The all-in-one energy solution from Zendure is a 2.4 kWh storage system for balcony power plants that you can install yourself in just a few minutes. The device offers you a cycle-proof LiFePO4 battery including a smart PV hub in a slim housing. Thanks to the advanced self-heating technology, the aio 2400 can continue to operate in sub-zero temperatures even in winter environments. This means that the battery temperature always remains above 0°C for normal operation. Thanks to its IP65 protection class, the set can be placed on your balcony, in the garden or in the living room, regardless of whether it is raining or snowing. In addition to protection against environmental influences, the system impresses with a low noise level of 0dB. You have the choice of hanging the storage unit on the wall or standing it on the floor. Everything you need for both is included in the scope of delivery. Plug-and-play - plug in and save money Control your own consumption Make your lifestyle more environmentally friendly Quickly amortizing investment You can also attach your micro inverter directly to the device. No additional cables are required - simply plug in and get started. The system is compatible with up to 99% of microinverters on the market! Take a look at our Hoymiles-Products. You also need to complete the balcony power station, Solar modules. The all-in-one solution at a glance Plug and play - plug in and get started Smart control via app Dual 1200W mppt Battery chemistry: LiFePO4 Self-heating function: Rechargeable at up to -20°C Intelligent energy management Compact design Save space during installation No cable chaos Manufacturer's warranty: 10 years How does the All-In-One system work? During the Day the PV hub directs the energy generated by the solar panels to the micro inverter, which converts it into alternating current to power your household appliances. Surplus energy is intelligently stored in the battery so that it can also be used at night At night or when there is too little sunlight. Smart App Control With the Zendure app (available for ios and Android) and the Zendure Satellite Plug you can monitor, control and optimize the energy consumption of your house or apartment to the second. In addition to continuously retrieving energy consumption data from your household appliances, you can also switch them on or off. This data gives you a comprehensive insight into your electricity consumption. Save costs The All-In-One system is tailored precisely to your individual needs. The tailor-made storage solution allows you to maximize your energy efficiency and save money. In contrast to comparable alternatives, with the aio 2400 you only pay €0.559/Wh instead of up to €0.833/Wh. With intelligent distribution, you can achieve electricity savings of up to €642.40 per year. The storage system offers protection against: Overvoltage Overcurrent Short-circuit current Temperature Overcharging Deep discharge Technical data General data Capacity: 2.4 kWh Battery chemistry: LiFePO4 Efficiency mppt: 99% Efficiency of the output: 98% Charging temperature: 0°C - +55°C Discharge temperature: -20°C - +60°C 4000 cycles (useful capacity 80%) 8000 cycles (useful capacity 70%) Connection type: Bluetooth, 2.4 GHz Wi-Fi Protection class: IP65 Weight: 31.3 kg Weight with bracket: 37 kg Dimensions: 657 x 427 x 150 mm PV input Input voltage range: 16-60 V PV input 1: 16-60 v=14 a, max. 400 W PV input 2: 16-60 v=20 a, max. 800 W Rated current mppt 1: 14 A Rated current mppt 2: 20 A Output to micro inverter Nominal output power: 1200 W Output power 1: 16-60 V=max. 30 a, max. 1200 W Output power 2: 16-60 V=max. 30 a, max. 1200 W Scope of delivery: 1x Zendure All-In-One 2.4kWh LiFePO4 battery storage system + PV hub for balcony power plants

The Pylontech us2000c (mpn us2000nb02v00201) is a lithium storage tank of the latest generation. The accumulator has been specially developed to fully meet the high demands placed on a solar accumulator today. Maximum safety and a long service life are guaranteed even with regular deep discharge thanks to the latest technology. The latest battery of the market-leading manufacturer with now 2.4kWh per module has again a battery management system (bms) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters. Features Extremely cycle resistant - over 6000 cycles at 95% DoD More usable energy content than the predecessor model US2000 Lifetime over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging power possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the surge current when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharge overvoltage during charging excessive currents during charging and discharging over and under temperature Short circuit and reverse polarity Constant monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS. High cycle life The extremely high cycle life of the installed LiFePo4 cells make Pylontech us2000c modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-connected or stand-alone, the Pylontech storage offers several advantages over typical lead-acid batteries and other lithium technologies. Combine your Pylontech set according to your wishes Per selection you will receive between 2 and 12 pieces Pylontech us2000c (4.8 - 28.8 kWh). Matching the selected us2000c quantity, you can choose a battery cabinet, as well as a battery connection cable set (Pylontech to inverter). The Pylontech battery connection cable set (mpn bw0us3000bal0002) includes 2 x 2 meter cables (plus/minus) with a cross section of 25mm² each and a CAN data cable with rj45 connectors on both sides. The set is needed to connect the batteries of Pylontech with an inverter. Technical data Battery type: Lithium iron phosphate (LiFePo4) Rated voltage: 48V Rated capacity: 50 Ah / 2.4 kWh Usable capacity (95% DoD): 47.5 Ah / 2.28 kWh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. (discharge) charging current: 90A Communication: rs485, CAN Weight: 24 kg Dimensions: 442 x 410 x 89 mm Protection class: IP20 Operating temperature range: 0°C - +50°C Storage temperature range: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 years manufacturer warranty Certification: iec62619, ce, UN38.3 Due to classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery (per selection) 2 - 12 x Pylontech us2000c LiFePO4 (2.4 kWh per battery) 0 - 1 x battery cabinet 0 - 1 x battery connection cable set Pylontech to inverter

The us3000c (mpn us3000c) from Pylontech is a lithium storage tank of the latest generation. The storage tank has been specially developed to fully meet the high demands placed on a solar storage tank today. Maximum safety and a long service life are guaranteed even with regular deep discharges thanks to the latest technology. The latest battery from the market-leading manufacturer, now with 3.5 kWh per module, once again has a battery management system (bms) built into each module and therefore offers a high level of safety. This means that the individual cells are monitored internally and protected against overvoltage, overtemperature, etc. in a balanced manner. The battery is compatible and certified with many available inverters. Features Extremely cycle-resistant - over 6000 cycles at 95% DoD More usable energy content than the predecessor model US3000 Service life over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging capacity possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function, which is able to reduce the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect the ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects every battery cell installed from harmful influences over the entire service life of the module and effectively prevents premature failure. Protection against: overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Continuous monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the required storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) battery and an integrated BMS. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech us3000c modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Combine your Pylontech set according to your requirements Depending on your selection you will receive between 1 and 8 units of Pylontech us3000c (3.5 - 28 kWh). You will receive an optional battery cabinet to match the selected us3000c quantity. The set includes a battery connection cable set (Pylontech to inverter). The Pylontech battery connection cable set (mpn bw0us3000bal0002) includes 2 x 2 meter cables (plus/minus) with a cross-section of 25mm² each and a CAN data cable with rj45 connectors on both sides. The set is required to connect the batteries from Pylontech to an inverter. Technical data Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48V Nominal capacity: 3552 Wh Usable capacity (95% DoD): 3374 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 90A Max. (discharging) charging current: 74A Recommended charge/discharge current: 37A Communication: rs485, CAN Weight: 32 kg Dimensions: 442 x 420 x 132 mm Protection class: IP20 Charging temperature range: 0°C - +50°C Discharge temperature range: -10°C - +50°C Storage temperature range: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 year manufacturer's warranty Certification: TÜV, ce, UN38.8 Due to the classification as dangerous goods, this product will be shipped by a forwarding agent! Scope of delivery (per selection): 1 - 8 x Pylontech us3000c LiFePO4, 3.5 kWh per battery (quantity depending on selection) 0 - 1 x battery cabinet 1 x battery connection cable set Pylontech to inverter

With the SolarFlow Zendure is one of the first to combine a balcony power plant with a storage option. Thanks to the SolarFlow, the supply of solar energy via a mini-pv system is no longer limited to the daytime. The energy generated is stored in the batteries after the consumers have been supplied and can therefore also be used at night or when there is little sunshine.To use the SolarFlow system, at least one Solar paneland a Micro inverter is required. Here you can find suitable systems.Overview of the systemDual MPPT pv input - 1200w per trackerTotal capacity of 7,680wh possible (modular expansion)Compatible with 99% of all balcony power plantsip65 waterproof protectionMonitoring and control via app possible10 year manufacturer's warrantySimple integrationTÜV Rheinland certified (id 1111272000)The set contains:1x SolarFlow Smart pv Hub 2000 MPPTZendure Solarflow expansion battery (optionally selectable)1-4x AB1000 960wh Add on LiFePO41-4x AB2000 1920wh Add on LiFePO44x solar cable (3m)1x battery cable (1.5m)4x microinverter cable (0.5m)2x mc4 Y-plug6x mounting screws (M4.7x39mm)2x flat washer1x antenna1x user manual + warranty certificatehow does SolarFlow work?During the day the energy generated by the pv modules is fed to the micro inverter via the pv hub and converted into alternating current to power the appliances in the house. Surplus energy is intelligently stored in the batteries so that it can be used at night. This enables savings of up to 32% on the annual electricity bill. The intelligent control ensures that the surplus energy is stored efficiently, while the pv hub (with adjustable range from 100w to 1200w) supplies 600w to the microinverter as standard to fully cover the electricity demand during peak timesDuring the Night the surplus energy stored in the batteries (with the option to expand up to 3840wh capacity) is used to power a variety of appliances. These range from high wattage appliances such as air conditioners and refrigerators to devices such as wifi routers, lamps, laptops and many others.Compatible with a wide range of balcony power stationsThanks to the universal mc4 connections, SolarFlow is compatible with 99% of balcony power stations. This includes popular brands such as Hoymilesdeye, Priwatt etc. This seamless integration saves time and money as existing balcony power stations can also be easily and quickly combined with the SolarFlow. Due to the compact, stackable design, little space is required for installation and cabling is kept to a minimum.waterproof protectionThe PowerHub and the batteries are protected by a robust metal surface and have an ip65 protection class, which offers complete protection against dust and water. The set can be installed both inside and outside the home.Zendure appThe Zendure app allows you to monitor the SolarFlow and change settings. The information is displayed in real time, including weather and green energy consumption, so that you can make the optimum configuration for your system. The app can also be used to retrieve historical data.Zendure SolarFlow Smart pv Hub 2000 MPPTThe Smart pv Hub 2000 MPPT acts as a link between your balcony power plant and the LiFePO4 storage units of your SolarFlow system. The energy generated by the balcony power station is stored in the LiFePO4 batteries after the loads have been supplied. In this way, the stored energy can also be used efficiently at night or when there is little sunlight. The new Smart pv Hub 2000 can process even more solar power than the previous Smart pv Hub 1200.Technical dataRecommended input power pv modules: 1200 w (per tracker)Max. Input voltage: 60 VMPPT voltage range: 16-60 VMPPT voltage range at full power: 35-60 VNumber of mppt: 2Max. Input current: 2x26 AOperating temperature range: -20°C - +45°CProtection class: ip65Weight: 5.2 kgDimensions: 363 x 246 x 64 mmZendure Solarflow extension batteriesTechnical data AB1000Capacity: 960wh (20Ah / 48V)Battery type: LiFePO4Max. Extension capacity: 4 x 960wh = 3840 whProtection class: ip65Weight: 11.5 kgDimensions: 350 x 200 x 186.5 mmTechnical data AB2000Capacity: 1920wh (40Ah / 48V)Battery type: LiFePO4Max. Extension capacity: 4 x 1920wh = 7680 whProtection class: ip65Weight: 25 kgDimensions: 450 x 280 x 420mm

