Victron VE.Direct cable (with angled connector on one side) 5m

The Victron MPPT 75/15 (MPN SCC010015050R) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends your solar system's output. Next generation MPP-tracker Especially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to PWM charge controllers. Moreover the 75/15 comes with further innovative technologies. Programming, real-time data and logging Latest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control. Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Important features: Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudy Integrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panel Suitable for 12V and 24V systems Rated charging amperage: 15A 200W max. PV-performance at 12V and 400W at 24V 15A consumer output with auto-shutdown at imminent battery undervoltage (deep discharge protection) Reverse polarity protection Multistep adaptive charging algorithm Battery charging algorithm programmable Integrated battery life algorithm extends battery life when activated and all consumers are connected to the consumer output Day/night-time control and dimming options VE.Direct data port integrated VE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct. Integrated battery life algorithm extends battery life If the charge controller can't manage to fully charge the battery within a day the battery status switches constantly between "partly charged" and "end of discharge". This operation mode (no regular charging) is ideal for small lead batteries, for lead-acid batteries otherwise irregular charging and discharging can cause severe damage already after several months. The battery life algorithm checks the battery's charging level and heightens the switch-off threshold from day to day. That means that connected consumers are switched off earlier until the produced energy is sufficient for a full battery charge of 100%. From this point on the threshold is modulated in a way that a full charge can be reached once a week. Delivery Scope: 1x Victron SCC010015050R BlueSolar MPPT 75/15 12V 24V 15A charge controller 1x Manual

This 5m Victron VE.Direct Cable (ASS030530250) is used to connect devices for communication via the VE.Direct-port, for example BlueSolar charge controllers and MPPT Control remote panel. Possible connections:Victron BlueSolar MPPT charge controller to Color Control GX PanelVictron BlueSolar MPPT charge controller to MPPT Control remote unit BMV70xxx-series to Color Control GX PanelBMV60xxx to Color Control GX Panel VE.Direct cables are not included in these device's delivery scopes and available in lengths of 0.3 to 10m. Delivery scope:1x Victron ASS030530250 5m VE.Direct Cable

The Victron Lynx Distributor (mpn lyn060102000) is a modular DC busbar with provisions for four DC fuses. It monitors the status of each fuse and displays their respective states via a led on the front panel. The Lynx Distributor contains one positive and one negative busbar and provides a connection for 4 individual DC device circuits, loads or DC groups. It provides space for individual DC fuses per DC group. Features of the Victron Lynx Distributor Connection for four individual DC device circuits, loads or groups Positive and negative busbar MEGA fuses easy installation Part of the Lynx modular distribution system Fuse display leds If you wish to use the fuse indicator leds on the Lynx Distributor, a connection to a Lynx Shunt is also required. The Lynx Shunt contains the required wide input power supply (8v - 70v dc) to output the required 5v (4.5v - 5.5v) current requirement of the Lynx Distributor PCB. The RJ11 cable required for connection is included. The Lynx Shunt has two ports, either of which can be used. When fully functional, only the central led will be green. If a fuse is blown (or missing), the leds of the central and fuse circuits will light red. If you are not using all the connection points in your DC distribution, dummy fuses may need to be fitted to clear the red leds. Fuses The Lynx distributor uses MEGA fuses. Please note that some MEGA fuses are rated for 36v only (suitable for 24V systems). For 48v systems, fuses rated at 58/64v must be used. Scope of delivery: 1x Victron Lynx Distributor 1x RJ11 cable

The Victron Orion 24/12-25A (MPN ORI241225020) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers. The 24/12 converts 24V DC into 12V DC with constant 25A (300W). Compared to smaller models out of this series it is possible to adjust the output voltage (10-15V).Moreover the 24/12-25 can be used for trickle charge of your battery and supports parallel operation with identical devices to increase the output current. Important details: 24V DC operation voltage, 12V DC output voltage supports parallel operation with identical devices - increases output current can be used for trickle charge remote control possible wide input-voltage-range of 18V to 36V 300W output at constant 25A max. 35A output current high efficiency of 96% weight: 0.7kg DC-DC converter out of the Orion-series provide a clean 12V output current and compensate possible conductor losses as well as fluctuations of the battery voltage. Remote on-/off-connection on all high-performance modelsThanks to the remote on-/off-switch a high-current-switch on the input-cabling is not necessary. It can be controlled via a power-saving-switch or through the motor's run/stop-switch (see manual). Adjustable output voltage allows battery chargingThanks to the adjustable output voltage it is possible to charge a 12V battery through a 24V-system. Parallel operationUp to 5 units can be connected parallely. Delivery scope:1x Victron ORI241225020 Orion 24/12-25A DC DC Converter 24V to 12V 25A 300W

