breaker: 125A
• Operating voltage range: 44.8-56.5V
• Service life: ~10,000 cycles
• Max. Charge/discharge current: 50A/80A
• DC rated power: 4096W
• Max. Charging/discharging power: 2825W/4096W
• Operating temperature range: -10 to 50°C
• Dimensions: 540 x 490 x 240mm
• System weight: 54kg
• Protection class: IP65

Notes on installation: System may only be commissioned by a qualified electrician. Crimping pliers are required to crimp the MC4 connectors onto the cable ends for connection.