With the SolarFlow Zendure is one of the first to combine a balcony power plant with a storage option. Thanks to the SolarFlow, the supply of solar energy via a mini PV system is no longer limited to the daytime. The energy generated is stored in the batteries after the consumers have been supplied and can therefore also be used at night or when there is little sunshine. At least one solar panel and a micro inverter are required to use the SolarFlow. Here you can find suitable systems. Important features Dual MPPT PV input - 400w per tracker Total capacity of 3,840Wh possible (modular expansion) Compatible with 99% of all balcony power plants ip65 waterproof protection Monitoring and control via app possible 10-year manufacturer's warranty Simple integration TÜV Rheinland certified (id 1111272000) How does SolarFlow work? During the day the energy generated by the PV modules is fed to the micro inverter via the PV hub and converted into alternating current to power the appliances in the house. Surplus energy is intelligently stored in the batteries so that it can be used at night. This enables savings of up to 32% on the annual electricity bill. The intelligent control ensures that the surplus energy is stored efficiently, while the PV hub (with adjustable range from 100w to 1200w) supplies 600w to the microinverter as standard to fully cover the power demand during peak times During the Night the surplus energy stored in the batteries (with the option to expand up to 3840Wh capacity) is used to power a variety of appliances. These range from high wattage appliances such as air conditioners and refrigerators to devices such as Wi-Fi routers, lamps, laptops and many others. Compatible with a wide range of balcony power stations Thanks to the universal MC4 connectors, SolarFlow is compatible with 99% of balcony power stations. This includes popular brands such as Hoymilesdeye, Priwatt etc. This seamless integration saves time and money as existing balcony power stations can also be easily and quickly combined with the SolarFlow. Due to the compact, stackable design, little space is required for installation and cabling is kept to a minimum. Waterproof protection The PowerHub and the batteries are protected by a robust metal surface and have an ip65 protection class, which offers complete protection against dust and water. The set can be installed both inside and outside the home. Zendure app The Zendure app allows you to monitor the SolarFlow and change settings. The information is displayed in real time, including weather and green electricity consumption, so that you can make the optimum configuration for your system. The app can also be used to retrieve historical data. Technical data PV-PowerHub Recommended input power PV modules: 210-550w (per tracker) DC input voltage: 16 - 60V Max. DC short-circuit current: 14.3 A Number of MPP trackers: 2 Max. Input current: 25 A Rated voltage: 48 V Protection class; ip65 Communication: Bluetooth, 2.4 Ghz WLAN Weight: 4.7 kg Dimensions: 363 x 246 x 64 mm Technical data additional battery ab1000 Capacity: 960Wh (20Ah / 48V) Battery type: LiFePO4 Max. Extension capacity: 4 x 960Wh = 3840 Wh Protection class: ip65 Weight: 11.5 kg Dimensions: 350 x 200 x 186.5 mm Scope of delivery: 1x SolarFlow Smart PV Hub 1x - 4x additional battery AB1000 (depending on selection) 4x solar cable (3m) 1x battery cable (1.5m) 4x microinverter cable (0.5m) 2x MC4 Y-plug 6x mounting screws (M4.7x39mm) 2x flat washer 1x antenna 1x user manual + warranty certificate

The us5000 from Pylontechis a lithium storage tank of the latest generation. The storage tank has been specially developed to fully meet the high demands placed on a solar storage tank today. Maximum safety and a long service life are guaranteed even with regular deep discharges thanks to the latest technology. The latest battery from the market-leading manufacturer, now with 4.8 kWh per module, once again has a battery management system (bms) built into each module and therefore offers a high level of safety. This means that the individual cells are monitored internally and protected against overvoltage, overtemperature, etc. in a balanced manner. The battery is compatible and certified with many available inverters. Features Extremely cycle-resistant - over 6000 cycles at 95% DoD Service life over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging capacity possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function, which is able to reduce the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect the ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects every battery cell installed from harmful influences over the entire service life of the module and effectively prevents premature failure. Protection against: overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Continuous monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the required storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) battery and an integrated BMS. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech us5000 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Combine your Pylontech set according to your requirements Depending on your selection you will receive between 1 and 4 pieces of Pylontech us5000 (4.8 - 19.2 kWh). You will receive an optional battery cabinet to match the selected us5000 quantity. The set includes a battery connection cable set (Pylontech to inverter). The Pylontech battery connection cable set (mpn bw0us3000bal0002) includes 2 x 2 meter cables (plus/minus) with a cross-section of 25mm² each and a CAN data cable with rj45 connectors on both sides. The set is required to connect the batteries from Pylontech to an inverter. Technical data Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48V Nominal capacity: 4800 Wh Usable capacity (95% DoD): 4560 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 200a (15sec) Max. (discharging) charging current: 120a (15min) Recommended charge/discharge current: 75A Communication: rs485, CAN Weight: 38 kg Dimensions: 442 x 420 x 161 mm Protection class: IP20 Charging temperature range: 0°C - +55°C Discharge temperature range: -10°C - +55°C Storage temperature range: -20°C - +60°C Service life: over 15 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 year manufacturer's warranty Certification: TÜV, ce, UN38.8 Due to the classification as dangerous goods, this product will be shipped by a forwarding agent! Scope of delivery (per selection): 1 - 4 x Pylontech us5000 LiFePO4, 4.8 kWh per battery (quantity depending on selection) 0 - 1 x battery cabinet 1 x battery connection cable set Pylontech to inverter

In this bundle from Offgridtec (mpn 016070), in addition to the Pylontech us2000c LiFePO4 battery, you will also receive matching brackets, which are useful for better air circulation and vertical stacking of the batteries. You will also receive an inverter connection set for connecting all components. Below the description you will find a list of compatible inverters that have been tested by the manufacturer in conjunction with the battery storage system. One Kompatibilitätsliste for Pylontech with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our appendices! (Pylontech Compatibility List) The Pylontech us2000c contains: 2x Pylontech us2000c LiFePO4 2x Pylontech Bracket for us2000c 1x Pylontech Battery connection cable set Pylontech to inverter Pylontech us2000c LiFePO4 The Pylontech us2000c (mpn us2000nb02v00201) is a lithium storage system of the latest generation. The storage system has been specially developed to meet the high demands placed on solar storage systems today. Even with regular deep discharges, the Pylontech us2000c guarantees maximum safety and a long service life thanks to the latest technology. In addition, the latest battery from the market-leading manufacturer, now with 2.4kWh per module, once again offers a high level of safety. The battery management system (bms) built into each module regulates this by monitoring and balancing and offers protection against: overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Continuous monitoring of the individual cell voltages (cell balance) Features Extremely cycle-resistant - over 6000 cycles at 95% DoD More usable energy content than the predecessor model US2000 Service life over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging capacity possible Integrated bms Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function, which is able to reduce the current surge when the inverter is started from the battery Dual active protection at bms level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect the ESS system from overvoltage function Modular design By connecting several modules together, the modular system can be tailored precisely to the required storage capacity. Each storage module consists of an integrated bms and a high-performance lithium iron phosphate (LiFePo4) battery. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech us2000c modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Technical data Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48V Nominal capacity: 50 Ah / 2.4 kWh Usable capacity (95% DoD): 47.5 Ah / 2.28 kWh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. (discharging) charging current: 90A Communication: rs485, CAN Weight: 24 kg Dimensions: 442 x 410 x 89 mm Protection class: IP20 Operating temperature range: 0°C - +50°C Storage temperature range: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD bms / monitoring: integrated in each module Warranty: 10 year manufacturer's warranty Certification: iec62619, ce, UN38.3 Pylontech Brackets The Pylontech brackets (mpn wj0zu2000b01) are used to stack the Pylontech battery modules us2000c vertically. With these stackable bracket holders you can stack the Pylontech batteries us2000c vertically and thus ensure the best possible air circulation for the batteries. The batteries should not be stacked directly on top of each other without spacing. a clamping device on the sides of the brackets can be used to connect and secure stacked brackets together. A maximum of 4 batteries can be stacked on top of each other in this way. One set consisting of two holders is required per Pylontech battery. Features Best possible air circulation Connecting and securing stacked brackets via clamping device Up to four batteries can be stacked Set of two brackets for one battery Connection set The Pylontech battery connection cable set (mpn bw0us3000bal0002) includes 2 x 2 meter cables (plus/minus) with a cross-section of 25mm² each and a CAN data cable with rj45 connectors on both sides. The set is required to connect the batteries from Pylontech to an inverter. Contents 2m cable Plus with m8 ring terminal and Amphenol connection (Pylontech) 2m cable minus with m8 ring terminal lug and amphenol connection (Pylontech) CAN data cable with rj45 connectors on both sides

