Blue PWM Pro
- Batteries
- Electronics
- Generators
- Installation
- Complete Systems
-
Brands
- AEconversion
- Bluetti
- BYD
- Canadian Solar
- EcoFlow
- EFOY
- Fothermo
- Growatt
- Hoymiles
- Huawei
- JA Solar
- Jinko Solar
- Jokari
- Kemo
- Lapp
- Longi
- Luxen Solar
- Mastervolt
- myStrom
- Offgridtec
- Pylontech
- Pytes
- Risen
- Steca
- Trina Solar
- Victron Energy
- Votronic
- Wattstone
- Wieland Electric
- Yingli
- Zendure
Filter
–
Blue PWM Pro
3 Results
Sorting
VAT-exempt delivery possible*
1-67-008475
Victron BlueSolar PWM-Pro 12V 24V 10A Solar Charge Controller
Though a sound beginner's device the Victron BlueSolar PWM-PRO 10A (MPN SCC010010010) provides several professional functions. It can by applied in 12V und 24V systems and is therefore widely usable.
Victron's BlueSolar-series provides more user comfort and possible configurations compared to the PWM-Light-series. Optionally a remote control display can be connected for an even more comfortable operation.
All control parameters can be programmed freely via remote panel or USB link + PC-software
Via the optional remote panel all relevant settings like charging voltage can be programmed freely. A feature normally found only in high-class devices. Specific charging and discharging voltage depending on the battery type as well as the switch-off/on tresholds of the consumer output can be adjusted. The remote panel is optional equipment and not included in the charge controller's delivery scope. You find this item in our shop under article number 8-67-008490.
A more economical alternative to the remote panel is the Victron USB link cable. Additionally you receive the Victron Pc software which allows full programming of your charge controller as well as the generation of comprehensive performance statistics. This cable is available in our shop under article number 1-67-008500.
Important features:
10A max. charging amperage, 10A max. solar performance
optional remote panel available
parameters like charging voltage freely programmable via remote panel
suitable for AGM, gel and lead-acid batteries
suitable for 12V and 24V battery voltage
fully programmable lighting control
full battery charging thanks to 3-step charging process
consumer output with overload and short-circuit protection as well as switch-off function to avoid battery deep discharge
optional temperature sensor available
reverse polarity protection for solar and battery input
Delivery scope:
1x Victron MPN SCC010010010 BlueSolar PWM-PRO 10A 12V 24V
1x Manual
Though a sound beginner's device the Victron BlueSolar PWM-PRO 10A (MPN SCC010010010) provides several professional functions. It can by applied i...
Shipped in 10-14 Werktage
Shipped in 10-14 Werktage
VAT-exempt delivery possible*
Though a sound beginner's device the Victron BlueSolar PWM-PRO 10A (MPN SCC010010010) provides several professional functions. It can by applied in 12V und 24V systems and is therefore widely usable.
Victron's BlueSolar-series provides more user comfort and possible configurations compared to the PWM-Light-series. Optionally a remote control display can be connected for an even more comfortable operation.
All control parameters can be programmed freely via remote panel or USB link + PC-software
Via the optional remote panel all relevant settings like charging voltage can be programmed freely. A feature normally found only in high-class devices. Specific charging and discharging voltage depending on the battery type as well as the switch-off/on tresholds of the consumer output can be adjusted. The remote panel is optional equipment and not included in the charge controller's delivery scope. You find this item in our shop under article number 8-67-008490.
A more economical alternative to the remote panel is the Victron USB link cable. Additionally you receive the Victron Pc software which allows full programming of your charge controller as well as the generation of comprehensive performance statistics. This cable is available in our shop under article number 1-67-008500.
Important features:
10A max. charging amperage, 10A max. solar performance
optional remote panel available
parameters like charging voltage freely programmable via remote panel
suitable for AGM, gel and lead-acid batteries
suitable for 12V and 24V battery voltage
fully programmable lighting control
full battery charging thanks to 3-step charging process
consumer output with overload and short-circuit protection as well as switch-off function to avoid battery deep discharge
optional temperature sensor available
reverse polarity protection for solar and battery input
Delivery scope:
1x Victron MPN SCC010010010 BlueSolar PWM-PRO 10A 12V 24V
1x Manual
Shipped in 10-14 Werktage
VAT-exempt delivery possible*
1-67-008480
Victron BlueSolar PWM-Pro 12V 24V 20A Solar Charge Controller
Though a sound beginner's device the Victron BlueSolar PWM-PRO 20A (MPN SCC010020110) provides several professional functions. It can by applied in 12V and 24V systems and is therefore widely usable.
Victron's BlueSolar-series provides more user comfort and possible configurations compared to the PWM-Light-series. Optionally a remote control display can be connected for an even more comfortable operation.
All control parameters can be programmed freely via remote panel or USB link + PC-software
Via the optional remote panel all relevant settings like charging voltage can be programmed freely. A feature normally found only in high-class devices. Specific charging and discharging voltage depending on the battery type as well as the switch-off/on tresholds of the consumer output can be adjusted. The remote panel is optional equipment and not included in the charge controller's delivery scope. You find this item in our shop under article number 8-67-008490.
A more economical alternative to the remote panel is the Victron USB link cable. Additionally you receive the Victron Pc software which allows full programming of your charge controller as well as the generation of comprehensive performance statistics. This cable is available in our shop under article number 1-67-008500.