The new MultiPlus 12/800/35-16 (Victron Energy, pmp121800000) is the successor to the Multiplus Compact 12/800. This unit is an advanced device combination consisting of a powerful pure sine wave inverter, an advanced 50a battery charger utilizing adaptive charging technology, and a 16a high speed AC transfer switch. In the event of a mains fault or, if shore power or on-board generator is interrupted, the multi's inverter is automatically switched on and takes over the supply to the connected loads. The switching occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic equipment is guaranteed. main features of the MultiPlus 12/800/35-16 Cont. Output power at 25°c: 700w / 800w at non-linear load Victron Energy mpn: pmp121800000 for 12v system voltage integrated 35a mains charger for your batteries integrated 16a mains transfer switch USV operation possible Extensive accessories available Usable in numerous applications, whether on land or mobile proven reliability The complete bridging additionally with a ring transformer topology has proven itself for years. The inverter is short-circuit proof and protected against overheating (whether caused by overload or ambient temperature) PowerControl - (Multiplus 800va 1200va only) The Multi Control remote control panel can be used to set the maximum mains or generator current to be drawn. The MultiPlus then takes into account other connected AC loads and uses only the current that is "left over" for charging. This prevents the generator or shore power connection from being overloaded PowerAssist - (Multiplus 800va 1200va only) Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated by energy from the battery. If the load is reduced, i.e. if consumers are switched off, the energy that is then sufficiently available again can be used to charge the batteries High switch-on power This is required for switching on loads with high inrush currents, such as voltage converters for LED lamps, halogen lamps or power tools Search mode When the search mode is set to 'on', the power consumption of the inverter is reduced by approximately 70% during no-load operation. In this mode, when operating in inverter mode, the Multi will turn off at zero load or low load and turn on again every two seconds for a short period of time. if the output current exceeds a set limit, the inverter resumes operation. If this is not the case, the inverter switches off again programmable relay In the default setting, the multifunction relay acts as an alarm relay, i.e. it switches off the device in the event of faults (device becomes too hot, ripple voltage at the input too high, battery voltage too low) Scope of delivery: Victron Energy pmp121800000, MultiPlus 12/800/35-16

The Offgridtec PSI 12-1000 Smart (MPN 011085) is an advanced 12V 230V sine wave voltage converter with a continuous output of 800W and 1000W for a maximum of 15 minutes. The unit features a 16Bit SPWM chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 10.6 and 16Vdc. The converter can supply 1000W for 15 minutes or 800W continuously. For short inrush currents, the PSI 12-1000 delivers 1600W. Thanks to its advanced constitution, even sensitive electrical appliances can be supplied with power reliably and permanently Advanced development of the HP voltage transformer family The PSI series is the further development of the HP voltage transformers and comes up trumps with numerous innovations and optimisations: Input and output of the PSI are galvanically isolated and the housing has an earth connection. Mains frequency (50Hz/60Hz) and output voltage (220V / 230V) can be set via a dip switch. The brand new SPWM 16-bit chipset delivers power of the highest quality and allows even very sensitive electronics to be reliably supplied with power. Compared to older chipsets, it is much more solid and durable. Configuration The Offgridtec 12-1000 PSI converter is equipped with an RS485 data output, providing you with options for external communication and configuration: RS485 to USB interface connection cable Part no.: The interface cable, included as standard, allows you to monitor various performance parameters on a notebook or PC. In addition, the PSI 12-1000 can be conveniently configured via the free PSI-Control PC software. Performance features of the PSI 12-1000 at a glance Modern, safe design with galvanic isolation of input and output RS485 communication module for configuration via PC / notebook with free configuration software from Offgridtec Very low self-consumption in idle / stand-by, max. efficiency <> Introduction of advanced SPWM technology, output of a perfect sine wave New thermal design for optimal heat dissipation and reduced noise levels adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working status Input protection: overvoltage protection, low-voltage protection Output protection: overload protection, short-circuit protection Overtemperature protection: temperature-controlled cooling and automatic shutdown in case of overtemperature 1m 25mm² connection cable with M8 ring lugs Already included: High-quality battery connection cable with 1m length, RS485 to USB interface cable Performance parameters at a glance Nominal power (continuous power / 15min power / peak power): 800W / 1000W / 1600W Input voltage range: 10.6 to 16 Vdc Output voltage waveform: pure sine wave Communication module: RS485 USB output 5VDC / 1A, RS485 communication port Significantly more efficiency thanks to the latest SPWM Technology Weight and dimensions (LxWxH): 3.9 kg at 296.3 × 231.5 × 98.5mm All other technical data can be found in the data sheet Scope of delivery: 1x Offgridtec 1-01-011085 PSI 12-1000 Sine wave voltage converter 12V 230V 1000W / 1600W 1x Set battery connection cable 1m 25mm² Red / Black 1x RS485 to USB interface cable 1x Fuse for battery connection cable 1x Instruction manual

The Cerbo gx communication center from Victron Energy (mpn bpp900450100) gives you perfect control over your system and maximizes its performance. The latest device in the Victron gx line scores high on connectivity and smart power. Maximizing system performance has never been easier. Easy monitoring and control With the Cerbo gx, you can quickly monitor battery state of charge, power consumption, pv, generator and grid energy production. Checking tank levels and temperature measurements are also possible. Easily control the shore power feed current limit, the (automatic) start/stop generator, or change any settings to optimize the system. Track alerts, perform diagnostic checks and solve problems remotely. Features of the Cerbo gx communication center Easy control of your system Flexible connection options Maximize your system performance Uncomplicated mounting Available connections 4 tank connections 4 temperature connections 3 VE.Direct ports 3 USB ports 4 digital inputs 2 relays Flexible connection options System control by the Cerbo gx communication center is possible regardless of time and place. The device offers three different options for connection. Either via the free Victron Remote Management (vrm) portal, the Victron Energy gx Touch 50 (5-inch touchscreen display) or via the VictronConnect app via Bluetooth. Scope of delivery: Cerbo gx device Power cord with Inlne fuse and M8 connection sockets for battery or DC bus mounting VE.Can termination resistors (2 pcs.) Terminal blocks for all connections on each side

This set of two battery terminal covers from Offgridtec (mpn 012855) prevents dust from entering the cable end. They are made of high quality, insulating and flexible soft plastic material.Battery terminal cover prevents short circuits and sparks, which help protect the terminal and electrical components. Can be used in many fields. Features set of 2: positive and negative cover Dimensions: 53.5 x 26 x 11.5mm Weight: 0,05 kg Easy to use Scope of delivery: 1x positive pole cover (red) 1x negative pole cover (black)