The ark high-voltage storage system from Growatt is flexible due to its modular concept and can be expanded as needed. A battery tower can be set up with a minimum of 2 to a maximum of 10 ark high-voltage batteries. For commissioning with a compatible inverter, a bms control unit and a connection cable set are included. For ground installation, the battery base is also available as an option.The Growatt high voltage battery system includes:ark 2.5h-a1 high voltage battery LiFePO4 2.56kWh (2-10x depending on selection)bdc 95045-a1 bms control unitConnection cable set ark battery to inverterOptional: Battery base ground installationCompatible invertersGrowatt min-xhGrowatt mod-xhMIN 2500tl-xh hybrid inverter pv 2500w 1-phaseMOD 4ktl3-xh 4kW hybrid inverter 3-phaseMIN 3000tl-xh hybrid inverter pv 3000w 1-phaseMOD 5ktl3-xh 5kW hybrid inverter 3-phaseMIN 3600tl-xh hybrid inverter pv 3600w 1-phaseMOD 7ktl3-xh 7kW hybrid inverter 3-phaseMIN 4200tl-xh hybrid inverter pv 4200w 1-phaseMOD 9ktl3-xh 9kW hybrid inverter 3-phaseMIN 4600tl-xh hybrid inverter pv 4600w 1-phaseMOD 10ktl3-xh 10kW hybrid inverter 3-phaseark 2.5h-a1 high voltage batteryGrowatt ark 2.5h-a1 high voltage battery (mpn ark-2.5h-a1) is a LiFePO4 storage battery with high cycle stability and long lifetime. The modular, stackable design allows flexible application for different scenarios and is easy to install. The battery offers excellent performance under heavy load and is also suitable for outdoor installation with its ip65 protection. To avoid overvoltages in the system, the soft start is used.About the ark 2.5h-a1 battery:Modular, stackable battery conceptCobalt-free lithium iron phosphate (LFP)High cycle stability and long service lifeWall or floor installation possibleSoft start to protect the system from overvoltagesAutomatic wake-up in case of undervoltageProtection class ip65 for outdoor installationRemote diagnostics and firmware updateAreas of applicationFor grid-connected as well as stand-alone photovoltaic systemsEmergency power supplyUninterruptible power supplies (usv / UPS)Softstart to protect the systemThe soft start mechanism is a protective function used on the Growatt battery to protect the system from overvoltages. When the battery is started or turned on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system.High cycle lifeGrowatt ark battery modules are an ideal storage solution for photovoltaic systems due to their extremely high cycle life and the use of LiFePo4 cells. Regardless of whether it is a grid-tied or off-grid system, Growatt storage offers numerous advantages over traditional lead-acid batteries and other lithium technologies.Technical Data:Battery type: cobalt-free lithium iron phosphate (LiFePo4)Energy capacity: 2.56?kWhUsable capacity: 2.3?kWhRated voltage: 51.2?VOperating voltage range: 47.2-56.8?VCharge/discharge current: 25?A/0.5?CProtection class: ip65Temperature range: -10~50° CDimension: 650 x 260 x 180 mmWeight: approx. 28 kg10 years manufacturer warrantyCertificates: iec62619, ce, cec, rcm, UN38.3bms control unitThe Growatt bdc 95045-a1 bms acts as a central monitoring and control unit within the ark high-voltage battery system and supports communication with Growatt min and mod xh inverters. It allows the connection of up to 10 battery modules with an individual capacity of 2.56 kWh. These modules can be connected in series to form a battery tower that has a total capacity of up to 25.64 kWh. Storage towers can also be connected together, requiring one bms per tower.About the bdc 95045-a1 bmsCompatible with Growatt min-xh and mod-xh invertersModular, stackable battery designMonitoring and controlbms control parametersControl parameters include state of charge (soc), line voltage, current, cell voltage, cell temperature and PCBA temperature measurement. By precisely monitoring these parameters, the bms ensures optimal battery performance and longevity.Flexible expansionGrowatt's ark battery system offers great flexibility through its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward due to its modular design and use of cables. Another innovation of the ark system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand.Technical data:Protection class: ip65Temperature range: -10~50° CDimension: 650 x 260 x 185 mmCommunication: CANWeight: 8 kg10 years manufacturer warrantyConnection cable set to inverterThe Growatt battery cable set is needed to connect Growatt ark2.5h-a1 batteries to min- or mod-xh series inverters.2x 2m power cable (plus/minus)2m communication cable2m ground wireark battery baseThe Growatt ark battery base is suitable for ground installation of Growatt ark battery modules and provides a secure stand for the battery tower. The Growatt ark system is modular, meaning that multiple batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules, as well as the associated bms, can be stacked on one base.for base mounting of Growatt ark hv and xh batteriesone base per battery towerWeight: 3kg

In this bundle from Offgridtec (mpn 016075), in addition to the Pylontech us2000c LiFePO4 battery, you will also receive matching brackets, which are useful for better air circulation and vertical stacking of the batteries. You will also receive an inverter connection set for connecting all components. Below the description you will find a list of compatible inverters that have been tested by the manufacturer in conjunction with the battery storage system. One Kompatibilitätsliste for Pylontech with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our appendices! (Pylontech Compatibility List) The Pylontech us2000c contains: 3x Pylontech us2000c LiFePO4 3x Pylontech Bracket for us2000c 1x Pylontech Battery connection cable set Pylontech to inverter Pylontech us2000c LiFePO4 The Pylontech us2000c (mpn us2000nb02v00201) is a lithium storage system of the latest generation. The storage system has been specially developed to meet the high demands placed on solar storage systems today. Even with regular deep discharges, the Pylontech us2000c guarantees maximum safety and a long service life thanks to the latest technology. In addition, the latest battery from the market-leading manufacturer, now with 2.4kWh per module, once again offers a high level of safety. The battery management system (bms) built into each module regulates this by monitoring and balancing and offers protection against: overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Continuous monitoring of the individual cell voltages (cell balance) Features Extremely cycle-resistant - over 6000 cycles at 95% DoD More usable energy content than the predecessor model US2000 Service life over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging capacity possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function, which is able to reduce the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect the ESS system from overvoltage function Modular design The system has a modular design and can be configured precisely to the required storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) battery and an integrated BMS. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech us2000c modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Technical data Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48V Nominal capacity: 50 Ah / 2.4 kWh Usable capacity (95% DoD): 47.5 Ah / 2.28 kWh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. (discharging) charging current: 90A Communication: rs485, CAN Weight: 24 kg Dimensions: 442 x 410 x 89 mm Protection class: IP20 Operating temperature range: 0°C - +50°C Storage temperature range: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 year manufacturer's warranty Certification: iec62619, ce, UN38.3 Pylontech Brackets The Pylontech brackets (mpn wj0zu2000b01) are used to stack the us2000c pylon battery modules vertically. With these stackable bracket holders you can stack the Pylontech batteries us2000c vertically and thus ensure the best possible air circulation for the batteries. The batteries should not be stacked directly on top of each other without spacing. a clamping device on the sides of the brackets can be used to connect and secure stacked brackets together. A maximum of 4 batteries can be stacked on top of each other in this way. One set consisting of two holders is required per Pylontech battery. Features Best possible air circulation Connecting and securing stacked brackets via clamping device Up to four batteries can be stacked Set of two brackets for one battery Connection set The Pylontech battery connection cable set (mpn bw0us3000bal0002) includes 2 x 2 meter cables (plus/minus) with a cross-section of 25mm² each and a CAN data cable with rj45 connectors on both sides. the set is required to connect the batteries of Pylontech with an inverter. Contents 2m cable plus with m8 ring cable lug and Amphenol connection (Pylontech) 2m cable minus with m8 ring terminal lug and amphenol connection (Pylontech) CAN data cable with rj45 connectors on both sides

In this bundle from Offgridtec (mpn 016080), in addition to the Pylontech us2000c LiFePO4 battery, you will also receive matching brackets, which are useful for better air circulation and vertical stacking of the batteries. You will also receive an inverter connection set for connecting all components. Below the description you will find a list of compatible inverters that have been tested by the manufacturer in conjunction with the battery storage system. One Kompatibilitätsliste for Pylontech with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our appendices! (Pylontech Compatibility List) The Pylontech us2000c contains: 4x Pylontech us2000c LiFePO4 4x Pylontech Bracket for us2000c 1x Pylontech Battery connection cable set Pylontech to inverter Pylontech us2000c LiFePO4 The Pylontech us2000c (mpn us2000nb02v00201) is a lithium storage system of the latest generation. The storage system has been specially developed to meet the high demands placed on solar storage systems today. Even with regular deep discharges, the Pylontech us2000c guarantees maximum safety and a long service life thanks to the latest technology. In addition, the latest battery from the market-leading manufacturer, now with 2.4kWh per module, once again offers a high level of safety. The battery management system (bms) built into each module regulates this by monitoring and balancing and offers protection against: overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Continuous monitoring of the individual cell voltages (cell balance) Features Extremely cycle-resistant - over 6000 cycles at 95% DoD More usable energy content than the predecessor model US2000 Service life over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging capacity possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function, which is able to reduce the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect the ESS system from overvoltage function Modular design The system has a modular design and can be configured precisely to the required storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) battery and an integrated BMS. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech us2000c modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Technical data Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48V Nominal capacity: 50 Ah / 2.4 kWh Usable capacity (95% DoD): 47.5 Ah / 2.28 kWh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. (discharging) charging current: 90A Communication: rs485, CAN Weight: 24 kg Dimensions: 442 x 410 x 89 mm Protection class: IP20 Operating temperature range: 0°C - +50°C Storage temperature range: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 year manufacturer's warranty Certification: iec62619, ce, UN38.3 Pylontech Brackets The Pylontech brackets (mpn wj0zu2000b01) are used to stack the us2000c pylon battery modules vertically. With these stackable bracket holders you can stack the Pylontech batteries us2000c vertically and thus ensure the best possible air circulation for the batteries. The batteries should not be stacked directly on top of each other without spacing. a clamping device on the sides of the brackets can be used to connect and secure stacked brackets together. A maximum of 4 batteries can be stacked on top of each other in this way. One set consisting of two holders is required per Pylontech battery. Features Best possible air circulation Connecting and securing stacked brackets via clamping device Up to four batteries can be stacked Set of two brackets for one battery Connection set The Pylontech battery connection cable set (mpn bw0us3000bal0002) includes 2 x 2 meter cables (plus/minus) with a cross-section of 25mm² each and a CAN data cable with rj45 connectors on both sides. the set is required to connect the batteries of Pylontech with an inverter. Contents 2m cable plus with m8 ring cable lug and Amphenol connection (Pylontech) 2m cable minus with m8 ring terminal lug and amphenol connection (Pylontech) CAN data cable with rj45 connectors on both sides