Important features:
20A max. charging amperage, 20A max. solar performance
optional remote panel available
parameters like charging voltage freely programmable via remote panel
suitable for AGM, gel and lead-acid batteries
suitable for 12V and 24V battery voltage
fully programmable lighting control
full battery charging thanks to 3-step charging process
consumer output with overload and short-circuit protection as well as switch-off function to avoid battery deep discharge
optional temperature sensor available
reverse polarity protection for solar and battery input
Delivery scope:
1x Victron MPN SCC010020110 BlueSolar PWM-PRO 20A 12V 24V
1x Manual
Though a sound beginner's device the Victron BlueSolar PWM-PRO 20A (MPN SCC010020110) provides several professional functions. It can by applied i...
Shipped in 10-14 Werktage
Shipped in 10-14 Werktage
VAT-exempt delivery possible*
Though a sound beginner's device the Victron BlueSolar PWM-PRO 20A (MPN SCC010020110) provides several professional functions. It can by applied in 12V and 24V systems and is therefore widely usable.
Victron's BlueSolar-series provides more user comfort and possible configurations compared to the PWM-Light-series. Optionally a remote control display can be connected for an even more comfortable operation.
All control parameters can be programmed freely via remote panel or USB link + PC-software
Via the optional remote panel all relevant settings like charging voltage can be programmed freely. A feature normally found only in high-class devices. Specific charging and discharging voltage depending on the battery type as well as the switch-off/on tresholds of the consumer output can be adjusted. The remote panel is optional equipment and not included in the charge controller's delivery scope. You find this item in our shop under article number 8-67-008490.
A more economical alternative to the remote panel is the Victron USB link cable. Additionally you receive the Victron Pc software which allows full programming of your charge controller as well as the generation of comprehensive performance statistics. This cable is available in our shop under article number 1-67-008500.
Important features:
20A max. charging amperage, 20A max. solar performance
optional remote panel available
parameters like charging voltage freely programmable via remote panel
suitable for AGM, gel and lead-acid batteries
suitable for 12V and 24V battery voltage
fully programmable lighting control
full battery charging thanks to 3-step charging process
consumer output with overload and short-circuit protection as well as switch-off function to avoid battery deep discharge
optional temperature sensor available
reverse polarity protection for solar and battery input
Delivery scope:
1x Victron MPN SCC010020110 BlueSolar PWM-PRO 20A 12V 24V
1x Manual
Shipped in 10-14 Werktage
VAT-exempt delivery possible*
1-67-008485
Victron BlueSolar PWM-Pro 12V 24V 30A Solar Charge Controller
Though a sound beginner's device the Victron BlueSolar PWM-PRO 30A (MPN SCC010030010) provides several professional functions. It can by applied in 12V and 24V systems and is therefore widely usable.
Victron's BlueSolar-series provides more user comfort and possible configurations compared to the PWM-Light-series. Optionally a remote control display can be connected for an even more comfortable operation.
All control parameters can be programmed freely via remote panel or USB link + PC-software
Via the optional remote panel all relevant settings like charging voltage can be programmed freely. A feature normally found only in high-class devices. Specific charging and discharging voltage depending on the battery type as well as the switch-off/on tresholds of the consumer output can be adjusted. The remote panel is optional equipment and not included in the charge controller's delivery scope. You find this item in our shop under article number 8-67-008490.
A more economical alternative to the remote panel is the Victron USB link cable. Additionally you receive the Victron Pc software which allows full programming of your charge controller as well as the generation of comprehensive performance statistics. This cable is available in our shop under article number 1-67-008500.
Important features:
30A max. charging amperage, 30A max. solar performance
optional remote panel available
parameters like charging voltage freely programmable via remote panel
suitable for AGM, gel and lead-acid batteries
suitable for 12V and 24V battery voltage
fully programmable lighting control
full battery charging thanks to 3-step charging process
consumer output with overload and short-circuit protection as well as switch-off function to avoid battery deep discharge
optional temperature sensor available
reverse polarity protection for solar and battery input
Delivery scope:
1x Victron MPN SCC010030010 BlueSolar PWM-PRO 30A 12V 24V
1x Manual
Though a sound beginner's device the Victron BlueSolar PWM-PRO 30A (MPN SCC010030010) provides several professional functions. It can by applied i...
Shipped in 10-14 Werktage
Shipped in 10-14 Werktage
VAT-exempt delivery possible*
Though a sound beginner's device the Victron BlueSolar PWM-PRO 30A (MPN SCC010030010) provides several professional functions. It can by applied in 12V and 24V systems and is therefore widely usable.
Victron's BlueSolar-series provides more user comfort and possible configurations compared to the PWM-Light-series. Optionally a remote control display can be connected for an even more comfortable operation.
All control parameters can be programmed freely via remote panel or USB link + PC-software
Via the optional remote panel all relevant settings like charging voltage can be programmed freely. A feature normally found only in high-class devices. Specific charging and discharging voltage depending on the battery type as well as the switch-off/on tresholds of the consumer output can be adjusted. The remote panel is optional equipment and not included in the charge controller's delivery scope. You find this item in our shop under article number 8-67-008490.
A more economical alternative to the remote panel is the Victron USB link cable. Additionally you receive the Victron Pc software which allows full programming of your charge controller as well as the generation of comprehensive performance statistics. This cable is available in our shop under article number 1-67-008500.
Important features:
30A max. charging amperage, 30A max. solar performance
optional remote panel available
parameters like charging voltage freely programmable via remote panel
suitable for AGM, gel and lead-acid batteries
suitable for 12V and 24V battery voltage
fully programmable lighting control
full battery charging thanks to 3-step charging process
consumer output with overload and short-circuit protection as well as switch-off function to avoid battery deep discharge
optional temperature sensor available
reverse polarity protection for solar and battery input
Delivery scope:
1x Victron MPN SCC010030010 BlueSolar PWM-PRO 30A 12V 24V
1x Manual
Shipped in 10-14 Werktage