In this bundle from Offgridtec (mpn 016100), in addition to the Pylontech us5000 LiFePO4 battery, you will also receive matching brackets, which are useful for better air circulation and vertical stacking of the batteries. You will also receive an inverter connection set for connecting all components. Below the description you will find a list of compatible inverters that have been tested by the manufacturer in conjunction with the battery storage system. One Kompatibilitätsliste for Pylontech with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our appendices! (Pylontech Compatibility List) The Pylontech us5000 contains: 2x Pylontech us5000 LiFePO4 2x Pylontech Bracket for us5000 1x Pylontech Battery connection cable set Pylontech to inverter Pylontech us5000 LiFePO4 The Pylontech us5000 is a lithium storage system of the latest generation. The storage system has been specially developed to meet the high demands placed on solar storage systems today. Even with regular deep discharges, the Pylontech us5000 guarantees maximum safety and a long service life thanks to the latest technology. In addition, the latest battery from the market-leading manufacturer, now with 4.8 kWh per module, once again offers a high level of safety. The battery management system (bms) built into each module regulates this by monitoring and balancing and offers protection against: overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Continuous monitoring of the individual cell voltages (cell balance) Features Extremely cycle-resistant - over 6000 cycles at 95% DoD Service life over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging capacity possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function, which is able to reduce the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect the ESS system from overvoltage function Modular design The system has a modular design and can be configured precisely to the required storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) battery and an integrated BMS. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech us5000 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Technical data Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48V Nominal capacity: 4800 Wh Usable capacity (95% DoD): 4560 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 200a (15sec) Max. (discharging) charging current: 120a (15min) Recommended charge/discharge current: 75A Communication: rs485, CAN Weight: 38 kg Dimensions: 442 x 420 x 161 mm Protection class: IP20 Charging temperature range: 0°C - +55°C Discharge temperature range: -10°C - +55°C Storage temperature range: -20°C - +60°C Service life: over 15 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 year manufacturer's warranty Certification: TÜV, ce, UN38.8 Pylontech Brackets The Pylontech brackets are used to stack the us5000 pylon battery modules vertically. These stackable brackets allow you to stack the Pylontech us5000 batteries and thus ensure the best possible air circulation for the batteries. The batteries should not be stacked directly on top of each other without spacing. a clamping device on the sides of the bracket can be used to connect and secure stacked brackets together. A maximum of 4 batteries can be stacked on top of each other in this way. One set consisting of two holders is required per Pylontech battery. Features Best possible air circulation Connecting and securing stacked brackets via clamping device Up to four batteries can be stacked Set of two brackets for one battery Connection set The Pylontech battery connection cable set (mpn bw0us3000bal0002) includes 2 x 2 meter cables (plus/minus) with a cross-section of 25mm² each and a CAN data cable with rj45 connectors on both sides. the set is required to connect the batteries of Pylontech with an inverter. Contents 2m cable plus with m8 ring cable lug and amphenol connection (Pylontech) 2m cable minus with m8 ring terminal lug and amphenol connection (Pylontech) CAN data cable with rj45 connectors on both sides

The Force-H2 power storage system from Pylontech (mpn fh9637m) is a 96v high-voltage battery of the latest generation, which once again features the proven lithium iron phosphate storage technology. These batteries are characterized above all by a long service life and a high level of safety, even at high power. Thanks to their very good cycle stability and high load limit, the battery storage systems are an ideal partner for a powerful photovoltaic system, which can charge the storage system several times a day. A Kompatibilitätsliste for suitable inverters for Pylontech batteries with over 30 brands and companies, including Victron Energy, Growatt, Solis and many more, can be found as a download in our appendices! (Pylontech Compatibility List) Features of the Force-H2 series LiFePO4 storage technology Dual active protection at bms level High charging and discharging capacity possible Cycle life: over 5000 at 95% DoD Pre-charge function to protect the ESS system from overvoltage function Reliable performance thanks to durable components Flexibly expandable Compact and space-saving Service life over 15 years Compatible with many available inverters Easy installation thanks to modular design Flexible expansion With the Force-H2 series, the flexible configuration of the capacity comes to the fore. This can be expanded from 7.1 kWh to 14.2 kWh. The modular design is simple and therefore allows easy installation with uncomplicated cable connections. A further advance of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Thanks to its versatile and space-saving use, the Force H2 series is suitable for a wide range of application scenarios. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech Force-H2 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Optimum coverage of self-consumption In residential buildings, the energy demand is higher in the morning and evening, while the solar energy generated only reaches its maximum value at midday. The battery storage systems in the Force series from Pylontech compensate for this difference between consumption and generation of electrical energy. Even a small battery storage system with a capacity of up to 15 kWh can noticeably optimize self-consumption in a multi-person household and counteract the constantly rising cost of electricity. Larger storage systems enable a longer service life by specifically reducing the depth of discharge or increase the reserves in the event of a cloudy day or power outage. Technical data (single battery module) Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 96v DC Storage capacity: 3552 Wh Communication: can, Modbus Weight: 35 kg Dimensions: 450 x 296 x 296 mm Protection class: IP55 Operating temperature range: 0 - +50°C Storage temperature range: -20°C - +60°C Warranty: 15-year manufacturer's warranty Certification: vde2510-50,iec62619, iec62477-1, iec62040-1, cec, CE, UN38.8 Due to the classification as dangerous goods, this product will be shipped by a forwarding agent! Force-H2 hv control unit The new Force-H2 bms from Pylontech (mpn fc0500m-40) is a control unit of the latest generation that protects every battery module in the Froce-H2 series from adverse conditions and ensures safe and trouble-free continuous operation. It is irrelevant how many storage modules are in use at the same time. The important thing is that one bms is always used per tower. A tower consists of a minimum of 2 to a maximum of 4 Force-H2 3.55 kWh battery modules, which can result in a capacity of 7.1-14.2 kWh. The Force-H2 bms protects against: Deep discharge and overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Intuitive control panel with LED displays The current status of the battery tower can be checked at any time using the control panel on the control unit. In addition, the communication speed (baud rate) can be set directly on the unit. Technical data: Dimensions: 450 x 296 x 190 mm Weight: 12 kg Manufacturer part number: FC0500M-40 Scope of delivery: 2-4x Pylontech Force-H2 3.55 kWh 96v storage unit (depending on selection) 1x Pylontech Force-H2 control unit bms 2-4x cable set parallel connection incl. earthing (depending on storage selection) 2-4x rj45 data cable (depending on storage selection) 2-4x mounting screws (depending on memory selection) 1x operating instructions

In this bundle from Offgridtec (mpn 016105), in addition to the Pylontech us5000 LiFePO4 battery, you will also receive matching brackets, which are useful for better air circulation and vertical stacking of the batteries. You will also receive an inverter connection set for connecting all components. Below the description you will find a list of compatible inverters that have been tested by the manufacturer in conjunction with the battery storage system. One Kompatibilitätsliste for Pylontech with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our appendices! (Pylontech Compatibility List) The Pylontech us5000 contains: 3x Pylontech us5000 LiFePO4 3x Pylontech Bracket for us5000 1x Pylontech Battery connection cable set Pylontech to inverter Pylontech us5000 LiFePO4 The Pylontech us5000 is a lithium storage system of the latest generation. The storage system has been specially developed to meet the high demands placed on solar storage systems today. Even with regular deep discharges, the Pylontech us5000 guarantees maximum safety and a long service life thanks to the latest technology. In addition, the latest battery from the market-leading manufacturer, now with 4.8 kWh per module, once again offers a high level of safety. The battery management system (bms) built into each module regulates this by monitoring and balancing and offers protection against: Deep discharge and overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Continuous monitoring of the individual cell voltages (cell balance) Features Extremely cycle-resistant - over 6000 cycles at 95% DoD Service life over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging capacity possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function, which is able to reduce the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect the ESS system from overvoltage function Modular design The system has a modular design and can be configured precisely to the required storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) battery and an integrated BMS. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech us5000 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Technical data Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48V Nominal capacity: 4800 Wh Usable capacity (95% DoD): 4560 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 200a (15sec) Max. (discharging) charging current: 120a (15min) Recommended charge/discharge current: 75A Communication: rs485, CAN Weight: 38 kg Dimensions: 442 x 420 x 161 mm Protection class: IP20 Charging temperature range: 0°C - +55°C Discharge temperature range: -10°C - +55°C Storage temperature range: -20°C - +60°C Service life: over 15 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 year manufacturer's warranty Certification: TÜV, ce, UN38.8 Pylontech Brackets The Pylontech brackets are used to stack the us5000 pylon battery modules vertically. These stackable brackets allow you to stack the Pylontech us5000 batteries and thus ensure the best possible air circulation for the batteries. The batteries should not be stacked directly on top of each other without spacing. a clamping device on the sides of the bracket can be used to connect and secure stacked brackets together. A maximum of 4 batteries can be stacked on top of each other in this way. One set consisting of two holders is required per Pylontech battery. Features Best possible air circulation Connecting and securing stacked brackets via clamping device Up to four batteries can be stacked Set of two brackets for one battery Connection set The Pylontech battery connection cable set (mpn bw0us3000bal0002) includes 2 x 2 meter cables (plus/minus) with a cross-section of 25mm² each and a CAN data cable with rj45 connectors on both sides. the set is required to connect the batteries of Pylontech with an inverter. Contents 2m cable plus with m8 ring cable lug and amphenol connection (Pylontech) 2m cable minus with m8 ring terminal lug and amphenol connection (Pylontech) CAN data cable with rj45 connectors on both sides

The ark high-voltage storage system from Growatt can be used flexibly thanks to its modular concept and can be expanded as required. A battery tower can be set up with a minimum of 3 to a maximum of 10 ark high-voltage batteries. A bms control unit and a connection cable set are included for commissioning with a compatible inverter. The battery base is also available as an option for ground installation.The Growatt high-voltage battery system contains:ark 2.5h-a1 high-voltage battery LiFePO4 2.56kWh (3-10x depending on selection)hvC 60050-a1 ark bms control unitConnection cable set ark battery to inverterOptional: Battery base Ground installationCompatible invertersGrowatt sph BU-UPGrowatt spa BHsph 4000tl3 bh-up 4kW hybrid inverter 3-phasespa 5000tl3 bh-up 5kW 3-phase string inverterspa 5000tl3 bh-up 5kW 3-phase string invertersph 4000tl3 bh-up 4kW hybrid inverter 3-phasesph 5000tl3 bh-up 5kW hybrid inverter 3-phasespa 6000tl3 bh-up 6kW 3-phase string invertersph 6000tl3 bh-up 6kW hybrid inverter 3-phasespa 8000tl3 bh-up 8kW 3-phase string invertersph 7000tl3 bh-up 7kW hybrid inverter 3-phasespa 10000tl3 bh-up 10kW 3-phase string invertersph 8000tl3 bh-up 8kW hybrid inverter 3-phase sph 10000tl3 bh-up 10kW hybrid inverter 3-phase ark 2.5h-a1 high-voltage batteryThe Growatt ark 2.5h-a1 high-voltage battery (mpn ark-2.5h-a1) is a LiFePO4 storage system with high cycle stability and a long service life. The modular, stackable concept enables flexible application for different scenarios and is easy to install. The battery offers excellent performance under high loads and is also suitable for outdoor installation with its ip65 protection. The soft start is used to prevent overvoltage in the system.About the ark 2.5h-a1 battery:Modular, stackable battery conceptCobalt-free lithium iron phosphate (LFP)High cycle stability and long service lifeWall or floor installation possibleSoft start to protect the system from overvoltageAutomatic wake-up in the event of undervoltageProtection class ip65 for outdoor installationRemote diagnosis and firmware updateAreas of applicationFor grid-connected and stand-alone photovoltaic systemsEmergency power supplyUninterruptible power supplies (usv / UPS)Soft start to protect the systemThe soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system.Long cycle lifeThe Growatt ark battery modules are an ideal storage solution for photovoltaic systems due to their extremely long cycle life and the use of LiFePo4 cells. Regardless of whether it is a grid-connected or off-grid system, the Growatt storage system offers numerous advantages compared to conventional lead batteries and other lithium technologies.Technical data for 1 battery module each:Battery type: Cobalt-free lithium iron phosphate (LiFePo4)Energy capacity: 2.56?kWhUsable capacity: 2.3 kWhNominal voltage: 51.2?VOperating voltage range: 47.2-56.8?VCharging/discharging current: 25?A/0.5?CProtection class: ip65Temperature range: -10~50° CDimensions: 650 x 260 x 180 mmWeight: approx. 28 kg10-year manufacturer's warrantyCertificates: iec62619, ce, cec, rcm, UN38.3bms control unitThe Growatt hvC-60050-a1 bms is a central monitoring and control unit that is part of the ark hv high-voltage battery system and supports communication with the Growatt spa and sph inverters. Up to 10 battery modules, each with a capacity of 2.56 kWh, can be connected to this bms. These modules can be connected in series to form a battery tower offering a total capacity of up to 25.64 kWh. Storage towers can also be connected together, with one bms required per tower.About the hvC 60050-a1 bmsCompatible with Growatt spa and sph invertersModular, stackable battery conceptMonitoring and controlbms control parametersThe control parameters include the state of charge (soc), the mains voltage, the current, the cell voltage, the cell temperature and the PCBA temperature measurement. By precisely monitoring these parameters, the bms ensures optimum battery performance and longevity.Flexible expansionGrowatt's ark battery system offers a high degree of flexibility thanks to its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Another innovation of the ark system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand.Technical data:Input/output voltage range: 90~585VRated current: 25AProtection class: ip65Temperature range: -10~50° CDimension: 650 x 260 x 185 mmCommunication: CANWeight: 8.5 kgConnection cable set for inverterThe Growatt battery cable set is required to connect Growatt ark2.5h-a1 batteries to inverters of the three-phase sph or spa series.2x 2m power cable (plus/minus)2m communication cableark battery baseThe Growatt ark battery base is suitable for the ground installation of Growatt ark battery modules and ensures that the battery tower stands securely. The Growatt ark system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated bms can be stacked on one base.for floor mounting of Growatt ark hv and xh batteriesone base per battery towerWeight: 3kg

In this bundle from Offgridtec (mpn 016110), in addition to the Pylontech us5000 LiFePO4 battery, you will also receive matching brackets, which are useful for better air circulation and vertical stacking of the batteries. You will also receive an inverter connection set for connecting all components. Below the description you will find a list of compatible inverters that have been tested by the manufacturer in conjunction with the battery storage system. One Kompatibilitätsliste for Pylontech with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our appendices! (Pylontech Compatibility List) The Pylontech us5000 contains: 4x Pylontech us5000 LiFePO4 4x Pylontech Bracket for us5000 1x Pylontech Battery connection cable set Pylontech to inverter Pylontech us5000 LiFePO4 The Pylontech us5000 is a lithium storage system of the latest generation. The storage system has been specially developed to meet the high demands placed on solar storage systems today. Even with regular deep discharges, the Pylontech us5000 guarantees maximum safety and a long service life thanks to the latest technology. In addition, the latest battery from the market-leading manufacturer, now with 4.8 kWh per module, once again offers a high level of safety. The battery management system (bms) built into each module regulates this by monitoring and balancing and offers protection against: Deep discharge and overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Continuous monitoring of the individual cell voltages (cell balance) Features Extremely cycle-resistant - over 6000 cycles at 95% DoD Service life over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging capacity possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function, which is able to reduce the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect the ESS system from overvoltage function Modular design The system has a modular design and can be configured precisely to the required storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) battery and an integrated BMS. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech us5000 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Technical data Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48V Nominal capacity: 4800 Wh Usable capacity (95% DoD): 4560 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 200a (15sec) Max. (discharging) charging current: 120a (15min) Recommended charge/discharge current: 75A Communication: rs485, CAN Weight: 38 kg Dimensions: 442 x 420 x 161 mm Protection class: IP20 Charging temperature range: 0°C - +55°C Discharge temperature range: -10°C - +55°C Storage temperature range: -20°C - +60°C Service life: over 15 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 year manufacturer's warranty Certification: TÜV, ce, UN38.8 Pylontech Brackets The Pylontech brackets are used to stack the us5000 pylon battery modules vertically. These stackable brackets allow you to stack the Pylontech us5000 batteries and thus ensure the best possible air circulation for the batteries. The batteries should not be stacked directly on top of each other without spacing. a clamping device on the sides of the bracket can be used to connect and secure stacked brackets together. A maximum of 4 batteries can be stacked on top of each other in this way. One set consisting of two holders is required per Pylontech battery. Features Best possible air circulation Connecting and securing stacked brackets via clamping device Up to four batteries can be stacked Set of two brackets for one battery Connection set The Pylontech battery connection cable set (mpn bw0us3000bal0002) includes 2 x 2 meter cables (plus/minus) with a cross-section of 25mm² each and a CAN data cable with rj45 connectors on both sides. the set is required to connect the batteries of Pylontech with an inverter. Contents 2m cable plus with m8 ring cable lug and amphenol connection (Pylontech) 2m cable minus with m8 ring terminal lug and amphenol connection (Pylontech) CAN data cable with rj45 connectors on both sides

The Powercube x1 v2 high-voltage battery storage set from Pylontech is characterized by its modular and stackable design, which makes the system highly adaptable and can be expanded to up to 16.8kWh in a tower if required. A battery tower can be set up with a minimum of 2 to a maximum of 10 h48050 high-voltage battery modules. Each module has a capacity of 2.4 kWh and is connected in series. The system is only complete with the sc500-100s battery management system with additional connection cable set. If several towers are to be put into operation together, the Mbms control module is available as an option. Caution: The Powercube does not have a soft start circuit! One Kompatibilitätsliste for Pylontech with over 30 brands and companies, including Victron Energy, Growatt, Solis and many more, can be found as a download in our appendices! (Pylontech Compatibility List) The Powercube x1 v2 series: >5000 cycles at 90% DoD LiFePO4 cell technology High cycle stability and long service life Expandable from 4.8kWh to 24kWh capacity Automatic management of charging and discharging current Self-cooling mode reduces system noise Low self-discharge, no memory effect Flexible and stackable Very low failure rate Comprehensive protection and monitoring functions Powercube x1 high-voltage battery module h48050 The h48050 (v2) battery module from Pylontech is a high-voltage storage system with LiFePO4 cell technology and offers you a very long service life with high cycle stability. The flexible and stackable concept enables flexible application for different scenarios and is very easy to install. With a nominal voltage of 48v and a capacity of 2.4 kWh, the battery offers you outstanding performance under high loads. High cycle life The Pylontech h48050 battery modules are an ideal storage solution for photovoltaic systems due to their extremely long cycle life and the use of LiFePo4 cells. Regardless of whether it is a grid-connected or off-grid system, the Powercube x1 storage system offers numerous advantages compared to conventional lead batteries and other lithium technologies. Technical data: Battery chemistry: LiFePO4 Capacity: 2.4 kWh Nominal voltage: 48v Operating voltage range: 45-54V Nominal capacity: 50 Ah Max. Charging current: 50A Discharge depth: 90% Communication: RS232/CAN Protection class: IP20 Weight: 24 kg Operating temperature range: 0°C - +50°C Storage temperature: -20°C - +60°C Dimensions: 442 x 390 x 100 mm Certificate: TÜV (iec62619), UN38.3 bms control unit The SC0500-100S-v2 from Pylontech acts as a central unit for monitoring and controlling the latest generation. The bms forms an important part of the Powercube x1 high-voltage battery system and enables seamless communication with compatible inverters. To complete the entire system, a further 2-10 battery modules can be connected in addition to the bms, with each high-voltage battery having a capacity of 2.4 kWh. These are connected in series to form a battery tower with a control unit, which can have a maximum capacity of 24kWh. If several towers are to be connected in parallel, one control unit is required per tower. The Powercube x1 control unit protects against: Deep discharge and overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity monitoring functions: Operation recording Current Voltage Temperature State of charge Technical data: Operating voltage range: 60~600V Max. Charging/discharging current: 100A Protection class: IP20 Power consumption: 8W Operating temperature range: -20°C - +65°C Storage temperature range: -40°C - +80°C Communication: Modbus RTU/CAN Dimensions. 442 x 390 x 132 mm Weight: 8.5 kg Scope of delivery: 2-10x Pylontech Powerube x1 v2 high-voltage storage system 2.4kWh (depending on selection) 1x Pylontech Powercube x1 v2 control unit bms 1x connection cable set

With the luna2000-15-s0 battery storage system from Huawei is one of the three Huawei luna2000 battery systems that feature the proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. The good cycle stability and high load capacity make the battery storage system an ideal partner for a powerful photovoltaic system, which can charge the storage system several times a day. The luna2000 is modularly expandable and cascadable.In addition to the 15kWh battery modules, the luna2000-15-s0 battery storage system has a battery management system (bms), which is built into every fully-fledged Huawei battery system and therefore offers a high level of safety. The individual cells are monitored internally and protected against overvoltage, overtemperature, deep discharge, etc. in a balanced manner.Other systems:Huawei luna2000-05-S0Huawei luna2000-10-S0Compatible inverters:SUN2000-2/3/3,68/4/4,6/5/6KTL-L1SUN2000-3/4/5/6/8/10KTL-M0SUN2000-3/4/5/6/8/10KTL-M1CharacteristicsLiFePO4 storage technologyFlexible expansionIntegrated bmsMulti-scenario and multi-working modeFlexible scalabilityIntelligent operation and maintenance processesCompact and space-savingProven safetyService life over 10 yearsCompatible with many invertersHigh charging and discharging capacity possibleSimple installation and easy replacementBattery management system in every operating systemThe luna bms control module from Huawei is a battery management system that protects every battery module in the luna2000 series from unfavorable conditions and thus ensures safe and failure-free continuous operation. It does not matter how many storage modules are in use. The important thing is that one bms is used per tower. A tower consists of a maximum of three 5kWh battery modules, resulting in a capacity of 5-15kWh.Protection against:Deep discharge and overchargingOvervoltage during chargingexcessive currents during charging and dischargingOver- and undertemperatureShort circuit and reverse polarityMulti-scenario and multi-working modeThe system's on-grid and off-grid scenarios and modes allow users to view the total charging capacity of the product life cycle in real time.High cycle lifeThe extremely long cycle life of the LiFePo4 cells used make Huawei luna2000 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Huawei storage system offers several advantages over typical lead-acid batteries and other lithium technologies.Intelligent operation and maintenance proceduresThe factory settings of the system meet the requirements of the target markets. The battery can be started by pressing a single switch and supports black start. The integrated LED display of the operation management system shows the status. In addition, each user can also use the app function to carry out operations on site or remotely. Commissioning is carried out by recognizing the product in the app. With the cloud data management system, the battery can be managed anytime and anywhere.Technical specificationsBattery type: Lithium iron phosphate (LiFePo4)Nominal voltage (1-phase inverter/L1): 450 VOperating voltage range (1-phase inverter/L1): 350-560 VNominal voltage (3-phase inverter/M1): 600 VOperating voltage range (3-phase inverter/M1): 600-980 VNominal capacity: 15000 WhNormal discharge power: 5 kWMaximum discharge power: 7 kW, 10sCommunication: rs485, can (parallel operation only)Weight: 163.8 kgDimensions: 670 x 150 x 1320 mmProtection class: IP66Operating temperature range: -20°C - +55°CInstallation: Stand (standard), wall mounting (optional)Cooling: Confection coolingWarranty: 10-year manufacturer's warrantyCertificates: ce, rcm, cec, vde2510-50, iec62619, iec60730, UN38.3Due to the classification as dangerous goods, this product is shipped by a forwarding agent!Scope of delivery:3x Huawei luna2000-5-E0 battery module 5kWh1x Huawei luna bms control module

The EcoFlow Power Kit with the 2kWh battery can be combined in a wide variety of ways to generate energy for carefree, off-grid living and motorhome travel - in a small space. The modular energy system is the world's first compact energy solution designed specifically for small homes and motorhomes. These customizable plug and play power systems are now simpler than ever and can be adapted to your individual requirements.About the EcoFlow power kits4 charging methods4 different inputs for motorhomes (solar power input, vehicle generator input, shore power input, smart generator input)2 different inputs for off-grid living (solar power input, smart generator input)Intelligent controlsCompact and integrated designEasy to assembleSpace saving48v, a safe, smaller solutionThe 2 kWh power kits are available in 3 different sets:Get Set Kit:2kWh batteryPower HubCable packagePrepared Kit:2kWh batteryPower HubAC/dc distribution boxCable packageIndependence Kit eu:2kWh batteryPower HubAC/dc distribution boxConsoleCable package2kWh battery moduleThe 2kWh battery from EcoFlow is equipped with the latest LiFePO4 cell technology and offers you high cycle stability and longevity. The modular, stackable concept enables flexible use of up to 4 kWh and is easy to install. It also boasts a nominal voltage of 51.2v and a capacity of 2048Wh. The built-in battery management system (bms) and the integrated car heating system ensure that the battery runs safely and can be charged quickly even at low temperatures. In addition to the 2kWh variant listed here, the 5kWh-Variant can also be purchased.About the 2kWh LFP batteryLiFePO4 technologyModular and stackableExtended bms for battery protectionIntelligent control with the EcoFlow appBattery heaterSafe use with hot-swap functionExpandable up to 4kWhAutomatic heatingHeating during charging: The battery is equipped with a charging heating function that enables operation at low temperatures. The charging heater is automatically activated when the ambient temperature is below 0°C and the battery is in charging mode. The heater requires a charging power of >250W. As soon as the internal temperature of the battery rises above 5°C, the charging process can begin. When the internal temperature reaches over 10°C, the charging heater is deactivated and the charging process continues.Heating up when discharging: The capacity can be significantly reduced if the battery is discharged at high power at a low temperature. To counteract this problem, it is equipped with a discharge heating function. This function can be activated manually via the EcoFlow app. If the internal temperature of the battery is below 0°C and the state of charge of the battery is >70%, you can activate the discharge heater in the app. The function is automatically deactivated if the state of charge is <50% or the internal temperature of the battery is above 10°C.Technical dataCapacity: 2048 Wh (40 Ah)Nominal voltage: 51.2 VCharge cut-off voltage: 57.6 VDischarge cut-off voltage: 40 VMax. Charging current: 32 AMax. Discharge current: 80 ADimensions: 348 x 198 x 285 mmWeight: 17.1 kgStorage temperature: -20°C to 50°COperating temperature: -20°C to 50°CCycles: 3000 to 80% capacityProtection class: IP54Power HubThe Power Hub from EcoFlow is equipped with a 3600w AC output and includes two MPPT solar charge controllers, a dc/dc battery charger with mppt, an inverter charger and a dc-dc step-down converter. With all these components, you are ideally equipped to supply your tiny house or camper with energy. Its intelligent MPPT algorithm enables fast tracking and optimum solar yield. To protect the generator, the battery charger automatically adjusts the current.About the Power HubOutstanding MPPT algorithmBluetooth, wifi, mobile appVarious operating modesX-Boost (enables an AC output of 5000W to be achieved)X-Stream (fast charging with 3000w AC input)CompatibleAutomatic adjustmentsEfficiency and protectionEasy to use and installX-Boost functionX-Boost technology allows this product to supply an appliance with a maximum power of 5200w (for heaters only) while the rated output power remains at 3600w to prevent operational failure due to overload protection. The function is not available if the AC output is operated in bypass mode. The function is also not suitable for all appliances. It is particularly suitable for heating and motorized appliances, but not for products with voltage protection, such as precision instruments.Operating modesBypass mode: When the appliance is connected to an external AC source and the AC output is switched on, the system switches to bypass mode. The AC output is powered by the external AC supply while the LFP battery is charged by the external AC supply. If no external AC source is available, this product will automatically switch to inverter mode. In this mode, the AC output is reactivated for power supply within only 30ms.Inverter mode: If no external AC power source is available, the inverter provides AC power via current output.Standby mode: If both the AC output and the dc output of the device are permanently deactivated and no charging input is made within 20 seconds, the device switches to standby mode to reduce energy consumption. It can be reactivated by pressing the dc out or AC out button.Technical dataAC main outputPure sine wave voltagePower: 3600 WVoltage: 230 VFrequency: 50 HZAC standard outputVoltage: 230 VCurrent: 10 ADirect current output13.6 v, 70 a, max. power 1000Wor26.4 v, 60 a, max. power 1600WMaximum power supported by X-Boost5200 WAC input voltage: 220-240 VDimensions: 30 x 48 x 14cmWeight: 14kgStorage temperature: -25°C to 60°COperating temperature: -25°C to 60°CAC/dc distribution boxThe intelligent Distribution box from EcoFlow simplifies installation and improves the safety and clarity of power distribution with an easy-to-connect plug and clear LED indicators. It also supports two installation methods. One is inline installation and the other is direct wall mounting. With an easy-to-wire plug and clear LED indicators, the intelligent distribution box offers simple set-up and makes setting up power distribution safer and clearer.Technical dataAC input: 220-240v, 50HzMaximum input current: 30Adc output: 10-30v dcMaximum input current 70AWeight: 2,6kgDimensions: 354 x 210 x 98mmOperating temperature: -25°C to 60°CStorage temperature: -25°C to 60°CConsoleWith the Power Kit Console from EcoFlow, you can manage your entire power supply system via the touchscreen, which is installed either in your motorhome or in your own property. Monitor your own consumption in real time, adjust the settings and keep an eye on your energy requirements. To protect the system and improve its functionality, update the firmware regularly.Software functionsDisplay of the battery levelRemaining charging and discharging timeInput and output powerSetting the AC/dc output switchSetting the dc output voltageSetting the dc output dataSetting the AC inputSetting the maximum discharge levelSetting the minimum charge levelFunctions of the USB portUSB-C: Used for a software upgrade or emergency power supply (not required)USB-A: Supports a 5V/1A power output that can power some USB peripherals, such as MiFi modules. (MiFi = mobile WiFi, mobile hotspot)Technical datadc input/RJ45: 12V/1a, max. 12Wdc input/USB-C: 5V/2a, max. 10Wdc output/USB-A: 5V/1a, max. 5WWeight: 450gDimensions: 204.5 x 113.3 x 22.3 mmScreen size: 154.2 x 85.9 mmScreen resolution: 1024 (h) x 600 (V)Operating temperature range: -20°C - +50°CTouch operation: Supported

The Force-H1 3.55 kWh battery module from Pylontech (mpn: fh48074) represents an innovative high-voltage battery solution of the latest generation (v2), which is based on the proven LiFePO4 storage technology. These batteries are characterized by their outstanding longevity and high safety standards, even under demanding performance requirements. Thanks to their remarkable cycle stability and high load capacity, the battery storage systems are perfectly suited for use in combination with powerful photovoltaic systems. This enables multiple daily charging cycles and maximizes the use of the storage system. A Kompatibilitätsliste for suitable inverters for Pylontech batteries with over 30 brands and companies, including Victron Energy, Growatt, Solis and many more, can be found as a download in our appendices! (Pylontech Compatibility List) The Force-H1 series: LiFePO4 storage technology Cycle life: over 5000 at 95% DoD Dual active protection at BMS level High charging and discharging capacity possible Pre-charging function to protect the ESS system from overvoltage function Reliable performance thanks to durable components Flexibly expandable Compact and space-saving Service life over 15 years Compatible with many available inverters Easy installation thanks to modular design Flexible expansion With the Force-H1 series, the flexible configuration of the capacity comes to the fore. This can be expanded from 7.1 kWh to 24.86 kWh per tower. A total of up to 6 battery towers are possible. The modular design is simple and therefore allows easy installation with uncomplicated connection of the cables. Another advantage of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Thanks to its versatile and space-saving use, the Force H1 series is suitable for a wide range of application scenarios. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech Force-H1 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Optimum coverage of self-consumption In residential buildings, the energy demand is higher in the morning and evening, while the solar energy generated only reaches its maximum value at midday. The battery storage systems in the Force series from Pylontech compensate for this difference between consumption and generation of electrical energy. Even a small battery storage system with a capacity of up to 15 kWh can noticeably optimize self-consumption in a multi-person household and counteract the constantly rising cost of electricity. Larger storage systems enable a longer service life by specifically reducing the depth of discharge or increase the reserves in the event of a cloudy day or power outage. Technical data Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48v DC Storage capacity: 3552 Wh Communication: can, Modbus Weight: 36 kg Dimensions: 600 x 380 x 170 Protection class: IP55 Operating temperature range: 0 - +50°C Storage temperature range: -20°C - +60°C Warranty: 15-year manufacturer's warranty Certification: vde2510-50,iec62619, iec62477-1, iec62040-1, cec, CE, UN38.8 Due to the classification as dangerous goods, this product will be shipped by a forwarding agent! Scope of delivery: 1x Pylontech Force-H1 3.55 kWh 48v storage system 1x 3.5m DC cable set 1x rj45 data cable 1x mounting screws 1x instruction manual

With the luna2000-5-s0 battery storage system from Huawei is one of the three Huawei luna2000 battery systems that feature the proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. The good cycle stability and high load capacity make the battery storage system an ideal partner for a powerful photovoltaic system, which can charge the storage system several times a day. The luna2000 is modularly expandable and cascadable.In addition to the 5kWh battery module, the luna2000-5-s0 battery storage system has a battery management system (bms), which is built into every fully-fledged Huawei battery system and therefore offers a high level of safety. Internally, the individual cells are monitored and protected against overvoltage, overtemperature, deep discharge, etc. in a balanced manner.Other systems:Huawei luna2000-10-S0Huawei luna2000-15-S0Compatible inverters:SUN2000-2/3/3,68/4/4,6/5/6KTL-L1SUN2000-3/4/5/6/8/10KTL-M0SUN2000-3/4/5/6/8/10KTL-M1CharacteristicsLiFePO4 storage technologyFlexible expansionIntegrated bmsMulti-scenario and multi-working modeFlexible scalabilityIntelligent operation and maintenance processesCompact and space-savingProven safetyService life over 10 yearsCompatible with many invertersHigh charging and discharging capacity possibleSimple installation and easy replacementBattery management system in every operating systemThe luna bms control module from Huawei is a battery management system that protects every battery module in the luna2000 series from unfavorable conditions and thus ensures safe and failure-free continuous operation. It does not matter how many storage modules are in use. The important thing is that one bms is used per tower. A tower consists of a maximum of three 5kWh battery modules, resulting in a capacity of 5-15kWh.Protection against:Deep discharge and overchargingOvervoltage during chargingexcessive currents during charging and dischargingOver- and undertemperatureShort circuit and reverse polarityMulti-scenario and multi-working modeThe system's on-grid and off-grid scenarios and modes allow users to view the total charging capacity of the product life cycle in real time.High cycle lifeThe extremely long cycle life of the LiFePo4 cells used make Huawei luna2000 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Huawei storage system offers several advantages over typical lead-acid batteries and other lithium technologies.Intelligent operation and maintenance proceduresThe factory settings of the system meet the requirements of the target markets. The battery can be started by pressing a single switch and supports black start. The integrated LED display of the operation management system shows the status. In addition, each user can also use the app function to carry out operations on site or remotely. Commissioning is carried out by recognizing the product in the app. With the cloud data management system, the battery can be managed anytime and anywhere.Technical specificationsBattery type: Lithium iron phosphate (LiFePo4)Nominal voltage (1-phase inverter/L1): 450 VOperating voltage range (1-phase inverter/L1): 350-560 VNominal voltage (3-phase inverter/M1): 600 VOperating voltage range (3-phase inverter/M1): 600-980 VNominal capacity: 5000 WhNormal discharge power: 2.5 kWMaximum discharge power: 3.5 kW, 10sCommunication: rs485, can (parallel operation only)Weight: 63.8 kgDimensions: 670 x 150 x 600 mmProtection class: IP66Operating temperature range: -20°C - +55°CInstallation: Stand (standard), wall mounting (optional)Cooling: Confection coolingWarranty: 10-year manufacturer's warrantyCertificates: ce, rcm, cec, vde2510-50, iec62619, iec60730, UN38.3Due to the classification as dangerous goods, this product is shipped by a forwarding agent!Scope of delivery:1x Huawei luna2000-5-E0 battery module 5kWh1x Huawei luna bms control module

The Pylontech H1 storage system embodies the future of energy storage. With a modular design, it redefines versatility. From 7.1 kWh to a maximum 149.1 kWh capacity, the stackable high voltage system offers flexible configurations that seamlessly adapt to your needs. The redesign of this system simplifies installation with effortless connections, saving installers valuable time. Whether for indoor or outdoor use, the H1 storage system is synonymous with reliability and safety. With the ability to connect up to 7 systems to one bms and 6 battery towers in parallel, the Pylontech H1 storage system redefines the boundaries of energy availability. A Kompatibilitätsliste for suitable inverters for Pylontech batteries with over 30 brands and companies, including for example Victron Energy, Growatt, Solis and many more, can be found as a download in our attachments! (Pylontech Compatibility List) The Force H1 system contains Pylontech Force-H1 3.55 kWh 48v storage (2-7 modules depending on selection) Pylontech Force-H1 control unit bms 3.5m DC cable set RJ45 data cable Mounting screws Operating instructions The Force-H1 series: LiFePO4 storage technology Cycle life: over 5000 at 95% DoD Dual active protection at bms level High charging and discharging capacity possible Pre-charging function to protect the ESS system from overvoltage function Reliable performance thanks to durable components Flexibly expandable Compact and space-saving Service life over 15 years Compatible with many available inverters Easy installation thanks to modular design Flexible expansion With the Force-H1 series, the flexible configuration of the capacity comes to the fore. This can be expanded from 7.1 kWh to 24.86 kWh per tower. A total of up to 6 battery towers are possible. The modular design is simple and therefore allows easy installation with uncomplicated connection of the cables. Another advantage of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Thanks to its versatile and space-saving use, the Force H1 series is suitable for a wide range of application scenarios. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech Force-H1 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Optimum coverage of self-consumption In residential buildings, the energy demand is higher in the morning and evening, while the solar energy generated only reaches its maximum value at midday. The battery storage systems in the Force series from Pylontech compensate for this difference between consumption and generation of electrical energy. Even a small battery storage system with a capacity of up to 15 kWh can noticeably optimize self-consumption in a multi-person household and counteract the constantly rising cost of electricity. Larger storage systems enable a longer service life by specifically reducing the depth of discharge or increase the reserves in the event of a cloudy day or power outage. Intuitive control panel with LED displays The control panel on the control unit makes it possible to check the current status of the battery tower at any time. The panel also allows the communication speed (baud rate) to be set directly on the unit. Technical data Force-H1 bms Dimensions: 600 x 380 x 150 mm Weight: 14 kg Manufacturer part number: FC0500-40S-V2 The Force-H1 bms protects against: Deep discharge and overcharging overvoltage during charging currents too high during charging and discharging over- and undertemperature Short circuit and reverse polarity Technical data Force-H1 battery Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48v DC Storage capacity: 3552 Wh Communication: can, Modbus Weight: 36 kg Dimensions: 600 x 380 x 170 Protection class: IP55 Operating temperature range: 0 - +50°C Storage temperature range: -20°C - +60°C Warranty: 15-year manufacturer's warranty Certification: vde2510-50,iec62619, iec62477-1, iec62040-1, cec, CE, UN38.8 Due to the classification as dangerous goods, this product will be shipped by a forwarding agent!

The hvm battery box from byd offers you a usable storage capacity of at least 8.3kWh and can easily be expanded to a maximum capacity of 22.1kWh per tower with additional high-voltage battery modules. To achieve the maximum capacity of 66.2kWh, up to 3 identical hvm towers can be connected directly in parallel. It is also possible to expand the system later by adding further hvm modules or parallel hvm towers. This makes it ideal for operating power-intensive consumers and supports you even in the event of a power failure thanks to the integrated emergency power function, as well as in off-grid operation. The hvm series is once again equipped with state-of-the-art LFP battery cells, which are known for their longevity and safety. Powerful emergency/standby power Off-grid function Patented modular plug-in design Good scalability Award-winning efficiency thanks to true series connection Compatible with leading 1- and 3-phase inverters Cobalt-free lithium iron phosphate battery (LFP) Highest safety standards according to vde2510-50 / iec62619 / cec / ce / UN38.3 The byd hvm set contains: byd hvm 2.76kWh modular high-voltage battery module (3-8x depending on selection) 1x byd HVS/hvm battery control unit+ base A Compatibility list for byd with over 30 inverter models, including Fronius, GoodWe, SMA and Sungrow, for example, can be found as a download in our appendices (Compatible Inverter List). Battery module hvm 2.76 kWh The hvm 2.76 kWh high-voltage battery module from byd impresses with its high cycle stability and remarkable longevity thanks to its LiFePO4 technology. The modular and stackable design of the battery allows versatile use in various scenarios and is characterized by very uncomplicated installation. It offers outstanding performance, even under high loads. Alongside the battery management system and the base, the battery is the main indicator of the byd hvm Battery Box Premium. This storage system is very easy to expand from 3 to 8 modules in series without cables. The parallel connection of up to 3 identical battery boxes also enables a maximum capacity of 66.2 kWh. The new system generation The new byd generation is based on the tried-and-tested storage systems and offers all the previous functions. You are launching a battery module on the market that has a higher storage capacity than its predecessor. Further development of the cell technology has reduced the system weight by almost 30 % and the installation depth by 8 cm, which requires less floor space and results in a slimmer appearance. A highlight of the new storage units is their IP55 protection class, which allows them to be used outdoors. In addition, the new generation offers even more flexibility and scalability. Up to three battery towers can now be connected to form a system. In terms of charging and discharging capacity, byd remains true to its line, as each battery can also deliver its nominal capacity as power, i.e. 1c. This makes the new series ideal for on-grid, on-grid plus backup and off-grid systems. Modular battery system The hvm Battery-Box can be configured with 3 to 8 hvm battery modules arranged in a series connection. This allows a capacity of 8.3 to 22.1kWh to be achieved. To achieve the maximum capacity of 66.2kWh, up to 3 identical hvm towers can be connected directly in parallel. It is also possible to expand the system later by adding further hvm modules or parallel hvm towers. Supplied with power at all times: byd backup power and off-grid function The hvm set is extremely versatile and can be used in both on-grid and off-grid systems. Its integrated emergency power function is particularly practical and often in demand. This enables the system to supply the entire household with power in the event of a power failure, either on one or three phases. The prerequisite for this is a compatible hybrid or storage inverter that supports both an emergency power and an off-grid function. A list of compatible inverters can be found in the "Downloads" section. Power and storage capacity: scalability made easy byd attaches great importance to the scalability of its storage systems. The new B-Box hvm is easy to retrofit and enables simple expansion. A simple plug-in connection eliminates any cable clutter and unnecessary complexity in the product design. It is possible to add additional storage modules. Furthermore, by connecting up to three storage towers in parallel, a maximum storage capacity of 66.2kWh and a discharge capacity of 66.2kW can be achieved. It is important to note that each storage tower must have the same number of modules. Technical parameters per battery Capacity: 2.76 kWh Max. Output current: 50A Peak output current: 75a (3sec) Rated voltage: 51.2V Voltage range: 40~59V Dimensions: 233 x 585 x 298 mm Weight: 38 kg Operating temperature range: -10°C - +50°C Protection class: IP55 Battery efficiency: >96% Communication: can / RS485 Manufacturer's warranty: 10 years Control unit and base The byd battery control unit and base provides protection, monitoring and a secure stand for the byd high-voltage battery storage system. This small set of 2 components can be used for the hvs and for the hvm battery box. Technical parameters Control unit dimensions: 180 x 585 x 298 mm Base dimensions: 100 x 585 x 298 mm Weight: 15 kg Protection class: IP55 Max. Discharge depth: 100% Manufacturer's warranty: 10 years

The modular concept of the Growatt apx battery system enables a wide range of applications and flexible expansion as required. Between 1 and 6 high-voltage batteries can be installed within a battery tower. The battery module is a high-voltage battery that features the latest LiFePO4 technology and boasts a nominal energy of 5kWh. The body also includes a battery management system of the latest generation, which protects the battery modules from adverse conditions, and a battery base that ensures a secure stand during ground installation. As an option, a back-up box can be added for emergency power generation. It is able to provide up to 10kWh from the solar storage system in the event of a power failure.The apx battery system contains:apx 5.0p-b1 high-voltage battery 5kWh LiFePO4 (1-6x depending on selection)apx 98034-p2 power module bmsapx battery base High-voltage batteryOptional: syn 50 xh 30 Back-Up Box emergency backup powerThe apx battery system demonstrates its flexible configuration options. These can be extended from 5kWh to 30kWh. The simple design makes installation and expansion very straightforward with the help of cables. A further advance of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only the corresponding battery base is required for a secure stand. The apx series supports the combination of mixed battery packs from new and old batches, as well as different capacities.apx 5.0p-b1 high-voltage batteryThe apx 5.0p-b1 battery module from Growatt is a high-voltage battery with proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. In addition, the modular energy optimization ensures that the system fully utilizes the energy of each battery. In order to achieve a very flexible system application, old and new battery batches as well as batteries with different capacities can be mixed and connected. Soft start is used to avoid overvoltage in the system.The apx high-voltage battery:Flexible capacity options up to 30kWhCobalt-free LiFePO4 storage technology90% depth of discharge (DoD)Active protection at bms levelIntegrated modular energy optimizationSupports the combination of new and old battery modules in one systemSoft start to avoid overvoltages in the systemModular and stackable designEasy installation10-year manufacturer's warrantyLong cycle lifeThe apx battery system relies on LiFePO4 chemistry without cobalt and offers a four-stage protection mechanism through a battery management system (bms), modular energy optimization, a fuse and aerosol. This ensures increased safety, reliability and a long service life. The modular energy optimization ensures that the system fully utilizes the energy of each individual battery. Regardless of whether the solar system is grid-connected or stand-alone, Growatt storage offers several advantages over typical lead-acid batteries and other lithium technologies.Soft start to protect the systemThe soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system.Technical data:Battery type: Lithium iron phosphate (LiFePo4)Nominal voltage: 385VNominal energy: 5kWhOperating voltage range: 330-450VWeight: 50kgDimensions: 690 x 185 x 295 mmProtection class: IP66Ambient temperature: -10°C - +50°CCooling: Natural convectionWarranty: 10 year manufacturer's warrantyBattery management systemThe new Growatt apx 98034-p2 battery management system (MPN 98034-p2) is a control unit of the latest generation that protects each apx battery module from adverse conditions and ensures safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. What is important is that one bms is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt apx 5.0p-b1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh.Monitoring parametersSOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperatureTechnical data:Dimensions: 690 x 185 x 295 mmWeight: 15kgMax. Current: 30APeak current: 34a, 60sCommunication: RS485/CANBattery baseThe Growatt apx Battery Base is suitable for the floor installation of Growatt apx battery modules and the associated bms. It ensures that the battery tower stands securely. The Growatt apx system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated bms can be stacked on one base.for floor mounting of Growatt apx batteries and associated bmsone base per battery towerDimensions: 690 x 185 x 50 mmsyn 50-xh-30 Back-UP BoxThe syn 50-xh-30 from Growatt is a back-up box that acts as an emergency backup power supply for the home. It is able to provide up to 10kW from the solar storage system in the event of a power failure. The switchover time is 0.5 seconds. The Back-Up Box is characterized by a user-friendly design, which enables uncomplicated installation and operation.The syn Back-Up Box:Backup power supply for the entire house, up to 10 kW100% 3-phase asymmetrical outputIntegrated switchEasy to installCombination options with the entire Growatt MOD-xh BP seriesTechnical data:Max. Overcurrent protection AC input: 63 AMax. Continuous input current: 50 AAC output voltage: 230 v/400 VAC output voltage range: 180-280 VAC frequency: 50/60 HzAC frequency range: 45-65 HzAC rated power: 18 kWMax. continuous input current at 230v: 26.1 APeak AC power in backup mode: 19.8k WAC peak current in backup mode: 28.7 ACommunication: RS485Operating temperature range: -40°C - +60°CProtection class: IP65Weight: 10.8 kgDimensions: 365 x 450 x 123 mmCompatible invertersThe following hybrid inverters are intended for the storage system:MOD 3KTL3-xh BPMOD 4KTL3-xh BP MOD 5KTL3-xh BP MOD 6KTL3-xh BP MOD 7KTL3-xh BP MOD 8KTL3-xh BP MOD 9KTL3-xh BP MOD 10KTL3-xh BP

The hvs-Battery Box from byd offers you a usable storage capacity of at least 5.12kWh and can easily be expanded to a maximum capacity of 12.8kWh per tower with additional high-voltage battery modules. To achieve the maximum capacity of 38.4kWh, up to 3 identical hvs towers can be connected directly in parallel. It is also possible to expand the system later by adding further hvs modules or parallel hvs towers. This makes it ideal for the operation of power-intensive consumers and supports you even in the event of a power failure, thanks to the integrated emergency power function, as well as in off-grid operation. The hvs series is once again equipped with state-of-the-art LFP battery cells, which are known for their longevity and safety. Powerful emergency/standby power Off-grid function Patented modular plug-in design Good scalability Award-winning efficiency thanks to true series connection Compatible with leading 1- and 3-phase inverters Cobalt-free lithium iron phosphate battery (LFP) Battery control unit and battery base Highest safety standards according to vde2510-50 / iec62619 / cec / ce / UN38.3 The byd hvs set contains: byd hvs 2.56kWh modular high-voltage battery module(2-5x depending on selection) 1x byd hvs/hvm battery control unit+ base A Compatibility list for byd with over 30 inverter models, including Fronius, GoodWe, SMA and Sungrow, for example, can be found as a download in our appendices (Compatible Inverter List). Battery module hvs 2.56 kWh The hvs 2.56 kWh high-voltage battery module from byd impresses with its high cycle stability and remarkable longevity thanks to its LiFePO4 technology. The modular and stackable design of the battery allows versatile use in various scenarios and is characterized by very uncomplicated installation. It offers outstanding performance, even under high loads. Alongside the battery management system and the base, the battery is the main indicator of the byd hvs Battery Box Premium. This storage system is very easy to expand up to 5 modules in series without cables. The parallel connection of up to 3 identical battery boxes also enables a maximum capacity of 38.4 kWh. The new system generation The new byd generation is based on the tried-and-tested storage systems and offers all previous functions. You are launching a battery module on the market that has a higher storage capacity than its predecessor. Further development of the cell technology has reduced the system weight by almost 30 % and the installation depth by 8 cm, which requires less floor space and results in a slimmer appearance. A highlight of the new storage units is their IP55 protection class, which allows them to be used outdoors. In addition, the new generation offers even more flexibility and scalability. Up to three battery towers can now be connected to form a system. In terms of charging and discharging capacity, byd remains true to its line, as each battery can also deliver its nominal capacity as power, i.e. 1c. This makes the new series ideal for on-grid, on-grid plus backup and off-grid systems. Modular battery system The hvs Battery-Box can be configured with 2 to 5 hvs battery modules arranged in a series connection. This allows a capacity of 5.1 to 12.8kWh to be achieved. To achieve the maximum capacity of 38.4kWh, up to 3 identical hvs towers can be connected directly in parallel. It is also possible to expand the system later by adding further hvs modules or parallel hvs towers. Supplied with power at all times: byd backup power and off-grid function The hvs set is extremely versatile and can be used in both on-grid and off-grid systems. Its integrated emergency power function is particularly practical and often in demand. This enables the system to supply the entire household with power in the event of a power failure, either on one or three phases. The prerequisite for this is a compatible hybrid or storage inverter that supports both an emergency power and an off-grid function. A list of compatible inverters can be found in the "Downloads" section. Power and storage capacity: scalability made easy byd attaches great importance to the scalability of its storage systems. The new B-Box hvs is easy to retrofit and enables simple expansion. A simple plug-in connection eliminates any cable clutter and unnecessary complexity in the product design. It is possible to add additional storage modules. Furthermore, by connecting up to three storage towers in parallel, a maximum storage capacity of 38.4 kWh and a discharge capacity of 38.4 kW can be achieved. It is important to note that each storage tower must have the same number of modules. Technical parameters per battery Capacity: 2.56 kWh Max. Output current: 25A Peak output current: 50a (3sec) Rated voltage: 102.4V Voltage range: 80-115.2V Dimensions: 233 x 585 x 298 mm Weight: 38 kg Operating temperature range: -10°C - +50°C Protection class: IP55 Battery efficiency: >96% Communication: can / RS485 Manufacturer's warranty: 10 years Control unit and base The byd battery control unit and base provides protection, monitoring and a secure stand for the byd high-voltage battery storage system. This small set of 2 components can be used for the hvs and for the hvm battery box. Technical parameters Control unit dimensions: 180 x 585 x 298 mm Base dimensions: 100 x 585 x 298 mm Weight: 15 kg Protection class: IP55 Max. Discharge depth: 100% Manufacturer's warranty: 10 years